changelog
- Sat, 22 Jun 2024 11:28:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 22 Jun 2024 11:28:14 +0200] rev 537
- The iSpindel monitor, detail and chart screens try to use the polynomial calibration data to show the SG. Fallback to already logged data if this fails.
- Fri, 14 Jun 2024 08:45:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 14 Jun 2024 08:45:35 +0200] rev 536
- Version 0.5.0. Startup with the first tab active.
- Tue, 11 Jun 2024 17:52:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Jun 2024 17:52:12 +0200] rev 535
- In the checklist add pH check during the boil.
- Tue, 11 Jun 2024 16:47:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Jun 2024 16:47:11 +0200] rev 534
- Set correct background colours and pH tresholds for the final water and sparge water.
- Tue, 11 Jun 2024 15:51:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Jun 2024 15:51:17 +0200] rev 533
- Version 0.6.b2. In export to forum show the final treated water. Complete water recalculate if sparge water acid or ph is changed. Added and changed pH tooltips on the water tab. Added a line with total treated water to the product print.
- Sun, 09 Jun 2024 17:00:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 17:00:00 +0200] rev 532
- Don't update sparge volume when brew is done. Disabled some debug messages.
- Sun, 09 Jun 2024 16:12:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 16:12:09 +0200] rev 531
- Vertaling bijgewerkt. Minimale watertab layout aanpassing.
- Sun, 09 Jun 2024 15:20:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 15:20:26 +0200] rev 530
- Version 0.4.6b1 Update product with calculated sparge supply. This value is now only calculated from the desired sparge estimate plus HLT deadspace. Fixed brewing salts for sparge read-only after brewday. The final water displays the mixed mash and sparge water profile, almost the same as what goes into the boil kettle. The Cl/SO4 ratio display now works on the final water.
- Sun, 09 Jun 2024 11:47:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 11:47:41 +0200] rev 529
- Some code cleanup. Upgrade HLT settings during product load if the default settings are detected.
- Sat, 08 Jun 2024 16:58:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Jun 2024 16:58:52 +0200] rev 528
- Update total water volume.
- Sat, 08 Jun 2024 15:54:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Jun 2024 15:54:30 +0200] rev 527
- Version 0.4.6a1. Added HLT equipment volume and deadspace settings. In EditProduct the target water selection is now sticky. Changed the water treatment tab. Added a row wich displays the salt adjustments. This can be selected between actual and target values. The treated water show can select between mash or sparge water. The total line will become the final water in the boil kettle. Database update function is expanded with the new settings. Added a popup message warning that the database is upgraded and user action is required for the equipment profiles.
- Sat, 01 Jun 2024 21:10:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Jun 2024 21:10:54 +0200] rev 526
- Added fields for target_water and auto upgrade the products table
- Sat, 01 Jun 2024 15:19:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Jun 2024 15:19:08 +0200] rev 525
- Allow enter first pH measurements from every mash step and not just the first one. All pH editors in the production module have 0.05 or 0.01 resolution in the edit steps.
- Thu, 25 Apr 2024 13:16:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Apr 2024 13:16:48 +0200] rev 524
- Version 0.4.5. Adjusted for newer generation thermferm controllers.
- Sun, 10 Mar 2024 11:03:39 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Mar 2024 11:03:39 +0100] rev 523
- Disable Monitor menu if websocket server is not available.
- Tue, 05 Mar 2024 10:39:36 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Mar 2024 10:39:36 +0100] rev 522
- Version 0.4.4
- Tue, 05 Mar 2024 10:25:15 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Mar 2024 10:25:15 +0100] rev 521
- Clear mash measurments when duplicating a product.
- Mon, 04 Mar 2024 19:51:57 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Mar 2024 19:51:57 +0100] rev 520
- Code cleanup
- Mon, 04 Mar 2024 19:48:59 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Mar 2024 19:48:59 +0100] rev 519
- Fix export recipe to new product crash
- Tue, 27 Feb 2024 17:32:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 27 Feb 2024 17:32:00 +0100] rev 518
- No carbonation beer selection before brewing the beer.
- Mon, 26 Feb 2024 16:05:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Feb 2024 16:05:53 +0100] rev 517
- Version 0.4.3. Fix add fermentables in products when packaging sugar was defined but no amount was yet set.
- Mon, 23 Oct 2023 15:55:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Oct 2023 15:55:34 +0200] rev 516
- Fix block hops display when dry-hop is done, and extract hop is done after packaging.
- Wed, 18 Oct 2023 16:00:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 18 Oct 2023 16:00:06 +0200] rev 515
- Added application icon
- Tue, 17 Oct 2023 09:17:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 17 Oct 2023 09:17:02 +0200] rev 514
- Version 0.4.2
- Mon, 16 Oct 2023 13:54:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Oct 2023 13:54:20 +0200] rev 513
- Updated Dutch translation for the new calibrate screen.
- Mon, 16 Oct 2023 13:25:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Oct 2023 13:25:58 +0200] rev 512
- Removed several development debug messages. Implemented delete and add data row.
- Mon, 16 Oct 2023 11:39:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Oct 2023 11:39:20 +0200] rev 511
- Added error checks on calibration data
- Sun, 15 Oct 2023 17:37:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Oct 2023 17:37:08 +0200] rev 510
- Changed xCal array to a QList. Added sort on angle. Added save data. Added quit/save dialog.
- Sun, 15 Oct 2023 13:30:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Oct 2023 13:30:24 +0200] rev 509
- Added MySQL query example in the source.
- Sat, 14 Oct 2023 18:50:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 18:50:47 +0200] rev 508
- Added polyfit files.
- Sat, 14 Oct 2023 17:18:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 17:18:52 +0200] rev 507
- Added the cell edit function.
- Sat, 14 Oct 2023 16:10:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 16:10:14 +0200] rev 506
- Added Simple polynomial fitting functions written by Henry M. Forson. Added a graph that displays the old and new iSpindel calibration curve. Implemented delete row from the data.
- Sat, 14 Oct 2023 11:23:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 11:23:24 +0200] rev 505
- Load and show current calibration data.
- Fri, 13 Oct 2023 15:36:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Oct 2023 15:36:15 +0200] rev 504
- Attempt 1
- Fri, 13 Oct 2023 14:47:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Oct 2023 14:47:21 +0200] rev 503
- Basic setup for iSpindel calibration.
- Thu, 12 Oct 2023 17:03:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 12 Oct 2023 17:03:50 +0200] rev 502
- Changes in de iSpindel detail screen. Added a calibrate button and display the last update date and time.
- Sun, 20 Aug 2023 11:40:51 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Aug 2023 11:40:51 +0200] rev 501
- New battery percentage formula for iSpindel in chart.
- Sun, 20 Aug 2023 11:08:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Aug 2023 11:08:05 +0200] rev 500
- New battery percentage formula for iSpindel.
- Sat, 19 Aug 2023 18:50:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Aug 2023 18:50:22 +0200] rev 499
- Changed iSpindel battery 100% level a bit lower.
- Sat, 19 Aug 2023 16:58:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Aug 2023 16:58:03 +0200] rev 498
- In fermentation plot draw the SG line with temperature compensation.
- Fri, 07 Jul 2023 20:17:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 07 Jul 2023 20:17:21 +0200] rev 497
- Updated ranges for the carbonation chart.
- Thu, 20 Apr 2023 17:23:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Apr 2023 17:23:44 +0200] rev 496
- Fixed recipe editor add yeast crash.
- Sun, 12 Feb 2023 15:05:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 12 Feb 2023 15:05:28 +0100] rev 495
- Version 0.4.1. Adjusted monitor nodes debug messages.
- Sun, 12 Feb 2023 13:58:36 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 12 Feb 2023 13:58:36 +0100] rev 494
- In monitor iSpindel: in the chart calculate the ranges, do't let the toolkit do that. Save the path for chart image download in the user settings. In the tooltip for the battery voltage line, also show the remaining battery capacity. In the monitor window show the battery capacity digit instead of allways 0. Updated the translations.
- Sat, 11 Feb 2023 15:48:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 11 Feb 2023 15:48:02 +0100] rev 493
- Monitor iSpindels: use global variables instead of repeated expensive MySQL calls. Use the yeast temperature ranges for the colors on the thermometer scale. Don't show SVG and ABV if the OG is not yet known. Turn statusfield red if offline. Extra mon_ispindles fields yeast_lo and yeast_hi. Need at least bmsd version 0.3.42. If a websocket message is received that cannot be parsed, show the whole received message.
- Fri, 10 Feb 2023 17:28:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 10 Feb 2023 17:28:46 +0100] rev 492
- ChartCarbonate saves the image path in the settings file. Conditional debug messages in a lot on monitor files. In Fermenter monitor details make the status background red if offline. A lot more generic variables instead of continuous expensive calls to MySQL. If fermenter values for the thermometers are not OK, then do not show anything.
- Fri, 10 Feb 2023 14:06:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 10 Feb 2023 14:06:47 +0100] rev 491
- Monitor CO2 meters: better display and hide of values and widgets. Minor adjustments of the window layout. When offline, the status background will be red.
- Fri, 10 Feb 2023 10:09:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 10 Feb 2023 10:09:37 +0100] rev 490
- Fermenter charts, only draw lines that are really used. Better auto scaling, not using the internal version. If only a air line is to be shown, make it fat. Save the path to download the image in the settings file.
- Thu, 09 Feb 2023 12:53:21 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 Feb 2023 12:53:21 +0100] rev 489
- Fixed error messages about log and camera buttons. Only show items that are really used.
- Mon, 06 Feb 2023 11:55:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 06 Feb 2023 11:55:53 +0100] rev 488
- Checked after boil efficiency, it's correct.
- Sat, 04 Feb 2023 10:23:26 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 Feb 2023 10:23:26 +0100] rev 487
- Clean debug log settings after last changes.
- Fri, 03 Feb 2023 11:59:17 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 Feb 2023 11:59:17 +0100] rev 486
- Use cells from yeastpack if set to calculate the initcells. Use 90% underpitch to decide for a starter. Hide starter retry label and button if no starter is needed.
- Thu, 02 Feb 2023 17:14:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Feb 2023 17:14:28 +0100] rev 485
- Database upgrade will let the yeastpack cells at 0. Disabled some debug messages needed for development. Updated yeastpack editor tooltips.
- Thu, 02 Feb 2023 15:50:15 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Feb 2023 15:50:15 +0100] rev 484
- Set yeastpack dropdown on yeast edit row start.
- Thu, 02 Feb 2023 15:23:18 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Feb 2023 15:23:18 +0100] rev 483
- Added default load yeastpacks. Added yeast_package_changed signal.
- Tue, 31 Jan 2023 16:24:11 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 31 Jan 2023 16:24:11 +0100] rev 482
- Expanded Yeast edit popup with a Yeast Pack dropdown list. Prepared database product read and write with values for yeast package. They will be stored as json object in the yeast records.
- Tue, 31 Jan 2023 11:10:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 31 Jan 2023 11:10:14 +0100] rev 481
- Added valid flag to the inventory_yeastpack table. Initial false and after record edit set to true. This should prevent the use possible wrong values.
- Mon, 30 Jan 2023 17:05:13 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 30 Jan 2023 17:05:13 +0100] rev 480
- Added yeastpack editor. Expanded the database upgrade. On startup, recount the yeastpack used fields.
- Sun, 29 Jan 2023 14:40:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 29 Jan 2023 14:40:43 +0100] rev 479
- Version 0.4.0. Added database upgrade procedure on startup. Make sure inventory_yeastpack database is created and has default entries. This will become a table with data for different yeast packs.
- Sat, 28 Jan 2023 10:36:59 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 28 Jan 2023 10:36:59 +0100] rev 478
- Add dry primary yeasts weights to get a mixed total. Use the parameters from the first and mmost used yeast. Changed in products and recipes. Recalculated WLP purepitch viability and planned next generation purepitch. We need a better way to set these parameters like a packages table. Fixed several yeast edit values due to adding a STA1 column. Removed several unneeded refresh_all() calls as they screwed the sorting of the yeasts during edit. Added STA1 display to recipes. Changed products database starter_viability from integer to float.
- Wed, 25 Jan 2023 16:17:07 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jan 2023 16:17:07 +0100] rev 477
- Version 0.3.6. Updated translations and bumped version.
- Wed, 25 Jan 2023 16:12:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jan 2023 16:12:16 +0100] rev 476
- Fixed replace a yeast field offsets.
- Wed, 25 Jan 2023 13:11:51 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jan 2023 13:11:51 +0100] rev 475
- Some extra debug info en some removed for the product images. Clear picmap area if no pixmaps are left. Block pictype_changed and piccomment_changed if there are no pictures, prevents segfault.
- Tue, 24 Jan 2023 16:08:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 24 Jan 2023 16:08:16 +0100] rev 474
- Only try to save images on existing paths
- Tue, 24 Jan 2023 15:57:13 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 24 Jan 2023 15:57:13 +0100] rev 473
- Delete images from a producti first[C when a product is deleted.
- Mon, 23 Jan 2023 17:23:10 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jan 2023 17:23:10 +0100] rev 472
- If a new image for a product is loaded, check if the path is available. If not, use the home directory.
- Sun, 22 Jan 2023 19:02:54 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 22 Jan 2023 19:02:54 +0100] rev 471
- Implemented file save
- Sat, 21 Jan 2023 16:19:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 21 Jan 2023 16:19:47 +0100] rev 470
- Version 0.3.5
- Sat, 21 Jan 2023 16:18:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 21 Jan 2023 16:18:37 +0100] rev 469
- Some final changes for now.
- Sat, 21 Jan 2023 14:27:10 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 21 Jan 2023 14:27:10 +0100] rev 468
- The images tab now looks complete. Made the left side (thumbnails) a bit smaller. The right side of the screen now shows the current image and all data that belongs to that. After a new image is added, reload the images. Implemented delete image.
- Fri, 20 Jan 2023 16:44:08 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Jan 2023 16:44:08 +0100] rev 467
- Added more buttons to the images tab. Load images from the database and display thumbnails added. Added support for jpeg files. Rename pictures in the database to .png. Added temporary images_list, images_count and images_current variables to the product record.
- Wed, 18 Jan 2023 17:08:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 18 Jan 2023 17:08:25 +0100] rev 466
- Added fields for filename and timestamp.
- Wed, 18 Jan 2023 16:17:31 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 18 Jan 2023 16:17:31 +0100] rev 465
- In EditProduct added tab number 13. When entered, a signal is generated to init this tab so that we can defer loading. Added a AddImage button, we can select an image, give it a type and comment and store it is a separate table. The global settings file now has storage for paths (images, download and beerxml).
- Mon, 16 Jan 2023 16:55:41 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Jan 2023 16:55:41 +0100] rev 464
- Show 0 if afterboil volume is invalid instead of the chiller volume. Added product tab 13. Here the images (beerlabels, brew pictures) for a product will be shown. Resized all product tabs. Added STA1 tickmark in the yeasts table.
- Sun, 15 Jan 2023 14:33:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Jan 2023 14:33:53 +0100] rev 463
- Version 0.3.4
- Sun, 15 Jan 2023 14:15:49 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Jan 2023 14:15:49 +0100] rev 462
- Removed the last bits of equipent calc_volume setting. Changed to the equipment setup screen using suffixes in the fields. Updated the translations.
- Sun, 15 Jan 2023 12:35:04 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Jan 2023 12:35:04 +0100] rev 461
- On the brewday tab, show the afterboil volume inclusive the volume of the immersion chiller in the wort. Added refractometer buttons on the brewday tab. The brew volume cm edit popup shows a message if a immersion chiller is in the wort.
- Sat, 14 Jan 2023 15:38:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Jan 2023 15:38:28 +0100] rev 460
- Added a refractometer icon
- Sat, 14 Jan 2023 14:14:59 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Jan 2023 14:14:59 +0100] rev 459
- In print checklist show volume after boil inclusive immersion chiller volume. Improved some prompts in equipment edit.
- Sat, 14 Jan 2023 11:34:51 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Jan 2023 11:34:51 +0100] rev 458
- Renamed trub_chiller_loss fields to trub_loss
- Fri, 13 Jan 2023 15:08:57 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Jan 2023 15:08:57 +0100] rev 457
- Changed pitchrate field for liquid yeasts to read/write. Added pitchrate select using a QComboBox and added a popup window for that.
- Fri, 13 Jan 2023 12:00:58 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Jan 2023 12:00:58 +0100] rev 456
- Added a button to automatic recreate the yeast starter steps. Some code cleanup
- Thu, 12 Jan 2023 16:56:34 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 12 Jan 2023 16:56:34 +0100] rev 455
- Fixed dangling old starter data. Added conditional yeast debug logging.
- Thu, 12 Jan 2023 14:34:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 12 Jan 2023 14:34:14 +0100] rev 454
- Version 0.3.3. Removed several obsolete debug messages. IBU and Fermentation calculation debug messages are now controlled by conditional defines in global.h. In the brewday tab update the preboil and afterboil reference volumes. In the brewday tab the chiller type is a read only field directy linked to the selected equipment.
- Tue, 10 Jan 2023 16:56:21 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 10 Jan 2023 16:56:21 +0100] rev 453
- Calculate mash attenuation time using log base 5 instead of a linear function.
- Mon, 09 Jan 2023 17:03:19 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 09 Jan 2023 17:03:19 +0100] rev 452
- Limit mash steptime to 240 minutes. Limit mash steps to 82 degrees celsius. In estimate_fg limit total mash time to 240 minutes and increased the water/grain ration from 5.5 to 6 l/kg.
- Mon, 09 Jan 2023 15:35:04 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 09 Jan 2023 15:35:04 +0100] rev 451
- Backported mash calculation from EditProduct to EditRecipe.
- Mon, 09 Jan 2023 15:03:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 09 Jan 2023 15:03:55 +0100] rev 450
- In estimate_fg decrease attenuation for mash temperatures below 66.11 degrees.
- Sun, 08 Jan 2023 15:53:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Jan 2023 15:53:16 +0100] rev 449
- With estimate_fg added a boolean parameter sta1 to correct the outcome if a primary yeast with sta1 gen is used. Fixed a spelling error in EditProduct yeast tab for dry yeast.
- Sat, 03 Dec 2022 16:32:24 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 03 Dec 2022 16:32:24 +0100] rev 448
- Make sure the package abv is final when the tertiary fermentation data is filled in.
- Sun, 27 Nov 2022 15:14:21 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Nov 2022 15:14:21 +0100] rev 447
- Added show package color and ibu and take dillution in account
- Sat, 26 Nov 2022 15:41:11 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Nov 2022 15:41:11 +0100] rev 446
- Brewing salts can now set in hundreds instead on tents decimals.
- Sat, 26 Nov 2022 15:11:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Nov 2022 15:11:46 +0100] rev 445
- Reset mash measurement fields when a recipe is copied to a product.
- Sat, 19 Nov 2022 13:55:12 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Nov 2022 13:55:12 +0100] rev 444
- Toon ook de gewenste en verwachte hergisting druk.
- Fri, 18 Nov 2022 16:57:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Nov 2022 16:57:02 +0100] rev 443
- Details CO2 monitor shows the style limits for the specific beer. Adjust the scale of the pressure widget to the beer limits. Moved more functions to the global Utils. Fix expected pressure in the package screen for other priming sugars. Disabled some debug log messages.
- Fri, 18 Nov 2022 12:17:32 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Nov 2022 12:17:32 +0100] rev 442
- Moved GetPressureBar function to the Utils.
- Thu, 17 Nov 2022 17:26:08 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Nov 2022 17:26:08 +0100] rev 441
- Version 0.3.2
- Thu, 17 Nov 2022 17:23:54 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Nov 2022 17:23:54 +0100] rev 440
- Implemented IBU calculation for chilling.
- Wed, 16 Nov 2022 17:26:27 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 16 Nov 2022 17:26:27 +0100] rev 439
- Finally found the right way to calculate the bottle pressure in bar after refermentation.
- Tue, 15 Nov 2022 09:42:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Nov 2022 09:42:25 +0100] rev 438
- Small changes to the iSpindel graph. Translated the dutch product edit window title.
- Mon, 14 Nov 2022 16:05:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 14 Nov 2022 16:05:02 +0100] rev 437
- Disable manipulating mash steps when brewday is over.
- Mon, 14 Nov 2022 15:34:11 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 14 Nov 2022 15:34:11 +0100] rev 436
- Show product code and name in edit product window title if not a new product.
- Mon, 14 Nov 2022 15:23:51 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 14 Nov 2022 15:23:51 +0100] rev 435
- block_misc updated for MISC_USES_SPARGE
- Fri, 11 Nov 2022 15:04:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 11 Nov 2022 15:04:23 +0100] rev 434
- Charts downsize the pen from 3 to 2. Some nicer looking graphs.
- Mon, 07 Nov 2022 15:02:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 07 Nov 2022 15:02:16 +0100] rev 433
- Forgot to save the new eq_chiller_* fields in products.
- Fri, 04 Nov 2022 20:14:22 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Nov 2022 20:14:22 +0100] rev 432
- Removed several debug logmessages in tab 3 and database load.
- Fri, 04 Nov 2022 15:56:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Nov 2022 15:56:14 +0100] rev 431
- Use hop absorption factors from the global setup.
- Fri, 04 Nov 2022 14:17:56 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Nov 2022 14:17:56 +0100] rev 430
- Added five hop absorption fields to the profile_setup record to set the hop absorption rates. Added edit fields in the global setup. Load global these new variables during application startup.
- Sun, 30 Oct 2022 16:43:22 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 30 Oct 2022 16:43:22 +0100] rev 429
- In the product equipment tab show the volume to the fermenter. Changed some prompts and suffixes in that tab. Updated translations.
- Sat, 29 Oct 2022 15:50:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 29 Oct 2022 15:50:52 +0200] rev 428
- Restored translations again
- Sat, 29 Oct 2022 15:43:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 29 Oct 2022 15:43:28 +0200] rev 427
- Fix false adjust_to_total_100 setting in priming fermentables.
- Fri, 28 Oct 2022 16:37:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 28 Oct 2022 16:37:49 +0200] rev 426
- Added, tested and removed build in help. The Qt help system is not my thing, I think doxygen will be better.
- Wed, 26 Oct 2022 15:46:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 26 Oct 2022 15:46:10 +0200] rev 425
- Always update translations during make.
- Mon, 24 Oct 2022 20:01:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Oct 2022 20:01:43 +0200] rev 424
- Finished dutch transltions
- Mon, 24 Oct 2022 19:59:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Oct 2022 19:59:08 +0200] rev 423
- Adjusted chiller_loss default value to 0.4. Disabled product fields eq_calc_boil_volume, eq_hop_utilization, eq_lauter_volume and eq_lauter_height. Added eq_chiller_type, eq_chiller_to79, eq_chiller_volume, eq_chiller_lpm, eq_chiller_loss with default values for immersion chilling. Load these values from new selected equipment. Changed edit product tab 2 to show new the new fields and removed the obsolete fields.
- Mon, 24 Oct 2022 16:06:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Oct 2022 16:06:14 +0200] rev 422
- Try to prevent zapping translations
- Mon, 24 Oct 2022 15:57:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Oct 2022 15:57:18 +0200] rev 421
- Updated dutch translation
- Mon, 24 Oct 2022 15:40:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Oct 2022 15:40:16 +0200] rev 420
- Restored translations
- Mon, 24 Oct 2022 15:25:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Oct 2022 15:25:50 +0200] rev 419
- The equipment editor uses named fields for database io. Edit field 'trub chiller loss' is now called 'trub loss', but will be renamed again. Removed editing hop_utilization, lauter_volume and lauter_height. These fields were never used in the application. Not yet removed from the database. Added chiller_type, chiller_to79, chiller_volume, chiller_lpm and chiller_loss fields so that we can tie a chiller to the equipment setup. Renamed some chiller names.
- Fri, 21 Oct 2022 17:01:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 21 Oct 2022 17:01:20 +0200] rev 418
- Version 0.3.0
- Fri, 21 Oct 2022 16:59:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 21 Oct 2022 16:59:31 +0200] rev 417
- Updated translations.
- Fri, 21 Oct 2022 16:50:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 21 Oct 2022 16:50:50 +0200] rev 416
- Handle choose beer if it needs to be cleared better in details iSpindels and CO2meters.
- Fri, 21 Oct 2022 16:36:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 21 Oct 2022 16:36:40 +0200] rev 415
- Handle choose beer if it needs to be cleared better. Fixed unit offline view
- Fri, 21 Oct 2022 15:49:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 21 Oct 2022 15:49:10 +0200] rev 414
- With edited fermentation profile make sure the steps values are handled as string and double/integer values when loaded in a fermenter.
- Mon, 10 Oct 2022 12:55:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 10 Oct 2022 12:55:05 +0200] rev 413
- Version 0.2.28. Use calculated hop absorption during boil to correct the volume to the fermenter.
- Sun, 09 Oct 2022 15:26:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Oct 2022 15:26:42 +0200] rev 412
- Calculate and show the hop absorption losses in the boil kettle and fermenter.
- Sun, 09 Oct 2022 13:17:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Oct 2022 13:17:23 +0200] rev 411
- Fixed spelling error
- Sat, 08 Oct 2022 16:02:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Oct 2022 16:02:25 +0200] rev 410
- Version 0.2.27
- Sat, 08 Oct 2022 14:53:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Oct 2022 14:53:31 +0200] rev 409
- The same calculation for boil_size in a new product.
- Sat, 08 Oct 2022 14:45:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Oct 2022 14:45:29 +0200] rev 408
- The same calculation for boil_size in a new recipe.
- Sat, 08 Oct 2022 14:33:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Oct 2022 14:33:36 +0200] rev 407
- Boil size in recipe edit and product edit is always read-only. In product edit use the evaporation rate from the equipment to calculate the boil size.
- Sat, 08 Oct 2022 10:26:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Oct 2022 10:26:31 +0200] rev 406
- Fixed translation error.
- Thu, 22 Sep 2022 11:33:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 22 Sep 2022 11:33:45 +0200] rev 405
- Fix checklist mash steps overflow.
- Sat, 27 Aug 2022 13:54:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Aug 2022 13:54:01 +0200] rev 404
- Fixed negative bottle of keg volumes and overflow totals.
- Sat, 20 Aug 2022 19:35:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 20 Aug 2022 19:35:21 +0200] rev 403
- Update tab packaging if beerstyle is changed.
- Fri, 19 Aug 2022 17:16:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 19 Aug 2022 17:16:55 +0200] rev 402
- Updated export to forum with updated and final values. Added BU:RE ratio.
- Thu, 18 Aug 2022 20:34:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Aug 2022 20:34:15 +0200] rev 401
- Init est_carb field for new products.
- Thu, 18 Aug 2022 20:02:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Aug 2022 20:02:41 +0200] rev 400
- Version 0.2.26
- Thu, 18 Aug 2022 19:47:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Aug 2022 19:47:28 +0200] rev 399
- Prompts corrections and updated translations. Minor layout changes so the prompts will fit.
- Thu, 18 Aug 2022 17:07:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Aug 2022 17:07:47 +0200] rev 398
- After brewing show final IBU on the first tab.
- Thu, 18 Aug 2022 16:11:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Aug 2022 16:11:20 +0200] rev 397
- Edit Product, split CO2 package pressure in bottles and kegs. BU:RE code cleanup. calcPack() sets the CO2 values on the first tab. Show final EBC on tab 1 if the stage is after brew. Show final ABV and energy on tab 1 if fermentation is done. Removed wrong bottle priming calculation from calcFermentables() because calcPack() does this.
- Wed, 17 Aug 2022 15:23:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 17 Aug 2022 15:23:17 +0200] rev 396
- Show final OG and FG if they are valid on the first tab.
- Wed, 17 Aug 2022 14:30:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 17 Aug 2022 14:30:33 +0200] rev 395
- Added Bitterness Unit to Real Extract unit calculation and display. In product use final values if possible for the BU:GU and BU:RE calculations depending on the product stage.
- Thu, 11 Aug 2022 10:50:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 11 Aug 2022 10:50:18 +0200] rev 394
- Clear log flags and starter volumes when a product is duplicated.
- Tue, 09 Aug 2022 15:15:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 09 Aug 2022 15:15:11 +0200] rev 393
- Version 0.2.25
- Tue, 09 Aug 2022 15:14:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 09 Aug 2022 15:14:11 +0200] rev 392
- Final changes for the webcam page.
- Tue, 09 Aug 2022 12:45:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 09 Aug 2022 12:45:49 +0200] rev 391
- Initial webcam interface for fermenter view
- Fri, 05 Aug 2022 20:13:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 05 Aug 2022 20:13:11 +0200] rev 390
- Fixed calculation of estimated fg.
- Wed, 03 Aug 2022 11:09:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Aug 2022 11:09:07 +0200] rev 389
- Add support for hop extract values with XML import
- Tue, 02 Aug 2022 20:19:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Aug 2022 20:19:55 +0200] rev 388
- Version 0.2.24
- Tue, 02 Aug 2022 20:18:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Aug 2022 20:18:05 +0200] rev 387
- Import brew logs added.
- Mon, 01 Aug 2022 21:49:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 01 Aug 2022 21:49:57 +0200] rev 386
- Added reports, total production, fermentations and efficiency.
- Mon, 01 Aug 2022 13:05:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 01 Aug 2022 13:05:23 +0200] rev 385
- All profile and inventory editors now log warnings if something went wrong. Also added a Clone button. Delete now asks for confirmation.
- Sun, 31 Jul 2022 20:23:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 31 Jul 2022 20:23:27 +0200] rev 384
- Product and recipe beerxml export support for hop extracts. Recipes with missing hop from the database use a default utilisation value.
- Sun, 31 Jul 2022 16:29:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 31 Jul 2022 16:29:05 +0200] rev 383
- A small correction on beerxml export.
- Sun, 31 Jul 2022 13:25:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 31 Jul 2022 13:25:32 +0200] rev 382
- With inventory hops beerxml export support hop extracts. Added private xml values to show the real values and hide these in the poort designed beerxml know values.
- Sat, 30 Jul 2022 19:21:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 30 Jul 2022 19:21:55 +0200] rev 381
- Version 0.2.23
- Sat, 30 Jul 2022 16:30:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 30 Jul 2022 16:30:02 +0200] rev 380
- Global setup added hop utilisation defaults, these are used by the hops editor. In the hops editor, changing the hop form sets the new default utilisation. Hide and show the time edit entry instead of setting it read-only. The new defaults are loaded at program startup. Changed the global setup for the new utilisation fields and dropped the obsolete factor fields. The toIBU formula doesn't use my_factor_* variables anymore, hop differences now come from the utilisation field per hop. The global database is updated to the new defaults.
- Fri, 29 Jul 2022 20:59:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 20:59:21 +0200] rev 379
- Print recipe and product, miscs weights have 2 decimals. Add hop extract during bottling to the checklist.
- Fri, 29 Jul 2022 20:15:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 20:15:40 +0200] rev 378
- Version 0.2.22
- Fri, 29 Jul 2022 17:12:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 17:12:02 +0200] rev 377
- Added hop clone
- Fri, 29 Jul 2022 16:45:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 16:45:11 +0200] rev 376
- Edit Recipe Hop now properly updates the utilisation and bu_factor fields.
- Fri, 29 Jul 2022 16:21:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 16:21:20 +0200] rev 375
- Final set the default utilisation to 20. Selecting another hop in a product now sets the new utilisation and bu_factor too. Removed experimental CO2 extract calculation and let it handle by the Tinseth formula. The Tinseth formula uses the Utilisation value in the final calculation. Moved the ISO extract formula for extract at bottling to the main toIBU function.
- Fri, 29 Jul 2022 13:20:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 13:20:24 +0200] rev 374
- Update recipe load/save for the new hops fields.
- Fri, 29 Jul 2022 13:12:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 29 Jul 2022 13:12:26 +0200] rev 373
- First load of changes for hops. In EditHop load the dropdown buttons from the global table. Use named query fields. Added database utilisation and bu_factor fields for hop extracts. Added edit fields for these new fields. Added post boil SG, utilisation and bu_factor parameters to the toIBU function. Added hops form parameter to the hopFlavourContribution and hopAromaContribution display bars. In the hops inventory list dispay volumes instead of weight for hop extracts. Modified the TinsethIBU function to use utilisation and bu_factor parameters. Add calculations for co2 and iso hop extracts, this is work in progress. The toIBU function makes use of the preSG and postSG values to use the correct SG to caall the TinsethIBU function. This results in a bit lower IBU values mostly affecting the late additions. Added use hop at bottling for iso hop extracts like Tetra hops using the formula from BarthHaas.
- Tue, 26 Jul 2022 19:46:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Jul 2022 19:46:44 +0200] rev 372
- Version 0.2.21. Updated translations.
- Tue, 26 Jul 2022 14:26:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Jul 2022 14:26:50 +0200] rev 371
- On the fermenter, iSpindel, carbonation and brewday chart a tooltip with values is shown wheren hovering over the most important data lines. Changed the vertical to horzontal screen layout and added a save button to save the graph as .png image.
- Tue, 26 Jul 2022 11:15:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Jul 2022 11:15:37 +0200] rev 370
- Added callout
- Thu, 21 Jul 2022 15:08:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 21 Jul 2022 15:08:27 +0200] rev 369
- Version 0.2.20. Calculate total linther ignore malt color because our database is correct.
- Wed, 20 Jul 2022 14:27:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Jul 2022 14:27:49 +0200] rev 368
- Version 0.2.19
- Wed, 20 Jul 2022 14:14:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Jul 2022 14:14:10 +0200] rev 367
- Added new sparge water data to the checklist.
- Wed, 20 Jul 2022 12:54:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Jul 2022 12:54:13 +0200] rev 366
- Added printing sparge water details.
- Wed, 20 Jul 2022 12:44:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Jul 2022 12:44:02 +0200] rev 365
- Added sparge water salt additions. Adjust sparge acid amount if manual calculations and the water volume is changed.
- Tue, 19 Jul 2022 16:00:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 19 Jul 2022 16:00:52 +0200] rev 364
- Initial setup to print sparge water.
- Tue, 19 Jul 2022 15:59:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 19 Jul 2022 15:59:50 +0200] rev 363
- Fixed overloaded perc_mashShow when the value is above the maxiumum.
- Tue, 19 Jul 2022 13:59:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 19 Jul 2022 13:59:31 +0200] rev 362
- Version 0.2.18
- Tue, 19 Jul 2022 11:17:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 19 Jul 2022 11:17:39 +0200] rev 361
- Improved selection logic for the sparge water.
- Mon, 18 Jul 2022 19:28:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Jul 2022 19:28:21 +0200] rev 360
- Updated translations
- Mon, 18 Jul 2022 17:04:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Jul 2022 17:04:02 +0200] rev 359
- Redesign of the water tabs in product and recipe editors. Prepare for sparge water salt additions. Acid additions are now automatic or manual for mash and sparge. Fixed error in acid calculation strength. Fixed phophoric SG value.
- Sun, 17 Jul 2022 22:18:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 17 Jul 2022 22:18:48 +0200] rev 358
- Adapted to new Utils functions. Used named versions for MySQL water read.
- Sun, 17 Jul 2022 22:16:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 17 Jul 2022 22:16:20 +0200] rev 357
- Corrected Phosphoric SG value.
- Sun, 17 Jul 2022 22:14:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 17 Jul 2022 22:14:41 +0200] rev 356
- Made the Hardness function more precise. Removed RA_ppm function, was doubles with ResidualAlkalinity. Added RA_CaCO3 and Bicarbonate functions.
- Sun, 17 Jul 2022 22:11:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 17 Jul 2022 22:11:30 +0200] rev 355
- Added misc_uses spage step. Corrected some defines mol values.
- Sat, 16 Jul 2022 16:40:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Jul 2022 16:40:07 +0200] rev 354
- Added tooltips
- Sat, 16 Jul 2022 15:06:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Jul 2022 15:06:40 +0200] rev 353
- Updated watersources editors to include water hardness and residual alkalinity. Layout changes. Only total_alkalinity edit, bicarbonate is now only calculated.
- Tue, 12 Jul 2022 16:01:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Jul 2022 16:01:49 +0200] rev 352
- Fixed some promps space. Updated translations.
- Tue, 12 Jul 2022 16:01:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Jul 2022 16:01:20 +0200] rev 351
- Fixed some promps space. Updated translations.
- Tue, 12 Jul 2022 15:34:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Jul 2022 15:34:17 +0200] rev 350
- Added calculation preboild pH in recipes. Added water hardness and residual alkalinity calculations in the water tab.
- Tue, 12 Jul 2022 12:10:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Jul 2022 12:10:20 +0200] rev 349
- Calculate and show estimated preboil pH
- Mon, 11 Jul 2022 17:03:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Jul 2022 17:03:55 +0200] rev 348
- Updated translations
- Mon, 11 Jul 2022 16:46:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Jul 2022 16:46:30 +0200] rev 347
- Only fermenters support control commands.
- Mon, 11 Jul 2022 15:57:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Jul 2022 15:57:06 +0200] rev 346
- Added nodes monitor detail screen.
- Sat, 09 Jul 2022 23:05:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Jul 2022 23:05:25 +0200] rev 345
- Increased some labels sizes.
- Fri, 08 Jul 2022 15:33:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 08 Jul 2022 15:33:27 +0200] rev 344
- Setting mash hopping efficiency now between -95 and +50. Refresh all after changing the IBU method. Added own part for Mash Hopping. Code cleanup.
- Fri, 08 Jul 2022 13:24:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 08 Jul 2022 13:24:45 +0200] rev 343
- Removed old experiment to calculate flameout and whirlpool ibu's. Changed Tinseth calculation to use a time window so you can select the ibu contribution during a specified time. Added ibu_method Tinset++. Added calculation extensions for Tinseth++, this calculates the flameout and whirlpool effects on all hops. During cooling is to be done.
- Thu, 07 Jul 2022 19:42:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Jul 2022 19:42:19 +0200] rev 342
- Code cleanup
- Thu, 07 Jul 2022 17:02:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Jul 2022 17:02:17 +0200] rev 341
- Cooling method dropdown table loads from a global table. Updated the translations.
- Thu, 07 Jul 2022 14:57:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Jul 2022 14:57:24 +0200] rev 340
- Added cooling parameters to the toIBU function.
- Thu, 07 Jul 2022 14:17:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Jul 2022 14:17:53 +0200] rev 339
- Removed Garetz and Rager IBU calculations, we will only use Tinseth
- Thu, 07 Jul 2022 09:54:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Jul 2022 09:54:42 +0200] rev 338
- With beerXML recipe import, the IBU method is always Tinseth.
- Thu, 07 Jul 2022 08:51:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Jul 2022 08:51:57 +0200] rev 337
- Added my_height global variable and edit in profile setup. This sets the height of the brewery above or below sealevel. Added calculations for the air pressure, boilpoint and IBU_reduction that all depend on the height. Currently not yet in use. Split out the real IBU calculation from the generic toIBU function. This has no effect on the results.
- Tue, 05 Jul 2022 14:31:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Jul 2022 14:31:39 +0200] rev 336
- IBU method names are now global.
- Sun, 03 Jul 2022 19:02:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 03 Jul 2022 19:02:02 +0200] rev 335
- The carbonation chart has fixed Y ranges.
- Sun, 03 Jul 2022 14:41:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 03 Jul 2022 14:41:30 +0200] rev 334
- Version 0.2.15 with updated translations.
- Sun, 03 Jul 2022 14:30:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 03 Jul 2022 14:30:49 +0200] rev 333
- Moved Fermenter and iSpindel charts to their own functions. Added these to DetailFermenter and DetailiSpindel too.
- Sun, 03 Jul 2022 13:12:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 03 Jul 2022 13:12:22 +0200] rev 332
- Added carbonation chart to it's own function. Added this chart to DetailCO2meter too.
- Sat, 02 Jul 2022 15:45:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 02 Jul 2022 15:45:01 +0200] rev 331
- Version 0.2.14
- Sat, 02 Jul 2022 15:42:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 02 Jul 2022 15:42:56 +0200] rev 330
- Updated translations.
- Sat, 02 Jul 2022 15:24:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 02 Jul 2022 15:24:31 +0200] rev 329
- Added iSpindel detail screen
- Sat, 02 Jul 2022 11:23:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 02 Jul 2022 11:23:13 +0200] rev 328
- Added CO2 meter monitor detail screen.
- Fri, 01 Jul 2022 22:57:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Jul 2022 22:57:31 +0200] rev 327
- Updated translations
- Fri, 01 Jul 2022 21:50:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Jul 2022 21:50:21 +0200] rev 326
- Extra decimal digit for the pressure.
- Fri, 01 Jul 2022 21:22:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Jul 2022 21:22:46 +0200] rev 325
- Workaround for the thermometer scale ranges. Added chiller thermometer settings. Added beer select.
- Fri, 01 Jul 2022 19:52:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Jul 2022 19:52:11 +0200] rev 324
- Implemented profile control. Added stage edit. Added manual control. Added temperature setting.
- Thu, 30 Jun 2022 21:05:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 30 Jun 2022 21:05:30 +0200] rev 323
- Started with change and signal functions. Implemented mode change for test. The MainWindow webSocket is now global so the Detail screens can send websocket messages.
- Thu, 30 Jun 2022 21:01:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 30 Jun 2022 21:01:50 +0200] rev 322
- More Polish to English translations
- Thu, 30 Jun 2022 14:44:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 30 Jun 2022 14:44:46 +0200] rev 321
- Force red or black pen color
- Thu, 30 Jun 2022 11:48:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 30 Jun 2022 11:48:47 +0200] rev 320
- Changed the 'off' color effect of the led
- Thu, 30 Jun 2022 10:38:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 30 Jun 2022 10:38:03 +0200] rev 319
- Translated to English.
- Wed, 29 Jun 2022 23:06:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Jun 2022 23:06:38 +0200] rev 318
- Removed LED plugin, now using the one from the AnalogWidgets.
- Wed, 29 Jun 2022 22:19:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Jun 2022 22:19:39 +0200] rev 317
- Added DetailFermenter screen
- Wed, 29 Jun 2022 21:28:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Jun 2022 21:28:13 +0200] rev 316
- Added led, manometer, thermometer and wallclock from the abandoned AnalogWidgets project as plugins. There is some work to do but it's already usable for the monitor screens.
- Wed, 29 Jun 2022 08:44:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Jun 2022 08:44:57 +0200] rev 315
- Prepare for DetailFermenter
- Tue, 28 Jun 2022 20:12:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 28 Jun 2022 20:12:16 +0200] rev 314
- Added LED plugin.
- Tue, 28 Jun 2022 15:33:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 28 Jun 2022 15:33:52 +0200] rev 313
- Added monitor co2meters overview
- Tue, 28 Jun 2022 14:48:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 28 Jun 2022 14:48:38 +0200] rev 312
- Added monitor fermenters overview
- Tue, 28 Jun 2022 13:26:51 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 28 Jun 2022 13:26:51 +0200] rev 311
- Respond to websocket ping. Added iSpindels monitor overview.
- Mon, 27 Jun 2022 21:12:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 27 Jun 2022 21:12:19 +0200] rev 310
- Added monitor nodes overview
- Mon, 27 Jun 2022 11:50:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 27 Jun 2022 11:50:18 +0200] rev 309
- Using names for profile_setup query
- Fri, 24 Jun 2022 16:50:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 24 Jun 2022 16:50:22 +0200] rev 308
- Add database maintenance to the startup code. Start some work ok parsing websocket messages.
- Fri, 24 Jun 2022 11:07:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 24 Jun 2022 11:07:34 +0200] rev 307
- Log product code and name instead of record number. Added water supply check.
- Thu, 23 Jun 2022 16:56:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 23 Jun 2022 16:56:07 +0200] rev 306
- Version 0.2.13. Updated translations
- Thu, 23 Jun 2022 16:50:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 23 Jun 2022 16:50:23 +0200] rev 305
- Added reduce inventory for all process stages. Added block fermentable to block buttons and inventory when the fermentable has been reduced. Added block hop to block buttons and inventory when the fermentable has been reduced. Added block misc to block buttons and inventory when the fermentable has been reduced. Added block yeast to block buttons and inventory when the fermentable has been reduced.
- Tue, 21 Jun 2022 16:16:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 21 Jun 2022 16:16:43 +0200] rev 304
- Added remarks about beerxml design flaws.
- Tue, 21 Jun 2022 09:26:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 21 Jun 2022 09:26:25 +0200] rev 303
- Version 0.2.12
- Tue, 21 Jun 2022 09:08:59 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 21 Jun 2022 09:08:59 +0200] rev 302
- Export recipe or product to beerxml use the global untranslated arrays. Export recipe or product to forum use the global translated arrays.
- Mon, 20 Jun 2022 19:55:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 20 Jun 2022 19:55:23 +0200] rev 301
- Finally the translation of string arrays is working.
- Sun, 19 Jun 2022 19:42:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 19 Jun 2022 19:42:29 +0200] rev 300
- Added hop co2 extract form. Added hop add at bottling needed for iso and tetra hop.
- Sun, 19 Jun 2022 13:34:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 19 Jun 2022 13:34:18 +0200] rev 299
- Fixed select yeasts in recipes and poducts.
- Sun, 19 Jun 2022 11:56:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 19 Jun 2022 11:56:02 +0200] rev 298
- Update translations