changelog
- Fri, 14 Jun 2024 08:45:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 14 Jun 2024 08:45:35 +0200] rev 536
- Version 0.5.0. Startup with the first tab active.
- Tue, 11 Jun 2024 17:52:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Jun 2024 17:52:12 +0200] rev 535
- In the checklist add pH check during the boil.
- Tue, 11 Jun 2024 16:47:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Jun 2024 16:47:11 +0200] rev 534
- Set correct background colours and pH tresholds for the final water and sparge water.
- Tue, 11 Jun 2024 15:51:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Jun 2024 15:51:17 +0200] rev 533
- Version 0.6.b2. In export to forum show the final treated water. Complete water recalculate if sparge water acid or ph is changed. Added and changed pH tooltips on the water tab. Added a line with total treated water to the product print.
- Sun, 09 Jun 2024 17:00:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 17:00:00 +0200] rev 532
- Don't update sparge volume when brew is done. Disabled some debug messages.
- Sun, 09 Jun 2024 16:12:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 16:12:09 +0200] rev 531
- Vertaling bijgewerkt. Minimale watertab layout aanpassing.
- Sun, 09 Jun 2024 15:20:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 15:20:26 +0200] rev 530
- Version 0.4.6b1 Update product with calculated sparge supply. This value is now only calculated from the desired sparge estimate plus HLT deadspace. Fixed brewing salts for sparge read-only after brewday. The final water displays the mixed mash and sparge water profile, almost the same as what goes into the boil kettle. The Cl/SO4 ratio display now works on the final water.
- Sun, 09 Jun 2024 11:47:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 09 Jun 2024 11:47:41 +0200] rev 529
- Some code cleanup. Upgrade HLT settings during product load if the default settings are detected.
- Sat, 08 Jun 2024 16:58:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Jun 2024 16:58:52 +0200] rev 528
- Update total water volume.
- Sat, 08 Jun 2024 15:54:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 08 Jun 2024 15:54:30 +0200] rev 527
- Version 0.4.6a1. Added HLT equipment volume and deadspace settings. In EditProduct the target water selection is now sticky. Changed the water treatment tab. Added a row wich displays the salt adjustments. This can be selected between actual and target values. The treated water show can select between mash or sparge water. The total line will become the final water in the boil kettle. Database update function is expanded with the new settings. Added a popup message warning that the database is upgraded and user action is required for the equipment profiles.
- Sat, 01 Jun 2024 21:10:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Jun 2024 21:10:54 +0200] rev 526
- Added fields for target_water and auto upgrade the products table
- Sat, 01 Jun 2024 15:19:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Jun 2024 15:19:08 +0200] rev 525
- Allow enter first pH measurements from every mash step and not just the first one. All pH editors in the production module have 0.05 or 0.01 resolution in the edit steps.
- Thu, 25 Apr 2024 13:16:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Apr 2024 13:16:48 +0200] rev 524
- Version 0.4.5. Adjusted for newer generation thermferm controllers.
- Sun, 10 Mar 2024 11:03:39 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Mar 2024 11:03:39 +0100] rev 523
- Disable Monitor menu if websocket server is not available.
- Tue, 05 Mar 2024 10:39:36 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Mar 2024 10:39:36 +0100] rev 522
- Version 0.4.4
- Tue, 05 Mar 2024 10:25:15 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Mar 2024 10:25:15 +0100] rev 521
- Clear mash measurments when duplicating a product.
- Mon, 04 Mar 2024 19:51:57 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Mar 2024 19:51:57 +0100] rev 520
- Code cleanup
- Mon, 04 Mar 2024 19:48:59 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Mar 2024 19:48:59 +0100] rev 519
- Fix export recipe to new product crash
- Tue, 27 Feb 2024 17:32:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 27 Feb 2024 17:32:00 +0100] rev 518
- No carbonation beer selection before brewing the beer.
- Mon, 26 Feb 2024 16:05:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Feb 2024 16:05:53 +0100] rev 517
- Version 0.4.3. Fix add fermentables in products when packaging sugar was defined but no amount was yet set.
- Mon, 23 Oct 2023 15:55:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Oct 2023 15:55:34 +0200] rev 516
- Fix block hops display when dry-hop is done, and extract hop is done after packaging.
- Wed, 18 Oct 2023 16:00:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 18 Oct 2023 16:00:06 +0200] rev 515
- Added application icon
- Tue, 17 Oct 2023 09:17:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 17 Oct 2023 09:17:02 +0200] rev 514
- Version 0.4.2
- Mon, 16 Oct 2023 13:54:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Oct 2023 13:54:20 +0200] rev 513
- Updated Dutch translation for the new calibrate screen.
- Mon, 16 Oct 2023 13:25:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Oct 2023 13:25:58 +0200] rev 512
- Removed several development debug messages. Implemented delete and add data row.
- Mon, 16 Oct 2023 11:39:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Oct 2023 11:39:20 +0200] rev 511
- Added error checks on calibration data
- Sun, 15 Oct 2023 17:37:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Oct 2023 17:37:08 +0200] rev 510
- Changed xCal array to a QList. Added sort on angle. Added save data. Added quit/save dialog.
- Sun, 15 Oct 2023 13:30:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Oct 2023 13:30:24 +0200] rev 509
- Added MySQL query example in the source.
- Sat, 14 Oct 2023 18:50:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 18:50:47 +0200] rev 508
- Added polyfit files.
- Sat, 14 Oct 2023 17:18:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 17:18:52 +0200] rev 507
- Added the cell edit function.
- Sat, 14 Oct 2023 16:10:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 16:10:14 +0200] rev 506
- Added Simple polynomial fitting functions written by Henry M. Forson. Added a graph that displays the old and new iSpindel calibration curve. Implemented delete row from the data.
- Sat, 14 Oct 2023 11:23:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Oct 2023 11:23:24 +0200] rev 505
- Load and show current calibration data.
- Fri, 13 Oct 2023 15:36:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Oct 2023 15:36:15 +0200] rev 504
- Attempt 1
- Fri, 13 Oct 2023 14:47:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Oct 2023 14:47:21 +0200] rev 503
- Basic setup for iSpindel calibration.
- Thu, 12 Oct 2023 17:03:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 12 Oct 2023 17:03:50 +0200] rev 502
- Changes in de iSpindel detail screen. Added a calibrate button and display the last update date and time.
- Sun, 20 Aug 2023 11:40:51 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Aug 2023 11:40:51 +0200] rev 501
- New battery percentage formula for iSpindel in chart.
- Sun, 20 Aug 2023 11:08:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Aug 2023 11:08:05 +0200] rev 500
- New battery percentage formula for iSpindel.
- Sat, 19 Aug 2023 18:50:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Aug 2023 18:50:22 +0200] rev 499
- Changed iSpindel battery 100% level a bit lower.
- Sat, 19 Aug 2023 16:58:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Aug 2023 16:58:03 +0200] rev 498
- In fermentation plot draw the SG line with temperature compensation.
- Fri, 07 Jul 2023 20:17:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 07 Jul 2023 20:17:21 +0200] rev 497
- Updated ranges for the carbonation chart.
- Thu, 20 Apr 2023 17:23:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Apr 2023 17:23:44 +0200] rev 496
- Fixed recipe editor add yeast crash.
- Sun, 12 Feb 2023 15:05:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 12 Feb 2023 15:05:28 +0100] rev 495
- Version 0.4.1. Adjusted monitor nodes debug messages.
- Sun, 12 Feb 2023 13:58:36 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 12 Feb 2023 13:58:36 +0100] rev 494
- In monitor iSpindel: in the chart calculate the ranges, do't let the toolkit do that. Save the path for chart image download in the user settings. In the tooltip for the battery voltage line, also show the remaining battery capacity. In the monitor window show the battery capacity digit instead of allways 0. Updated the translations.
- Sat, 11 Feb 2023 15:48:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 11 Feb 2023 15:48:02 +0100] rev 493
- Monitor iSpindels: use global variables instead of repeated expensive MySQL calls. Use the yeast temperature ranges for the colors on the thermometer scale. Don't show SVG and ABV if the OG is not yet known. Turn statusfield red if offline. Extra mon_ispindles fields yeast_lo and yeast_hi. Need at least bmsd version 0.3.42. If a websocket message is received that cannot be parsed, show the whole received message.
- Fri, 10 Feb 2023 17:28:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 10 Feb 2023 17:28:46 +0100] rev 492
- ChartCarbonate saves the image path in the settings file. Conditional debug messages in a lot on monitor files. In Fermenter monitor details make the status background red if offline. A lot more generic variables instead of continuous expensive calls to MySQL. If fermenter values for the thermometers are not OK, then do not show anything.
- Fri, 10 Feb 2023 14:06:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 10 Feb 2023 14:06:47 +0100] rev 491
- Monitor CO2 meters: better display and hide of values and widgets. Minor adjustments of the window layout. When offline, the status background will be red.
- Fri, 10 Feb 2023 10:09:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 10 Feb 2023 10:09:37 +0100] rev 490
- Fermenter charts, only draw lines that are really used. Better auto scaling, not using the internal version. If only a air line is to be shown, make it fat. Save the path to download the image in the settings file.
- Thu, 09 Feb 2023 12:53:21 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 Feb 2023 12:53:21 +0100] rev 489
- Fixed error messages about log and camera buttons. Only show items that are really used.
- Mon, 06 Feb 2023 11:55:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 06 Feb 2023 11:55:53 +0100] rev 488
- Checked after boil efficiency, it's correct.
- Sat, 04 Feb 2023 10:23:26 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 Feb 2023 10:23:26 +0100] rev 487
- Clean debug log settings after last changes.
- Fri, 03 Feb 2023 11:59:17 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 Feb 2023 11:59:17 +0100] rev 486
- Use cells from yeastpack if set to calculate the initcells. Use 90% underpitch to decide for a starter. Hide starter retry label and button if no starter is needed.
- Thu, 02 Feb 2023 17:14:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Feb 2023 17:14:28 +0100] rev 485
- Database upgrade will let the yeastpack cells at 0. Disabled some debug messages needed for development. Updated yeastpack editor tooltips.
- Thu, 02 Feb 2023 15:50:15 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Feb 2023 15:50:15 +0100] rev 484
- Set yeastpack dropdown on yeast edit row start.
- Thu, 02 Feb 2023 15:23:18 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Feb 2023 15:23:18 +0100] rev 483
- Added default load yeastpacks. Added yeast_package_changed signal.
- Tue, 31 Jan 2023 16:24:11 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 31 Jan 2023 16:24:11 +0100] rev 482
- Expanded Yeast edit popup with a Yeast Pack dropdown list. Prepared database product read and write with values for yeast package. They will be stored as json object in the yeast records.
- Tue, 31 Jan 2023 11:10:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 31 Jan 2023 11:10:14 +0100] rev 481
- Added valid flag to the inventory_yeastpack table. Initial false and after record edit set to true. This should prevent the use possible wrong values.
- Mon, 30 Jan 2023 17:05:13 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 30 Jan 2023 17:05:13 +0100] rev 480
- Added yeastpack editor. Expanded the database upgrade. On startup, recount the yeastpack used fields.
- Sun, 29 Jan 2023 14:40:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 29 Jan 2023 14:40:43 +0100] rev 479
- Version 0.4.0. Added database upgrade procedure on startup. Make sure inventory_yeastpack database is created and has default entries. This will become a table with data for different yeast packs.
- Sat, 28 Jan 2023 10:36:59 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 28 Jan 2023 10:36:59 +0100] rev 478
- Add dry primary yeasts weights to get a mixed total. Use the parameters from the first and mmost used yeast. Changed in products and recipes. Recalculated WLP purepitch viability and planned next generation purepitch. We need a better way to set these parameters like a packages table. Fixed several yeast edit values due to adding a STA1 column. Removed several unneeded refresh_all() calls as they screwed the sorting of the yeasts during edit. Added STA1 display to recipes. Changed products database starter_viability from integer to float.
- Wed, 25 Jan 2023 16:17:07 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jan 2023 16:17:07 +0100] rev 477
- Version 0.3.6. Updated translations and bumped version.