changelog
- Wed, 26 Jun 2024 21:48:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 26 Jun 2024 21:48:49 +0200] rev 136
- Reverted gpio_pad_select_gpio() calls, added the correct include. Starting the unit works better now. Reverted some other small changes. In some parts the controller is very slow, possible spiffs issue?
- Wed, 26 Jun 2024 19:36:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 26 Jun 2024 19:36:25 +0200] rev 135
- tag release 0.3.25
- Wed, 26 Jun 2024 19:36:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 26 Jun 2024 19:36:01 +0200] rev 134
- Removed tag help
- Wed, 26 Jun 2024 19:32:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 26 Jun 2024 19:32:12 +0200] rev 133
- Added tag help for changeset 9fb33533504a
- Wed, 26 Jun 2024 18:57:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 26 Jun 2024 18:57:03 +0200] rev 132
- Version 0.3.25. Larger partitions for the binary. Added UPGRADE.md with information for this upgrade.
- Mon, 24 Jun 2024 20:55:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Jun 2024 20:55:35 +0200] rev 131
- IDF code size optimisations, reduced binary 157.379 bytes. Now it fits in the partitions.
- Mon, 24 Jun 2024 17:09:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Jun 2024 17:09:07 +0200] rev 130
- Added new files and remove obsolete.
- Mon, 24 Jun 2024 17:05:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Jun 2024 17:05:20 +0200] rev 129
- Start migration to IDF 5.1
- Mon, 19 Feb 2024 15:07:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 19 Feb 2024 15:07:28 +0100] rev 128
- Fix current year display
- Mon, 19 Feb 2024 15:02:07 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 19 Feb 2024 15:02:07 +0100] rev 127
- Version 0.3.24. Kicad upgrade affecting schema's. A recipe with a single mashstep, the step was treated as a mashout and the wrong temperature range was applied.
- Tue, 16 Jan 2024 09:51:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 16 Jan 2024 09:51:55 +0100] rev 126
- Version 0.3.23. In a decoction mash step during wait for confirm prompt, leave the setpoint as it was. Set the new temperature after confirmation. Log this.
- Sun, 14 Jan 2024 11:19:19 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Jan 2024 11:19:19 +0100] rev 125
- Some kicad upgrade, no project changes.
- Thu, 06 Oct 2022 14:17:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 06 Oct 2022 14:17:05 +0200] rev 124
- Version 0.3.22. Fixed adding Tetra Hop, it is now not added to the recipe because this hop is not added on brewday.
- Sat, 01 Oct 2022 14:23:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Oct 2022 14:23:15 +0200] rev 123
- Updated kicad drawings to kicad 6.0.8
- Mon, 26 Sep 2022 22:17:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Sep 2022 22:17:35 +0200] rev 122
- Upgraded kicad to version 6
- Sat, 25 Jun 2022 15:24:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 25 Jun 2022 15:24:55 +0200] rev 121
- Version 0.3.21. Changed HLT heatup speed calculation to 0.67 degrees/minute. Include the mash ramp times in the calculation for the initial temperature. With a combined HLT and MLT setup, the HLT preheat time is now much shorter. Fixed problems reading beerxml if there is an aroma hop. If the time was 0 or missing it was assumed to be a whirlpool hop. Now it's treated as flameout hop as it should be. Fixed sorting hop/misc additions, this could lead to missing ingredients warnings. The recipe cool temperature was treated as an integer value.
- Tue, 02 Nov 2021 14:47:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Nov 2021 14:47:43 +0100] rev 120
- Version 0.3.20 fix for equipment records create and delete.
- Sat, 31 Jul 2021 15:44:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 31 Jul 2021 15:44:20 +0200] rev 119
- Version 0.3.19. Real sensors and code cleanup.
- Fri, 30 Jul 2021 20:35:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 30 Jul 2021 20:35:04 +0200] rev 118
- Updated the README
- Fri, 30 Jul 2021 19:39:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 30 Jul 2021 19:39:02 +0200] rev 117
- Removed Delay Start code leftovers.
- Fri, 30 Jul 2021 16:45:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 30 Jul 2021 16:45:53 +0200] rev 116
- Fixed Hendi ON switch and now the switch moment is in a #define HENDI_SWITCH. Currently set at 6. Fixed the web page when going to boil, two buttons were missing. Changed the PWM log line, added information about the ON switch and current temperature.
- Thu, 29 Jul 2021 22:38:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 29 Jul 2021 22:38:30 +0200] rev 115
- Version 0.3.18
- Thu, 29 Jul 2021 22:36:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 29 Jul 2021 22:36:17 +0200] rev 114
- Fixed Brewfather beerxml import.
- Thu, 29 Jul 2021 19:57:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 29 Jul 2021 19:57:41 +0200] rev 113
- Fixed KWh measurement for Hendi equipment.
- Wed, 28 Jul 2021 22:04:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 28 Jul 2021 22:04:54 +0200] rev 112
- Removed the 1024 - again.
- Wed, 28 Jul 2021 20:42:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 28 Jul 2021 20:42:30 +0200] rev 111
- Revised the equipment edit screen, order is more logical. Changed some label names. Made room for one more setting.
- Wed, 28 Jul 2021 17:12:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 28 Jul 2021 17:12:00 +0200] rev 110
- Changed PWM power calculation during PID use.
- Sun, 18 Jul 2021 11:25:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 18 Jul 2021 11:25:55 +0200] rev 109
- Version 0.3.17. Made the Hendi PWM change official.
