Mercurial > brewboard / changelog

changelog

Fix current year display default tip

Version 0.3.24. Kicad upgrade affecting schema's. A recipe with a single mashstep, the step was treated as a mashout and the wrong temperature range was applied.

Version 0.3.23. In a decoction mash step during wait for confirm prompt, leave the setpoint as it was. Set the new temperature after confirmation. Log this.

Some kicad upgrade, no project changes.

Version 0.3.22. Fixed adding Tetra Hop, it is now not added to the recipe because this hop is not added on brewday.

Updated kicad drawings to kicad 6.0.8

Upgraded kicad to version 6

Version 0.3.21. Changed HLT heatup speed calculation to 0.67 degrees/minute. Include the mash ramp times in the calculation for the initial temperature. With a combined HLT and MLT setup, the HLT preheat time is now much shorter. Fixed problems reading beerxml if there is an aroma hop. If the time was 0 or missing it was assumed to be a whirlpool hop. Now it's treated as flameout hop as it should be. Fixed sorting hop/misc additions, this could lead to missing ingredients warnings. The recipe cool temperature was treated as an integer value.

Version 0.3.20 fix for equipment records create and delete.

Version 0.3.19. Real sensors and code cleanup.

Updated the README

Removed Delay Start code leftovers.

Fixed Hendi ON switch and now the switch moment is in a #define HENDI_SWITCH. Currently set at 6. Fixed the web page when going to boil, two buttons were missing. Changed the PWM log line, added information about the ON switch and current temperature.

Version 0.3.18

Fixed Brewfather beerxml import.

Fixed KWh measurement for Hendi equipment.

Removed the 1024 - again.

Revised the equipment edit screen, order is more logical. Changed some label names. Made room for one more setting.

Changed PWM power calculation during PID use.

Version 0.3.17. Made the Hendi PWM change official.

Inverted PWM signal for the Hendi.

Versie 0.3.16

Schema aangepast voor pullup weerstanden voor de SD kaart. Code verbeteringen in task_sdcard.

SD card completly switched to the SPI driver API.

Version 0.3.15. Back to real sensors. During cooling the target temperature is changed in 0.5 degrees steps instead of whole degrees.

Default equipment max_watt set to 2750. Added defaults for new equipment record. Switched PWM timer to high-speed. Implemented the safety timer to prevent the MLT + HLT will draw too much power in shared mode. Removed some code ideas that were not used. The fake heater now uses the faked PWM power.

Finished experimental code to drive the German HendiControl board. Added BoilPower and RampPower buttons during the while boil process. RampPower (going to boil power) is now adjustable. Added PWM driver code to the driver task.

Fixed HendiControl interface connecter to match the board input. Tested the new circuit.

Added more modules local.

Added ESP32 library inside the project.

Idee voor HendiControl sturing

Moved schematics into the project tree.

Version 0.3.14. Log brewing essentials at brew start.

Removed AP configuration settings.

Changed HTTP tasks startup code to prevent a race condition during startup. Upgraded the WiFi code to support the new esp_netif api. Removed the AP mode, WiFi is now STA (station) only.

Version 0.3.13. Recipe import parse BMS_COOLING_TO to set the cooling temperature.

No repeated logs when the SD card is removed. Supress wifi_init logs.

Added 7 sgemnt fonts for the web client. Log messages in the components more compact. Added fonts mime-types to the webserver. Switched to stable esp-idf 4.2.1. Upgraded the SD-mmc card API.

Version 0.3.12 and back to real sensors.

Added power usage counters to manual mode.

Fix missing log entries. More code space saving.

SDK settings to reduce bin size. Some log messages to debug level. Added KWH usage registration. Added equipment power usage for HLT and MLT. Equipment database upgraded to version 2, expandable. Fixed some screen errors during temperature mash steps.

Default PID init adjusted.

Version 0.3.11

Better web directory display.

Update README

The PID workig mode is fixed

Added mash temperature adjust steps if different begin and end temperatures.

Added directory sorting for the logfiles. Sort in reverse order on the timestamp so the last files will be on top.

Websocket selectors using jquery style. During cooling display the pump button on the webpage too.

Added reconnect-websocket javascript. Removed some debugging log messages.

Changed the recipe database so that it is expandable, version 2. More mash fields and allow 16 steps. Allow 20 Additions. Removed separate mash steps from the state machine, the steps are moved to the runtime data. There is no fixed step number for mashout anymore. There is no fixed step for mash-in anymore, just use the first step and heat to the infusion temperature. After malt add, switch to the normal step temperature. Implemented decoction steps.

Version 0.3.10 Updated the webui. The recipe mash infusiont temperature rounding from 0.25 to 0.0625 degrees.

Version 0.3.9. Added no-boil handling. Fixed cooling temp during cooling to allow 45 degrees setpoint.

Version 0.3.8. Switched build system to idf.py

Merged with default stable

TCP MSS from 1436 to 1440 bytes.

Fixed IP event loop.

Version 0.3.7. The WiFi task uses the new event handlers. Cooling temperature top is now 45 instead of 30 degreees for pitching Kveik. One extra cosmetic message during OTA update.

Updated the esp-idf

(0) -100 -60 tip

Mercurial Repository: brewboard

mercurial