changelog
- Mon, 24 Jun 2024 17:09:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Jun 2024 17:09:07 +0200] rev 130
- Added new files and remove obsolete.
- Mon, 24 Jun 2024 17:05:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Jun 2024 17:05:20 +0200] rev 129
- Start migration to IDF 5.1
- Mon, 19 Feb 2024 15:07:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 19 Feb 2024 15:07:28 +0100] rev 128
- Fix current year display
- Mon, 19 Feb 2024 15:02:07 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 19 Feb 2024 15:02:07 +0100] rev 127
- Version 0.3.24. Kicad upgrade affecting schema's. A recipe with a single mashstep, the step was treated as a mashout and the wrong temperature range was applied.
- Tue, 16 Jan 2024 09:51:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 16 Jan 2024 09:51:55 +0100] rev 126
- Version 0.3.23. In a decoction mash step during wait for confirm prompt, leave the setpoint as it was. Set the new temperature after confirmation. Log this.
- Sun, 14 Jan 2024 11:19:19 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Jan 2024 11:19:19 +0100] rev 125
- Some kicad upgrade, no project changes.
- Thu, 06 Oct 2022 14:17:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 06 Oct 2022 14:17:05 +0200] rev 124
- Version 0.3.22. Fixed adding Tetra Hop, it is now not added to the recipe because this hop is not added on brewday.
- Sat, 01 Oct 2022 14:23:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Oct 2022 14:23:15 +0200] rev 123
- Updated kicad drawings to kicad 6.0.8
- Mon, 26 Sep 2022 22:17:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Sep 2022 22:17:35 +0200] rev 122
- Upgraded kicad to version 6
- Sat, 25 Jun 2022 15:24:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 25 Jun 2022 15:24:55 +0200] rev 121
- Version 0.3.21. Changed HLT heatup speed calculation to 0.67 degrees/minute. Include the mash ramp times in the calculation for the initial temperature. With a combined HLT and MLT setup, the HLT preheat time is now much shorter. Fixed problems reading beerxml if there is an aroma hop. If the time was 0 or missing it was assumed to be a whirlpool hop. Now it's treated as flameout hop as it should be. Fixed sorting hop/misc additions, this could lead to missing ingredients warnings. The recipe cool temperature was treated as an integer value.
- Tue, 02 Nov 2021 14:47:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Nov 2021 14:47:43 +0100] rev 120
- Version 0.3.20 fix for equipment records create and delete.
- Sat, 31 Jul 2021 15:44:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 31 Jul 2021 15:44:20 +0200] rev 119
- Version 0.3.19. Real sensors and code cleanup.
- Fri, 30 Jul 2021 20:35:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 30 Jul 2021 20:35:04 +0200] rev 118
- Updated the README
- Fri, 30 Jul 2021 19:39:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 30 Jul 2021 19:39:02 +0200] rev 117
- Removed Delay Start code leftovers.
- Fri, 30 Jul 2021 16:45:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 30 Jul 2021 16:45:53 +0200] rev 116
- Fixed Hendi ON switch and now the switch moment is in a #define HENDI_SWITCH. Currently set at 6. Fixed the web page when going to boil, two buttons were missing. Changed the PWM log line, added information about the ON switch and current temperature.
- Thu, 29 Jul 2021 22:38:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 29 Jul 2021 22:38:30 +0200] rev 115
- Version 0.3.18
- Thu, 29 Jul 2021 22:36:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 29 Jul 2021 22:36:17 +0200] rev 114
- Fixed Brewfather beerxml import.
- Thu, 29 Jul 2021 19:57:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 29 Jul 2021 19:57:41 +0200] rev 113
- Fixed KWh measurement for Hendi equipment.
- Wed, 28 Jul 2021 22:04:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 28 Jul 2021 22:04:54 +0200] rev 112
- Removed the 1024 - again.
- Wed, 28 Jul 2021 20:42:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 28 Jul 2021 20:42:30 +0200] rev 111
- Revised the equipment edit screen, order is more logical. Changed some label names. Made room for one more setting.
- Wed, 28 Jul 2021 17:12:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 28 Jul 2021 17:12:00 +0200] rev 110
- Changed PWM power calculation during PID use.
- Sun, 18 Jul 2021 11:25:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 18 Jul 2021 11:25:55 +0200] rev 109
- Version 0.3.17. Made the Hendi PWM change official.
- Sat, 17 Jul 2021 20:21:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 17 Jul 2021 20:21:02 +0200] rev 108
- Inverted PWM signal for the Hendi.
- Mon, 05 Jul 2021 10:31:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 Jul 2021 10:31:38 +0200] rev 107
- Versie 0.3.16
- Mon, 05 Jul 2021 10:30:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 Jul 2021 10:30:05 +0200] rev 106
- Schema aangepast voor pullup weerstanden voor de SD kaart. Code verbeteringen in task_sdcard.
- Thu, 01 Jul 2021 20:26:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 01 Jul 2021 20:26:45 +0200] rev 105
- SD card completly switched to the SPI driver API.
- Tue, 22 Jun 2021 23:06:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Jun 2021 23:06:41 +0200] rev 104
- Version 0.3.15. Back to real sensors. During cooling the target temperature is changed in 0.5 degrees steps instead of whole degrees.
- Tue, 22 Jun 2021 22:21:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Jun 2021 22:21:09 +0200] rev 103
- Default equipment max_watt set to 2750. Added defaults for new equipment record. Switched PWM timer to high-speed. Implemented the safety timer to prevent the MLT + HLT will draw too much power in shared mode. Removed some code ideas that were not used. The fake heater now uses the faked PWM power.