|
1 /* |
|
2 |
|
3 u8x8_d_sh1106_72x40.c |
|
4 |
|
5 Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/) |
|
6 |
|
7 Copyright (c) 2018, olikraus@gmail.com |
|
8 All rights reserved. |
|
9 |
|
10 Redistribution and use in source and binary forms, with or without modification, |
|
11 are permitted provided that the following conditions are met: |
|
12 |
|
13 * Redistributions of source code must retain the above copyright notice, this list |
|
14 of conditions and the following disclaimer. |
|
15 |
|
16 * Redistributions in binary form must reproduce the above copyright notice, this |
|
17 list of conditions and the following disclaimer in the documentation and/or other |
|
18 materials provided with the distribution. |
|
19 |
|
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
|
21 CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
|
22 INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
23 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
24 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
|
25 CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
|
26 SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
|
27 NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
|
28 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
29 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
|
30 STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
|
31 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
|
32 ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
33 |
|
34 */ |
|
35 |
|
36 |
|
37 #include "u8x8.h" |
|
38 |
|
39 |
|
40 |
|
41 /* WiseChip 0.42 OLED, issue 547 */ |
|
42 static const uint8_t u8x8_d_sh1106_72x40_init_seq[] = { |
|
43 |
|
44 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
45 |
|
46 |
|
47 U8X8_C(0x0ae), /* display off */ |
|
48 U8X8_CA(0x0d5, 0x080), /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */ |
|
49 U8X8_CA(0x0a8, 0x027), /* multiplex ratio, 0.42 OLED */ |
|
50 U8X8_CA(0x0d3, 0x00c), /* display offset, 0.42 OLED */ |
|
51 U8X8_C(0x040), /* set display start line to 0, 0.42 OLED */ |
|
52 U8X8_CA(0xad, 0x8b), /* DC-DC ON/OFF Mode Set: Built-in DC-DC is used, Normal Display (POR = 0x8b) */ |
|
53 U8X8_C(0x33), /* set charge pump voltage 0x30 (POR) .. 0x33 */ |
|
54 U8X8_CA(0x020, 0x000), /* page addressing mode */ |
|
55 |
|
56 U8X8_C(0x0a1), /* segment remap a0/a1, 0.66 OLED */ |
|
57 U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse, 0.66 OLED */ |
|
58 // Flipmode |
|
59 // U8X8_C(0x0a0), /* segment remap a0/a1*/ |
|
60 // U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */ |
|
61 |
|
62 U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), 0.66 OLED */ |
|
63 U8X8_CA(0x081, 0x080), /* [2] set contrast control, 0.42 OLED datasheet: 0xcf */ |
|
64 U8X8_CA(0x0d9, 0x022), /* [2] pre-charge period 0x022/f1, 0.42 OLED datasheet: 0x22 */ |
|
65 U8X8_CA(0x0db, 0x028), /* vcomh deselect level, 0.42 OLED datasheet: 0x00 */ |
|
66 |
|
67 U8X8_C(0x02e), /* Deactivate scroll */ |
|
68 U8X8_C(0x0a4), /* output ram to display */ |
|
69 U8X8_C(0x0a6), /* none inverted normal display mode */ |
|
70 |
|
71 U8X8_END_TRANSFER(), /* disable chip */ |
|
72 U8X8_END() /* end of sequence */ |
|
73 }; |
|
74 |
|
75 static const uint8_t u8x8_d_sh1106_72x40_powersave0_seq[] = { |
|
76 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
77 U8X8_C(0x0af), /* display on */ |
|
78 U8X8_END_TRANSFER(), /* disable chip */ |
|
79 U8X8_END() /* end of sequence */ |
|
80 }; |
|
81 |
|
82 static const uint8_t u8x8_d_sh1106_72x40_powersave1_seq[] = { |
|
83 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
84 U8X8_C(0x0ae), /* display off */ |
|
85 U8X8_END_TRANSFER(), /* disable chip */ |
|
86 U8X8_END() /* end of sequence */ |
|
87 }; |
|
88 |
|
89 static const uint8_t u8x8_d_sh1106_72x40_flip0_seq[] = { |
|
90 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
91 U8X8_C(0x0a1), /* segment remap a0/a1*/ |
|
92 U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */ |
|
93 U8X8_CA(0x0d3, 12), /* display offset, 0.42 OLED */ |
|
94 U8X8_END_TRANSFER(), /* disable chip */ |
|
95 U8X8_END() /* end of sequence */ |
|
96 }; |
|
97 |
|
98 static const uint8_t u8x8_d_sh1106_72x40_flip1_seq[] = { |
|
99 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
100 U8X8_C(0x0a0), /* segment remap a0/a1*/ |
|
101 U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */ |
|
102 U8X8_CA(0x0d3, 52), /* What is the correct offset in flip 1 mode? --> Issue 547 */ |
|
103 U8X8_END_TRANSFER(), /* disable chip */ |
|
104 U8X8_END() /* end of sequence */ |
|
105 }; |
|
106 |
|
107 |
|
108 static uint8_t u8x8_d_sh1106_72x40_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
109 { |
|
110 uint8_t x, c; |
|
111 uint8_t *ptr; |
|
112 switch(msg) |
|
113 { |
|
114 /* handled by the calling function |
|
115 case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
116 u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1106_72x40_display_info); |
|
117 break; |
|
118 case U8X8_MSG_DISPLAY_INIT: |
|
119 u8x8_d_helper_display_init(u8x8); |
|
120 u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_72x40_init_seq); |
|
121 break; |
|
122 */ |
|
123 case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
124 if ( arg_int == 0 ) |
|
125 u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_72x40_powersave0_seq); |
|
126 else |
|
127 u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_72x40_powersave1_seq); |
|
128 break; |
|
129 case U8X8_MSG_DISPLAY_SET_FLIP_MODE: |
|
130 if ( arg_int == 0 ) |
|
131 { |
|
132 u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_72x40_flip0_seq); |
|
133 u8x8->x_offset = u8x8->display_info->default_x_offset; |
|
134 } |
|
135 else |
|
136 { |
|
137 u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_72x40_flip1_seq); |
|
138 u8x8->x_offset = u8x8->display_info->flipmode_x_offset; |
|
139 } |
|
140 break; |
|
141 #ifdef U8X8_WITH_SET_CONTRAST |
|
142 case U8X8_MSG_DISPLAY_SET_CONTRAST: |
|
143 u8x8_cad_StartTransfer(u8x8); |
|
144 u8x8_cad_SendCmd(u8x8, 0x081 ); |
|
145 u8x8_cad_SendArg(u8x8, arg_int ); /* ssd1306 has range from 0 to 255 */ |
|
146 u8x8_cad_EndTransfer(u8x8); |
|
147 break; |
|
148 #endif |
|
149 case U8X8_MSG_DISPLAY_DRAW_TILE: |
|
150 u8x8_cad_StartTransfer(u8x8); |
|
151 x = ((u8x8_tile_t *)arg_ptr)->x_pos; |
|
152 x *= 8; |
|
153 x += u8x8->x_offset; |
|
154 u8x8_cad_SendCmd(u8x8, 0x010 | (x>>4) ); |
|
155 u8x8_cad_SendCmd(u8x8, 0x000 | ((x&15))); |
|
156 u8x8_cad_SendCmd(u8x8, 0x0b0 | (((u8x8_tile_t *)arg_ptr)->y_pos)); |
|
157 |
|
158 do |
|
159 { |
|
160 c = ((u8x8_tile_t *)arg_ptr)->cnt; |
|
161 ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; |
|
162 u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */ |
|
163 arg_int--; |
|
164 } while( arg_int > 0 ); |
|
165 |
|
166 u8x8_cad_EndTransfer(u8x8); |
|
167 break; |
|
168 default: |
|
169 return 0; |
|
170 } |
|
171 return 1; |
|
172 } |
|
173 |
|
174 /* copied from SSD1306 */ |
|
175 static const u8x8_display_info_t u8x8_sh1106_72x40_display_info = |
|
176 { |
|
177 /* chip_enable_level = */ 0, |
|
178 /* chip_disable_level = */ 1, |
|
179 |
|
180 /* post_chip_enable_wait_ns = */ 20, |
|
181 /* pre_chip_disable_wait_ns = */ 10, |
|
182 /* reset_pulse_width_ms = */ 100, /* SSD1306: 3 us */ |
|
183 /* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */ |
|
184 /* sda_setup_time_ns = */ 50, /* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */ |
|
185 /* sck_pulse_width_ns = */ 50, /* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */ |
|
186 /* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns, increased to 8MHz (issue 215) */ |
|
187 /* spi_mode = */ 0, /* active high, rising edge */ |
|
188 /* i2c_bus_clock_100kHz = */ 4, |
|
189 /* data_setup_time_ns = */ 40, |
|
190 /* write_pulse_width_ns = */ 150, /* SSD1306: cycle time is 300ns, so use 300/2 = 150 */ |
|
191 /* tile_width = */ 9, |
|
192 /* tile_hight = */ 5, |
|
193 /* default_x_offset = */ 30, |
|
194 /* flipmode_x_offset = */ 30, |
|
195 /* pixel_width = */ 72, |
|
196 /* pixel_height = */ 40 |
|
197 }; |
|
198 |
|
199 /* WiseChip 0.42" OLED */ |
|
200 uint8_t u8x8_d_sh1106_72x40_wise(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
201 { |
|
202 if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY ) |
|
203 { |
|
204 u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1106_72x40_display_info); |
|
205 return 1; |
|
206 } |
|
207 else if ( msg == U8X8_MSG_DISPLAY_INIT ) |
|
208 { |
|
209 u8x8_d_helper_display_init(u8x8); |
|
210 u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_72x40_init_seq); |
|
211 return 1; |
|
212 } |
|
213 return u8x8_d_sh1106_72x40_generic(u8x8, msg, arg_int, arg_ptr); |
|
214 } |
|
215 |
|
216 |