|
1 /* |
|
2 |
|
3 u8x8_d_ssd1306_64x48.c |
|
4 |
|
5 Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/) |
|
6 |
|
7 Copyright (c) 2016, olikraus@gmail.com |
|
8 All rights reserved. |
|
9 |
|
10 Redistribution and use in source and binary forms, with or without modification, |
|
11 are permitted provided that the following conditions are met: |
|
12 |
|
13 * Redistributions of source code must retain the above copyright notice, this list |
|
14 of conditions and the following disclaimer. |
|
15 |
|
16 * Redistributions in binary form must reproduce the above copyright notice, this |
|
17 list of conditions and the following disclaimer in the documentation and/or other |
|
18 materials provided with the distribution. |
|
19 |
|
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
|
21 CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
|
22 INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
23 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
24 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
|
25 CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
|
26 SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
|
27 NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
|
28 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
29 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
|
30 STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
|
31 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
|
32 ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
33 |
|
34 */ |
|
35 |
|
36 |
|
37 #include "u8x8.h" |
|
38 |
|
39 |
|
40 |
|
41 /* EastRising 0.66 OLED */ |
|
42 static const uint8_t u8x8_d_ssd1306_64x48_er_init_seq[] = { |
|
43 |
|
44 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
45 |
|
46 |
|
47 U8X8_C(0x0ae), /* display off */ |
|
48 U8X8_CA(0x0d5, 0x080), /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */ |
|
49 U8X8_CA(0x0a8, 0x02f), /* multiplex ratio, 0.66 OLED: changed from 0x1f to 0x2f */ |
|
50 U8X8_CA(0x0d3, 0x000), /* display offset, 0.66 OLED */ |
|
51 U8X8_C(0x040), /* set display start line to 0, 0.66 OLED */ |
|
52 U8X8_CA(0x08d, 0x014), /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable, 0.66 OLED 0x14*/ |
|
53 U8X8_CA(0x020, 0x000), /* page addressing mode */ |
|
54 |
|
55 U8X8_C(0x0a1), /* segment remap a0/a1, 0.66 OLED */ |
|
56 U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse, 0.66 OLED */ |
|
57 // Flipmode |
|
58 // U8X8_C(0x0a0), /* segment remap a0/a1*/ |
|
59 // U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */ |
|
60 |
|
61 U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), 0.66 OLED */ |
|
62 U8X8_CA(0x081, 0x0cf), /* [2] set contrast control, 0.66 OLED datasheet: 0xcf */ |
|
63 U8X8_CA(0x0d9, 0x022), /* [2] pre-charge period 0x022/f1, 0.66 OLED datasheet: 0x22 */ |
|
64 U8X8_CA(0x0db, 0x000), /* vcomh deselect level, 0.66 OLED datasheet: 0x00 */ |
|
65 |
|
66 U8X8_C(0x02e), /* Deactivate scroll */ |
|
67 U8X8_C(0x0a4), /* output ram to display */ |
|
68 U8X8_C(0x0a6), /* none inverted normal display mode */ |
|
69 |
|
70 U8X8_END_TRANSFER(), /* disable chip */ |
|
71 U8X8_END() /* end of sequence */ |
|
72 }; |
|
73 |
|
74 static const uint8_t u8x8_d_ssd1306_64x48_powersave0_seq[] = { |
|
75 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
76 U8X8_C(0x0af), /* display on */ |
|
77 U8X8_END_TRANSFER(), /* disable chip */ |
|
78 U8X8_END() /* end of sequence */ |
|
79 }; |
|
80 |
|
81 static const uint8_t u8x8_d_ssd1306_64x48_powersave1_seq[] = { |
|
82 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
83 U8X8_C(0x0ae), /* display off */ |
|
84 U8X8_END_TRANSFER(), /* disable chip */ |
|
85 U8X8_END() /* end of sequence */ |
|
86 }; |
|
87 |
|
88 static const uint8_t u8x8_d_ssd1306_64x48_flip0_seq[] = { |
|
89 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
90 U8X8_C(0x0a1), /* segment remap a0/a1*/ |
|
91 U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */ |
|
92 U8X8_END_TRANSFER(), /* disable chip */ |
|
93 U8X8_END() /* end of sequence */ |
|
94 }; |
|
95 |
|
96 static const uint8_t u8x8_d_ssd1306_64x48_flip1_seq[] = { |
|
97 U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */ |
|
98 U8X8_C(0x0a0), /* segment remap a0/a1*/ |
|
99 U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */ |
|
100 U8X8_END_TRANSFER(), /* disable chip */ |
|
101 U8X8_END() /* end of sequence */ |
|
102 }; |
|
103 |
|
104 |
|
105 static uint8_t u8x8_d_ssd1306_64x48_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
106 { |
|
107 uint8_t x, c; |
|
108 uint8_t *ptr; |
|
109 switch(msg) |
|
110 { |
|
111 /* handled by the calling function |
|
112 case U8X8_MSG_DISPLAY_SETUP_MEMORY: |
|
113 u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_64x48_display_info); |
|
114 break; |
|
115 case U8X8_MSG_DISPLAY_INIT: |
|
116 u8x8_d_helper_display_init(u8x8); |
|
117 u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_64x48_er_init_seq); |
|
118 break; |
|
119 */ |
|
120 case U8X8_MSG_DISPLAY_SET_POWER_SAVE: |
|
121 if ( arg_int == 0 ) |
|
122 u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_64x48_powersave0_seq); |
|
123 else |
|
124 u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_64x48_powersave1_seq); |
|
125 break; |
|
126 case U8X8_MSG_DISPLAY_SET_FLIP_MODE: |
|
127 if ( arg_int == 0 ) |
|
128 { |
|
129 u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_64x48_flip0_seq); |
|
130 u8x8->x_offset = u8x8->display_info->default_x_offset; |
|
131 } |
|
132 else |
|
133 { |
|
134 u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_64x48_flip1_seq); |
|
135 u8x8->x_offset = u8x8->display_info->flipmode_x_offset; |
|
136 } |
|
137 break; |
|
138 #ifdef U8X8_WITH_SET_CONTRAST |
|
139 case U8X8_MSG_DISPLAY_SET_CONTRAST: |
|
140 u8x8_cad_StartTransfer(u8x8); |
|
141 u8x8_cad_SendCmd(u8x8, 0x081 ); |
|
142 u8x8_cad_SendArg(u8x8, arg_int ); /* ssd1306 has range from 0 to 255 */ |
|
143 u8x8_cad_EndTransfer(u8x8); |
|
144 break; |
|
145 #endif |
|
146 case U8X8_MSG_DISPLAY_DRAW_TILE: |
|
147 u8x8_cad_StartTransfer(u8x8); |
|
148 x = ((u8x8_tile_t *)arg_ptr)->x_pos; |
|
149 x *= 8; |
|
150 x += u8x8->x_offset; |
|
151 u8x8_cad_SendCmd(u8x8, 0x010 | (x>>4) ); |
|
152 u8x8_cad_SendCmd(u8x8, 0x000 | ((x&15))); |
|
153 u8x8_cad_SendCmd(u8x8, 0x0b0 | (((u8x8_tile_t *)arg_ptr)->y_pos)); |
|
154 |
|
155 do |
|
156 { |
|
157 c = ((u8x8_tile_t *)arg_ptr)->cnt; |
|
158 ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; |
|
159 u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */ |
|
160 arg_int--; |
|
161 } while( arg_int > 0 ); |
|
162 |
|
163 u8x8_cad_EndTransfer(u8x8); |
|
164 break; |
|
165 default: |
|
166 return 0; |
|
167 } |
|
168 return 1; |
|
169 } |
|
170 |
|
171 |
|
172 static const u8x8_display_info_t u8x8_ssd1306_64x48_display_info = |
|
173 { |
|
174 /* chip_enable_level = */ 0, |
|
175 /* chip_disable_level = */ 1, |
|
176 |
|
177 /* post_chip_enable_wait_ns = */ 20, |
|
178 /* pre_chip_disable_wait_ns = */ 10, |
|
179 /* reset_pulse_width_ms = */ 100, /* SSD1306: 3 us */ |
|
180 /* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */ |
|
181 /* sda_setup_time_ns = */ 50, /* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */ |
|
182 /* sck_pulse_width_ns = */ 50, /* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */ |
|
183 /* sck_clock_hz = */ 8000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns, increased to 8MHz (issue 215) */ |
|
184 /* spi_mode = */ 0, /* active high, rising edge */ |
|
185 /* i2c_bus_clock_100kHz = */ 4, |
|
186 /* data_setup_time_ns = */ 40, |
|
187 /* write_pulse_width_ns = */ 150, /* SSD1306: cycle time is 300ns, so use 300/2 = 150 */ |
|
188 /* tile_width = */ 8, |
|
189 /* tile_hight = */ 6, |
|
190 /* default_x_offset = */ 32, |
|
191 /* flipmode_x_offset = */ 32, |
|
192 /* pixel_width = */ 64, |
|
193 /* pixel_height = */ 48 |
|
194 }; |
|
195 |
|
196 /* East Rising 0.66" OLED */ |
|
197 uint8_t u8x8_d_ssd1306_64x48_er(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) |
|
198 { |
|
199 if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY ) |
|
200 { |
|
201 u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_64x48_display_info); |
|
202 return 1; |
|
203 } |
|
204 else if ( msg == U8X8_MSG_DISPLAY_INIT ) |
|
205 { |
|
206 u8x8_d_helper_display_init(u8x8); |
|
207 u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_64x48_er_init_seq); |
|
208 return 1; |
|
209 } |
|
210 return u8x8_d_ssd1306_64x48_generic(u8x8, msg, arg_int, arg_ptr); |
|
211 } |
|
212 |
|
213 |