--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/components/u8g2/csrc/u8x8_d_sh1108.c Tue Oct 08 12:00:31 2019 +0200
@@ -0,0 +1,225 @@
+/*
+
+ u8x8_d_sh1108.c
+
+ Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+ Copyright (c) 2018, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+
+#include "u8x8.h"
+
+/*
+ code copyied from sh1107
+ SH1108: 160x160 controller from Sino Wealth
+*/
+
+
+
+static const uint8_t u8x8_d_sh1108_noname_powersave0_seq[] = {
+ U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
+ U8X8_C(0x0af), /* display on */
+ U8X8_END_TRANSFER(), /* disable chip */
+ U8X8_END() /* end of sequence */
+};
+
+static const uint8_t u8x8_d_sh1108_noname_powersave1_seq[] = {
+ U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
+ U8X8_C(0x0ae), /* display off */
+ U8X8_END_TRANSFER(), /* disable chip */
+ U8X8_END() /* end of sequence */
+};
+
+static const uint8_t u8x8_d_sh1108_160x160_noname_powersave0_seq[] = {
+ U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
+ U8X8_C(0x0a0), /* segment remap a0/a1*/
+ U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
+ U8X8_END_TRANSFER(), /* disable chip */
+ U8X8_END() /* end of sequence */
+};
+
+static const uint8_t u8x8_d_sh1108_160x160_noname_powersave1_seq[] = {
+ U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
+ U8X8_C(0x0a1), /* segment remap a0/a1*/
+ U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
+ U8X8_END_TRANSFER(), /* disable chip */
+ U8X8_END() /* end of sequence */
+};
+
+
+static uint8_t u8x8_d_sh1108_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+ uint8_t x, c;
+ uint8_t *ptr;
+ switch(msg)
+ {
+ /* handled by the calling function
+ case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+ u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1108_64x128_noname_display_info);
+ break;
+ */
+ /* handled by the calling function
+ case U8X8_MSG_DISPLAY_INIT:
+ u8x8_d_helper_display_init(u8x8);
+ u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_64x128_noname_init_seq);
+ break;
+ */
+ case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
+ if ( arg_int == 0 )
+ u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_noname_powersave0_seq);
+ else
+ u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_noname_powersave1_seq);
+ break;
+ case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
+ if ( arg_int == 0 )
+ {
+ u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_160x160_noname_powersave0_seq);
+ u8x8->x_offset = u8x8->display_info->default_x_offset;
+ }
+ else
+ {
+ u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_160x160_noname_powersave1_seq);
+ u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
+ }
+ break;
+#ifdef U8X8_WITH_SET_CONTRAST
+ case U8X8_MSG_DISPLAY_SET_CONTRAST:
+ u8x8_cad_StartTransfer(u8x8);
+ u8x8_cad_SendCmd(u8x8, 0x081 );
+ u8x8_cad_SendArg(u8x8, arg_int ); /* sh1108 has range from 0 to 255 */
+ u8x8_cad_EndTransfer(u8x8);
+ break;
+#endif
+ case U8X8_MSG_DISPLAY_DRAW_TILE:
+ u8x8_cad_StartTransfer(u8x8);
+ x = ((u8x8_tile_t *)arg_ptr)->x_pos;
+ x *= 8;
+ x += u8x8->x_offset;
+
+ //u8x8_cad_SendCmd(u8x8, 0x040 ); /* set line offset to 0 */
+
+ // set column address
+ u8x8_cad_SendCmd(u8x8, 0x010 | (x >> 4));
+ u8x8_cad_SendCmd(u8x8, 0x000 | ((x & 15)));
+
+ // set page address
+ u8x8_cad_SendCmd(u8x8, 0x0b0 ); // page cmd is a two byte command
+ u8x8_cad_SendArg(u8x8, (((u8x8_tile_t *)arg_ptr)->y_pos));
+
+ do
+ {
+ c = ((u8x8_tile_t *)arg_ptr)->cnt;
+ ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+ u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */
+ arg_int--;
+ } while( arg_int > 0 );
+
+ u8x8_cad_EndTransfer(u8x8);
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
+/*==================================================*/
+
+/* issue #619, 160x160 OLED */
+static const uint8_t u8x8_d_sh1108_160x160_noname_init_seq[] = {
+
+ U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
+
+ U8X8_C(0x0ae), /* display off */
+ U8X8_CA(0x0d5, 0x060), /* clock divide ratio and oscillator frequency */
+ U8X8_CA(0x0a9, 0x003), /* set display resolution, 0=64x160, 1=96x160, 2=128x160, 3=160x160 */
+ U8X8_C(0x020), /* use page addressing mode */
+ U8X8_CA(0x081, 0x01f), /* set contrast control */
+ U8X8_CA(0x0ad, 0x80), /* DC/DC control 80=Use external Vpp, 89=Use internal DC/DC*/
+ U8X8_C(0x030), /* set discharge VSL level, 0x030..0x03f */
+ U8X8_CA(0x0d9, 0x028), /* pre-charge period */
+ U8X8_CA(0x0db, 0x035), /* vcomh deselect level */
+ U8X8_CA(0x0dc, 0x035), /* VSEGM Deselect Level */
+
+ U8X8_C(0x0a0), /* segment remap a0/a1*/
+ U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
+
+ U8X8_C(0x0a4), /* output ram to display */
+ U8X8_C(0x0a6), /* none inverted normal display mode */
+
+ U8X8_END_TRANSFER(), /* disable chip */
+ U8X8_END() /* end of sequence */
+};
+
+static const u8x8_display_info_t u8x8_sh1108_160x160_noname_display_info =
+{
+ /* chip_enable_level = */ 0,
+ /* chip_disable_level = */ 1,
+
+ /* post_chip_enable_wait_ns = */ 60,
+ /* pre_chip_disable_wait_ns = */ 120,
+ /* reset_pulse_width_ms = */ 100, /* sh1108: 3 us */
+ /* post_reset_wait_ms = */ 100, /* sometimes OLEDs need much longer setup time */
+ /* sda_setup_time_ns = */ 100, /* sh1108: 100ns */
+ /* sck_pulse_width_ns = */ 100, /* sh1108: 100ns */
+ /* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
+ /* spi_mode = */ 0, /* active high, rising edge */
+ /* i2c_bus_clock_100kHz = */ 4,
+ /* data_setup_time_ns = */ 40,
+ /* write_pulse_width_ns = */ 150, /* sh1108: cycle time is 300ns, so use 300/2 = 150 */
+ /* tile_width = */ 20,
+ /* tile_height = */ 20,
+ /* default_x_offset = */ 0,
+ /* flipmode_x_offset = */ 0,
+ /* pixel_width = */ 160,
+ /* pixel_height = */ 160
+};
+
+uint8_t u8x8_d_sh1108_160x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+
+ if ( u8x8_d_sh1108_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
+ return 1;
+
+ switch(msg)
+ {
+ case U8X8_MSG_DISPLAY_INIT:
+ u8x8_d_helper_display_init(u8x8);
+ u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_160x160_noname_init_seq);
+ break;
+ case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+ u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1108_160x160_noname_display_info);
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
+/*==================================================*/