components/u8g2/ChangeLog@15dc572a7fcb
components/u8g2/ChangeLog
Tue, 03 Oct 2023 17:24:06 +0200
- author
- Michiel Broek <mbroek@mbse.eu>
- date
- Tue, 03 Oct 2023 17:24:06 +0200
- changeset 77
- 15dc572a7fcb
- parent 0
- 88d965579617
- permissions
- -rw-r--r--
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
https://github.com/olikraus/u8g2 ChangeLog 2016-04-30 v2.0.1 olikraus@gmail.com * Support for DOGS102, ST7920, SSD1306 * Most graphics primitives are implemented 2016-05-15 v2.0.3 olikraus@gmail.com * Support for Adafruit FeatherWing 128x32 OLED * Added Wire.h support (I2C for SSD1306) * Successfully tested with Adafruit ESP8266 Feather Board (HW+SW I2C) * Successfully tested with Adafruit Feather M0 Basic Board (HW+SW I2C) 2016-06-12 v2.0.4 olikraus@gmail.com * Support for ST7565 2016-06-25 v2.0.6 olikraus@gmail.com * User interface functions * Little Rook Chess ported * ST7920 HW and SW SPI 2016-06-26 v2.0.7 olikraus@gmail.com * drawLine * GraphicsTest Example 2016-08-09 v2.1.5 olikraus@gmail.com * T6963 Support * Experimental Support for SSD1322 256x64 * A2 Thermoprinter Support * Added several fonts from http://int10h.org/oldschool-pc-fonts/ * Added Arabic, Greek and Cyrillic fonts. * Code cleanup (assert, spi modes, void * warning) 2016-08-17 v2.2.7 olikraus@gmail.com * U8x8: Upscale by 2 (Issue 41) * Fixed SSD1306 I2C procedures (mirror pixel in last tile column, issue 44) * Experimental support für mini12864 (pull request) * Use beginTransaction for SPI. This requires Arduino 1.6.0 2016-08-18 v2.3.2 olikraus@gmail.com * MINI12874; Fixed HW Flip Mode (pull request 49) * Fixed ST7920 HW SPI with very fast uC, issue 50 * Improved HW SPI for SH1106 and SSD1306 displays * Fixed issue with missing fonts 2016-08-21 v2.4.1 olikraus@gmail.com * Fixed HW SPI Modes (issue 52) 2016-10-01 v2.5.2 olikraus@gmail.com * Added crox fonts (issue 57) * Support for RA8835 (issue 45) * Added support for SSD1322 and SSD1325 * Added DrawXBMP (AVR: Assume bitmap in PROGMEM) * Added japanese fonts (issue 65) 2016-11-13 v2.6.3 olikraus@gmail.com * Added support for UC1610 (EA DOGXL160) * Use Wire.setClock() for improved HW I2C performance (issue 79). This requires Arduino IDE 1.6.0 or higher. * Added Thai Fonts (issue 73) * Added support for "\n" in the print function for u8x8 (issue 74) * Screen mirror option for U8g2 (issue 76) * Added support for second wire interface (Constructor postfix 2ND_HW_I2C) * Added support for UC1611 (EA DOGM240 and EA DOGXL240, issue 66) 2016-11-28 v2.7.5 olikraus@gmail.com * Added support for 0.66" 64x48 SSD1306 OLED (issue 89) * Support for UC1608 (issue 92) * Speed improvements for SW SPI und 8080 mode (issues 87, 90 and 95) * Fixed issue with ST7920 not using the optimized SW SPI procedures (issue 87) * Direct buffer API (issue 93) 2016-12-11 v2.8.4 olikraus@gmail.com * Increased contrast range for SSD1306 (issue 98) * Support for KS0108 (issue 88) * Support for UC1608 240x128 (issue 101) * Speed improvement (issue 96) 2016-12-12 v2.8.5 olikraus@gmail.com * Bugfix for issue 96 (issue 106) 2016-12-20 v2.9.1 olikraus@gmail.com * Speed improvement for AVR/KS0108 (issue 104) * Support for UC1604 (issue 111) * Support for PCD8544/Nokia Display (issue 107) * Change/fixed behavior of userInterfaceSelectionList (issue 112) 2016-12-23 v2.9.2 olikraus@gmail.com * Reverted the setup for SSD1306_NONAME to the original setup (undo issue 98) * Introduced SSD1306_VCOMH0 for the max range setup (issue 116) 2016-12-30 v2.10.1 olikraus@gmail.com * ST7565 LM6059 Display (issue 123) * SSD1606 eInk/ePaper Display (issue 100) * Documentation updates 2017-01-08 v2.11.4 olikraus@gmail.com * Support for LC7981 (issue 134) * Support for PCF8812 (issue 135) * Fixed wrong half-move notation in Little Rook Chess (issue 137) * Support for ST7567, Pax Instruments GLCD Shield (issue 138) * Support for NT7534 (issue 143) * Support for SSD1327, Seeedstudio OLED (issue 145) * Support for SSD1305 (issue 146) * Support for DOGM132 (issue 147) * Fixed a bug in the draw pixel procedure which appears in full buffer mode, if the display width is not a multiple of 8 (issue 148) * Added XOR mode (setDrawColor 2, issue 56) 2017-01-15 v2.12.6 olikraus@gmail.com * Support for SSD1309 (issue 113) * Enabled U8G2_HVLINE_SPEED_OPTIMIZATION (not sure why this was disabled) * Improved speed for ST7920 (up to 40%, issue 151) * Support for IST3020 (issue 153) 2017-02-07 v2.13.6 olikraus@gmail.com * Support for ST7588 (issue 154) * ESP8266: Avoid RAM copy of the fonts (issue 159) * Support for SSD1607 (issue 133) * Support for hardware pin remapping on the ESP8266 (issue 158) * Bugfix for the KS0108 support (issue 168) * More fonts: https://github.com/olikraus/u8g2/wiki/fntgrpnbp (issue 174) 2017-03-11 v2.14.7 olikraus@gmail.com * Bugfix: setFont does no longer resets the reference position (issue 195) * Support for ST7565 NHD C12864 (issue 186) * Support for SSD1329 128x96 OLED (issue 208) * Support for LC7981 240x128 (issue 193) * Performance improvement for the ST7920 (issue 200) 2017-05-22 v2.15.2 olikraus@gmail.com * Added setBitmapMode (pull request 220) Warning: Default behavior of drawXBM has changed in this release. * Increased SPI speed to 8MHz for SSD1306, SH1106 and SSD1322 (issue 215) * Added some more examples (issue 216) * Added Urdu, Bengali, Hebrew and Polish language fonts (issues 221, 246 and 266) * Added more examples (issue 216) * Updated code for NHD C12864 (issues 219 and 241) * Improved speed for HW SPI with SSD13xx OLEDs (issue 215) 2017-08-12 v2.16.9 olikraus@gmail.com * Fonts u8g2_font_unifont_t_korean1, u8g2_font_unifont_t_korean2 (issue 266) * Added support for 64128N ST7565 based display (issue 292) * Added extended fonts (_te, unicodes 32-701, issue 284) * Added support for MAX7219 (issue 280) * Performance optimization for SSD1322/25/27 (issue 302) * Fixed setContrast for SSD1322 (issue 328) * Support for 96x16 SSD1306 OLED (issue 295) * Fixed OldStandard-Bold fonts (osb, issue 306) * Support for SED1520/SBN1661 (issue 324) 2017-09-10 v2.17.11 olikraus@gmail.com * Additional _m_ and _h_ symbol fonts (issue 335) * Added parallel interfaces for several UC16xx devices (issue 339) * Support for IL3820, WaveShare 2.9" e-paper (issues 318 & 347) * Improved debounce algorithm (issue 338) * Power save mode for SSD1607 device (issue 352) 2017-09-30 v2.18.13 olikraus@gmail.com * Support for ST7567_JLX12864 (issue 365) * Support for UC1611 (no "s") (issue 339) * Fixed several issues related to the _F_ (full buffer) mode (issue 370) 2017-10-13 v2.19.8 olikraus@gmail.com * Support for UC1601 (issue 378) * Support for ESP32 I2C pin remapping (issue 377) * Support for ST75256 (SPI), JLX256128, JLX172104 (issue 163) * Added uw-ttyp0 fonts (issue 349) 2017-12-09 v2.20.13 olikraus@gmail.com * Bugfix for drawBitmap (issue 391) * I2C support for ST75256 (issue 384) * Support for SSD1327 128x128 display (issue 397) * Support for ST75256 JLX25664 display (issue 399) * Added keywords.txt (issue 402) * Experimental support for SSD1326 (issue 398) * Experimental alternative COM config for SSD1306 128x64 (issue 408) * New SH1106 init sequence (SH1106_WINSTAR, issue 316) * Support for SSD1322 NHD 128x64 (issue 412) * Fixed profont17 (issue 438) 2018-02-18 v2.21.8 olikraus@gmail.com * Support for SH1107 (issue 501) * Support for HX1230 (issue 469) * Bugfix for displays with display height not a multiple of 8 (issue 469) * FontUsage demo for full buffer mode (issue 490) * Added 1x2 (double height) draw procedures to U8x8 (issue 474) With this feature a 128x32 display can replace a 16x2 Char LCD. * New constructor for the Good Display 200x200 eInk (issue 454) * Update for the ST7920 device for more stable output (issue 487) * Double height (2x1) chars for U8x8 API (issue 474) * Excluded I2C for several ATMega uC which do not have HW I2C (issue 508) * Fixed UC1610 contrast command (issue 428) * Added WQY Chinese fonts at sizes 12, 13, 14, 15 and 16 including gb2312 support (issue 455) * Added new full buffer demo for the Chinese fonts (Shennong.ino, issue #455) * Added siji icon font u8g2_font_siji_t_6x10 (issue 451) 2018-04-30 v2.22.18 olikraus@gmail.com * Bugfix for draw1x2string (u8x8 API) * Changed return value for "begin()" (issue 518) * New feature: U8log, https://github.com/olikraus/u8g2/wiki/u8logreference * Added SSD1306 128x64 Adafruit OLED (issue 521) * Added Winstart SSD1306 64x48 OLED variant (issue 522) * Added support for JLX240160 (issue 556) * Added support for JLX12864 (ST7565 variant, issue 440) * Added support for JLX256160 (issue 561) * Added support for SH1122 256x64 OLED (issue 420) * Added open iconic icons (issue 535) * Added several Persian fonts (issue 541) * Added additional Japanese font variants (issue 581) * Added Devanagari/Hindi font variant (issue 584) * Added tom-thumb font (issue 563) * Added AVR specific optimization for 3-wire Software SPI (issue 586) 2018-08-24 v2.23.18 olikraus@gmail.com * NEW FONT FORMAT for speedup of the unicode font section (issue 596) * Fixed a bug in the font construction for monospaced fonts (issue 669) * Fixed a bug with the CS line for huge KS0108 displays (issue 631) * Fixed #if's for some AVR uC (issue 662) * Added support for SH1108 controller (issue 619) * Added support for T6963 160x80 Displays (issue 635) * Added support for EA W128128 (issue 641) * Added support for LC7981 240x64 (issue 642) * Added support for ST7567 ENH-DG128064 (issue 616) * Included pull request for ST7586, support for ERC240160 & s028hn118a (pull request 660) * Added SpaceTrash game (issue 622) * Added contributed 7-segment font, https://github.com/olikraus/u8g2/wiki/fntgrpu8g#7segments_26x42 (issue 634) * Added several fonts from fontstruct.com, https://github.com/olikraus/u8g2/wiki/fntgrpfontstruct (issue 687)# This also includes several outline fonts. 2018-10-28 v2.24.3 olikraus@gmail.com * Added clip window support (issue 364) * Added setBusClock() proc to change the I2C/SPI bus clock speed (Arduino only, issue 705) * Added sleep mode for ST7920 (issue 245) * Added support for SSD0323 (issue 720) 2019-02-09 v2.25.10 olikraus@gmail.com * Improved speed for I2C with SSD1306 controller: 4% faster now (issue 735) * Fixed code problems (issues 766 and 754) * Added battery symbols and emoticons (issue 747) * New U8x8 font format, added large U8x8 fonts (issue 771) * Added alternative version for ERC12864 (issue 790) * Added Waveshare SSD1607 200x200 support (issue 637) * Added support for SSD1318 (issue 784) * Partial display update with updateDisplayArea (issue 736) * Several new decorative and fancy fonts from pentacom.jp (issue 801) 2019-06-30 v2.26.14 olikraus@gmail.com * Support for Pimoroni 128x128 OLED SH1107 (issue 803) * Support for Grove 128x128 OLED SH1107 (issue 877) * Support for Winstar 256x128 ST75256 (ST75256_WO256X128, issue 891) * Bugfix: Open Iconic 1x for U8x8 (issue 828) * Added sendF command for direct communication with the display (issues 822, 878, 896) * Support for CG160160 UC1611 (issue 884) * Support for LM6063 128x64 ST7565 (issue 893) * Added fonts from pentacom (issue 810) * Support for ST7511 (issue 876) * Support for SSD1316 132x32 (issue 919) * Support for ST75320 (issue 921) * Added JLX256160M for mirrored version of the JLX256160 display (issue 930) * Unifont update to 12.1.02, added several plane 1 fonts (issue 931) * bdfconv.exe: Windows exe created, bugfix with -d option (issue 833) 2019-xx-xx v2.27.x olikraus@gmail.com * Support for IST7920 (issue 999). Note: IST7920 has nothing todo with ST7920
