changelog
- Wed, 04 Oct 2023 11:28:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 04 Oct 2023 11:28:49 +0200] rev 80
- Version 0.3.1. Remove obsolete files from spiffs filesystem. Removed obsolete wifi stations.conf file and functions. Removed obsolete user screens.
- Tue, 03 Oct 2023 19:55:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 03 Oct 2023 19:55:34 +0200] rev 79
- A dirty hack to reconnect to a better AP
- Tue, 03 Oct 2023 19:43:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 03 Oct 2023 19:43:22 +0200] rev 78
- Changes in the main timing loop and corrected the loop time.
- Tue, 03 Oct 2023 17:24:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 03 Oct 2023 17:24:06 +0200] rev 77
- Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
- Thu, 28 Sep 2023 11:29:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 28 Sep 2023 11:29:23 +0200] rev 76
- Some ADC code simplified.
- Tue, 26 Sep 2023 15:15:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 15:15:09 +0200] rev 75
- Merged
- Tue, 26 Sep 2023 15:10:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 15:10:25 +0200] rev 74
- Migrated to isp-idf v5.1
- Tue, 26 Sep 2023 14:59:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 14:59:06 +0200] rev 73
- Migrated to isp-idf v5.1
- Tue, 26 Sep 2023 14:57:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 14:57:18 +0200] rev 72
- Migrated to isp-idf v5.1
- Tue, 26 Sep 2023 14:56:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 14:56:04 +0200] rev 71
- Migrated ADC converter to isp-idf v5.1
- Tue, 26 Sep 2023 14:51:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 14:51:37 +0200] rev 70
- Migrated ADC converter to isp-idf v5.1
- Tue, 26 Sep 2023 14:50:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 14:50:55 +0200] rev 69
- Migrated ADC converter to isp-idf v5.1
- Tue, 26 Sep 2023 14:49:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 14:49:49 +0200] rev 68
- Migrated ADC converter to isp-idf v5.1
- Tue, 26 Sep 2023 10:39:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Sep 2023 10:39:56 +0200] rev 67
- Partition layout the same as esp-idf 5.1
- Tue, 21 Mar 2023 09:25:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 21 Mar 2023 09:25:50 +0100] rev 66
- Upgraded to kicad 7.x
- Sat, 01 Oct 2022 13:27:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Oct 2022 13:27:34 +0200] rev 65
- Updated kicad drawings to kicad 6.0.8
- Thu, 24 Jun 2021 14:07:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Jun 2021 14:07:49 +0200] rev 64
- Changed to esp-idf 4.2.1 stable API.
- Mon, 31 May 2021 16:52:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 31 May 2021 16:52:10 +0200] rev 63
- Added kicad schemas
- Wed, 19 May 2021 19:42:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 19 May 2021 19:42:21 +0200] rev 62
- Uodated to stable esp-idf 4.2.1
- Fri, 18 Sep 2020 12:55:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Sep 2020 12:55:03 +0200] rev 61
- Leave old temperature when there is a sensor read error.
- Mon, 15 Jun 2020 13:38:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 15 Jun 2020 13:38:46 +0200] rev 60
- write_units now overwrites instead of truncate/write the records. Add ssid to the node mqtt message. Lower rotary log messages. Removed most menu log messages.
- Mon, 15 Jun 2020 12:08:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 15 Jun 2020 12:08:21 +0200] rev 59
- Better check for a corrupted units file. Added a small boot delay to prevent units file corruption.
- Sun, 14 Jun 2020 22:35:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Jun 2020 22:35:24 +0200] rev 58
- Lower loglevel for one message.
- Sun, 14 Jun 2020 14:53:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Jun 2020 14:53:06 +0200] rev 57
- Code cleanup, doxygen comments added.