Mercurial > iotbalkon / changelog

Version 0.4.3. Attempt to fix the sunlight overflow of the APDS9930 sensor in the private part of the esp-idf-lib. Removed some error checks from functions that always return OK. Store light sensor registers in the state record and report the values in the json result string. default tip

• Sun, 10 Sep 2023 17:29:15 +0200
• by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Sep 2023 17:29:15 +0200] rev 37
• Version 0.4.3. Attempt to fix the sunlight overflow of the APDS9930 sensor in the private part of the esp-idf-lib. Removed some error checks from functions that always return OK. Store light sensor registers in the state record and report the values in the json result string.

Moved the kicad drawing into the project.

• Thu, 20 Apr 2023 15:19:31 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Apr 2023 15:19:31 +0200] rev 36
• Moved the kicad drawing into the project.

Version 0.4.2, some code cleanup.

• Thu, 20 Apr 2023 14:01:29 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Apr 2023 14:01:29 +0200] rev 35
• Version 0.4.2, some code cleanup.

Global settings for the INA219 boards.

• Wed, 19 Apr 2023 15:38:42 +0200
• by Michiel Broek <mbroek@mbse.eu> [Wed, 19 Apr 2023 15:38:42 +0200] rev 34
• Global settings for the INA219 boards.

Removed all BLE code. It is not usefull in this application.

• Mon, 17 Apr 2023 16:53:38 +0200
• by Michiel Broek <mbroek@mbse.eu> [Mon, 17 Apr 2023 16:53:38 +0200] rev 33
• Removed all BLE code. It is not usefull in this application.

Version 0.4.1 Measure internal chip temperature, range -10 to 80. Result available in mqtt json payload.

• Mon, 17 Apr 2023 16:20:58 +0200
• by Michiel Broek <mbroek@mbse.eu> [Mon, 17 Apr 2023 16:20:58 +0200] rev 32
• Version 0.4.1 Measure internal chip temperature, range -10 to 80. Result available in mqtt json payload.

Added basic BLE code.

• Mon, 17 Apr 2023 14:54:35 +0200
• by Michiel Broek <mbroek@mbse.eu> [Mon, 17 Apr 2023 14:54:35 +0200] rev 31
• Added basic BLE code.

Preparations for BLE GATT. Added extra time after INA219 is powered on before measurement. Reduced LEDC frequency to 60 Hz, that makes the LED lights less nervous. Hardware mod on output 4, now needs external pulldown resistor.

• Sun, 16 Apr 2023 12:27:12 +0200
• by Michiel Broek <mbroek@mbse.eu> [Sun, 16 Apr 2023 12:27:12 +0200] rev 30
• Preparations for BLE GATT. Added extra time after INA219 is powered on before measurement. Reduced LEDC frequency to 60 Hz, that makes the LED lights less nervous. Hardware mod on output 4, now needs external pulldown resistor.

Final release and installed for production.

• Sat, 15 Apr 2023 13:29:40 +0200
• by Michiel Broek <mbroek@mbse.eu> [Sat, 15 Apr 2023 13:29:40 +0200] rev 29
• Final release and installed for production.

Added INA219 power save mode again, it works now. Don't measure shunt voltage and current, just the shunt voltage and calculate the current.

• Thu, 13 Apr 2023 15:28:11 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 13 Apr 2023 15:28:11 +0200] rev 28
• Added INA219 power save mode again, it works now. Don't measure shunt voltage and current, just the shunt voltage and calculate the current.

Adjusted BMP280 default parameters for low power usage.

• Thu, 13 Apr 2023 14:29:41 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 13 Apr 2023 14:29:41 +0200] rev 27
• Adjusted BMP280 default parameters for low power usage.

Version 0.4.0. Disable normal logging mqtt.

• Thu, 13 Apr 2023 12:08:24 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 13 Apr 2023 12:08:24 +0200] rev 26
• Version 0.4.0. Disable normal logging mqtt.

A bit simpler mqtt event handling.

• Wed, 12 Apr 2023 16:37:17 +0200
• by Michiel Broek <mbroek@mbse.eu> [Wed, 12 Apr 2023 16:37:17 +0200] rev 25
• A bit simpler mqtt event handling.

Reduced I2C master speed from 400 to 100 Khz. Hope to get power-on init for BMP280 more reliable. Added warnings for I2C devices that are missing. Some logmessages reduced to debug log messages. Added extra 10 mSec delays before read shunt voltage in the INA219 task. Removed and reduced log levels in the MQTT task. Show received data events. Remove WiFi total time debug logging, it's ok now.

• Wed, 12 Apr 2023 16:23:02 +0200
• by Michiel Broek <mbroek@mbse.eu> [Wed, 12 Apr 2023 16:23:02 +0200] rev 24
• Reduced I2C master speed from 400 to 100 Khz. Hope to get power-on init for BMP280 more reliable. Added warnings for I2C devices that are missing. Some logmessages reduced to debug log messages. Added extra 10 mSec delays before read shunt voltage in the INA219 task. Removed and reduced log levels in the MQTT task. Show received data events. Remove WiFi total time debug logging, it's ok now.

Shorter delays during wifi connect timeout. Some code cleanup in the main state table. Report WiFi TX power during init. Removed SSID from WIFI_State because it wasn't used.

• Tue, 11 Apr 2023 19:41:53 +0200
• by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Apr 2023 19:41:53 +0200] rev 23
• Shorter delays during wifi connect timeout. Some code cleanup in the main state table. Report WiFi TX power during init. Removed SSID from WIFI_State because it wasn't used.