Thu, 06 Apr 2023 20:53:06 +0200
Set the new measured deep sleep current consumption. This is half of the Wemos D1 system.
/* * Copyright (c) 2017 Brian Schwind <https://github.com/bschwind> * Copyright (c) 2019 Ruslan V. Uss <unclerus@gmail.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of the copyright holder nor the names of itscontributors * may be used to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** * @file tsl4531.h * @defgroup tsl4531 tsl4531 * @{ * * ESP-IDF driver for digital ambient light sensor TSL4531 * * Ported from esp-open-rtos * * Copyright (c) 2017 Brian Schwind <https://github.com/bschwind>\n * Copyright (c) 2019 Ruslan V. Uss <unclerus@gmail.com> * * BSD Licensed as described in the file LICENSE */ #ifndef __TSL4531_H__ #define __TSL4531_H__ #include <stdint.h> #include <stdbool.h> #include <i2cdev.h> #include <esp_err.h> #ifdef __cplusplus extern "C" { #endif #define TSL4531_I2C_ADDR 0x29 /** * Integration time */ typedef enum { TSL4531_INTEGRATION_400MS = 0x00, //!< Default TSL4531_INTEGRATION_200MS = 0x01, TSL4531_INTEGRATION_100MS = 0x02, } tsl4531_integration_time_t; /** * Part IDs */ typedef enum { TSL4531_PART_TSL45317 = 0x08, TSL4531_PART_TSL45313 = 0x09, TSL4531_PART_TSL45315 = 0x0A, TSL4531_PART_TSL45311 = 0x0B } tsl4531_part_id_t; /** * Device descriptor */ typedef struct { i2c_dev_t i2c_dev; tsl4531_integration_time_t integration_time; bool skip_power_save; tsl4531_part_id_t part_id; } tsl4531_t; /** * @brief Initialize device descriptor * * @param dev Device descriptor * @param port I2C port * @param sda_gpio SDA GPIO pin * @param scl_gpio SCL GPIO pin * @return `ESP_OK` on success */ esp_err_t tsl4531_init_desc(tsl4531_t *dev, i2c_port_t port, gpio_num_t sda_gpio, gpio_num_t scl_gpio); /** * @brief Free device descriptor * * @param dev Device descriptor * @return `ESP_OK` on success */ esp_err_t tsl4531_free_desc(tsl4531_t *dev); /** * @brief Initialize device * * @param dev Device descriptor * @return `ESP_OK` on success */ esp_err_t tsl4531_init(tsl4531_t *dev); /** * @brief Configure device * * @param dev Device descriptor * @param integration_time Integration time * @param skip_power_save PowerSave Mode. When true, the power save states are * skipped following a light integration cycle for shorter sampling rates * @return `ESP_OK` on success */ esp_err_t tsl4531_config(tsl4531_t *dev, tsl4531_integration_time_t integration_time, bool skip_power_save); /** * @brief Read conversion results in lux * * @param dev Device descriptor * @param[out] lux Conversion result in lux * @return `ESP_OK` on success */ esp_err_t tsl4531_read_lux(tsl4531_t *dev, uint16_t *lux); #ifdef __cplusplus } #endif /**@}*/ #endif // __TSL4531_H__