Mercurial > iotbalkon / file revision

/*
 * The MIT License (MIT)
 *
 * Copyright (c) 2018 Ruslan V. Uss <unclerus@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

/**
 * @file i2cdev.h
 * @defgroup i2cdev i2cdev
 * @{
 *
 * ESP-IDF I2C master thread-safe functions for communication with I2C slave
 *
 * Copyright (c) 2018 Ruslan V. Uss <unclerus@gmail.com>
 *
 * MIT Licensed as described in the file LICENSE
 */
#ifndef __I2CDEV_H__
#define __I2CDEV_H__

#include <driver/i2c.h>
#include <freertos/FreeRTOS.h>
#include <freertos/semphr.h>
#include <esp_err.h>
#include <esp_idf_lib_helpers.h>

#ifdef __cplusplus
extern "C" {
#endif

#if HELPER_TARGET_IS_ESP8266

#define I2CDEV_MAX_STRETCH_TIME 0xffffffff

#else

#include <soc/i2c_reg.h>
#if defined(I2C_TIME_OUT_VALUE_V)
#define I2CDEV_MAX_STRETCH_TIME I2C_TIME_OUT_VALUE_V
#elif defined(I2C_TIME_OUT_REG_V)
#define I2CDEV_MAX_STRETCH_TIME I2C_TIME_OUT_REG_V
#else
#define I2CDEV_MAX_STRETCH_TIME 0x00ffffff
#endif

#endif /* HELPER_TARGET_IS_ESP8266 */

/**
 * I2C device descriptor
 */
typedef struct
{
    i2c_port_t port;         //!< I2C port number
    i2c_config_t cfg;        //!< I2C driver configuration
    uint8_t addr;            //!< Unshifted address
    SemaphoreHandle_t mutex; //!< Device mutex
    uint32_t timeout_ticks;  /*!< HW I2C bus timeout (stretch time), in ticks. 80MHz APB clock
                                  ticks for ESP-IDF, CPU ticks for ESP8266.
                                  When this value is 0, I2CDEV_MAX_STRETCH_TIME will be used */
} i2c_dev_t;

/**
 * I2C transaction type
 */
typedef enum {
    I2C_DEV_WRITE = 0, /**< Write operation */
    I2C_DEV_READ       /**< Read operation */
} i2c_dev_type_t;

/**
 * @brief Init library
 *
 * The function must be called before any other
 * functions of this library.
 *
 * @return ESP_OK on success
 */
esp_err_t i2cdev_init();

/**
 * @brief Finish work with library
 *
 * Uninstall i2c drivers.
 *
 * @return ESP_OK on success
 */
esp_err_t i2cdev_done();

/**
 * @brief Create mutex for device descriptor
 *
 * This function does nothing if option CONFIG_I2CDEV_NOLOCK is enabled.
 *
 * @param dev Device descriptor
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_create_mutex(i2c_dev_t *dev);

/**
 * @brief Delete mutex for device descriptor
 *
 * This function does nothing if option CONFIG_I2CDEV_NOLOCK is enabled.
 *
 * @param dev Device descriptor
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_delete_mutex(i2c_dev_t *dev);

/**
 * @brief Take device mutex
 *
 * This function does nothing if option CONFIG_I2CDEV_NOLOCK is enabled.
 *
 * @param dev Device descriptor
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_take_mutex(i2c_dev_t *dev);

/**
 * @brief Give device mutex
 *
 * This function does nothing if option CONFIG_I2CDEV_NOLOCK is enabled.
 *
 * @param dev Device descriptor
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_give_mutex(i2c_dev_t *dev);

/**
 * @brief Check the availability of the device
 *
 * Issue an operation of \p operation_type to the I2C device then stops.
 *
 * @param dev Device descriptor
 * @param operation_type Operation type
 * @return ESP_OK if device is available
 */
esp_err_t i2c_dev_probe(const i2c_dev_t *dev, i2c_dev_type_t operation_type);

/**
 * @brief Read from slave device
 *
 * Issue a send operation of \p out_data register address, followed by reading \p in_size bytes
 * from slave into \p in_data .
 * Function is thread-safe.
 *
 * @param dev Device descriptor
 * @param out_data Pointer to data to send if non-null
 * @param out_size Size of data to send
 * @param[out] in_data Pointer to input data buffer
 * @param in_size Number of byte to read
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_read(const i2c_dev_t *dev, const void *out_data,
        size_t out_size, void *in_data, size_t in_size);

/**
 * @brief Write to slave device
 *
 * Write \p out_size bytes from \p out_data to slave into \p out_reg register address.
 * Function is thread-safe.
 *
 * @param dev Device descriptor
 * @param out_reg Pointer to register address to send if non-null
 * @param out_reg_size Size of register address
 * @param out_data Pointer to data to send
 * @param out_size Size of data to send
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_write(const i2c_dev_t *dev, const void *out_reg,
        size_t out_reg_size, const void *out_data, size_t out_size);

/**
 * @brief Read from register with an 8-bit address
 *
 * Shortcut to ::i2c_dev_read().
 *
 * @param dev Device descriptor
 * @param reg Register address
 * @param[out] in_data Pointer to input data buffer
 * @param in_size Number of byte to read
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_read_reg(const i2c_dev_t *dev, uint8_t reg,
        void *in_data, size_t in_size);

/**
 * @brief Write to register with an 8-bit address
 *
 * Shortcut to ::i2c_dev_write().
 *
 * @param dev Device descriptor
 * @param reg Register address
 * @param out_data Pointer to data to send
 * @param out_size Size of data to send
 * @return ESP_OK on success
 */
esp_err_t i2c_dev_write_reg(const i2c_dev_t *dev, uint8_t reg,
        const void *out_data, size_t out_size);

#define I2C_DEV_TAKE_MUTEX(dev) do { \
        esp_err_t __ = i2c_dev_take_mutex(dev); \
        if (__ != ESP_OK) return __;\
    } while (0)

#define I2C_DEV_GIVE_MUTEX(dev) do { \
        esp_err_t __ = i2c_dev_give_mutex(dev); \
        if (__ != ESP_OK) return __;\
    } while (0)

#define I2C_DEV_CHECK(dev, X) do { \
        esp_err_t ___ = X; \
        if (___ != ESP_OK) { \
            I2C_DEV_GIVE_MUTEX(dev); \
            return ___; \
        } \
    } while (0)

#define I2C_DEV_CHECK_LOGE(dev, X, msg, ...) do { \
        esp_err_t ___ = X; \
        if (___ != ESP_OK) { \
            I2C_DEV_GIVE_MUTEX(dev); \
            ESP_LOGE(TAG, msg, ## __VA_ARGS__); \
            return ___; \
        } \
    } while (0)

#ifdef __cplusplus
}
#endif

/**@}*/

#endif /* __I2CDEV_H__ */