changelog
- Thu, 13 Apr 2023 14:29:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 13 Apr 2023 14:29:41 +0200] rev 27
- Adjusted BMP280 default parameters for low power usage.
- Thu, 13 Apr 2023 12:08:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 13 Apr 2023 12:08:24 +0200] rev 26
- Version 0.4.0. Disable normal logging mqtt.
- Wed, 12 Apr 2023 16:37:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 12 Apr 2023 16:37:17 +0200] rev 25
- A bit simpler mqtt event handling.
- Wed, 12 Apr 2023 16:23:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 12 Apr 2023 16:23:02 +0200] rev 24
- Reduced I2C master speed from 400 to 100 Khz. Hope to get power-on init for BMP280 more reliable. Added warnings for I2C devices that are missing. Some logmessages reduced to debug log messages. Added extra 10 mSec delays before read shunt voltage in the INA219 task. Removed and reduced log levels in the MQTT task. Show received data events. Remove WiFi total time debug logging, it's ok now.
- Tue, 11 Apr 2023 19:41:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Apr 2023 19:41:53 +0200] rev 23
- Shorter delays during wifi connect timeout. Some code cleanup in the main state table. Report WiFi TX power during init. Removed SSID from WIFI_State because it wasn't used.
- Tue, 11 Apr 2023 11:11:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Apr 2023 11:11:13 +0200] rev 22
- Decreased WiFi transmit level to 13. Level 15 is unstable, skip 14 just to be sure. It seems to be the bad designed antenna circuit on the ESP32-C3 Lolin v2.1.0 board. The board also benefits from a ground plane connected to the shield of the USB connector. The final implementation needs an external antenna anyway so the onboard antenna will go away. In the meanwhile, the wifi task is now more robust. Also, in testing mode there is no battery alarm, only when building for production.
- Fri, 07 Apr 2023 14:31:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 07 Apr 2023 14:31:17 +0200] rev 21
- The esp-idf-lib apds9930 component is now working. In nvsio stop logging not updated values. Store gain and aglbit values in nvs.
- Thu, 06 Apr 2023 22:01:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 06 Apr 2023 22:01:08 +0200] rev 20
- Some extra time for the mqtt messages.
- Thu, 06 Apr 2023 20:53:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 06 Apr 2023 20:53:06 +0200] rev 19
- Set the new measured deep sleep current consumption. This is half of the Wemos D1 system.
- Thu, 06 Apr 2023 20:49:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 06 Apr 2023 20:49:52 +0200] rev 18
- Added nvsio utilities to make read/write to nvs namespace easier. Added variables for deep sleep to nvs namespace. In task_wifi, removed some init parameters that might add to instable wifi connect problems.