Wed, 01 May 2024 14:38:37 +0200
Added device_present() function to easy update device present from one-wire and simulator devices. When a simulator temperature sensor present is changed, the device table is changed too. Controlling simulator relays is now for each simulator. The simulator runs under the state machine. If something changed in the running simulator, all data is broadcasted over websocket. Completed the web editor.
714
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
1 | <?php |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
2 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
3 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
4 | function open_socket() |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
5 | { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
6 | $sock = socket_create(AF_INET, SOCK_STREAM, SOL_TCP); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
7 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
8 | if (!($sock === false)) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
9 | if (socket_connect($sock, "localhost", 6554)) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
10 | socket_set_option($sock, SOL_SOCKET, SO_RCVTIMEO, array('sec' => 15, 'usec' => 0)); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
11 | } else { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
12 | socket_close($sock); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
13 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
14 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
15 | return $sock; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
16 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
17 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
18 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
19 | /** |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
20 | * @param string $command to send to the server. |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
21 | * @return string with the complete reply from the |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
22 | * server. This can be a multiline reply. |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
23 | */ |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
24 | function send_cmd($command) |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
25 | { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
26 | $sock = open_socket(); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
27 | if ($sock == false) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
28 | return ""; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
29 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
30 | socket_write($sock, $command . "\r\n", 4096); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
31 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
32 | $answer = ""; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
33 | while (1) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
34 | $line = socket_read($sock, 4096); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
35 | if ($line === '') |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
36 | break; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
37 | $answer .= $line; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
38 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
39 | socket_close($sock); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
40 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
41 | return $answer; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
42 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
43 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
44 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
45 | function startsWith($haystack, $needle) |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
46 | { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
47 | return !strncmp($haystack, $needle, strlen($needle)); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
48 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
49 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
50 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
51 | $response = array( |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
52 | 'error' => false, |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
53 | 'msg' => 'Ok', |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
54 | ); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
55 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
56 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
57 | if (isset($_POST['update'])) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
58 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
59 | $cmd = "SIMULATOR PUT " . $_POST['uuid'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
60 | $cmd .= "NAME," . $_POST['name'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
61 | $cmd .= "VOLUME_AIR," . $_POST['volume_air'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
62 | $cmd .= "VOLUME_BEER," . $_POST['volume_beer'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
63 | $cmd .= "ROOM_TEMPERATURE," . $_POST['room_temperature'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
64 | $cmd .= "ROOM_HUMIDITY," . $_POST['room_humidity'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
65 | $cmd .= "AIR_PRESENT," . $_POST['air_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
66 | $cmd .= "BEER_PRESENT," . $_POST['beer_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
67 | $cmd .= "BEER_PRESENT2," . $_POST['beer_present2'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
68 | $cmd .= "CHILLER_PRESENT," . $_POST['chiller_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
69 | $cmd .= "COOLER_TEMP," . $_POST['cooler_temp'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
70 | $cmd .= "COOLER_TIME," . $_POST['cooler_time'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
71 | $cmd .= "COOLER_SIZE," . $_POST['cooler_size'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
72 | $cmd .= "COOLER_PRESENT," . $_POST['cooler_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
73 | $cmd .= "COOLER_POWER," . $_POST['cooler_power'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
74 | $cmd .= "HEATER_TEMP," . $_POST['heater_temp'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
75 | $cmd .= "HEATER_TIME," . $_POST['heater_time'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
76 | $cmd .= "HEATER_SIZE," . $_POST['heater_size'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
77 | $cmd .= "HEATER_PRESENT," . $_POST['heater_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
78 | $cmd .= "HEATER_POWER," . $_POST['heater_power'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
79 | $cmd .= "FAN_PRESENT," . $_POST['fan_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
80 | $cmd .= "FAN_POWER," . $_POST['fan_power'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
81 | $cmd .= "LIGHT_PRESENT," . $_POST['light_present'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
82 | $cmd .= "LIGHT_POWER," . $_POST['light_power'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
83 | $cmd .= "FRIGO_ISOLATION," . $_POST['frigo_isolation'] . "\r\n"; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
84 | $cmd .= "."; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
85 | $answer = send_cmd($cmd); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
86 | $arr = explode("\r\n", $answer); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
87 | if (! startsWith($arr[0], "219")) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
88 | $response['error'] = true; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
89 | $response['msg'] = $arr[0]; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
90 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
91 | exit(json_encode($response)); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
92 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
93 | } else if (isset($_POST['add'])) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
94 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
95 | $answer = send_cmd("SIMULATOR ADD " . $_POST['name']); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
96 | $arr = explode("\r\n", $answer); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
97 | if (! startsWith($arr[0], "211")) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
98 | $response['error'] = true; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
99 | $response['msg'] = $arr[0]; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
100 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
101 | exit(json_encode($response)); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
102 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
103 | } else if (isset($_POST['del'])) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
104 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
105 | $answer = send_cmd("SIMULATOR DEL " . $_POST['uuid']); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
106 | $arr = explode("\r\n", $answer); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
107 | if (! startsWith($arr[0], "211")) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
108 | $response['error'] = true; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
109 | $response['msg'] = $arr[0]; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
110 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
111 | exit(json_encode($response)); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
112 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
113 | } else { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
114 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
115 | $answer = send_cmd("SIMULATOR JSON"); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
116 | header("Content-type: application/json"); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
117 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
118 | $arr = explode("\r\n", $answer); |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
119 | if (startsWith($arr[0], "212")) { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
120 | echo $arr[1]; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
121 | } else { |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
122 | echo '{}'; |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
123 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
124 | } |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
125 | |
24749c296a50
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
126 | ?> |