--- a/www-thermferm/devices.php Thu Apr 25 14:26:47 2024 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,565 +0,0 @@
-<?php
-/*****************************************************************************
- * Copyright (C) 2014-2015
- *
- * Michiel Broek <mbroek at mbse dot eu>
- *
- * This file is part of ThermFerm
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * ThermFerm is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with ThermFerm; see the file COPYING. If not, write to the Free
- * Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *****************************************************************************/
-
-require_once('utilities.php');
-
-/*
- * $arr contains the complete reply of the LIST BUS command
- */
-$answer = send_cmd("DEVICE LIST");
-$arr = explode("\r\n", $answer);
-
-
-if (isset($_GET['action'])) {
- switch ($_GET['action']) {
- case 'edit': device_edit();
- break;
- default: break;
- }
-} elseif (isset($_POST['action'])) {
- switch ($_POST['action']) {
- case 'testdata': testdata();
- break;
- default: break;
- }
-} else {
- device_list();
-}
-
-exit;
-
-/****************************************************************************
- *
- */
-
-
-/*
- * Device add
- *
- * @param string $_POST['Type'] The device type
- * @param string $_POST['key'] The pressed key
- */
-function device_add() {
- if ($_POST['key'] == 'Add')
- send_cmd("DEVICE ADD ".$_POST['Type']);
- unset($_POST['UUID']);
- unset($_POST['Name']);
- unset($_POST['key']);
- unset($_POST['command']);
- load('devices.php');
-}
-
-
-
-/*
- * Device update
- *
- * @param string $_POST['UUID'] The device UUID
- * @param string $_POST['Type'] The device Type
- * @param string $_POST['Direction'] The device IO Direction
- * @param string $_POST['Value'] The device value
- * @param string $_POST['Offset'] The device offset
- * @param string $_POST['Present'] The device Present state
- * @param string $_POST['Address'] The device Address
- * @param string $_POST['Subdevice'] The device Subaddress
- * @param string $_POST['Gpiopin'] The device GPIO pin
- * @param string $_POST['Description'] The device Description
- * @param string $_POST['Comment'] The device Comment
- * @param string $_POST['key'] The button pressed.
- */
-function device_update() {
- /*
- * Build the update command
- */
- if ($_POST['key'] == 'Delete') {
- send_cmd("DEVICE DEL ".$_POST['UUID']);
- }
-
- if ($_POST['key'] == 'Save') {
- $cmd = array("DEVICE PUT ".$_POST['UUID']);
- $cmd[] = "TYPE,".$_POST['Type'];
- $cmd[] = "DIRECTION,".$_POST['Direction'];
- $cmd[] = "VALUE,".$_POST['Value'];
- $cmd[] = "OFFSET,".$_POST['Offset'];
- $cmd[] = "PRESENT,".$_POST['Present'];
- $cmd[] = "ADDRESS,".$_POST['Address'];
- $cmd[] = "SUBDEVICE,".$_POST['Subdevice'];
- $cmd[] = "GPIOPIN,".$_POST['Gpiopin'];
- $cmd[] = "DESCRIPTION,".$_POST['Description'];
- $cmd[] = "COMMENT,".$_POST['Comment'];
- $cmd[] = ".";
- send_array($cmd);
- }
-
- unset($_POST['UUID']);
- unset($_POST['Type']);
- unset($_POST['Direction']);
- unset($_POST['Value']);
- unset($_POST['Present']);
- unset($_POST['Address']);
- unset($_POST['Subdevice']);
- unset($_POST['Gpiopin']);
- unset($_POST['Description']);
- unset($_POST['Comment']);
- unset($_POST['key']);
- unset($_POST['command']);
- load('devices.php');
-}
-
-
-
-/*
- * Test input of a modified or new device.
- *
- * @param string $_POST['UUID'] Unique record UUID
- * @param string $_POST['Type'] Device Type
- * @param string $_POST['Direction']
- * @param string $_POST['Value']
- * @param string $_POST['Offset']
- * @param string $_POST['Present']
- * @param string $_POST['Address']
- * @param string $_POST['Subdevice']
- * @param string $_POST['Gpiopin']
- * @param string $_POST['Description']
- * @param string $_POST['Comment']
- * @param string $_POST['key'] Key choice, Save or Cancel
- * @param string $_POST['command'] Command used, 'add' or 'update'
- *
- * Return: 0 = Ok
- * 1 = Missing data
- * 2 = Address field too short
- * 3 = Address/Subdevice already in use
- * 4 = Description field too short
- * 5 = Comment field too short
- * 99 = Cancel key
- */
-function test_thedata() {
-
- global $arr;
-
- if (isset($_POST['UUID']) && isset($_POST['Type']) && isset($_POST['Direction']) && isset($_POST['Value']) && isset($_POST['Offset']) &&
- isset($_POST['Present']) && isset($_POST['Address']) && isset($_POST['Subdevice']) && isset($_POST['Gpiopin']) &&
- isset($_POST['Description']) && isset($_POST['Comment']) && isset($_POST['key']) && isset($_POST['command'])) {
-
- if ($_POST['key'] == 'Cancel')
- return 99;
-
- if (strlen($_POST['Address']) < 2)
- return 2;
-
- if (startsWith($arr[0], "212")) {
- $j = 1;
- while (1) {
- if (strcmp($arr[$j], ".") == 0)
- break;
- $f = explode(",", $arr[$j]);
- if (strcmp($f[0], $_POST['UUID']) && ($f[1] == $_POST['Address']) && ($f[2] == $_POST['Subdevice'])) {
- return 3;
- }
- $j++;
- }
- }
-
- if (strlen($_POST['Description']) < 2)
- return 4;
-
- if (strlen($_POST['Comment']) < 2)
- return 5;
-
- } else {
- return 1;
- }
-
- return 0;
-}
-
-
-
-/*
- * Test result from edit screen and do next action
- */
-function testdata() {
-
- $result = test_thedata();
- $error = '';
-
- switch ($result) {
- case 0: if ($_POST['command'] == 'add') {
- device_add();
- return;
- } else if ($_POST['command'] == 'update') {
- device_update();
- return;
- }
- break;
- case 1: $error = 'Missing data';
- break;
- case 2: $error = 'The Address is too short';
- break;
- case 3: $error = 'The Address + Subdevice is already in use, choose another one';
- break;
- case 4: $error = 'The Description is too short';
- break;
- case 5: $error = 'The Comment is too short';
- break;
- case 99:
- load('devices.php');
- break;
- }
-
- if ($_POST['command'] == 'add') {
- $heading = 'ThermFerm - Add Device';
- } else {
- $heading = 'ThermFerm - Edit Device';
- }
-
- edit_screen($_POST['UUID'], $_POST['command'], $heading, $error);
-}
-
-
-
-/*
- * Unit edit screen. Used by unit_edit(), unit_add() and testdata()
- *
- * @param string $UUID The record UUID (fixed).
- * @param string $command 'add' or 'update'
- * @param string $heading Page heading title.
- * @Param string $error_message Blank or previous error.
- */
-function edit_screen($UUID, $command, $heading, $error_message) {
-
- $answer = send_cmd("DEVICE GET ".$UUID);
- $reply = explode("\r\n", $answer);
-
- $outstr = build_header($heading);
- $outstr .= ' <div id="errors">'.PHP_EOL;
- $outstr .= ' '.$error_message.PHP_EOL;
- $outstr .= ' </div> <!-- errors -->'.PHP_EOL;
- $outstr .= ' <div id="etable">'.PHP_EOL;
- $outstr .= ' <form method="POST" action="devices.php">'.PHP_EOL;
- $outstr .= ' <table class="editor">'.PHP_EOL;
-
- if (startsWith($reply[0], "213")) {
- $j = 1;
- while (1) {
- if (strcmp($reply[$j], ".") == 0)
- break;
- $f = explode(",", $reply[$j]);
- if ($f[0] == "TYPE") {
- $type = $f[1];
- /*
- * Only allow certain types to edit. Auto detected hardware cannot be changed.
- */
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Device Type</td>'.PHP_EOL;
- if (($type == "W1") || ($type == "GPIO") || ($type == "SIM"))
- $outstr .= ' <td class="editfield"><input type="hidden" name="Type" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- else
- $outstr .= ' <td class="editfield"><input type="text" name="Type" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "ADDRESS") {
- $address = $f[1];
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Address</td>'.PHP_EOL;
- if (($type == "W1") || ($type == "GPIO"))
- $outstr .= ' <td class="editfield"><input type="hidden" name="Address" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- else
- $outstr .= ' <td class="editfield"><input type="text" name="Address" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "DIRECTION") {
- $direction = $f[1];
- /*
- * Only devices that cannot auto detect can be changed.
- */
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">IO Direction and mode</td>'.PHP_EOL;
- if ($type == "W1") {
- if ((strncmp($address, "29", 2) == 0) || (strncmp($address, "3a", 2) == 0)) {
- $outstr .= ' <td class="editfield"><select name="Direction">'.PHP_EOL;
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- $se = ($f[1] == "IN_BIN")?" selected":"";
- $outstr .= ' <option value="IN_BIN"'.$se.'>Binary input</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_BIN")?" selected":"";
- $outstr .= ' <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_PWM")?" selected":"";
- $outstr .= ' <option value="OUT_PWM"'.$se.'>PWM output</option>'.PHP_EOL;
- $outstr .= ' </select></td>'.PHP_EOL;
- } else {
- $outstr .= ' <td class="editfield"><input type="hidden" name="Direction" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- }
- } else {
- $outstr .= ' <td class="editfield"><select name="Direction">'.PHP_EOL;
- if ($type == "GPIO") {
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- $se = ($f[1] == "IN_BIN")?" selected":"";
- $outstr .= ' <option value="IN_BIN"'.$se.'>Binary input</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_BIN")?" selected":"";
- $outstr .= ' <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_PWM")?" selected":"";
- $outstr .= ' <option value="OUT_PWM"'.$se.'>PWM output</option>'.PHP_EOL;
- }
- if ($type == "RC433") {
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_BIN")?" selected":"";
- $outstr .= ' <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
- }
- if ($type == "DHT") {
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- $se = ($f[1] == "IN_ANALOG")?" selected":"";
- $outstr .= ' <option value="IN_ANALOG"'.$se.'>Analog input</option>'.PHP_EOL;
- }
- if ($type == "I2C") {
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- }
- if ($type == "SPI") {
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- }
- if ($type == "SIM") {
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- $se = ($f[1] == "IN_BIN")?" selected":"";
- $outstr .= ' <option value="IN_BIN"'.$se.'>Binary input</option>'.PHP_EOL;
- $se = ($f[1] == "IN_ANALOG")?" selected":"";
- $outstr .= ' <option value="IN_ANALOG"'.$se.'>Analog input</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_BIN")?" selected":"";
- $outstr .= ' <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
- $se = ($f[1] == "OUT_ANALOG")?" selected":"";
- $outstr .= ' <option value="OUT_ANALOG"'.$se.'>Analog output</option>'.PHP_EOL;
- }
- $outstr .= ' </select></td>'.PHP_EOL;
- }
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "VALUE") {
- /*
- * Only output can be changed
- */
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Value</td>'.PHP_EOL;
- if (($direction == "OUT_BIN") || ($direction == "OUT_ANALOG") || ($direction == "OUT_PWM"))
- $outstr .= ' <td class="editfield"><input type="text" name="Value" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
- else
- $outstr .= ' <td class="editfield"><input type="hidden" name="Value" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "OFFSET") {
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Offset</td>'.PHP_EOL;
- if ($direction == "IN_ANALOG")
- $outstr .= ' <td class="editfield"><input type="text" name="Offset" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
- else
- $outstr .= ' <td class="editfield"><input type="hidden" name="Offset" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "PRESENT") {
- /*
- * Only devices that cannot auto detect can be changed.
- */
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Device Present</td>'.PHP_EOL;
- if (($type == "W1") || ($type == "GPIO"))
- $outstr .= ' <td class="editfield"><input type="hidden" name="Present" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- else {
- $outstr .= ' <td class="editfield"><select name="Present">'.PHP_EOL;
- $se = ($f[1] == "UNDEF")?" selected":"";
- $outstr .= ' <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
- $se = ($f[1] == "NO")?" selected":"";
- $outstr .= ' <option value="NO"'.$se.'>Not present</option>'.PHP_EOL;
- $se = ($f[1] == "YES")?" selected":"";
- $outstr .= ' <option value="YES"'.$se.'>Present and Ok</option>'.PHP_EOL;
- $se = ($f[1] == "ERROR")?" selected":"";
- $outstr .= ' <option value="ERROR"'.$se.'>Present and Error</option>'.PHP_EOL;
- $outstr .= ' </select></td>'.PHP_EOL;
- }
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "SUBDEVICE") {
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Subdevice</td>'.PHP_EOL;
- if (($type == "W1") || ($type == "GPIO"))
- $outstr .= ' <td class="editfield"><input type="hidden" name="Subdevice" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
- else
- $outstr .= ' <td class="editfield"><input type="text" name="Subdevice" size="5" value="'.$f[1].'"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "GPIOPIN") {
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">GPIO pin</td>'.PHP_EOL;
- $outstr .= ' <td class="editfield"><input type="text" name="Gpiopin" size="5" value="'.$f[1].'"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "DESCRIPTION") {
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Description</td>'.PHP_EOL;
- $outstr .= ' <td class="editfield"><input type="text" name="Description" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- if ($f[0] == "COMMENT") {
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Comment</td>'.PHP_EOL;
- $outstr .= ' <td class="editfield"><input type="text" name="Comment" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- }
- $j++;
- }
- }
-
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname"><input type="submit" value="Save" name="key"></td>'.PHP_EOL;
- $outstr .= ' <td class="editfield"><input type="submit" value="Cancel" name="key">';
- $outstr .= '<input type="submit" value="Delete" name="key" style="margin-left: 100px;">';
- $outstr .= '<input type="hidden" value="testdata" name="action">';
- $outstr .= '<input type="hidden" value="'.$command.'" name="command">';
- $outstr .= '<input type="hidden" value="'.$UUID.'" name="UUID"></td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- $outstr .= ' </table>'.PHP_EOL;
- $outstr .= ' </form>'.PHP_EOL;
- $outstr .= ' </div> <!-- etable -->'.PHP_EOL;
- $outstr .= ' <script type="text/javascript">'.PHP_EOL;
- $outstr .= ' $(document).ready(function () {'.PHP_EOL;
- $outstr .= ' $("#maintenance").jqxButton({ width: 150, height: 25, theme: \'ui-redmond\' });'.PHP_EOL;
- $outstr .= ' });'.PHP_EOL;
- $outstr .= ' </script>'.PHP_EOL;
- $outstr .= build_footer();
- echo $outstr;
-}
-
-
-
-/*
- * Edit a Device. Fetches the record data and shows the edit screen.
- *
- * @param string $_GET['action'] Must be 'edit'.
- * @param string $_GET['UUID'] The UUID of the Unit.
- */
-function device_edit() {
- if ($_GET['action'] == 'edit') {
- edit_screen($_GET['UUID'], 'update', 'ThermFerm - Edit Device', '');
- return;
- } else {
- load('devices.php');
- }
-}
-
-
-
-/*
- * @link edit device
- * @link add device
- */
-function device_list() {
- global $arr;
-
- $outstr = build_header("ThermFerm - Devices Setup");
- $outstr .= ' <div id="errors">'.PHP_EOL;
- $outstr .= ' </div> <!-- errors -->'.PHP_EOL;
- $outstr .= ' <div id="etable">'.PHP_EOL;
- $outstr .= ' <table class="setup">'.PHP_EOL;
- $outstr .= ' <tr class="trhead">'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 300px;">UUID</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 120px;">Address</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 25px;">Sub</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 25px;">Ref</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 200px;">Cmt</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 70px;">Dir</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 70px;">Val</td>'.PHP_EOL;
- $outstr .= ' <td class="setup" style="width: 35px;">Edit</td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
-
- if (startsWith($arr[0], "212")) {
- $j = 1;
- while (1) {
- if (strcmp($arr[$j], ".") == 0)
- break;
- $f = explode(",", $arr[$j]);
- $outstr .= ' <tr class="setup">'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[0].'</td>'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[1].'</td>'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[2].'</td>'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[3].'</td>'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[4].'</td>'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[5].'</td>'.PHP_EOL;
- $outstr .= ' <td class="setup">'.$f[6].'</td>'.PHP_EOL;
- if ($f[3] == 0)
- $outstr .= ' <td class="setup"><a href="devices.php?action=edit&UUID='.$f[0].'">Edit</a></td>'.PHP_EOL;
- else
- $outstr .= ' <td class="setup">Busy</td>'.PHP_EOL;
- $outstr .= ' </tr>'.PHP_EOL;
- $j++;
- }
- }
-
- $outstr .= ' </table>'.PHP_EOL;
- $outstr .= ' </div> <!-- etable -->'.PHP_EOL;
-
- $outstr .= ' <div id="atable">'.PHP_EOL;
- $outstr .= ' <form method="POST" action="devices.php">'.PHP_EOL;
- $outstr .= ' <table class="editor">'.PHP_EOL;
- $outstr .= ' <tr class="trhead"><td colspan="3">Add new Device</td></tr>'.PHP_EOL;
- $outstr .= ' <tr class="editor">'.PHP_EOL;
- $outstr .= ' <td class="editname">Select Device type</td>'.PHP_EOL;
- $outstr .= ' <td class="editfield">'.PHP_EOL;
- $outstr .= ' <select name="Type">'.PHP_EOL;
- $outstr .= ' <option value="NA">Not Available</option>'.PHP_EOL;
- $outstr .= ' <option value="RC433">433 Mhz Radio Controller</option>'.PHP_EOL;
- $outstr .= ' <option value="DHT">DHTnn type sensor</option>'.PHP_EOL;
- $outstr .= ' <option value="I2C">I2C bus device</option>'.PHP_EOL;
- $outstr .= ' <option value="SPI">SPI bus device</option>'.PHP_EOL;
- $outstr .= ' </select>'.PHP_EOL;
- $outstr .= ' </td>'.PHP_EOL;
- $outstr .= ' <td class="editsub"><input type="submit" value="Add" name="key"></td>'.PHP_EOL;
- $outstr .= '<input type="hidden" value="testdata" name="action">';
- $outstr .= '<input type="hidden" value="add" name="command">';
- $outstr .= '<input type="hidden" value="00000000-0000-0000-0000-000000000000" name="UUID">';
- $outstr .= '<input type="hidden" value="UNDEF" name="Direction">';
- $outstr .= '<input type="hidden" value="0" name="Value">';
- $outstr .= '<input type="hidden" value="0" name="Offset">';
- $outstr .= '<input type="hidden" value="UNDEF" name="Present">';
- $outstr .= '<input type="hidden" value="address unknown" name="Address">';
- $outstr .= '<input type="hidden" value="0" name="Subdevice">';
- $outstr .= '<input type="hidden" value="-1" name="Gpiopin">';
- $outstr .= '<input type="hidden" value="Describe me" name="Description">';
- $outstr .= '<input type="hidden" value="Comment me" name="Comment">';
- $outstr .= ' </tr>'.PHP_EOL;
- $outstr .= ' </table>'.PHP_EOL;
- $outstr .= ' </form>'.PHP_EOL;
- $outstr .= ' </div> <!-- atable -->'.PHP_EOL;
-
- $outstr .= ' <script type="text/javascript">'.PHP_EOL;
- $outstr .= ' $(document).ready(function () {'.PHP_EOL;
- $outstr .= ' $("#maintenance").jqxButton({ width: 150, height: 25, theme: \'ui-redmond\' });'.PHP_EOL;
- $outstr .= ' });'.PHP_EOL;
- $outstr .= ' </script>'.PHP_EOL;
- $outstr .= build_footer();
-
- echo $outstr;
-}
-