Mercurial > mbsePi-apps / file revision

<?php
/*****************************************************************************
 * Copyright (C) 2014-2015
 *   
 * Michiel Broek <mbroek at mbse dot eu>
 *
 * This file is part of ThermFerm
 *
 * This is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * ThermFerm is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with ThermFerm; see the file COPYING.  If not, write to the Free
 * Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
 *****************************************************************************/

require_once('utilities.php');

/*
 * $arr contains the complete reply of the LIST BUS command
 */
$answer = send_cmd("DEVICE LIST");
$arr = explode("\r\n", $answer);


if (isset($_GET['action'])) {
    switch ($_GET['action']) {
	case 'edit':            device_edit();
				break;
	default:                break;
    }
} elseif (isset($_POST['action'])) {
    switch ($_POST['action']) {
	case 'testdata':        testdata();
				break;
	default:                break;
    }
} else {
    device_list();
}

exit;

/****************************************************************************
 *
 */


/*
 * Device add
 *
 * @param string $_POST['Type'] The device type
 * @param string $_POST['key'] The pressed key
 */
function device_add() {
    if ($_POST['key'] == 'Add')
	send_cmd("DEVICE ADD ".$_POST['Type']);                                    
    unset($_POST['UUID']);
    unset($_POST['Name']);
    unset($_POST['key']);
    unset($_POST['command']);
    load('devices.php');
}



/*
 * Device update
 *
 * @param string $_POST['UUID'] The device UUID
 * @param string $_POST['Type'] The device Type
 * @param string $_POST['Direction'] The device IO Direction
 * @param string $_POST['Value'] The device value
 * @param string $_POST['Offset'] The device offset
 * @param string $_POST['Present'] The device Present state
 * @param string $_POST['Address'] The device Address
 * @param string $_POST['Subdevice'] The device Subaddress
 * @param string $_POST['Gpiopin'] The device GPIO pin
 * @param string $_POST['Description'] The device Description
 * @param string $_POST['Comment'] The device Comment
 * @param string $_POST['key'] The button pressed.
 */
function device_update() {
    /*
     * Build the update command
     */
    if ($_POST['key'] == 'Delete') {
	send_cmd("DEVICE DEL ".$_POST['UUID']);
    }

    if ($_POST['key'] == 'Save') {
	$cmd = array("DEVICE PUT ".$_POST['UUID']);
	$cmd[] = "TYPE,".$_POST['Type'];
	$cmd[] = "DIRECTION,".$_POST['Direction'];
	$cmd[] = "VALUE,".$_POST['Value'];
	$cmd[] = "OFFSET,".$_POST['Offset'];
	$cmd[] = "PRESENT,".$_POST['Present'];
	$cmd[] = "ADDRESS,".$_POST['Address'];
	$cmd[] = "SUBDEVICE,".$_POST['Subdevice'];
	$cmd[] = "GPIOPIN,".$_POST['Gpiopin'];
	$cmd[] = "DESCRIPTION,".$_POST['Description'];
	$cmd[] = "COMMENT,".$_POST['Comment'];
	$cmd[] = ".";
	send_array($cmd);
    }

    unset($_POST['UUID']);
    unset($_POST['Type']);
    unset($_POST['Direction']);
    unset($_POST['Value']);
    unset($_POST['Present']);
    unset($_POST['Address']);
    unset($_POST['Subdevice']);
    unset($_POST['Gpiopin']);
    unset($_POST['Description']);
    unset($_POST['Comment']);
    unset($_POST['key']);
    unset($_POST['command']);
    load('devices.php');
}



/*
 * Test input of a modified or new device.
 *
 * @param string $_POST['UUID'] Unique record UUID
 * @param string $_POST['Type'] Device Type
 * @param string $_POST['Direction']
 * @param string $_POST['Value']
 * @param string $_POST['Offset']
 * @param string $_POST['Present']
 * @param string $_POST['Address']
 * @param string $_POST['Subdevice']
 * @param string $_POST['Gpiopin']
 * @param string $_POST['Description']
 * @param string $_POST['Comment']
 * @param string $_POST['key'] Key choice, Save or Cancel
 * @param string $_POST['command'] Command used, 'add' or 'update'
 *
 * Return: 0 = Ok
 *         1 = Missing data
 *         2 = Address field too short
 *         3 = Address/Subdevice already in use
 *         4 = Description field too short
 *         5 = Comment field too short
 *        99 = Cancel key
 */
function test_thedata() {

    global $arr;

    if (isset($_POST['UUID']) && isset($_POST['Type']) && isset($_POST['Direction']) && isset($_POST['Value']) && isset($_POST['Offset']) &&
	isset($_POST['Present']) && isset($_POST['Address']) && isset($_POST['Subdevice']) && isset($_POST['Gpiopin']) &&
	isset($_POST['Description']) && isset($_POST['Comment']) && isset($_POST['key']) && isset($_POST['command'])) {

	if ($_POST['key'] == 'Cancel')
	    return 99;

	if (strlen($_POST['Address']) < 2)
	    return 2;

	if (startsWith($arr[0], "212")) {
	    $j = 1;
	    while (1) {
		if (strcmp($arr[$j], ".") == 0)
		    break;
		$f = explode(",", $arr[$j]);
		if (strcmp($f[0], $_POST['UUID']) && ($f[1] == $_POST['Address']) && ($f[2] == $_POST['Subdevice'])) {
		    return 3;
		}
		$j++;
	    }
	}

	if (strlen($_POST['Description']) < 2)
	    return 4;

	if (strlen($_POST['Comment']) < 2)
	    return 5;

    } else {
	return 1;
    }

    return 0;
}



/*
 * Test result from edit screen and do next action
 */
function testdata() {

    $result = test_thedata();
    $error = '';

    switch ($result) {
	case 0: if ($_POST['command'] == 'add') {
		    device_add();
		    return;
		} else if ($_POST['command'] == 'update') {
		    device_update();
		    return;
		}
		break;
	case 1: $error = 'Missing data';
		break;
	case 2: $error = 'The Address is too short';
		break;
	case 3: $error = 'The Address + Subdevice is already in use, choose another one';
		break;
	case 4:	$error = 'The Description is too short';
		break;
	case 5:	$error = 'The Comment is too short';
		break;
	case 99:        
		load('devices.php');
		break;
    }

    if ($_POST['command'] == 'add') {
	$heading = 'ThermFerm - Add Device';
    } else {
	$heading = 'ThermFerm - Edit Device';
    }

    edit_screen($_POST['UUID'], $_POST['command'], $heading, $error);
}



/*
 * Unit edit screen. Used by unit_edit(), unit_add() and testdata()
 *
 * @param string $UUID The record UUID (fixed).
 * @param string $command 'add' or 'update'
 * @param string $heading Page heading title.
 * @Param string $error_message Blank or previous error.
 */
function edit_screen($UUID, $command, $heading, $error_message) {

    $answer = send_cmd("DEVICE GET ".$UUID);
    $reply = explode("\r\n", $answer);

    $outstr  = build_header($heading);
    $outstr .= '    <div id="errors">'.PHP_EOL;
    $outstr .= '     '.$error_message.PHP_EOL;
    $outstr .= '    </div> <!-- errors -->'.PHP_EOL;
    $outstr .= '    <div id="etable">'.PHP_EOL;
    $outstr .= '     <form method="POST" action="devices.php">'.PHP_EOL;
    $outstr .= '      <table class="editor">'.PHP_EOL;

    if (startsWith($reply[0], "213")) {
	$j = 1;
	while (1) {
	    if (strcmp($reply[$j], ".") == 0)
		break;
	    $f = explode(",", $reply[$j]);
	    if ($f[0] == "TYPE") {
		$type = $f[1];
		/*
		 * Only allow certain types to edit. Auto detected hardware cannot be changed.
		 */
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Device Type</td>'.PHP_EOL;
		if (($type == "W1") || ($type == "GPIO") || ($type == "SIM"))
		    $outstr .= '        <td class="editfield"><input type="hidden" name="Type" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		else
		    $outstr .= '        <td class="editfield"><input type="text" name="Type" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "ADDRESS") {
		$address = $f[1];
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Address</td>'.PHP_EOL;
		if (($type == "W1") || ($type == "GPIO"))
		    $outstr .= '        <td class="editfield"><input type="hidden" name="Address" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		else
		    $outstr .= '        <td class="editfield"><input type="text" name="Address" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "DIRECTION") {
		$direction = $f[1];
		/*
		 * Only devices that cannot auto detect can be changed.
		 */
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">IO Direction and mode</td>'.PHP_EOL;
		if ($type == "W1") {
		    if ((strncmp($address, "29", 2) == 0) || (strncmp($address, "3a", 2) == 0)) {
			$outstr .= '        <td class="editfield"><select name="Direction">'.PHP_EOL;
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
			$se = ($f[1] == "IN_BIN")?" selected":"";
			$outstr .= '         <option value="IN_BIN"'.$se.'>Binary input</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_BIN")?" selected":"";
			$outstr .= '         <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_PWM")?" selected":"";
			$outstr .= '         <option value="OUT_PWM"'.$se.'>PWM output</option>'.PHP_EOL;
			$outstr .= '        </select></td>'.PHP_EOL;
		    } else {
			$outstr .= '        <td class="editfield"><input type="hidden" name="Direction" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		    }
		} else {
		    $outstr .= '        <td class="editfield"><select name="Direction">'.PHP_EOL;
		    if ($type == "GPIO") {
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
			$se = ($f[1] == "IN_BIN")?" selected":"";
			$outstr .= '         <option value="IN_BIN"'.$se.'>Binary input</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_BIN")?" selected":"";
			$outstr .= '         <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_PWM")?" selected":"";
			$outstr .= '         <option value="OUT_PWM"'.$se.'>PWM output</option>'.PHP_EOL;
		    }
		    if ($type == "RC433") {
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_BIN")?" selected":"";
			$outstr .= '         <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
		    }
		    if ($type == "DHT") {
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
			$se = ($f[1] == "IN_ANALOG")?" selected":"";
			$outstr .= '         <option value="IN_ANALOG"'.$se.'>Analog input</option>'.PHP_EOL;
		    }
		    if ($type == "I2C") {
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
		    }
		    if ($type == "SPI") {
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
		    }
		    if ($type == "SIM") {
			$se = ($f[1] == "UNDEF")?" selected":"";
			$outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
			$se = ($f[1] == "IN_BIN")?" selected":"";
			$outstr .= '         <option value="IN_BIN"'.$se.'>Binary input</option>'.PHP_EOL;
			$se = ($f[1] == "IN_ANALOG")?" selected":"";
			$outstr .= '         <option value="IN_ANALOG"'.$se.'>Analog input</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_BIN")?" selected":"";
			$outstr .= '         <option value="OUT_BIN"'.$se.'>Binary output</option>'.PHP_EOL;
			$se = ($f[1] == "OUT_ANALOG")?" selected":"";
			$outstr .= '         <option value="OUT_ANALOG"'.$se.'>Analog output</option>'.PHP_EOL;
		    }
		    $outstr .= '        </select></td>'.PHP_EOL;
		}
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "VALUE") {
		/*
		 * Only output can be changed
		 */
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Value</td>'.PHP_EOL;
		if (($direction == "OUT_BIN") || ($direction == "OUT_ANALOG") || ($direction == "OUT_PWM"))
		    $outstr .= '        <td class="editfield"><input type="text" name="Value" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
		else
		    $outstr .= '        <td class="editfield"><input type="hidden" name="Value" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "OFFSET") {
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Offset</td>'.PHP_EOL;
		if ($direction == "IN_ANALOG")
		    $outstr .= '        <td class="editfield"><input type="text" name="Offset" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
		else
		    $outstr .= '        <td class="editfield"><input type="hidden" name="Offset" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "PRESENT") {
		/*
		 * Only devices that cannot auto detect can be changed.
		 */
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Device Present</td>'.PHP_EOL;
		if (($type == "W1") || ($type == "GPIO"))
		    $outstr .= '        <td class="editfield"><input type="hidden" name="Present" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		else {
		    $outstr .= '        <td class="editfield"><select name="Present">'.PHP_EOL;
		    $se = ($f[1] == "UNDEF")?" selected":"";
		    $outstr .= '         <option value="UNDEF"'.$se.'>Undefined</option>'.PHP_EOL;
		    $se = ($f[1] == "NO")?" selected":"";
		    $outstr .= '         <option value="NO"'.$se.'>Not present</option>'.PHP_EOL;
		    $se = ($f[1] == "YES")?" selected":"";
		    $outstr .= '         <option value="YES"'.$se.'>Present and Ok</option>'.PHP_EOL;
		    $se = ($f[1] == "ERROR")?" selected":"";
		    $outstr .= '         <option value="ERROR"'.$se.'>Present and Error</option>'.PHP_EOL;
		    $outstr .= '        </select></td>'.PHP_EOL;
		}
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "SUBDEVICE") {
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Subdevice</td>'.PHP_EOL;
		if (($type == "W1") || ($type == "GPIO"))
		    $outstr .= '        <td class="editfield"><input type="hidden" name="Subdevice" value="'.$f[1].'">'.$f[1].'</td>'.PHP_EOL;
		else
		    $outstr .= '        <td class="editfield"><input type="text" name="Subdevice" size="5" value="'.$f[1].'"></td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "GPIOPIN") {
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">GPIO pin</td>'.PHP_EOL;
		$outstr .= '        <td class="editfield"><input type="text" name="Gpiopin" size="5" value="'.$f[1].'"></td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;                  
	    }
	    if ($f[0] == "DESCRIPTION") {
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Description</td>'.PHP_EOL;
		$outstr .= '        <td class="editfield"><input type="text" name="Description" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	    }
	    if ($f[0] == "COMMENT") {
		$outstr .= '       <tr class="editor">'.PHP_EOL;
		$outstr .= '        <td class="editname">Comment</td>'.PHP_EOL;
		$outstr .= '        <td class="editfield"><input type="text" name="Comment" size="50" value="'.$f[1].'"></td>'.PHP_EOL;
		$outstr .= '       </tr>'.PHP_EOL;
	     }
	    $j++;
	}
    }

    $outstr .= '       <tr class="editor">'.PHP_EOL;
    $outstr .= '        <td class="editname"><input type="submit" value="Save" name="key"></td>'.PHP_EOL;
    $outstr .= '        <td class="editfield"><input type="submit" value="Cancel" name="key">';
    $outstr .= '<input type="submit" value="Delete" name="key" style="margin-left: 100px;">';
    $outstr .= '<input type="hidden" value="testdata" name="action">';
    $outstr .= '<input type="hidden" value="'.$command.'" name="command">';
    $outstr .= '<input type="hidden" value="'.$UUID.'" name="UUID"></td>'.PHP_EOL;
    $outstr .= '       </tr>'.PHP_EOL;
    $outstr .= '      </table>'.PHP_EOL;
    $outstr .= '     </form>'.PHP_EOL;
    $outstr .= '    </div> <!-- etable -->'.PHP_EOL;
    $outstr .= '    <script type="text/javascript">'.PHP_EOL;
    $outstr .= '     $(document).ready(function () {'.PHP_EOL;
    $outstr .= '      $("#maintenance").jqxButton({ width: 150, height: 25, theme: \'ui-redmond\' });'.PHP_EOL;
    $outstr .= '     });'.PHP_EOL;
    $outstr .= '    </script>'.PHP_EOL;
    $outstr .= build_footer();
    echo $outstr;
}



/*
 * Edit a Device. Fetches the record data and shows the edit screen.
 *
 * @param string $_GET['action'] Must be 'edit'.
 * @param string $_GET['UUID'] The UUID of the Unit.
 */
function device_edit() {
    if ($_GET['action'] == 'edit') {
	edit_screen($_GET['UUID'], 'update', 'ThermFerm - Edit Device', '');
	return;
    } else {
	load('devices.php');
    }
}



/*
 * @link edit device
 * @link add device
 */
function device_list() {
    global $arr;

    $outstr  = build_header("ThermFerm - Devices Setup");
    $outstr .= '    <div id="errors">'.PHP_EOL;
    $outstr .= '    </div> <!-- errors -->'.PHP_EOL;
    $outstr .= '    <div id="etable">'.PHP_EOL;
    $outstr .= '     <table class="setup">'.PHP_EOL;
    $outstr .= '      <tr class="trhead">'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 300px;">UUID</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 120px;">Address</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 25px;">Sub</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 25px;">Ref</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 200px;">Cmt</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 70px;">Dir</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 70px;">Val</td>'.PHP_EOL;
    $outstr .= '       <td class="setup" style="width: 35px;">Edit</td>'.PHP_EOL;
    $outstr .= '      </tr>'.PHP_EOL;

    if (startsWith($arr[0], "212")) {
    	$j = 1;
    	while (1) {
	    if (strcmp($arr[$j], ".") == 0)
	    	break;
	    $f = explode(",", $arr[$j]);
	    $outstr .= '      <tr class="setup">'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[0].'</td>'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[1].'</td>'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[2].'</td>'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[3].'</td>'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[4].'</td>'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[5].'</td>'.PHP_EOL;
	    $outstr .= '       <td class="setup">'.$f[6].'</td>'.PHP_EOL;
	    if ($f[3] == 0)
		$outstr .= '       <td class="setup"><a href="devices.php?action=edit&amp;UUID='.$f[0].'">Edit</a></td>'.PHP_EOL;
	    else
		$outstr .= '       <td class="setup">Busy</td>'.PHP_EOL;
	    $outstr .= '      </tr>'.PHP_EOL;
	    $j++;
    	}
    }

    $outstr .= '     </table>'.PHP_EOL;
    $outstr .= '    </div> <!-- etable -->'.PHP_EOL;

    $outstr .= '    <div id="atable">'.PHP_EOL;
    $outstr .= '     <form method="POST" action="devices.php">'.PHP_EOL;
    $outstr .= '      <table class="editor">'.PHP_EOL;
    $outstr .= '      <tr class="trhead"><td colspan="3">Add new Device</td></tr>'.PHP_EOL;
    $outstr .= '       <tr class="editor">'.PHP_EOL;
    $outstr .= '        <td class="editname">Select Device type</td>'.PHP_EOL;
    $outstr .= '        <td class="editfield">'.PHP_EOL;
    $outstr .= '         <select name="Type">'.PHP_EOL;
    $outstr .= '          <option value="NA">Not Available</option>'.PHP_EOL;
    $outstr .= '          <option value="RC433">433 Mhz Radio Controller</option>'.PHP_EOL;
    $outstr .= '          <option value="DHT">DHTnn type sensor</option>'.PHP_EOL;
    $outstr .= '          <option value="I2C">I2C bus device</option>'.PHP_EOL;
    $outstr .= '          <option value="SPI">SPI bus device</option>'.PHP_EOL;
    $outstr .= '         </select>'.PHP_EOL;
    $outstr .= '        </td>'.PHP_EOL;
    $outstr .= '        <td class="editsub"><input type="submit" value="Add" name="key"></td>'.PHP_EOL;
    $outstr .= '<input type="hidden" value="testdata" name="action">';
    $outstr .= '<input type="hidden" value="add" name="command">';
    $outstr .= '<input type="hidden" value="00000000-0000-0000-0000-000000000000" name="UUID">';
    $outstr .= '<input type="hidden" value="UNDEF" name="Direction">';
    $outstr .= '<input type="hidden" value="0" name="Value">';
    $outstr .= '<input type="hidden" value="0" name="Offset">';
    $outstr .= '<input type="hidden" value="UNDEF" name="Present">';
    $outstr .= '<input type="hidden" value="address unknown" name="Address">';
    $outstr .= '<input type="hidden" value="0" name="Subdevice">';
    $outstr .= '<input type="hidden" value="-1" name="Gpiopin">';
    $outstr .= '<input type="hidden" value="Describe me" name="Description">';
    $outstr .= '<input type="hidden" value="Comment me" name="Comment">';
    $outstr .= '       </tr>'.PHP_EOL;
    $outstr .= '      </table>'.PHP_EOL;
    $outstr .= '     </form>'.PHP_EOL;
    $outstr .= '    </div> <!-- atable -->'.PHP_EOL;

    $outstr .= '    <script type="text/javascript">'.PHP_EOL;
    $outstr .= '     $(document).ready(function () {'.PHP_EOL;
    $outstr .= '      $("#maintenance").jqxButton({ width: 150, height: 25, theme: \'ui-redmond\' });'.PHP_EOL;
    $outstr .= '     });'.PHP_EOL;
    $outstr .= '    </script>'.PHP_EOL;
    $outstr .= build_footer();

    echo $outstr;
}