Mercurial
>
mbsePi-apps
/ graph
Search:
summary
shortlog
changelog
graph
tags
bookmarks
branches
files
zip
gz
help
graph
The revision graph only works with JavaScript-enabled browsers.
Added chiller configuration items
Mon, 26 Jun 2017 19:21:07 +0200
, by Michiel Broek
Changed livescreen, now displays thermometers. The chart is loaded on request. This speeds up loading the application.
Mon, 26 Jun 2017 13:58:11 +0200
, by Michiel Broek
Don't continuous send data to domoticz
Sun, 25 Jun 2017 13:02:06 +0200
, by Michiel Broek
Only send domoticz changed values
Sat, 10 Jun 2017 23:43:56 +0200
, by Michiel Broek
Changed state messages to domoticz
Sat, 10 Jun 2017 13:00:14 +0200
, by Michiel Broek
Version 0.6.1 added support for domoticz mqtt sensors.
Wed, 07 Jun 2017 23:06:47 +0200
, by Michiel Broek
Small web page changes
Wed, 31 May 2017 16:29:52 +0200
, by Michiel Broek
Upgraded jqwidgets to version 4.5.2
Sun, 28 May 2017 14:19:57 +0200
, by Michiel Broek
Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
Fri, 19 May 2017 16:34:21 +0200
, by Michiel Broek
Turn off MQTT debug
Mon, 08 May 2017 20:54:51 +0200
, by Michiel Broek
Add Raspberry support in MQTT init message
Mon, 08 May 2017 17:03:25 +0200
, by Michiel Broek
Extra shutdown delay
Mon, 08 May 2017 16:32:43 +0200
, by Michiel Broek
New MQTT protocol
Mon, 08 May 2017 16:26:02 +0200
, by Michiel Broek
Small fix
Sat, 29 Apr 2017 17:47:00 +0200
, by Michiel Broek
Added some MQTT publish clear functions. Version 0.5.8
Sat, 29 Apr 2017 17:07:36 +0200
, by Michiel Broek
Better door and 12 volt detection and logging
Thu, 12 May 2016 21:43:07 +0200
, by Michiel Broek
Fixed some MQTT messages. Added more profile MQTT messages. Version 0.5.7
Wed, 11 May 2016 14:47:27 +0200
, by Michiel Broek
Bumped to version 0.5.6
Mon, 09 May 2016 21:37:25 +0200
, by Michiel Broek
Units now have an unique alias name so that the MQTT messages are more friendly.
Mon, 09 May 2016 21:35:55 +0200
, by Michiel Broek
Created mqtt sourcefiles. Use flags to trigger publish messages. The main source does not know and does not care if MQTT messages will be sent. Version 0.5.5
Mon, 02 May 2016 16:15:37 +0200
, by Michiel Broek
Fixed empty setpoint values
Sat, 30 Apr 2016 21:25:10 +0200
, by Michiel Broek
Compiles mosquitto code if library is found on the system. Bumped to version 0.5.4
Sat, 30 Apr 2016 21:06:20 +0200
, by Michiel Broek
The FAN always runs if the unit is active. Bumped tp version 0.5.3
Sat, 26 Mar 2016 14:43:31 +0100
, by Michiel Broek
Code cleanup.
Thu, 17 Mar 2016 23:28:29 +0100
, by Michiel Broek
Fix Deadlok problem when there is only a heater or a cooler.
Thu, 17 Mar 2016 17:25:02 +0100
, by Michiel Broek
Fixed server log when changed PID parameters from the web interface.
Thu, 17 Mar 2016 17:10:41 +0100
, by Michiel Broek
Changed PID code. PID parameters are now stored 3 digits instead of 2 behind the decimal point. Prevent extreme heating or cooling in Beer mode. Heat and Cool lockdown now allows the lagest value to win instead of zero them both. PID output treshold from 2% to 50%.
Fri, 11 Mar 2016 20:27:02 +0100
, by Michiel Broek
Switched PID to BOO mode for all modes.
Sat, 05 Mar 2016 12:50:23 +0100
, by Michiel Broek
Remove temporary marker.
Fri, 26 Feb 2016 15:14:00 +0100
, by Michiel Broek
Swapped heat/cool symbols.
Fri, 26 Feb 2016 13:38:44 +0100
, by Michiel Broek
Small brewpanel display error fix, did not affect real hardware.
Thu, 25 Feb 2016 23:24:50 +0100
, by Michiel Broek
Bumped to version 0.5.2 and removed the brewco subdirectory because that has been implemented as Arduino project.
Thu, 25 Feb 2016 23:14:46 +0100
, by Michiel Broek
Compacted LCD display for units, allways 4 instead of 4 to 6 lines. But it's a bit more cryptic. We could write a short manual.
Thu, 25 Feb 2016 22:42:54 +0100
, by Michiel Broek
Fixed compiler warning
Thu, 25 Feb 2016 20:26:40 +0100
, by Michiel Broek
Use user defined characters for the LCD display just like in Arduino projects.
Thu, 25 Feb 2016 20:12:27 +0100
, by Michiel Broek
Merge
Mon, 22 Feb 2016 19:24:49 +0100
, by Michiel Broek
Simulate sensors resolution.
Mon, 22 Feb 2016 19:22:39 +0100
, by Michiel Broek
Less PID debug logging.
Thu, 31 Dec 2015 21:03:52 +0100
, by Michiel Broek
Fixed compiling on real Pi's
Thu, 31 Dec 2015 20:52:28 +0100
, by Michiel Broek
Bild target temperature 0.1 degree higher. Removed debug log from the simulator
Sun, 27 Dec 2015 20:52:52 +0100
, by Michiel Broek
The simulator now simulates the heater power in Watts. Changed Mash Remove? prompt.
Sun, 27 Dec 2015 20:21:06 +0100
, by Michiel Broek
Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.
Sun, 27 Dec 2015 17:52:26 +0100
, by Michiel Broek
Moved mash added question to after mash rest mash-in step.
Sun, 27 Dec 2015 17:18:58 +0100
, by Michiel Broek
Updated several prompts. Added pump prime. Added first part of a test plan.
Sun, 27 Dec 2015 16:09:44 +0100
, by Michiel Broek
Improved steps logging. Some small fixes in the brew automation.
Sat, 26 Dec 2015 23:35:42 +0100
, by Michiel Broek
The brew state machine is complete, works but is not bugfree
Sat, 26 Dec 2015 21:45:44 +0100
, by Michiel Broek
Added initial part of the brew automation.
Tue, 22 Dec 2015 21:07:14 +0100
, by Michiel Broek
Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.
Tue, 22 Dec 2015 15:59:26 +0100
, by Michiel Broek
less
more
|
(0)
-300
-100
-48
+48
+100
tip