Mercurial > mbsePi-apps / changelog

Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.

• Sun, 27 Dec 2015 17:52:26 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 17:52:26 +0100] rev 477
• Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.

Moved mash added question to after mash rest mash-in step.

• Sun, 27 Dec 2015 17:18:58 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 17:18:58 +0100] rev 476
• Moved mash added question to after mash rest mash-in step.

Updated several prompts. Added pump prime. Added first part of a test plan.

• Sun, 27 Dec 2015 16:09:44 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 16:09:44 +0100] rev 475
• Updated several prompts. Added pump prime. Added first part of a test plan.

Improved steps logging. Some small fixes in the brew automation.

• Sat, 26 Dec 2015 23:35:42 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Dec 2015 23:35:42 +0100] rev 474
• Improved steps logging. Some small fixes in the brew automation.

The brew state machine is complete, works but is not bugfree

• Sat, 26 Dec 2015 21:45:44 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Dec 2015 21:45:44 +0100] rev 473
• The brew state machine is complete, works but is not bugfree

Added initial part of the brew automation.

• Tue, 22 Dec 2015 21:07:14 +0100
• by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Dec 2015 21:07:14 +0100] rev 472
• Added initial part of the brew automation.

Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.

• Tue, 22 Dec 2015 15:59:26 +0100
• by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Dec 2015 15:59:26 +0100] rev 471
• Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.

Revised brew steps again

• Mon, 21 Dec 2015 22:53:29 +0100
• by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 22:53:29 +0100] rev 470
• Revised brew steps again

Revised brew steps

• Mon, 21 Dec 2015 22:36:30 +0100
• by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 22:36:30 +0100] rev 469
• Revised brew steps

Removed LCD auto dim mode, the display is allways on if this program runs.

• Mon, 21 Dec 2015 21:21:16 +0100
• by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 21:21:16 +0100] rev 468
• Removed LCD auto dim mode, the display is allways on if this program runs.

Finished manual mode.

• Mon, 21 Dec 2015 21:09:36 +0100
• by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 21:09:36 +0100] rev 467
• Finished manual mode.

Manual mode works with heat percentages.

• Sun, 20 Dec 2015 23:26:03 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Dec 2015 23:26:03 +0100] rev 466
• Manual mode works with heat percentages.

Added program locking.

• Sun, 20 Dec 2015 20:52:37 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Dec 2015 20:52:37 +0100] rev 465
• Added program locking.

Added file copy. Move home directory detection to the main program function. During opening of the main configuration file, backups are made, 10 revisions in total.

• Sun, 20 Dec 2015 20:37:40 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Dec 2015 20:37:40 +0100] rev 464
• Added file copy. Move home directory detection to the main program function. During opening of the main configuration file, backups are made, 10 revisions in total.

Completed the recipe editor.

• Thu, 17 Dec 2015 22:45:54 +0100
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Dec 2015 22:45:54 +0100] rev 463
• Completed the recipe editor.