changelog
- Sun, 07 Jul 2024 12:43:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Jul 2024 12:43:27 +0200] rev 737
- Version 0.9.21. Temperature reading behind the debug flag
- Sat, 06 Jul 2024 19:28:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 06 Jul 2024 19:28:08 +0200] rev 736
- Handle subdevices during devices startup
- Sat, 06 Jul 2024 15:59:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 06 Jul 2024 15:59:34 +0200] rev 735
- Version 0.9.20
- Sat, 06 Jul 2024 15:55:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 06 Jul 2024 15:55:14 +0200] rev 734
- Fix to recover from a sensor in error.
- Sat, 06 Jul 2024 14:52:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 06 Jul 2024 14:52:49 +0200] rev 733
- Version 0.9.20b1. Removed debug logging from DHT11 reading. Fixed reading one-wire temperature sensors state when inserted or removed from the bus. Automatic backup device selection works now.
- Tue, 07 May 2024 14:11:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 07 May 2024 14:11:31 +0200] rev 732
- Save one devices loop when handling a 2413 device.
- Mon, 06 May 2024 15:34:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 06 May 2024 15:34:32 +0200] rev 731
- Version 0.9.20a2. Renamed one-wire struct resolution to rd_cache and added wr_cache. The rd_cache and wr_cache values are used by the DS2413. Added these values to the grid so we can see them live.
- Sun, 05 May 2024 17:24:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 05 May 2024 17:24:54 +0200] rev 730
- Much faster shutdown of the websocket service.
- Sun, 05 May 2024 16:31:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 05 May 2024 16:31:47 +0200] rev 729
- Made devices loop a bit slower.
- Sun, 05 May 2024 15:49:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 05 May 2024 15:49:03 +0200] rev 728
- Version 0.9.20a1. Analyse threads cpu usage. One-wire added a resolution flag to prevent continuous resolution checks, now only for new sensors and replugged known sensors. Added two 40 sSec delays in the state machine. In the panel thread moved a few locks so these expensive calls are called only when needed.
- Sat, 04 May 2024 19:10:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 May 2024 19:10:03 +0200] rev 727
- Different gettid() test
- Sat, 04 May 2024 17:37:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 May 2024 17:37:47 +0200] rev 726
- Added test for gettid()
- Sat, 04 May 2024 15:43:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 May 2024 15:43:37 +0200] rev 725
- Version 0.9.19
- Sat, 04 May 2024 15:18:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 May 2024 15:18:02 +0200] rev 724
- Log pid of each started thread so we can see which uses the most cpu time.
- Sat, 04 May 2024 13:49:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 May 2024 13:49:36 +0200] rev 723
- Fixed initial show instead of hide of the toggle switches. Block edit fermenter when the fermenter is in use.
- Fri, 03 May 2024 20:41:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 May 2024 20:41:26 +0200] rev 722
- In fermenter screen fix errors during page load.
- Fri, 03 May 2024 20:15:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 May 2024 20:15:17 +0200] rev 721
- Fixed updating PID parameters. Jqwidgets javascripts cleanup.
- Fri, 03 May 2024 16:58:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 May 2024 16:58:40 +0200] rev 720
- Removed some unused files
- Fri, 03 May 2024 16:53:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 May 2024 16:53:00 +0200] rev 719
- Last changes to fermenter.js (maybe). Simulator custom labels for the door switch. Some extra columns in the simulators grid.
- Fri, 03 May 2024 15:12:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 May 2024 15:12:25 +0200] rev 718
- Some javascript fixes and cleanup
- Fri, 03 May 2024 14:14:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 May 2024 14:14:01 +0200] rev 717
- Add new fermenter adds dummy yeast temperatures. Periodic thermferm unit logging adds the unit alias name. Added Green LED hide color. Moved getglobal.php to dbglobal.php. Adjusted several record types in global and fermenter javascript records so there is less guesswork. Only display control leds and switches for defined equipment.
- Thu, 02 May 2024 15:49:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 May 2024 15:49:16 +0200] rev 716
- Version 0.9.19b3. The simulator thread can be paused to be able to add and delete simulators. Added simulated door and PSU status. Devices can now fully use multiple simulators. Better rounding of simulated temperature values. The server SIMULATOR DEL and ADD commands pause the simulator when the linked list is manipulated. Fixed SIGSEGV when a simulator is added. Added socket SO_REUSEADDR again to the server socket.
- Wed, 01 May 2024 14:38:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 May 2024 14:38:37 +0200] rev 715
- Added device_present() function to easy update device present from one-wire and simulator devices. When a simulator temperature sensor present is changed, the device table is changed too. Controlling simulator relays is now for each simulator. The simulator runs under the state machine. If something changed in the running simulator, all data is broadcasted over websocket. Completed the web editor.
- Tue, 30 Apr 2024 17:26:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 30 Apr 2024 17:26:41 +0200] rev 714
- Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
- Sun, 28 Apr 2024 15:50:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 Apr 2024 15:50:42 +0200] rev 713
- It was impossible to remove devices from fermenters. Added beer_address2 device to the simulator.
- Sun, 28 Apr 2024 14:25:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 Apr 2024 14:25:26 +0200] rev 712
- Log marking device missing if a onewire devices goes away. Fixes in fermenters display. Added Present and Inuse columns in devices list.
- Thu, 25 Apr 2024 16:44:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Apr 2024 16:44:54 +0200] rev 711
- Version 0.9.19b1. Less noisy logging.
- Thu, 25 Apr 2024 15:10:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Apr 2024 15:10:37 +0200] rev 710
- Moved webcam scripts over to this www directory. Upgraded jquery to 2.1.1 (still old).
- Thu, 25 Apr 2024 14:52:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Apr 2024 14:52:50 +0200] rev 709
- Removed old webpages from the repository
- Thu, 25 Apr 2024 14:26:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Apr 2024 14:26:47 +0200] rev 708
- Version 0.9.19a6. Fixes after a short trial on the production controller. Fixed json for alternate beer termperature sensor. Fixed division by 1000 for the room temperature and humidity values. The dropdown list for devices shows the address instead of description in the list.
- Wed, 24 Apr 2024 21:58:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 24 Apr 2024 21:58:27 +0200] rev 707
- Version 0.9.19a5
- Wed, 24 Apr 2024 21:36:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 24 Apr 2024 21:36:49 +0200] rev 706
- Possible fix for large sockets messages.
- Wed, 24 Apr 2024 20:44:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 24 Apr 2024 20:44:56 +0200] rev 705
- Version 0.9.19a4
- Wed, 24 Apr 2024 20:36:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 24 Apr 2024 20:36:06 +0200] rev 704
- Finished save fermenter uit edit.
- Wed, 24 Apr 2024 16:46:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 24 Apr 2024 16:46:45 +0200] rev 703
- Fermenter editor layout is ready. Load record done. Add and Delete a new fermenter is done.
- Wed, 24 Apr 2024 11:04:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 24 Apr 2024 11:04:00 +0200] rev 702
- Drop fermenter volume setting.
- Tue, 23 Apr 2024 20:45:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 23 Apr 2024 20:45:29 +0200] rev 701
- Device Save implemented.
- Tue, 23 Apr 2024 19:50:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 23 Apr 2024 19:50:05 +0200] rev 700
- Added device delete
- Tue, 23 Apr 2024 16:52:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 23 Apr 2024 16:52:13 +0200] rev 699
- Added Add new device.
- Tue, 23 Apr 2024 13:06:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 23 Apr 2024 13:06:33 +0200] rev 698
- Finished global setup including Save.
- Mon, 22 Apr 2024 20:58:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Apr 2024 20:58:55 +0200] rev 697
- The global settings screen added. No Save function yet.
- Mon, 22 Apr 2024 15:12:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Apr 2024 15:12:27 +0200] rev 696
- Added web page to display the one-wire bus live status.
- Mon, 22 Apr 2024 13:50:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Apr 2024 13:50:23 +0200] rev 695
- Final 0.9.19a3 change.
- Mon, 22 Apr 2024 13:40:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Apr 2024 13:40:21 +0200] rev 694
- Version 0.9.19a3. Fixed segfault in onewire temperature measurement. Fixed json error in onewire device.
- Mon, 22 Apr 2024 11:33:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Apr 2024 11:33:04 +0200] rev 693
- Version 0.9.19a2. Dropped TEMPSTATE[] and only use DEVPRESENT[] to mark devices state. Adjusted webpages for this switch in responses. Adjusted MySQL mon_fermenters enum values too. Rename some global Config records to better reflect their real use.Added one-wire json records and websocket. Announce when some onewire device changes. Add UNITS JSON command without parameter. Dropped global tempFormat setting that was never used.
- Sat, 20 Apr 2024 11:48:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 20 Apr 2024 11:48:20 +0200] rev 692
- Fixed two compiler warnings on arm platform
- Sat, 20 Apr 2024 11:34:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 20 Apr 2024 11:34:00 +0200] rev 691
- Version 0.9.19a1
- Sat, 20 Apr 2024 10:53:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 20 Apr 2024 10:53:18 +0200] rev 690
- Better handling of a removed DS18B20 temperature sensor.
- Fri, 19 Apr 2024 20:56:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 19 Apr 2024 20:56:55 +0200] rev 689
- Create global_json() for all and expanded the data to the complete setup. Added design for the global setup.
- Fri, 19 Apr 2024 14:11:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 19 Apr 2024 14:11:19 +0200] rev 688
- More copyright references.
- Fri, 19 Apr 2024 11:31:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 19 Apr 2024 11:31:46 +0200] rev 687
- Devices edit popup layout ready.
- Thu, 18 Apr 2024 17:17:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Apr 2024 17:17:22 +0200] rev 686
- More work for devices list and editor.
- Thu, 18 Apr 2024 14:20:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 18 Apr 2024 14:20:19 +0200] rev 685
- Devices list grid added.
- Wed, 17 Apr 2024 19:54:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 17 Apr 2024 19:54:56 +0200] rev 684
- Updated dependencies. Devices json data is created in de devices source for all places where it is needed. Added devices_ws function to broadcast all devices, to be used when any device is changed. The devices loop detects changes in input values and calls devices_ws if so. The server uses the general devices json data.
- Wed, 17 Apr 2024 15:03:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 17 Apr 2024 15:03:01 +0200] rev 683
- Fixed fermenter switches in NONE mode. Som other small bugfixes.
- Wed, 17 Apr 2024 13:18:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 17 Apr 2024 13:18:22 +0200] rev 682
- Websocket ping/pong uses sequence numbers.
- Tue, 16 Apr 2024 16:20:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 16 Apr 2024 16:20:34 +0200] rev 681
- Minor details for server DEVICE commands. Added getdevice<s> php scripts.
- Tue, 16 Apr 2024 16:03:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 16 Apr 2024 16:03:47 +0200] rev 680
- Increased server buffersize from 1024 to 4096. Added DEVICE JSON <uuid> command. Added websocket response fermenter profile. The fermenter monitor screen is ready (maybe).
- Mon, 15 Apr 2024 17:06:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 15 Apr 2024 17:06:15 +0200] rev 679
- Added getglobal.php script
- Mon, 15 Apr 2024 17:04:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 15 Apr 2024 17:04:57 +0200] rev 678
- Better websocket broadcast messages. Added GLOBAL JSON command to the server. Better logic to trigger websocket and mqtt data updates for the fermenter units. Websocket receive added fermenter mode, stage, setpoints, switches. Added more css styles for the fermenter screen. Added the fermenter screen php and javascript.
- Sun, 14 Apr 2024 14:41:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Apr 2024 14:41:38 +0200] rev 677
- Server json unit data list added
- Sun, 14 Apr 2024 12:46:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Apr 2024 12:46:02 +0200] rev 676
- Add stylesheet, about page. Add menu for fermenters. Add websocket port setup to the config server.
- Sat, 13 Apr 2024 16:50:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 13 Apr 2024 16:50:26 +0200] rev 675
- Added websockets to thermferm. Started new www directory for websocket enabled web. The init script now waits until thermferm is completely stopped.
- Thu, 11 Apr 2024 15:58:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 11 Apr 2024 15:58:49 +0200] rev 674
- Code cleanup
- Thu, 11 Apr 2024 15:01:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 11 Apr 2024 15:01:46 +0200] rev 673
- Version 0.9.18
- Thu, 11 Apr 2024 14:57:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 11 Apr 2024 14:57:32 +0200] rev 672
- Only log temperature error once. Only log temperature Ok again once. Do not log changed temperature.
- Thu, 11 Apr 2024 13:18:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 11 Apr 2024 13:18:20 +0200] rev 671
- Finished one-wire ds2413 output
- Thu, 11 Apr 2024 11:19:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 11 Apr 2024 11:19:04 +0200] rev 670
- Stop logging ghost one-wire devices.
- Mon, 08 Apr 2024 13:16:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Apr 2024 13:16:42 +0200] rev 669
- Reboot from the panel is now restart application. The restart is working again, also via bmsapp.
- Mon, 08 Apr 2024 11:23:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Apr 2024 11:23:45 +0200] rev 668
- Upgraded MIGRATION document.
- Mon, 08 Apr 2024 10:57:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Apr 2024 10:57:12 +0200] rev 667
- Removed lcd-buffer create logmessage. Combined Keys and Delay states.
- Sun, 07 Apr 2024 20:26:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Apr 2024 20:26:37 +0200] rev 666
- Added commandline switch --foreground, the --debug now only activates extra debug logging. No more console output. The thermferm process uses a state table, this makes the code more readable and have less large functions.
- Sun, 07 Apr 2024 16:05:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Apr 2024 16:05:06 +0200] rev 665
- Fermentation processing in it's own function.
- Sun, 07 Apr 2024 11:25:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Apr 2024 11:25:00 +0200] rev 664
- Version 0.9.17a3. Prepare for thermferm state tables.
- Sat, 06 Apr 2024 17:21:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 06 Apr 2024 17:21:29 +0200] rev 663
- Updated MIGRATION document.
- Fri, 05 Apr 2024 20:10:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 05 Apr 2024 20:10:26 +0200] rev 662
- One-wire tread more relaxed logging.
- Fri, 05 Apr 2024 19:30:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 05 Apr 2024 19:30:41 +0200] rev 661
- Version 0.9.17a2. Disabled a lot of mutex locks, some are blocking and need to be fixed. This version seems to be working, more or less.
- Fri, 05 Apr 2024 16:19:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 05 Apr 2024 16:19:39 +0200] rev 660
- Version 0.9.17a1. Revised starting and stopping the threads. Fixed stopping the command server thread. Moved one-wire tempeature sensors resolution correction to the one-wire thread. The devices thread fetches temperatures from the one-wire thread. The one-wire thread does everything for the temperature sensors. The command server uses private sockets. Still, only one session at the same time is handled.
- Wed, 03 Apr 2024 19:33:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Apr 2024 19:33:38 +0200] rev 659
- Added state to scan vanished one-wire devices. Update devices if a one-wire device returns on the bus.
- Wed, 03 Apr 2024 16:53:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Apr 2024 16:53:22 +0200] rev 658
- Fix for compile with wiringPi
- Wed, 03 Apr 2024 16:21:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Apr 2024 16:21:46 +0200] rev 657
- Read ds2413 moved to one-wire thread. Only reprogram if it is an input and programmed as output.
- Wed, 03 Apr 2024 12:14:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Apr 2024 12:14:45 +0200] rev 656
- One-wire thread is now the first to start. The devices_detect() function now uses the detected one-wire linked list instead of scan the sysfs. Base code for ds2413 added in the state table, needs rework.
- Tue, 02 Apr 2024 15:29:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Apr 2024 15:29:16 +0200] rev 655
- State machine logging only when debug is active.
- Tue, 02 Apr 2024 15:03:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Apr 2024 15:03:12 +0200] rev 654
- Added one-wire thread and some old state table macro's. The state machine first state scans new one-wire devices and stores them in a linked list.
- Wed, 27 Mar 2024 18:59:39 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 27 Mar 2024 18:59:39 +0100] rev 653
- Version 0.9.17
- Wed, 27 Mar 2024 17:19:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 27 Mar 2024 17:19:46 +0100] rev 652
- Moved all delay functions into a new general file.
- Wed, 27 Mar 2024 15:49:31 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 27 Mar 2024 15:49:31 +0100] rev 651
- Log compile options on startup.
- Mon, 25 Mar 2024 17:14:56 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 25 Mar 2024 17:14:56 +0100] rev 650
- Brought the retry attempts to read the DHT11 sensors to the main devices loop. The actual read function is now very simple. Called every 30 seconds when all is well, or 2 seconds if something is wrong.
- Mon, 25 Mar 2024 11:44:45 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 25 Mar 2024 11:44:45 +0100] rev 649
- Version 0.9.16. Final changes DHT11 reading via sysfs.
- Sun, 24 Mar 2024 17:12:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 24 Mar 2024 17:12:23 +0100] rev 648
- Better detection of the DHT11 sensors. Read DHT11 with errors detection and reapeated tries.
- Sat, 23 Mar 2024 20:28:17 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Mar 2024 20:28:17 +0100] rev 647
- Work to move dht userspace code to kernel module.
- Sat, 23 Mar 2024 16:01:24 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Mar 2024 16:01:24 +0100] rev 646
- Running threads and locking doesn't depend on wiringPi anymore.
- Sat, 23 Mar 2024 12:18:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Mar 2024 12:18:14 +0100] rev 645
- All thread locks from wiringPi to standard pthreads.
- Sat, 23 Mar 2024 09:31:01 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Mar 2024 09:31:01 +0100] rev 644
- Added MIGRATION document. Trying to drop usleep() call to replace by nanosleep(). Some code cleanup.
- Fri, 22 Mar 2024 11:48:35 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 22 Mar 2024 11:48:35 +0100] rev 643
- Updates for DHT11 reading
- Sat, 16 Mar 2024 11:54:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Mar 2024 11:54:46 +0100] rev 642
- Impoved SDL configure checks
- Sat, 16 Mar 2024 11:09:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Mar 2024 11:09:43 +0100] rev 641
- Version 0.9.15
- Sat, 16 Mar 2024 11:08:27 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Mar 2024 11:08:27 +0100] rev 640
- Renamed initscript
- Sat, 16 Mar 2024 11:06:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Mar 2024 11:06:16 +0100] rev 639
- Init system for Slackware only
- Sat, 16 Mar 2024 10:51:41 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Mar 2024 10:51:41 +0100] rev 638
- Final rebuild brewpanel to SDL2
- Fri, 15 Mar 2024 20:57:49 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 15 Mar 2024 20:57:49 +0100] rev 637
- Add --enable-wiringpi to configure script to allow to disable wiringpi even when it is installed. Use SDL2 instead of partly old SDL.
- Thu, 14 Mar 2024 19:37:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Mar 2024 19:37:53 +0100] rev 636
- Create installation directories
- Thu, 14 Mar 2024 19:32:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Mar 2024 19:32:37 +0100] rev 635
- Create installation directories
- Thu, 14 Mar 2024 17:10:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Mar 2024 17:10:14 +0100] rev 634
- Version 0.9.14
- Thu, 14 Mar 2024 17:07:09 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Mar 2024 17:07:09 +0100] rev 633
- Add DESTDIR installation target. Some kicad update again. Moved init script to /etc/rc.d
- Sat, 25 Feb 2023 10:53:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 25 Feb 2023 10:53:42 +0100] rev 632
- Version 0.9.13. Close socket after use, fixes too much files open.
- Mon, 13 Feb 2023 16:39:03 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 13 Feb 2023 16:39:03 +0100] rev 631
- Version 0.9.12
- Mon, 13 Feb 2023 16:30:58 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 13 Feb 2023 16:30:58 +0100] rev 630
- Final changes for current wifi parameters.
- Mon, 13 Feb 2023 15:22:43 +0100
- by Chiel Broek <mbse@mbse.eu> [Mon, 13 Feb 2023 15:22:43 +0100] rev 629
- Updates for cabled networks
- Mon, 13 Feb 2023 15:11:20 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 13 Feb 2023 15:11:20 +0100] rev 628
- Design wifi parameter reporting
- Sat, 01 Oct 2022 16:16:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 01 Oct 2022 16:16:36 +0200] rev 627
- Upgraded drawing to kicad 6.0.8
- Mon, 26 Sep 2022 21:30:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Sep 2022 21:30:17 +0200] rev 626
- Upgraded kicad to version 6
- Tue, 09 Aug 2022 15:08:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 09 Aug 2022 15:08:17 +0200] rev 625
- Final changes in the css.
- Tue, 09 Aug 2022 14:53:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 09 Aug 2022 14:53:57 +0200] rev 624
- Updated css for webcam-ng
- Tue, 09 Aug 2022 13:53:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 09 Aug 2022 13:53:52 +0200] rev 623
- Added favicon.ico
- Mon, 08 Aug 2022 19:39:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Aug 2022 19:39:37 +0200] rev 622
- Merged again
- Mon, 08 Aug 2022 11:51:59 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Aug 2022 11:51:59 +0200] rev 621
- Improved conditional styling
- Mon, 08 Aug 2022 11:49:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Aug 2022 11:49:57 +0200] rev 620
- Improved conditional styling
- Mon, 08 Aug 2022 19:37:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Aug 2022 19:37:49 +0200] rev 619
- Merged
- Mon, 08 Aug 2022 17:04:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Aug 2022 17:04:15 +0200] rev 618
- Added nextgen webcam scripts.
- Mon, 08 Aug 2022 10:54:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 Aug 2022 10:54:27 +0200] rev 617
- Upgraded jqwidgets
- Sun, 10 Jul 2022 16:58:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Jul 2022 16:58:40 +0200] rev 616
- Always send network information, our IP may be changed.
- Sun, 10 Jul 2022 15:03:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Jul 2022 15:03:26 +0200] rev 615
- Fixed init problems.
- Sun, 10 Jul 2022 14:33:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Jul 2022 14:33:13 +0200] rev 614
- Version 0.9.11. Removed lcd debug message after 7 years. Added setup for alternative beer sensor. If the main sensor is gone, the alternative will be used.
- Fri, 28 May 2021 14:25:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 28 May 2021 14:25:56 +0200] rev 613
- Added kicad drawings
- Thu, 13 May 2021 13:49:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 13 May 2021 13:49:04 +0200] rev 612
- Make sure the hostname doesn't contain the domain name. Added Slackare init and setup scripts.
- Wed, 12 May 2021 21:17:59 +0200
- by Michiel Broek [Wed, 12 May 2021 21:17:59 +0200] rev 611
- Improved logging if wiringpi failed.
- Sun, 27 Sep 2020 17:08:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Sep 2020 17:08:27 +0200] rev 610
- Implemented MQTT user/password auth.
- Sat, 12 Sep 2020 16:50:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Sep 2020 16:50:35 +0200] rev 609
- Version 0.9.10.
- Sat, 12 Sep 2020 15:23:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Sep 2020 15:23:49 +0200] rev 608
- Changed pub_domoticz mqtt publishing.
- Sat, 27 Jun 2020 19:28:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Jun 2020 19:28:10 +0200] rev 607
- Better logging for locking the daemon and fixed stale lock recovery.
- Mon, 18 May 2020 11:03:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 May 2020 11:03:40 +0200] rev 606
- Version 0.9.9 Don't flag fermenter death if the unit is turned off. Fix a wrong log message. Send unit data even if the unit is turned off.
- Sat, 25 Apr 2020 20:31:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 25 Apr 2020 20:31:31 +0200] rev 605
- Version 0.9.8. Added extra path to the fonts for Debian buster. Changed the PID to work on Proportional on Measurement. Added loops so that it looks like the PID is running at 100 mSec intervals.
- Mon, 04 Nov 2019 13:19:27 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Nov 2019 13:19:27 +0100] rev 604
- Version 0.9.7. Increased the maximum fermentation temperature to 45 degrees to allow Kveik fermentations.
- Sun, 07 Jul 2019 14:31:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Jul 2019 14:31:10 +0200] rev 603
- Merged fix from default
- Sun, 07 Jul 2019 14:28:37 +0200
- by Chiel Broek <mbse@mbse.eu> [Sun, 07 Jul 2019 14:28:37 +0200] rev 602
- Fix for non Pi hardware and virtual Pi's.
- Sun, 07 Jul 2019 13:55:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Jul 2019 13:55:03 +0200] rev 601
- Merged with default
- Sun, 07 Jul 2019 13:54:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Jul 2019 13:54:24 +0200] rev 600
- Version 0.9.6
- Sun, 07 Jul 2019 13:04:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Jul 2019 13:04:16 +0200] rev 599
- Fix one byte too large buffer copy
- Sun, 07 Jul 2019 12:58:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 07 Jul 2019 12:58:06 +0200] rev 598
- Added wiringPi hardware detection code.
- Thu, 09 May 2019 19:50:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 19:50:26 +0200] rev 597
- Less debug messages on stdout
- Thu, 09 May 2019 19:42:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 19:42:33 +0200] rev 596
- Revoved old temperature sensors read errors workaround.
- Thu, 09 May 2019 17:20:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 17:20:58 +0200] rev 595
- Removed simulator debug support
- Thu, 09 May 2019 17:16:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 17:16:49 +0200] rev 594
- Code cleanup and removed a debug message
- Thu, 09 May 2019 17:10:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 17:10:54 +0200] rev 593
- Removed Graph button from the status screen.
- Thu, 09 May 2019 17:01:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 17:01:56 +0200] rev 592
- Removed ARCHIVER commands and web pages.
- Thu, 09 May 2019 16:40:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 16:40:17 +0200] rev 591
- Removed writing local unit data logs
- Thu, 09 May 2019 15:17:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 09 May 2019 15:17:30 +0200] rev 590
- Created stable branch
- Sun, 28 Apr 2019 19:59:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 Apr 2019 19:59:43 +0200] rev 589
- Final device thermometer error detection.
- Sun, 28 Apr 2019 17:03:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 Apr 2019 17:03:45 +0200] rev 588
- Added sensor precision initialize. Changed PID logging.
- Sun, 28 Apr 2019 16:27:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 Apr 2019 16:27:54 +0200] rev 587
- Experimental 12 bits resolution init
- Sun, 28 Apr 2019 11:38:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 Apr 2019 11:38:30 +0200] rev 586
- Changed 1-wire DS18B20 sensor error check.
- Sat, 27 Apr 2019 21:07:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Apr 2019 21:07:00 +0200] rev 585
- More relaxed DHT11 readings
- Sat, 27 Apr 2019 20:54:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Apr 2019 20:54:20 +0200] rev 584
- Removed not working extra check
- Sat, 27 Apr 2019 20:47:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Apr 2019 20:47:26 +0200] rev 583
- Attempt to better check the temperature sensors and lower the cpu load.
- Sat, 27 Apr 2019 15:36:16 +0200
- by Chiel Broek <mbse@mbse.eu> [Sat, 27 Apr 2019 15:36:16 +0200] rev 582
- Version 0.9.5, interior lights are now only controlled by the open door or a 5 minutes timer. The timer is started via an MQTT command. The BMS web application sends this command just before a webcam page is requested.
- Sun, 31 Mar 2019 13:57:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 31 Mar 2019 13:57:25 +0200] rev 581
- Added webcam files.
- Wed, 27 Feb 2019 22:21:20 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 27 Feb 2019 22:21:20 +0100] rev 580
- Version 0.9.4 Handle yeast temperature limits per fermenter.
- Wed, 27 Feb 2019 17:38:06 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 27 Feb 2019 17:38:06 +0100] rev 579
- Concept for yeast limits settings.
- Thu, 07 Feb 2019 14:59:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Feb 2019 14:59:47 +0100] rev 578
- Version 0.9.3. Splitted the temperature low and high settings in fridge and beer mode.
- Mon, 21 Jan 2019 17:11:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Jan 2019 17:11:50 +0100] rev 577
- DLOG messages are no longer retained.
- Sun, 20 Jan 2019 14:08:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Jan 2019 14:08:43 +0100] rev 576
- Events are in the flat file log too
- Sun, 20 Jan 2019 13:34:09 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Jan 2019 13:34:09 +0100] rev 575
- Version 0.9.2 DLOG messages every minute unless a unit is off. More event messages added. The target temperatur is now taken from the PIDs.
- Sat, 19 Jan 2019 22:07:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Jan 2019 22:07:42 +0100] rev 574
- Removed some debug code
- Sat, 19 Jan 2019 20:31:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Jan 2019 20:31:50 +0100] rev 573
- Fix for compiling with wiringPi
- Sat, 19 Jan 2019 20:12:56 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Jan 2019 20:12:56 +0100] rev 572
- Send MQTT messages with temperature values also when the fermenter is off.
- Sat, 19 Jan 2019 11:38:09 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 19 Jan 2019 11:38:09 +0100] rev 571
- Version 0.9.1. Added fermentation profiles via MQTT. Added uuid field for loaded product. Removed some debug messages in the simulator. Removed dead code and debug messages from the lcd driver.
- Mon, 14 Jan 2019 22:46:27 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 14 Jan 2019 22:46:27 +0100] rev 570
- Removed useless version marks from the xml configuration. Added DCMD profile configuration to install and delete profiles in a fermenter. Removed the old profiles configuration. Removed useless xml configuration error check because none has been triggered in five years, Removed several obsolete upgrade functions. Updated the web liveview.
- Thu, 10 Jan 2019 16:33:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Jan 2019 16:33:42 +0100] rev 569
- Version 0.9.0. Implemented DCMD via mqtt to set stage, mode, setpoint low and high. Implemeted DCMD via mqtt to set heater, cooler, fan and light state. Implemented DCMD via mqtt to set product code and name. Set the PID's in fridge mode without idle range offset, that was an old leftover setting that was obsolete.
- Mon, 07 Jan 2019 13:23:17 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 07 Jan 2019 13:23:17 +0100] rev 568
- Switched export server to https
- Fri, 24 Aug 2018 15:43:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 24 Aug 2018 15:43:32 +0200] rev 567
- Versie 0.8.9
- Fri, 24 Aug 2018 14:14:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 24 Aug 2018 14:14:31 +0200] rev 566
- Added Carbonation stage.
- Mon, 06 Aug 2018 17:04:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 06 Aug 2018 17:04:57 +0200] rev 565
- Fix not generating a valid system uuid
- Sat, 04 Aug 2018 16:29:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 04 Aug 2018 16:29:12 +0200] rev 564
- Versie 0.8.8 Fermentation stage implemented in units.
- Fri, 03 Aug 2018 21:58:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 Aug 2018 21:58:30 +0200] rev 563
- On Raspberry with WiringPi better hardware info is sent with NBIRTH
- Fri, 03 Aug 2018 16:56:55 +0200
- by Chiel Broek <mbse@mbse.eu> [Fri, 03 Aug 2018 16:56:55 +0200] rev 562
- Fix for deprecated warnings
- Fri, 03 Aug 2018 16:13:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 03 Aug 2018 16:13:17 +0200] rev 561
- Versie 0.8.7. Fixed a lot of memory leaks with the aid of valgrind.
- Thu, 02 Aug 2018 13:39:30 +0200
- by Chiel Broek <mbse@mbse.eu> [Thu, 02 Aug 2018 13:39:30 +0200] rev 560
- Forced mosquitto before thermferm
- Thu, 02 Aug 2018 13:19:38 +0200
- by Chiel Broek <mbse@mbse.eu> [Thu, 02 Aug 2018 13:19:38 +0200] rev 559
- Improved Debian installation
- Thu, 02 Aug 2018 13:12:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Aug 2018 13:12:50 +0200] rev 558
- Update init script and installation
- Thu, 02 Aug 2018 12:20:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Aug 2018 12:20:06 +0200] rev 557
- Versie 0.8.6 De mosquitto library is geen optie meer maar verplicht.
- Wed, 01 Aug 2018 22:27:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Aug 2018 22:27:58 +0200] rev 556
- Fixed compile for LCD display
- Tue, 31 Jul 2018 23:04:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 31 Jul 2018 23:04:35 +0200] rev 555
- Add fermenter uuid to the DLOG message
- Tue, 31 Jul 2018 16:42:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 31 Jul 2018 16:42:11 +0200] rev 554
- Versie 0.8.5. Implementatie product code en product naam. Implementatie DLOG MQTT berichten. Verminderde server rotocol debug berichten.
- Wed, 25 Jul 2018 20:08:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jul 2018 20:08:13 +0200] rev 553
- Updated simulator with more simulated devices.
- Wed, 25 Jul 2018 14:18:39 +0200
- by Chiel Broek <mbse@mbse.eu> [Wed, 25 Jul 2018 14:18:39 +0200] rev 552
- Add INSTALL file. Less simulator logging.
- Wed, 25 Jul 2018 12:24:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jul 2018 12:24:17 +0200] rev 551
- Versie 0.8.4. Init script toegevoegd inclusief make install.
- Mon, 23 Jul 2018 14:41:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jul 2018 14:41:21 +0200] rev 550
- Versie 0.8.3. Enkele debug console berichten verwijderd. De MQTT NCMD reboot en rebirth commando's geimplementeerd.
- Sat, 21 Jul 2018 20:40:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 21 Jul 2018 20:40:02 +0200] rev 549
- Versie 0.8.2. Node NBIRTH payload heeft nu netwerk informatie.
- Fri, 20 Jul 2018 21:37:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Jul 2018 21:37:45 +0200] rev 548
- Versie 0.8.1. Geen DDATA als fermenter uit staat. Profile JSON formaat is nu werkend.
- Thu, 19 Jul 2018 14:08:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Jul 2018 14:08:32 +0200] rev 547
- Versie 0.8.0. Fixed eerste DBIRTH fout geinitialiseerde waardes.
- Thu, 19 Jul 2018 12:55:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Jul 2018 12:55:40 +0200] rev 546
- Changed alarm message and mqtt message order
- Thu, 19 Jul 2018 12:47:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Jul 2018 12:47:52 +0200] rev 545
- Fixed compiling whithout mqtt support.
- Wed, 18 Jul 2018 13:26:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 18 Jul 2018 13:26:37 +0200] rev 544
- Versie 0.6.8. Code cleanup. Publish NDATA MQTT bericht iedere 5 minuten of als er een THB wijziging is.
- Tue, 17 Jul 2018 19:56:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 17 Jul 2018 19:56:58 +0200] rev 543
- Removed NBIRTH/NDATA nodecontrol message.
- Tue, 17 Jul 2018 11:50:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 17 Jul 2018 11:50:25 +0200] rev 542
- Code cleanup
- Mon, 16 Jul 2018 21:56:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Jul 2018 21:56:24 +0200] rev 541
- Fixed spelling error
- Mon, 16 Jul 2018 17:23:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Jul 2018 17:23:22 +0200] rev 540
- Versie 0.6.7. Globale uuid toegevoegd voor de NBIRTH payload.
- Mon, 16 Jul 2018 11:41:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Jul 2018 11:41:46 +0200] rev 539
- Changed opacity of heater and cooler lines
- Sun, 15 Jul 2018 14:39:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Jul 2018 14:39:07 +0200] rev 538
- Versie 0.6.6. Subprojecten mash, rc433 en dht11 verwijderd.
- Sun, 15 Jul 2018 14:08:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Jul 2018 14:08:19 +0200] rev 537
- Style fixes for the log chart. Removed png export button that doesn't work anymore.
- Sun, 15 Jul 2018 12:05:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Jul 2018 12:05:16 +0200] rev 536
- Versie 0.6.5. LIST LOG <unit> commando verwijderd, alleen ARCHIVE LOG <unit> is nog in gebruik. De chiller temperatuur zit nu ook in de log en grafiek.
- Sat, 14 Jul 2018 21:36:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Jul 2018 21:36:08 +0200] rev 535
- Een kleine correctie
- Sat, 14 Jul 2018 21:15:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Jul 2018 21:15:20 +0200] rev 534
- Versie 0.6.4. Aan de global setup de MQTT instellingen toegevoegd. Die zijn er ook als MQTT niet op het systeem aanwezig is. Indien het de global setup wijzigd, wordt de MQTT verbinding opnieuw gemaakt.
- Sat, 14 Jul 2018 17:21:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Jul 2018 17:21:25 +0200] rev 533
- Versie 0.6.3. MQTT device berichten alleen als een fermenter ingeschakeld is. MQTT fermenter birth en death berichhten als een fementer in of uitgeschakeld wordt. MQTT node death bericht bij normaal afsluiten van de daemon. Alle MQTT persistent berichten worden nu goed opgeruikmd.
- Fri, 18 Aug 2017 17:45:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Aug 2017 17:45:14 +0200] rev 532
- Lights always on
- Thu, 10 Aug 2017 20:32:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Aug 2017 20:32:50 +0200] rev 531
- Fan off during cooling
- Thu, 10 Aug 2017 16:27:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Aug 2017 16:27:54 +0200] rev 530
- Serious alarms are above 255
- Fri, 28 Jul 2017 13:28:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 28 Jul 2017 13:28:11 +0200] rev 529
- Added alarm LED
- Tue, 25 Jul 2017 21:08:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 25 Jul 2017 21:08:26 +0200] rev 528
- Changed 1-wire logic a little bit
- Tue, 25 Jul 2017 17:39:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 25 Jul 2017 17:39:42 +0200] rev 527
- Debug CRC error messages
- Tue, 25 Jul 2017 13:16:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 25 Jul 2017 13:16:49 +0200] rev 526
- Chiller alarm and cutoff now against the air temperature.
- Tue, 25 Jul 2017 11:43:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 25 Jul 2017 11:43:35 +0200] rev 525
- Added unit alarm flag
- Mon, 24 Jul 2017 22:55:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 24 Jul 2017 22:55:28 +0200] rev 524
- Changed extreme PID control from 5to 8 degrees.
- Sun, 23 Jul 2017 12:12:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 23 Jul 2017 12:12:58 +0200] rev 523
- Thermometers styling
- Sat, 22 Jul 2017 23:34:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 22 Jul 2017 23:34:50 +0200] rev 522
- Liveview completed the chiller thermometer.
- Sat, 22 Jul 2017 23:04:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 22 Jul 2017 23:04:44 +0200] rev 521
- Design live view page
- Thu, 06 Jul 2017 22:31:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 06 Jul 2017 22:31:01 +0200] rev 520
- Fix storing beer_idx value
- Mon, 26 Jun 2017 19:27:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Jun 2017 19:27:21 +0200] rev 519
- Version 0.6.2 released.
- Mon, 26 Jun 2017 19:21:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Jun 2017 19:21:07 +0200] rev 518
- Added chiller configuration items
- Mon, 26 Jun 2017 13:58:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 Jun 2017 13:58:11 +0200] rev 517
- Changed livescreen, now displays thermometers. The chart is loaded on request. This speeds up loading the application.
- Sun, 25 Jun 2017 13:02:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 25 Jun 2017 13:02:06 +0200] rev 516
- Don't continuous send data to domoticz
- Sat, 10 Jun 2017 23:43:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 10 Jun 2017 23:43:56 +0200] rev 515
- Only send domoticz changed values
- Sat, 10 Jun 2017 13:00:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 10 Jun 2017 13:00:14 +0200] rev 514
- Changed state messages to domoticz
- Wed, 07 Jun 2017 23:06:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 07 Jun 2017 23:06:47 +0200] rev 513
- Version 0.6.1 added support for domoticz mqtt sensors.
- Wed, 31 May 2017 16:29:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 31 May 2017 16:29:52 +0200] rev 512
- Small web page changes
- Sun, 28 May 2017 14:19:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 28 May 2017 14:19:57 +0200] rev 511
- Upgraded jqwidgets to version 4.5.2
- Fri, 19 May 2017 16:34:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 19 May 2017 16:34:21 +0200] rev 510
- Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
- Mon, 08 May 2017 20:54:51 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 May 2017 20:54:51 +0200] rev 509
- Turn off MQTT debug
- Mon, 08 May 2017 17:03:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 May 2017 17:03:25 +0200] rev 508
- Add Raspberry support in MQTT init message
- Mon, 08 May 2017 16:32:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 May 2017 16:32:43 +0200] rev 507
- Extra shutdown delay
- Mon, 08 May 2017 16:26:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 08 May 2017 16:26:02 +0200] rev 506
- New MQTT protocol
- Sat, 29 Apr 2017 17:47:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 29 Apr 2017 17:47:00 +0200] rev 505
- Small fix
- Sat, 29 Apr 2017 17:07:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 29 Apr 2017 17:07:36 +0200] rev 504
- Added some MQTT publish clear functions. Version 0.5.8
- Thu, 12 May 2016 21:43:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 12 May 2016 21:43:07 +0200] rev 503
- Better door and 12 volt detection and logging
- Wed, 11 May 2016 14:47:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 11 May 2016 14:47:27 +0200] rev 502
- Fixed some MQTT messages. Added more profile MQTT messages. Version 0.5.7
- Mon, 09 May 2016 21:37:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 09 May 2016 21:37:25 +0200] rev 501
- Bumped to version 0.5.6
- Mon, 09 May 2016 21:35:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 09 May 2016 21:35:55 +0200] rev 500
- Units now have an unique alias name so that the MQTT messages are more friendly.
- Mon, 02 May 2016 16:15:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 02 May 2016 16:15:37 +0200] rev 499
- Created mqtt sourcefiles. Use flags to trigger publish messages. The main source does not know and does not care if MQTT messages will be sent. Version 0.5.5
- Sat, 30 Apr 2016 21:25:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 30 Apr 2016 21:25:10 +0200] rev 498
- Fixed empty setpoint values
- Sat, 30 Apr 2016 21:06:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 30 Apr 2016 21:06:20 +0200] rev 497
- Compiles mosquitto code if library is found on the system. Bumped to version 0.5.4
- Sat, 26 Mar 2016 14:43:31 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Mar 2016 14:43:31 +0100] rev 496
- The FAN always runs if the unit is active. Bumped tp version 0.5.3
- Thu, 17 Mar 2016 23:28:29 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Mar 2016 23:28:29 +0100] rev 495
- Code cleanup.
- Thu, 17 Mar 2016 17:25:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Mar 2016 17:25:02 +0100] rev 494
- Fix Deadlok problem when there is only a heater or a cooler.
- Thu, 17 Mar 2016 17:10:41 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Mar 2016 17:10:41 +0100] rev 493
- Fixed server log when changed PID parameters from the web interface.
- Fri, 11 Mar 2016 20:27:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 11 Mar 2016 20:27:02 +0100] rev 492
- Changed PID code. PID parameters are now stored 3 digits instead of 2 behind the decimal point. Prevent extreme heating or cooling in Beer mode. Heat and Cool lockdown now allows the lagest value to win instead of zero them both. PID output treshold from 2% to 50%.
- Sat, 05 Mar 2016 12:50:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 05 Mar 2016 12:50:23 +0100] rev 491
- Switched PID to BOO mode for all modes.
- Fri, 26 Feb 2016 15:14:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 26 Feb 2016 15:14:00 +0100] rev 490
- Remove temporary marker.
- Fri, 26 Feb 2016 13:38:44 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 26 Feb 2016 13:38:44 +0100] rev 489
- Swapped heat/cool symbols.
- Thu, 25 Feb 2016 23:24:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Feb 2016 23:24:50 +0100] rev 488
- Small brewpanel display error fix, did not affect real hardware.
- Thu, 25 Feb 2016 23:14:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Feb 2016 23:14:46 +0100] rev 487
- Bumped to version 0.5.2 and removed the brewco subdirectory because that has been implemented as Arduino project.
- Thu, 25 Feb 2016 22:42:54 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Feb 2016 22:42:54 +0100] rev 486
- Compacted LCD display for units, allways 4 instead of 4 to 6 lines. But it's a bit more cryptic. We could write a short manual.
- Thu, 25 Feb 2016 20:26:40 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Feb 2016 20:26:40 +0100] rev 485
- Fixed compiler warning
- Thu, 25 Feb 2016 20:12:27 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 25 Feb 2016 20:12:27 +0100] rev 484
- Use user defined characters for the LCD display just like in Arduino projects.
- Mon, 22 Feb 2016 19:24:49 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Feb 2016 19:24:49 +0100] rev 483
- Merge
- Mon, 22 Feb 2016 19:22:39 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 22 Feb 2016 19:22:39 +0100] rev 482
- Simulate sensors resolution.
- Thu, 31 Dec 2015 21:03:52 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Dec 2015 21:03:52 +0100] rev 481
- Less PID debug logging.
- Thu, 31 Dec 2015 20:52:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Dec 2015 20:52:28 +0100] rev 480
- Fixed compiling on real Pi's
- Sun, 27 Dec 2015 20:52:52 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 20:52:52 +0100] rev 479
- Bild target temperature 0.1 degree higher. Removed debug log from the simulator
- Sun, 27 Dec 2015 20:21:06 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 20:21:06 +0100] rev 478
- The simulator now simulates the heater power in Watts. Changed Mash Remove? prompt.
- Sun, 27 Dec 2015 17:52:26 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 17:52:26 +0100] rev 477
- Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.
- Sun, 27 Dec 2015 17:18:58 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 17:18:58 +0100] rev 476
- Moved mash added question to after mash rest mash-in step.
- Sun, 27 Dec 2015 16:09:44 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Dec 2015 16:09:44 +0100] rev 475
- Updated several prompts. Added pump prime. Added first part of a test plan.
- Sat, 26 Dec 2015 23:35:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Dec 2015 23:35:42 +0100] rev 474
- Improved steps logging. Some small fixes in the brew automation.
- Sat, 26 Dec 2015 21:45:44 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Dec 2015 21:45:44 +0100] rev 473
- The brew state machine is complete, works but is not bugfree
- Tue, 22 Dec 2015 21:07:14 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Dec 2015 21:07:14 +0100] rev 472
- Added initial part of the brew automation.
- Tue, 22 Dec 2015 15:59:26 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Dec 2015 15:59:26 +0100] rev 471
- Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.
- Mon, 21 Dec 2015 22:53:29 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 22:53:29 +0100] rev 470
- Revised brew steps again
- Mon, 21 Dec 2015 22:36:30 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 22:36:30 +0100] rev 469
- Revised brew steps
- Mon, 21 Dec 2015 21:21:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 21:21:16 +0100] rev 468
- Removed LCD auto dim mode, the display is allways on if this program runs.
- Mon, 21 Dec 2015 21:09:36 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Dec 2015 21:09:36 +0100] rev 467
- Finished manual mode.
- Sun, 20 Dec 2015 23:26:03 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Dec 2015 23:26:03 +0100] rev 466
- Manual mode works with heat percentages.
- Sun, 20 Dec 2015 20:52:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Dec 2015 20:52:37 +0100] rev 465
- Added program locking.
- Sun, 20 Dec 2015 20:37:40 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Dec 2015 20:37:40 +0100] rev 464
- Added file copy. Move home directory detection to the main program function. During opening of the main configuration file, backups are made, 10 revisions in total.
- Thu, 17 Dec 2015 22:45:54 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Dec 2015 22:45:54 +0100] rev 463
- Completed the recipe editor.
- Wed, 16 Dec 2015 22:54:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 16 Dec 2015 22:54:53 +0100] rev 462
- Added recipe setup display menu.
- Wed, 16 Dec 2015 22:06:11 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 16 Dec 2015 22:06:11 +0100] rev 461
- Changed some prompt numbers. Added name editor.
- Tue, 15 Dec 2015 23:14:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Dec 2015 23:14:00 +0100] rev 460
- Removed some development traces.
- Tue, 15 Dec 2015 23:11:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Dec 2015 23:11:42 +0100] rev 459
- Added the beginning of the recipes editor. Added load and save of recipes file.
- Sat, 12 Dec 2015 22:17:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Dec 2015 22:17:25 +0100] rev 458
- Fixes for compiling on Raspberry.
- Sat, 12 Dec 2015 21:47:04 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Dec 2015 21:47:04 +0100] rev 457
- Updated configuration to allow hopstands.
- Sat, 12 Dec 2015 21:20:46 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Dec 2015 21:20:46 +0100] rev 456
- Build a simulated immersion chiller. It will start on SIGUSR1 signal and stop on a SIGUSR2 signal. Hardcoded is te coolwater temperature at 14 degrees celcius.
- Sat, 12 Dec 2015 19:31:35 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Dec 2015 19:31:35 +0100] rev 455
- Most parts of the simulator are working, needs some tuning.
- Fri, 11 Dec 2015 15:52:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 11 Dec 2015 15:52:37 +0100] rev 454
- Beginning of the main program loop
- Thu, 10 Dec 2015 21:34:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Dec 2015 21:34:28 +0100] rev 453
- Moved manual menu to it's own function.
- Thu, 10 Dec 2015 17:31:45 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Dec 2015 17:31:45 +0100] rev 452
- Changed device outputs and status leds.
- Thu, 10 Dec 2015 15:58:01 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Dec 2015 15:58:01 +0100] rev 451
- Manual mode added.
- Sun, 06 Dec 2015 20:23:31 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 06 Dec 2015 20:23:31 +0100] rev 450
- Added selecting output relays.
- Sun, 06 Dec 2015 19:34:39 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 06 Dec 2015 19:34:39 +0100] rev 449
- Added selecting sensors.
- Sun, 06 Dec 2015 14:29:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 06 Dec 2015 14:29:37 +0100] rev 448
- Added PID editor.
- Sun, 06 Dec 2015 12:34:44 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 06 Dec 2015 12:34:44 +0100] rev 447
- Read/Write PID parameters from configuration.
- Sat, 05 Dec 2015 21:46:22 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 05 Dec 2015 21:46:22 +0100] rev 446
- Switched to PID code from Arduino
- Fri, 04 Dec 2015 22:57:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Dec 2015 22:57:23 +0100] rev 445
- Changed internal storage of temperatures to float. Added 2 prompts. Added editors for float and integer values. Added most of brewunit edit functions.
- Fri, 04 Dec 2015 14:21:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Dec 2015 14:21:25 +0100] rev 444
- Better brew state field names.
- Wed, 02 Dec 2015 17:16:41 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 02 Dec 2015 17:16:41 +0100] rev 443
- Added programming display CGRAM. Added display of characters from CGRAM. Changed prompts to allow free prompt strings. More code for the brewsystem unit editor.
- Sat, 28 Nov 2015 21:00:29 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 28 Nov 2015 21:00:29 +0100] rev 442
- Split some sources
- Sat, 28 Nov 2015 20:15:38 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 28 Nov 2015 20:15:38 +0100] rev 441
- Added automate state file.
- Sat, 28 Nov 2015 13:47:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 28 Nov 2015 13:47:00 +0100] rev 440
- Added prompts for the LCD. Basic processing loop written.
- Fri, 27 Nov 2015 22:56:26 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 27 Nov 2015 22:56:26 +0100] rev 439
- Updated dependencies
- Fri, 27 Nov 2015 22:56:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 27 Nov 2015 22:56:00 +0100] rev 438
- Added simulator configuration.
- Fri, 27 Nov 2015 22:00:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 27 Nov 2015 22:00:23 +0100] rev 437
- Stop devices thread if the program ends.
- Thu, 26 Nov 2015 22:52:48 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Nov 2015 22:52:48 +0100] rev 436
- Fixed compiling with wiringPi
- Thu, 26 Nov 2015 22:47:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Nov 2015 22:47:42 +0100] rev 435
- More configuration items added.
- Wed, 25 Nov 2015 22:49:35 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Nov 2015 22:49:35 +0100] rev 434
- Brewco first phase development configuration structure.
- Wed, 25 Nov 2015 16:39:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Nov 2015 16:39:25 +0100] rev 433
- Bumped to version 0.5.1
- Wed, 25 Nov 2015 15:48:01 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Nov 2015 15:48:01 +0100] rev 432
- The brewpanel can now run in daemon mode or debug mode.
- Wed, 25 Nov 2015 15:30:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Nov 2015 15:30:28 +0100] rev 431
- Finished optional paneltype. Fixed all debug flags.
- Fri, 20 Nov 2015 23:29:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Nov 2015 23:29:55 +0100] rev 430
- LCD backlight fixed to off state.
- Fri, 20 Nov 2015 22:43:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Nov 2015 22:43:50 +0100] rev 429
- Dialog updates only
- Fri, 20 Nov 2015 20:49:58 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Nov 2015 20:49:58 +0100] rev 428
- Fixed parameters pasing between different layers.
- Thu, 19 Nov 2015 22:50:17 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Nov 2015 22:50:17 +0100] rev 427
- Initial part of LEDs and backlight implemented.
- Thu, 19 Nov 2015 21:17:26 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Nov 2015 21:17:26 +0100] rev 426
- Moved global bit defines to config.h
- Thu, 19 Nov 2015 20:45:09 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Nov 2015 20:45:09 +0100] rev 425
- Added LED objects to the SDL panel.
- Thu, 19 Nov 2015 15:05:19 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Nov 2015 15:05:19 +0100] rev 424
- Updated design README
- Sun, 15 Nov 2015 21:12:11 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Nov 2015 21:12:11 +0100] rev 423
- Fixed compiling for systems with wiringPi. Improved handling of udp sockets if there is no brewpanel running.
- Sat, 14 Nov 2015 23:40:51 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Nov 2015 23:40:51 +0100] rev 422
- The brewpanel works, but still needs a lot more
- Sat, 14 Nov 2015 17:00:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Nov 2015 17:00:37 +0100] rev 421
- Fixed compiling on a raspberry
- Sat, 14 Nov 2015 16:52:33 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 14 Nov 2015 16:52:33 +0100] rev 420
- The first ideas of the brewpanel simulation are in place.
- Sun, 08 Nov 2015 22:20:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 22:20:42 +0100] rev 419
- Fixed compile
- Sun, 08 Nov 2015 22:13:02 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 22:13:02 +0100] rev 418
- Reenabled code round LCD driver.
- Sun, 08 Nov 2015 21:24:52 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 21:24:52 +0100] rev 417
- The server to panel socket protocol
- Sun, 08 Nov 2015 20:47:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 20:47:55 +0100] rev 416
- Updated the panel layout.
- Sun, 08 Nov 2015 20:30:04 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 20:30:04 +0100] rev 415
- Added cursor control, but no blinking yet.
- Sun, 08 Nov 2015 17:55:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 17:55:50 +0100] rev 414
- The fontfile is now generated at the source site only to prevent the need for the imagemagic package on headless raspberries.
- Sun, 08 Nov 2015 17:50:01 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 17:50:01 +0100] rev 413
- Updated dependencies.
- Sun, 08 Nov 2015 17:49:29 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 17:49:29 +0100] rev 412
- Basic ideas to write to the simulated LCD display are in place.
- Sat, 07 Nov 2015 22:42:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Nov 2015 22:42:47 +0100] rev 411
- Added configure message about SDL presence.
- Sat, 07 Nov 2015 22:34:28 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Nov 2015 22:34:28 +0100] rev 410
- Fixed compiling on systems without SDL libraries, and they don't need tha brewpanel program.
- Sat, 07 Nov 2015 22:04:17 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Nov 2015 22:04:17 +0100] rev 409
- Added a new brewpanel program that runs on an SDL/X screen. It will be an emulator for the hardware panels. Development version 0.5.0
- Mon, 05 Oct 2015 15:21:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 Oct 2015 15:21:46 +0200] rev 408
- Make sure that a DS2413 device used as input has the output latch turned off.
- Fri, 18 Sep 2015 12:55:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Sep 2015 12:55:49 +0200] rev 407
- Removed thermometers program and directory. Version 0.4.3
- Thu, 17 Sep 2015 20:54:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 20:54:34 +0200] rev 406
- Fixed compiling on a real RPi.
- Thu, 17 Sep 2015 20:45:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 20:45:01 +0200] rev 405
- Code cleanup.
- Thu, 17 Sep 2015 20:38:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 20:38:07 +0200] rev 404
- More tooltips again.
- Thu, 17 Sep 2015 17:31:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 17:31:43 +0200] rev 403
- More tooltips
- Thu, 17 Sep 2015 17:09:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 17:09:09 +0200] rev 402
- Set sane default profile values when not using a profile.
- Thu, 17 Sep 2015 17:01:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 17:01:15 +0200] rev 401
- More fixes for profiles temperature window. Added the sliding beer/air target switch.
- Thu, 17 Sep 2015 15:52:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 15:52:46 +0200] rev 400
- Adding tooltips in the liveview screen.
- Thu, 17 Sep 2015 13:15:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 13:15:23 +0200] rev 399
- Changed frdige_mode paramater to 0..100 so we can work with a percentage.
- Thu, 17 Sep 2015 13:09:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 13:09:29 +0200] rev 398
- Fixed crash after profile is finished. Fixed error in UNIT GET output.
- Wed, 16 Sep 2015 22:05:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 16 Sep 2015 22:05:05 +0200] rev 397
- Fermentation profiles now have a low and high temperature setting so that you can use a temperture window. Each profile step can now set for beer or air temperature reference. The logfiles have an extra temperature field for this. Bumped to version 0.4.2.
- Tue, 15 Sep 2015 17:29:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 17:29:15 +0200] rev 396
- Bumped to version 0.4.1
- Tue, 15 Sep 2015 17:26:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 17:26:26 +0200] rev 395
- Switched to new device read code. Removed the incomplete support for the DS2408 1-wire chip.
- Tue, 15 Sep 2015 15:37:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 15:37:39 +0200] rev 394
- Spelling correction.
- Tue, 15 Sep 2015 14:50:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 14:50:35 +0200] rev 393
- Fixed initialisation of new GPIO RS433 and DHT11 devices.
- Tue, 15 Sep 2015 14:44:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 14:44:21 +0200] rev 392
- Fixed initialisation of new GPIO devices.
- Thu, 20 Aug 2015 21:14:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Aug 2015 21:14:44 +0200] rev 391
- Bumped from version 0.3.7 to stable version 0.4.0
- Thu, 20 Aug 2015 15:58:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Aug 2015 15:58:32 +0200] rev 390
- Graphs stepping should now work for archives and current fermenters.
- Thu, 20 Aug 2015 14:32:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Aug 2015 14:32:56 +0200] rev 389
- Graph lines logging can handle longer logfiles and has a safety limit.
- Wed, 19 Aug 2015 22:09:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 19 Aug 2015 22:09:17 +0200] rev 388
- Create a new configuration file if it doesn't exist.
- Sat, 15 Aug 2015 11:27:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 15 Aug 2015 11:27:54 +0200] rev 387
- Changed graph spline type into line type.
- Fri, 07 Aug 2015 11:29:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 07 Aug 2015 11:29:23 +0200] rev 386
- Fixed adding a new unit.
- Sun, 02 Aug 2015 14:17:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 02 Aug 2015 14:17:10 +0200] rev 385
- Fixed month display in live view and archive view. Bumped to version 0.3.7.
- Tue, 21 Jul 2015 21:20:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 21 Jul 2015 21:20:57 +0200] rev 384
- Fixed date display formatting on the web pages. Tooltips display date and time, the normal X-axis only the date.
- Sat, 27 Jun 2015 17:28:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Jun 2015 17:28:16 +0200] rev 383
- Bumped from version 0.3.5 to version 0.3.6.
- Sat, 27 Jun 2015 16:15:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Jun 2015 16:15:23 +0200] rev 382
- Moved the simulators button in the maintenance panel
- Sat, 27 Jun 2015 14:24:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Jun 2015 14:24:39 +0200] rev 381
- Only write configuration if something changed.
- Sat, 27 Jun 2015 14:08:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Jun 2015 14:08:49 +0200] rev 380
- Help screens for the commands are moved into the commands.
- Sat, 27 Jun 2015 12:52:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 27 Jun 2015 12:52:04 +0200] rev 379
- Small code cleanup
- Fri, 26 Jun 2015 13:42:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 26 Jun 2015 13:42:05 +0200] rev 378
- Fixed profile steps updateing from the web interface.
- Sun, 21 Jun 2015 20:15:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 21 Jun 2015 20:15:43 +0200] rev 377
- Bumped to version 0.3.5
- Sun, 21 Jun 2015 20:09:51 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 21 Jun 2015 20:09:51 +0200] rev 376
- Improved Archives View layout.
- Sun, 21 Jun 2015 19:51:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 21 Jun 2015 19:51:58 +0200] rev 375
- In Archives, remove .log from download and view functions. Added new Save as PDF buttons.
- Sun, 14 Jun 2015 22:48:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Jun 2015 22:48:45 +0200] rev 374
- Fixed php scripts for jqwidgets version 3.8.0
- Sun, 14 Jun 2015 20:39:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 14 Jun 2015 20:39:36 +0200] rev 373
- Upgraded jqwidgets from version 3.7.1 to version 3.8.0
- Tue, 02 Jun 2015 22:37:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 22:37:08 +0200] rev 372
- Bumped to development version 0.3.4
- Tue, 02 Jun 2015 21:52:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 21:52:48 +0200] rev 371
- Prevent undefined variables in getstate.php
- Tue, 02 Jun 2015 19:57:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 19:57:53 +0200] rev 370
- Fixed memory leak in wrconfig
- Tue, 02 Jun 2015 17:50:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 17:50:05 +0200] rev 369
- Removed debug log message
- Tue, 02 Jun 2015 17:13:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 17:13:13 +0200] rev 368
- Fix for server crash
- Tue, 02 Jun 2015 14:14:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 14:14:20 +0200] rev 367
- Fixed compiling on a real RPi
- Tue, 02 Jun 2015 14:03:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Jun 2015 14:03:46 +0200] rev 366
- Better simulator temperature reality
- Mon, 18 May 2015 21:19:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 May 2015 21:19:06 +0200] rev 365
- Version 0.3.3, still not for production. Fixed warnings when the simulator code is compiled. Slowed the simulator air temperature change 60 times. More realistic temperature changes for the heater and cooler elements. Improved logic in the simulator.
- Sun, 17 May 2015 23:23:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 17 May 2015 23:23:25 +0200] rev 364
- Tuning PID code. Samll changes on the unit web page.
- Sun, 17 May 2015 19:34:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 17 May 2015 19:34:55 +0200] rev 363
- Back to the old PID algorythm. Version 0.3.1.
- Sat, 16 May 2015 17:39:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 May 2015 17:39:30 +0200] rev 362
- Made the client-server protocol more robust. When a change to a unit is made using the web interface, the main process is stopped during the update. Splitted the PID in two PID's, one for heating and one for cooling. Adjusted the web edit scrreen for this, but there are still rough edges. Replaced the PID code, maybe this one works better for our purpose. The simulator air temperature changes on the simulator heater and cooler, but it is not realistic at all. This is a development version, do not use in production. The version is 0.3.0
- Thu, 14 May 2015 22:03:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 May 2015 22:03:35 +0200] rev 361
- Experiment with zero window
- Sun, 05 Apr 2015 11:09:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 05 Apr 2015 11:09:45 +0200] rev 360
- Leds on if any state value is set.
- Thu, 02 Apr 2015 23:24:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Apr 2015 23:24:32 +0200] rev 359
- Added ARCHIVE GET file download command.
- Thu, 02 Apr 2015 22:23:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Apr 2015 22:23:18 +0200] rev 358
- Plot room temperature on the dashboard.
- Thu, 02 Apr 2015 22:08:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Apr 2015 22:08:15 +0200] rev 357
- Added ARCHIVE LOG view.
- Thu, 02 Apr 2015 21:53:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 02 Apr 2015 21:53:28 +0200] rev 356
- Added room temperature to ARCHIVE LOG command output.
- Wed, 01 Apr 2015 23:13:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 23:13:08 +0200] rev 355
- Added logging of the room temperature.
- Wed, 01 Apr 2015 22:54:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 22:54:27 +0200] rev 354
- Fixed compile issue on non-Pi systems
- Wed, 01 Apr 2015 22:39:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 22:39:27 +0200] rev 353
- Bumped to version 0.2.13.
- Wed, 01 Apr 2015 22:37:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 22:37:28 +0200] rev 352
- Improved regular logging, disabled some debug logging.
- Wed, 01 Apr 2015 22:10:59 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 22:10:59 +0200] rev 351
- Fixed auto device update timer
- Wed, 01 Apr 2015 21:56:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 21:56:35 +0200] rev 350
- Added door and PSU sensors. Added interior light logic and switching.
- Wed, 01 Apr 2015 17:28:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 17:28:26 +0200] rev 349
- Added Fan delay logic.
- Wed, 01 Apr 2015 15:56:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 15:56:04 +0200] rev 348
- Changed Fan switch logic.
- Wed, 01 Apr 2015 15:20:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 01 Apr 2015 15:20:05 +0200] rev 347
- Completed DS2413 device code and driver.
- Thu, 26 Mar 2015 20:58:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Mar 2015 20:58:23 +0100] rev 346
- Bumped to version 0.2.12
- Thu, 26 Mar 2015 20:55:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Mar 2015 20:55:43 +0100] rev 345
- Added device direction and value in devices maintenance screen
- Thu, 26 Mar 2015 20:34:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Mar 2015 20:34:53 +0100] rev 344
- Fixed Offset label in device editor. Added code to edit pin states for DS2408 and DS2413 1-wire devices.
- Thu, 26 Mar 2015 16:40:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Mar 2015 16:40:53 +0100] rev 343
- Initialize offset to zero with new detected 1-wire devices.
- Mon, 23 Mar 2015 20:34:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Mar 2015 20:34:47 +0100] rev 342
- Added device read for the DS2413 dual channel PIO
- Fri, 20 Mar 2015 22:49:22 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Mar 2015 22:49:22 +0100] rev 341
- Possible part of DS2408 code added.
- Fri, 20 Mar 2015 22:22:18 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Mar 2015 22:22:18 +0100] rev 340
- Experimental idea
- Fri, 20 Mar 2015 20:23:12 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Mar 2015 20:23:12 +0100] rev 339
- Added defines copied from kernel source with 1-Wire device family numbers.
- Fri, 20 Mar 2015 16:56:07 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Mar 2015 16:56:07 +0100] rev 338
- Added support for all 1-wire temperature sensors that are in the Linux kernel source.
- Thu, 19 Mar 2015 20:32:23 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Mar 2015 20:32:23 +0100] rev 337
- More global device locking
- Wed, 18 Mar 2015 14:45:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 18 Mar 2015 14:45:43 +0100] rev 336
- Upgraded jqwidgets from version 3.6.0 to version 3.7.1
- Mon, 09 Mar 2015 09:42:18 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 09 Mar 2015 09:42:18 +0100] rev 335
- Added the README
- Sun, 08 Mar 2015 20:04:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Mar 2015 20:04:25 +0100] rev 334
- Added url encoding
- Sun, 08 Mar 2015 19:52:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Mar 2015 19:52:53 +0100] rev 333
- Added archives web page
- Sun, 08 Mar 2015 17:57:21 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Mar 2015 17:57:21 +0100] rev 332
- Removed unused labview files
- Sun, 08 Mar 2015 17:26:54 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Mar 2015 17:26:54 +0100] rev 331
- Added ARCHIVE LOG command
- Sun, 08 Mar 2015 16:51:19 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Mar 2015 16:51:19 +0100] rev 330
- Improved help screen
- Sun, 08 Mar 2015 16:40:25 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Mar 2015 16:40:25 +0100] rev 329
- Added ARCHIVE commands
- Sat, 07 Mar 2015 14:40:08 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Mar 2015 14:40:08 +0100] rev 328
- Fixed error
- Sat, 07 Mar 2015 14:35:12 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Mar 2015 14:35:12 +0100] rev 327
- Bumped to version 0.2.11
- Sat, 07 Mar 2015 14:32:09 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Mar 2015 14:32:09 +0100] rev 326
- Changed die() handler
- Sat, 07 Mar 2015 13:36:45 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Mar 2015 13:36:45 +0100] rev 325
- More device locks in the network server
- Sat, 07 Mar 2015 12:08:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Mar 2015 12:08:00 +0100] rev 324
- Update for newer boards
- Sat, 07 Mar 2015 11:33:10 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Mar 2015 11:33:10 +0100] rev 323
- Added extra lock
- Fri, 20 Feb 2015 16:07:39 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Feb 2015 16:07:39 +0100] rev 322
- Bumped to version 0.2.10
- Fri, 20 Feb 2015 16:05:29 +0100
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Feb 2015 16:05:29 +0100] rev 321
- Code cleanup and more conditions for debug temperature logging
- Thu, 19 Feb 2015 16:41:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Feb 2015 16:41:42 +0100] rev 320
- The web dashboard now shows just 'history' on the graph
- Thu, 19 Feb 2015 16:39:35 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Feb 2015 16:39:35 +0100] rev 319
- Actuators behind a PID now use power percentage instead of always 100%
- Thu, 19 Feb 2015 16:08:05 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Feb 2015 16:08:05 +0100] rev 318
- Better protection, fixed fridge mode.
- Thu, 19 Feb 2015 15:43:43 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Feb 2015 15:43:43 +0100] rev 317
- Simple temperature control in fridge mode.
- Thu, 19 Feb 2015 14:42:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Feb 2015 14:42:55 +0100] rev 316
- Moved pid function to separate files
- Tue, 17 Feb 2015 23:27:47 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 17 Feb 2015 23:27:47 +0100] rev 315
- Better conditional PID logging
- Mon, 16 Feb 2015 23:21:45 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Feb 2015 23:21:45 +0100] rev 314
- Restored blackout window
- Mon, 16 Feb 2015 20:41:09 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Feb 2015 20:41:09 +0100] rev 313
- Code cleanup
- Mon, 16 Feb 2015 19:52:42 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 16 Feb 2015 19:52:42 +0100] rev 312
- Added more precision to the unit low and high black window margins. Switched to PID routine from Pid without a PhD. The PID compute routine is now in the one second loop. The switch delay times are now in seconds, 0..720.
- Sun, 15 Feb 2015 23:09:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Feb 2015 23:09:00 +0100] rev 311
- PID changes and algorithm tuning.
- Sun, 15 Feb 2015 20:38:54 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Feb 2015 20:38:54 +0100] rev 310
- Added Kp, Kd and Ki settings to the units. Bumped to version 0.2.9
- Sun, 15 Feb 2015 18:21:20 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Feb 2015 18:21:20 +0100] rev 309
- Fixed logging of old pid error again
- Sun, 15 Feb 2015 18:18:44 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Feb 2015 18:18:44 +0100] rev 308
- Fixed logging of old pid error
- Sun, 15 Feb 2015 18:06:21 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 15 Feb 2015 18:06:21 +0100] rev 307
- PID old error was not set to the previous value but was always zero.
- Sat, 07 Feb 2015 23:12:55 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Feb 2015 23:12:55 +0100] rev 306
- Updated to add support for lights in a fermenter unit and a Power Supply status.
- Wed, 14 Jan 2015 13:20:16 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 14 Jan 2015 13:20:16 +0100] rev 305
- Better tab switching with a cookie
- Wed, 14 Jan 2015 12:50:12 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 14 Jan 2015 12:50:12 +0100] rev 304
- Added cookies to remember tabs
- Wed, 17 Dec 2014 15:44:58 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 17 Dec 2014 15:44:58 +0100] rev 303
- Added PING/PONG command to the server. Bumped to version 0.2.7
- Mon, 01 Dec 2014 14:15:22 +0100
- by Michiel Broek <mbroek@mbse.eu> [Mon, 01 Dec 2014 14:15:22 +0100] rev 302
- Use confirm instead of enter key when stepping to a new beer or fridge temperature
- Sat, 29 Nov 2014 21:03:31 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 29 Nov 2014 21:03:31 +0100] rev 301
- Upgraded jqwidgets to version 3.6.0
- Sat, 29 Nov 2014 16:07:34 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 29 Nov 2014 16:07:34 +0100] rev 300
- The LIST LOG command now automatic adjusts the number of output lines and resolution by calculating a reasonable interval between 1 and 60 minutes. Bumped to version 0.2.6
- Sat, 15 Nov 2014 20:35:32 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sat, 15 Nov 2014 20:35:32 +0100] rev 299
- Show heater/cooler usgae in percent on the web page. Bunped to version 0.2.5
- Tue, 11 Nov 2014 16:19:07 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Nov 2014 16:19:07 +0100] rev 298
- Fixed logfile header
- Tue, 11 Nov 2014 16:10:48 +0100
- by Michiel Broek <mbroek@mbse.eu> [Tue, 11 Nov 2014 16:10:48 +0100] rev 297
- Added usage counters to the beer logfiles. Bumped to version 0.2.4
- Sun, 02 Nov 2014 19:47:50 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 02 Nov 2014 19:47:50 +0100] rev 296
- Thinner lines for chart drawing
- Sun, 02 Nov 2014 18:00:05 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 02 Nov 2014 18:00:05 +0100] rev 295
- Added print and save as png buttons
- Sun, 02 Nov 2014 13:47:57 +0100
- by Michiel Broek <mbroek@mbse.eu> [Sun, 02 Nov 2014 13:47:57 +0100] rev 294
- Added comment
- Wed, 29 Oct 2014 20:27:37 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Oct 2014 20:27:37 +0100] rev 293
- Added usage counters
- Wed, 29 Oct 2014 14:41:00 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Oct 2014 14:41:00 +0100] rev 292
- Corrected margin labels
- Wed, 29 Oct 2014 14:36:53 +0100
- by Michiel Broek <mbroek@mbse.eu> [Wed, 29 Oct 2014 14:36:53 +0100] rev 291
- Corrected margin labels
- Sat, 25 Oct 2014 21:16:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 25 Oct 2014 21:16:25 +0200] rev 290
- Bumped to version 0.2.3
- Sat, 25 Oct 2014 21:08:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 25 Oct 2014 21:08:47 +0200] rev 289
- Added code to detect primary fermentation
- Wed, 22 Oct 2014 12:42:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 22 Oct 2014 12:42:20 +0200] rev 288
- Corrected comment
- Thu, 04 Sep 2014 14:07:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 04 Sep 2014 14:07:09 +0200] rev 287
- Make ajax response for profile state the same as the startup state
- Wed, 03 Sep 2014 15:38:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Sep 2014 15:38:01 +0200] rev 286
- The global system name was not saved or restored from the configuration file.
- Wed, 03 Sep 2014 15:29:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Sep 2014 15:29:46 +0200] rev 285
- LIST LOG sends lines per 30 minutes instead of 10 minutes.
- Wed, 03 Sep 2014 15:02:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 03 Sep 2014 15:02:09 +0200] rev 284
- Profile progress is visible in the web interface
- Tue, 02 Sep 2014 16:54:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 16:54:18 +0200] rev 283
- Bumped to version 0.2.2
- Tue, 02 Sep 2014 16:37:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 16:37:43 +0200] rev 282
- UNIT PUT command logging added.
- Tue, 02 Sep 2014 15:32:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 15:32:00 +0200] rev 281
- SIMULATOR PUT command logging added.
- Tue, 02 Sep 2014 15:14:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 15:14:53 +0200] rev 280
- PROFILE PUTS command logging added.
- Tue, 02 Sep 2014 15:07:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 15:07:34 +0200] rev 279
- PROFILE PUT command logging added.
- Tue, 02 Sep 2014 15:02:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 15:02:33 +0200] rev 278
- GLOBAL PUT command logging added.
- Tue, 02 Sep 2014 14:14:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 14:14:54 +0200] rev 277
- Fixed profile progess percentage
- Tue, 02 Sep 2014 14:10:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 02 Sep 2014 14:10:37 +0200] rev 276
- Profile progress logging now also shows the percentage done. The DEVICE PUT command logs all changed values.
- Mon, 01 Sep 2014 22:06:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 01 Sep 2014 22:06:39 +0200] rev 275
- Better profile progress logging
- Mon, 01 Sep 2014 15:43:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 01 Sep 2014 15:43:13 +0200] rev 274
- Added logging if profile state is changed via the web interface. Log profile progress each half hour in syslog. Profile resttime steps 0 hours is allowed, meaning resttime or steptime must be set for a valid step. Updated the helptext on the web page.
- Sun, 31 Aug 2014 18:25:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 31 Aug 2014 18:25:32 +0200] rev 273
- Fixed unit edit heater/cooler delay values. Heater and Cooler start/stop now use a different algorithm.
- Sun, 31 Aug 2014 17:51:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 31 Aug 2014 17:51:04 +0200] rev 272
- Added Heater and Cooler delay edit fields. Added more checks on entered data in the units edit screen.
- Sat, 30 Aug 2014 22:15:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 30 Aug 2014 22:15:54 +0200] rev 271
- Specified date formatting
- Sat, 30 Aug 2014 13:06:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 30 Aug 2014 13:06:07 +0200] rev 270
- The PID commands have an adjustable delay, default 5 minutes
- Tue, 26 Aug 2014 14:45:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Aug 2014 14:45:03 +0200] rev 269
- All web screens now show the program name and version
- Tue, 26 Aug 2014 13:50:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 26 Aug 2014 13:50:35 +0200] rev 268
- All syslog logging only to LOG_NOTICE
- Mon, 25 Aug 2014 21:33:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 25 Aug 2014 21:33:57 +0200] rev 267
- Don't log debug pid messages if there is no error difference
- Mon, 25 Aug 2014 20:47:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 25 Aug 2014 20:47:30 +0200] rev 266
- Better log output for web graphs. Webgraphs can now display heater and cooler usage.
- Sun, 24 Aug 2014 23:01:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 24 Aug 2014 23:01:32 +0200] rev 265
- More math for the simulator. Web interface changes for heater in graph.
- Sun, 24 Aug 2014 14:41:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 24 Aug 2014 14:41:31 +0200] rev 264
- LIST LOG also output lines on state changes
- Sat, 23 Aug 2014 23:43:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Aug 2014 23:43:11 +0200] rev 263
- Fixed stdout debug messages
- Sat, 23 Aug 2014 23:38:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Aug 2014 23:38:18 +0200] rev 262
- Simulation of fridge cold loss to the room added for testing.
- Sat, 23 Aug 2014 12:48:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Aug 2014 12:48:55 +0200] rev 261
- Fixed cooler_size bug
- Sat, 23 Aug 2014 12:33:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 23 Aug 2014 12:33:14 +0200] rev 260
- Added Simulator editor
- Fri, 22 Aug 2014 17:12:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 22 Aug 2014 17:12:42 +0200] rev 259
- Added framework for a simulation of a fridge with heater to use as controlled fermentor
- Wed, 20 Aug 2014 22:15:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 22:15:12 +0200] rev 258
- Updated web dashboard layout
- Wed, 20 Aug 2014 17:42:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 17:42:35 +0200] rev 257
- Automatic ajax updates of radio buttons
- Wed, 20 Aug 2014 14:01:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 14:01:15 +0200] rev 256
- Slowdown room temperature/humidity updates to 60 seconds
- Wed, 20 Aug 2014 13:51:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 13:51:44 +0200] rev 255
- Added function send_array_check
- Wed, 20 Aug 2014 13:10:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 13:10:10 +0200] rev 254
- Units editor uses array commands
- Wed, 20 Aug 2014 13:02:12 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 13:02:12 +0200] rev 253
- Global and profile editor use array commands
- Wed, 20 Aug 2014 12:46:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 12:46:31 +0200] rev 252
- Device editor uses array commands
- Wed, 20 Aug 2014 12:02:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 20 Aug 2014 12:02:49 +0200] rev 251
- Made a function to send arrays to the server. The room temperature and humidity are now displayed at once when the dashboard is loaded.
- Mon, 18 Aug 2014 20:00:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Aug 2014 20:00:30 +0200] rev 250
- Bumped to version 0.2.0
- Mon, 18 Aug 2014 19:58:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Aug 2014 19:58:56 +0200] rev 249
- Fixed conditional compile
- Mon, 18 Aug 2014 19:55:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Aug 2014 19:55:52 +0200] rev 248
- Removed two system menus that would not work correctly. All panel menus are complete now.
- Mon, 18 Aug 2014 19:44:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Aug 2014 19:44:41 +0200] rev 247
- Added profile panel menus and system panel menus
- Mon, 18 Aug 2014 16:13:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Aug 2014 16:13:56 +0200] rev 246
- Setting fridge and beer temperature from the panel implemented
- Mon, 18 Aug 2014 15:10:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 18 Aug 2014 15:10:09 +0200] rev 245
- You can now safely add and remove units on a running system.
- Sat, 16 Aug 2014 17:11:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Aug 2014 17:11:09 +0200] rev 244
- Selecting units in setup does now work. Menu select variables are protected with thread locking.
- Sat, 16 Aug 2014 15:38:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 16 Aug 2014 15:38:45 +0200] rev 243
- Fixed add unit web interface
- Fri, 15 Aug 2014 14:43:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 15 Aug 2014 14:43:32 +0200] rev 242
- Fixed conditionals on systems without wiringPi.
- Fri, 15 Aug 2014 14:38:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 15 Aug 2014 14:38:32 +0200] rev 241
- Added thread locks to all LCD access functions. This seems to have fixed the LCD corruption problems.
- Thu, 14 Aug 2014 22:43:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Aug 2014 22:43:41 +0200] rev 240
- Added thread locks for device processing
- Thu, 14 Aug 2014 22:02:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Aug 2014 22:02:33 +0200] rev 239
- Increase priority for the devices thread
- Thu, 14 Aug 2014 21:50:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 14 Aug 2014 21:50:38 +0200] rev 238
- Added more panel menus
- Wed, 13 Aug 2014 22:02:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 22:02:14 +0200] rev 237
- Add a sane default for profile precessing.
- Wed, 13 Aug 2014 21:48:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 21:48:57 +0200] rev 236
- Bumped to version 0.1.0
- Wed, 13 Aug 2014 21:41:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 21:41:10 +0200] rev 235
- Changed a lot of loglevels
- Wed, 13 Aug 2014 21:21:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 21:21:55 +0200] rev 234
- Added loggin when a device is switched on or off in beer/fridge/profile mode.
- Wed, 13 Aug 2014 21:04:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 21:04:29 +0200] rev 233
- Added code to control the Fan.
- Wed, 13 Aug 2014 20:47:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 20:47:00 +0200] rev 232
- Fix new device creation
- Wed, 13 Aug 2014 19:58:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 19:58:01 +0200] rev 231
- Spelling errwror
- Wed, 13 Aug 2014 19:48:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 19:48:20 +0200] rev 230
- Added logging for wrong LCD buffer allocations
- Wed, 13 Aug 2014 19:40:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 19:40:01 +0200] rev 229
- Move some public functions to private functions
- Wed, 13 Aug 2014 19:14:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 19:14:01 +0200] rev 228
- Fixed stepping down in LCD screens.
- Wed, 13 Aug 2014 17:37:59 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 17:37:59 +0200] rev 227
- Remove debug log information about regular configuration saving.
- Wed, 13 Aug 2014 14:10:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 13 Aug 2014 14:10:57 +0200] rev 226
- Added debug log info to lcd_buf functions.
- Tue, 12 Aug 2014 21:26:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Aug 2014 21:26:26 +0200] rev 225
- Changed CSS colors for the LED's. Removed the old LED's.
- Tue, 12 Aug 2014 17:54:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Aug 2014 17:54:48 +0200] rev 224
- LED's using css styling.
- Tue, 12 Aug 2014 13:09:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Aug 2014 13:09:50 +0200] rev 223
- Removed LCD shadow copy buffer.
- Tue, 12 Aug 2014 12:49:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Aug 2014 12:49:26 +0200] rev 222
- Increased buffersize
- Tue, 12 Aug 2014 12:42:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 12 Aug 2014 12:42:15 +0200] rev 221
- Fixed end of profile steps, didn't go to the PROFILE_DONE state.
- Mon, 11 Aug 2014 19:17:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Aug 2014 19:17:32 +0200] rev 220
- Make sure we don't read the DHT11 within 2 seconds.
- Mon, 11 Aug 2014 18:38:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Aug 2014 18:38:57 +0200] rev 219
- Added profile running and steps handling.
- Mon, 11 Aug 2014 12:34:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Aug 2014 12:34:49 +0200] rev 218
- Added profile state ABORT
- Mon, 11 Aug 2014 12:34:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Aug 2014 12:34:05 +0200] rev 217
- Added profile state ABORT
- Mon, 11 Aug 2014 11:50:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Aug 2014 11:50:23 +0200] rev 216
- LED flash when panel enter key is pressed long.
- Mon, 11 Aug 2014 11:09:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 11 Aug 2014 11:09:23 +0200] rev 215
- Do not use 100% cpu on a system without devices
- Sun, 10 Aug 2014 23:36:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 23:36:22 +0200] rev 214
- Added a bunch of panel menus
- Sun, 10 Aug 2014 21:22:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 21:22:17 +0200] rev 213
- Code cleanup, streamlined error messages.
- Sun, 10 Aug 2014 20:01:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 20:01:17 +0200] rev 212
- Code cleanup
- Sun, 10 Aug 2014 17:43:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 17:43:33 +0200] rev 211
- Updated dependencies
- Sun, 10 Aug 2014 17:42:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 17:42:02 +0200] rev 210
- Removed debugging output
- Sun, 10 Aug 2014 17:25:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 17:25:50 +0200] rev 209
- Added offset value for sensor that need it
- Sun, 10 Aug 2014 16:56:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 16:56:22 +0200] rev 208
- Added room temperature and humidity to the web interface
- Sun, 10 Aug 2014 16:17:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 16:17:03 +0200] rev 207
- Added global setup
- Sun, 10 Aug 2014 14:45:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 14:45:11 +0200] rev 206
- Added GLOBAL GET and GLOBAL PUT commands.
- Sun, 10 Aug 2014 13:26:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 13:26:35 +0200] rev 205
- Start initial menu setup
- Sun, 10 Aug 2014 12:09:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 10 Aug 2014 12:09:07 +0200] rev 204
- Fixed LCD display updates. Better key routines.
- Sat, 09 Aug 2014 23:13:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 23:13:56 +0200] rev 203
- Added DHT11 sensor code
- Sat, 09 Aug 2014 22:48:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 22:48:21 +0200] rev 202
- Code added on the wrong machine
- Sat, 09 Aug 2014 21:43:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 21:43:09 +0200] rev 201
- Updated dependencies
- Sat, 09 Aug 2014 21:42:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 21:42:28 +0200] rev 200
- Added first panel key routines. The LCD display steps manual only and has a 2 minutes backlight timeout.
- Sat, 09 Aug 2014 17:24:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 17:24:32 +0200] rev 199
- Added panel thread
- Sat, 09 Aug 2014 17:06:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 17:06:25 +0200] rev 198
- Added dependencies for panel
- Sat, 09 Aug 2014 16:56:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 16:56:31 +0200] rev 197
- Added panel sourcecode files
- Sat, 09 Aug 2014 11:29:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 09 Aug 2014 11:29:02 +0200] rev 196
- Code cleanup
- Fri, 08 Aug 2014 23:07:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 08 Aug 2014 23:07:44 +0200] rev 195
- Reset output when a different profile is selected. Better startup logging about the unit state. Added Beer, Fridge and partial Profile settings from the liveview weeb screen.
- Thu, 07 Aug 2014 22:06:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Aug 2014 22:06:18 +0200] rev 194
- Added some ideas about profiles.
- Thu, 07 Aug 2014 21:19:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Aug 2014 21:19:30 +0200] rev 193
- Auto refresh LED's state added.
- Thu, 07 Aug 2014 20:34:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Aug 2014 20:34:07 +0200] rev 192
- Added PROFILE GET and PROFILE PUT commands. Adjusted the web interface
- Thu, 07 Aug 2014 19:38:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Aug 2014 19:38:30 +0200] rev 191
- Client/Server communication is now almost final
- Thu, 07 Aug 2014 16:44:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Aug 2014 16:44:53 +0200] rev 190
- Removed private directory
- Thu, 07 Aug 2014 14:20:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 07 Aug 2014 14:20:11 +0200] rev 189
- Init logfile when a unit is turned on. Added comments for profile processing.
- Tue, 05 Aug 2014 22:50:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 22:50:33 +0200] rev 188
- Added heat/cool state to the LCD display
- Tue, 05 Aug 2014 22:29:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 22:29:22 +0200] rev 187
- Updated conditional defines and dependencies
- Tue, 05 Aug 2014 21:46:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 21:46:49 +0200] rev 186
- Added setting of initial target temperature
- Tue, 05 Aug 2014 21:33:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 21:33:06 +0200] rev 185
- PID finetuning
- Tue, 05 Aug 2014 16:24:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 16:24:17 +0200] rev 184
- Fixed switching problems
- Tue, 05 Aug 2014 15:45:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 15:45:23 +0200] rev 183
- Updated dependencies
- Tue, 05 Aug 2014 15:44:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 15:44:29 +0200] rev 182
- Removing units thread
- Tue, 05 Aug 2014 11:57:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 05 Aug 2014 11:57:05 +0200] rev 181
- Fixed double commands to 433 MHz switches, they did not switch.
- Mon, 04 Aug 2014 23:36:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Aug 2014 23:36:05 +0200] rev 180
- Add missing sources
- Mon, 04 Aug 2014 23:34:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Aug 2014 23:34:22 +0200] rev 179
- Added PID implementation and 433 MHz radio control switches. Not reliable yet.
- Mon, 04 Aug 2014 19:31:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Aug 2014 19:31:03 +0200] rev 178
- Web - server communication for switches improved.
- Mon, 04 Aug 2014 15:25:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Aug 2014 15:25:13 +0200] rev 177
- Added some comments
- Mon, 04 Aug 2014 15:18:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 04 Aug 2014 15:18:29 +0200] rev 176
- Initial code for a simple PID controller.
- Sun, 03 Aug 2014 22:49:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 03 Aug 2014 22:49:33 +0200] rev 175
- Units editing is more or less complete. Changed structures for heating, cooling, fan and door. Updated the web interface to confuigure all these things.
- Sat, 02 Aug 2014 22:33:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 02 Aug 2014 22:33:15 +0200] rev 174
- Added device configuration
- Fri, 01 Aug 2014 22:53:58 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 22:53:58 +0200] rev 173
- More style updates
- Fri, 01 Aug 2014 22:21:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 22:21:57 +0200] rev 172
- Added style to the maintenance menu
- Fri, 01 Aug 2014 21:40:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 21:40:02 +0200] rev 171
- Ajax screen updates now use a single call to the server
- Fri, 01 Aug 2014 16:13:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 16:13:55 +0200] rev 170
- A bit of code cleanup
- Fri, 01 Aug 2014 14:45:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 14:45:32 +0200] rev 169
- Small fix for NA values
- Fri, 01 Aug 2014 14:42:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 14:42:44 +0200] rev 168
- Temperature auto refresh and some layout improvements.
- Fri, 01 Aug 2014 11:45:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 11:45:35 +0200] rev 167
- Fixed GET AIR|BEER commands. Save configuration every 30 minutes.
- Fri, 01 Aug 2014 09:25:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 01 Aug 2014 09:25:38 +0200] rev 166
- Forgot some close functions so tha program ran out of file descriptors. Better loggin for writing the configuration.
- Thu, 31 Jul 2014 23:57:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 23:57:04 +0200] rev 165
- Removed old 1-wire bus
- Thu, 31 Jul 2014 23:39:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 23:39:11 +0200] rev 164
- Threads partly working via new devices interface
- Thu, 31 Jul 2014 22:15:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 22:15:22 +0200] rev 163
- LIST BUS now displays the new devices table. Adjusted the web screen
- Thu, 31 Jul 2014 21:04:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 21:04:06 +0200] rev 162
- Added Raspberry GPIO devices
- Thu, 31 Jul 2014 19:29:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 19:29:54 +0200] rev 161
- Small fixes for device configuration
- Thu, 31 Jul 2014 17:52:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 17:52:41 +0200] rev 160
- Fixed wrong includes
- Thu, 31 Jul 2014 17:48:59 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 17:48:59 +0200] rev 159
- Updated dependencies
- Thu, 31 Jul 2014 17:44:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 17:44:50 +0200] rev 158
- Added device configuration
- Thu, 31 Jul 2014 13:43:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 31 Jul 2014 13:43:09 +0200] rev 157
- Added GET AIR, GET BEER, GET TARGET commands
- Wed, 30 Jul 2014 23:06:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 23:06:46 +0200] rev 156
- Update LCD even when unit is off
- Wed, 30 Jul 2014 22:57:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 22:57:48 +0200] rev 155
- Unit mode can switch between OFF and NONE.
- Wed, 30 Jul 2014 19:39:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 19:39:50 +0200] rev 154
- Added style to radiobuttons
- Wed, 30 Jul 2014 19:05:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 19:05:11 +0200] rev 153
- Added the framework for the units editor. In the dashboard the radio selector buttons are converteed to jqwidgets radiobuttons.
- Wed, 30 Jul 2014 15:27:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 15:27:37 +0200] rev 152
- Merged
- Wed, 30 Jul 2014 15:26:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 15:26:29 +0200] rev 151
- Improved dashboard panel style, added (ugly) led's
- Wed, 30 Jul 2014 10:41:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 30 Jul 2014 10:41:54 +0200] rev 150
- Removed old thermferm.log file
- Tue, 29 Jul 2014 21:33:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 21:33:38 +0200] rev 149
- More small fixes, new dependencies generated
- Tue, 29 Jul 2014 21:31:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 21:31:36 +0200] rev 148
- new .h file
- Tue, 29 Jul 2014 21:30:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 21:30:18 +0200] rev 147
- Code cleanup and fixes
- Tue, 29 Jul 2014 21:12:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 21:12:43 +0200] rev 146
- Code fixes and cleanup
- Tue, 29 Jul 2014 21:05:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 21:05:40 +0200] rev 145
- Code cleanup
- Tue, 29 Jul 2014 20:42:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 20:42:02 +0200] rev 144
- Removed code dependencies to mosquitto and owfs
- Tue, 29 Jul 2014 20:11:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Jul 2014 20:11:23 +0200] rev 143
- Removed mosquitto dependency
- Mon, 28 Jul 2014 21:41:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 28 Jul 2014 21:41:03 +0200] rev 142
- Bumped to version 0.0.11. Added owserver C api.
- Sun, 27 Jul 2014 21:04:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Jul 2014 21:04:57 +0200] rev 141
- Small fix
- Sun, 27 Jul 2014 17:06:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 27 Jul 2014 17:06:08 +0200] rev 140
- Implemented PROFILE PUTS command
- Sat, 26 Jul 2014 22:26:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Jul 2014 22:26:30 +0200] rev 139
- Better screen name
- Sat, 26 Jul 2014 22:18:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Jul 2014 22:18:44 +0200] rev 138
- Added DEL PROFILE command
- Sat, 26 Jul 2014 17:30:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Jul 2014 17:30:47 +0200] rev 137
- Profiles can be managed via the web interface
- Sat, 26 Jul 2014 13:18:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Jul 2014 13:18:00 +0200] rev 136
- Profiles now have a busy state
- Fri, 25 Jul 2014 23:28:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 25 Jul 2014 23:28:44 +0200] rev 135
- Removed obsolete files
- Fri, 25 Jul 2014 23:27:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 25 Jul 2014 23:27:08 +0200] rev 134
- Redesigned the web interface, one single app is too slow. The main dashboard will be a shiny ajax driven page, the setup pages will be simple and php only. Keep It Simple, Stupid.
- Thu, 24 Jul 2014 23:14:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Jul 2014 23:14:20 +0200] rev 133
- Fixed compiling on systems with wiringpi libs
- Thu, 24 Jul 2014 23:11:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Jul 2014 23:11:28 +0200] rev 132
- Added some profile commands to the server. Profile names can be changed from the web interface. Removed obsolete commands.
- Thu, 24 Jul 2014 20:45:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Jul 2014 20:45:15 +0200] rev 131
- Always use uuid to select units and remove numeric record id's.
- Thu, 24 Jul 2014 17:42:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Jul 2014 17:42:34 +0200] rev 130
- Added maintenance tabs for units and profiles
- Wed, 23 Jul 2014 21:34:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Jul 2014 21:34:02 +0200] rev 129
- Removed sorting of 1-Wire devices because the busy indicator doesn't dissapear
- Wed, 23 Jul 2014 21:18:05 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Jul 2014 21:18:05 +0200] rev 128
- Added loading of grid.sort
- Wed, 23 Jul 2014 21:14:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Jul 2014 21:14:20 +0200] rev 127
- Added the maintenance 1-Wire display tab
- Wed, 23 Jul 2014 17:12:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Jul 2014 17:12:18 +0200] rev 126
- Added getbus script
- Wed, 23 Jul 2014 17:07:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Jul 2014 17:07:29 +0200] rev 125
- Fixed LIST BUS output
- Wed, 23 Jul 2014 16:49:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Jul 2014 16:49:37 +0200] rev 124
- Added maintenance tabs and extended server output
- Tue, 22 Jul 2014 23:14:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Jul 2014 23:14:19 +0200] rev 123
- Now uses the real data for the chart
- Tue, 22 Jul 2014 20:15:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Jul 2014 20:15:09 +0200] rev 122
- Added fermentor maintenance windows
- Tue, 22 Jul 2014 17:56:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Jul 2014 17:56:56 +0200] rev 121
- Initial setup to draw charts
- Mon, 21 Jul 2014 22:19:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Jul 2014 22:19:24 +0200] rev 120
- Added LIST LOG command
- Mon, 21 Jul 2014 19:31:28 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Jul 2014 19:31:28 +0200] rev 119
- Removed obsolete file
- Mon, 21 Jul 2014 17:16:08 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 21 Jul 2014 17:16:08 +0200] rev 118
- Added maintenance window with only two buttons yet
- Sun, 20 Jul 2014 23:09:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 20 Jul 2014 23:09:50 +0200] rev 117
- Initial setup of wqwidgets
- Fri, 18 Jul 2014 22:24:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Jul 2014 22:24:03 +0200] rev 116
- Added jquery script. Added radio buttons for unit mode
- Fri, 18 Jul 2014 16:57:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Jul 2014 16:57:27 +0200] rev 115
- New screen layout
- Fri, 18 Jul 2014 16:33:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Jul 2014 16:33:41 +0200] rev 114
- Removed toolkit
- Thu, 17 Jul 2014 21:19:22 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Jul 2014 21:19:22 +0200] rev 113
- Created control panel layout
- Wed, 16 Jul 2014 13:42:14 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 16 Jul 2014 13:42:14 +0200] rev 112
- Added buttons
- Sun, 13 Jul 2014 22:13:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 13 Jul 2014 22:13:13 +0200] rev 111
- Added missing conditional
- Sun, 13 Jul 2014 22:11:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 13 Jul 2014 22:11:46 +0200] rev 110
- Was not added
- Sun, 13 Jul 2014 21:01:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 13 Jul 2014 21:01:18 +0200] rev 109
- Updated dependencies
- Sun, 13 Jul 2014 21:00:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 13 Jul 2014 21:00:01 +0200] rev 108
- New rotating LCD display
- Sun, 13 Jul 2014 17:34:41 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 13 Jul 2014 17:34:41 +0200] rev 107
- Updated dependencies, bumped to version 0.0.10
- Sun, 13 Jul 2014 17:31:45 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 13 Jul 2014 17:31:45 +0200] rev 106
- Added .h files
- Sat, 12 Jul 2014 23:50:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Jul 2014 23:50:48 +0200] rev 105
- Started code of roulating lcd display
- Sat, 12 Jul 2014 22:32:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Jul 2014 22:32:29 +0200] rev 104
- Added units logging
- Sat, 12 Jul 2014 21:59:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Jul 2014 21:59:19 +0200] rev 103
- Added the mash sourcecode, this does nothing useful yet.
- Sat, 12 Jul 2014 19:22:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Jul 2014 19:22:13 +0200] rev 102
- Units can display the temperature
- Sat, 12 Jul 2014 17:57:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 12 Jul 2014 17:57:53 +0200] rev 101
- Made temperature sensors working in the units
- Fri, 11 Jul 2014 22:53:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 11 Jul 2014 22:53:33 +0200] rev 100
- Basic web idea
- Fri, 11 Jul 2014 13:29:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 11 Jul 2014 13:29:26 +0200] rev 99
- Cleanup
- Thu, 10 Jul 2014 11:46:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 10 Jul 2014 11:46:27 +0200] rev 98
- Start over again with web pages
- Tue, 08 Jul 2014 23:53:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 08 Jul 2014 23:53:04 +0200] rev 97
- Added initial set for the thermferm web interface
- Mon, 07 Jul 2014 22:51:59 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 07 Jul 2014 22:51:59 +0200] rev 96
- Fixed NULL writing
- Mon, 07 Jul 2014 22:31:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 07 Jul 2014 22:31:07 +0200] rev 95
- Removed old brewPi settings
- Mon, 07 Jul 2014 21:15:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 07 Jul 2014 21:15:44 +0200] rev 94
- Fixed possible one character short on LCD. Added environment air temperature sensor
- Fri, 04 Jul 2014 23:37:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Jul 2014 23:37:53 +0200] rev 93
- Added units processing thread
- Fri, 04 Jul 2014 20:00:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 04 Jul 2014 20:00:19 +0200] rev 92
- Added profiles configuration
- Thu, 03 Jul 2014 23:11:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 03 Jul 2014 23:11:44 +0200] rev 91
- Added fermenting profiles to the configuration
- Wed, 02 Jul 2014 22:41:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 02 Jul 2014 22:41:31 +0200] rev 90
- Added profile parameters
- Wed, 02 Jul 2014 22:17:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 02 Jul 2014 22:17:10 +0200] rev 89
- Added profile states
- Wed, 02 Jul 2014 22:09:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 02 Jul 2014 22:09:35 +0200] rev 88
- Added SET commands
- Wed, 02 Jul 2014 17:57:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 02 Jul 2014 17:57:06 +0200] rev 87
- Added unit command and list unit command
- Tue, 01 Jul 2014 23:14:57 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 01 Jul 2014 23:14:57 +0200] rev 86
- Using final user paths for log, configuration and profiles
- Tue, 01 Jul 2014 21:53:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 01 Jul 2014 21:53:03 +0200] rev 85
- Changes to the 1-wire bus listing layout
- Tue, 01 Jul 2014 21:41:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 01 Jul 2014 21:41:31 +0200] rev 84
- Can list the 1-wire bus
- Thu, 26 Jun 2014 21:26:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Jun 2014 21:26:33 +0200] rev 83
- Removed old ascii configuration
- Thu, 26 Jun 2014 21:00:21 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Jun 2014 21:00:21 +0200] rev 82
- Corrected a spelling error in the xml parser
- Thu, 26 Jun 2014 20:55:34 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Jun 2014 20:55:34 +0200] rev 81
- Added list command
- Thu, 26 Jun 2014 20:00:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 26 Jun 2014 20:00:00 +0200] rev 80
- Switched to xml configuration
- Wed, 25 Jun 2014 19:42:03 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jun 2014 19:42:03 +0200] rev 79
- Added uuid library
- Wed, 25 Jun 2014 17:18:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jun 2014 17:18:01 +0200] rev 78
- Added lcd i2c address to xml configuration
- Wed, 25 Jun 2014 16:56:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jun 2014 16:56:09 +0200] rev 77
- Added old configuration to write xml config
- Wed, 25 Jun 2014 16:16:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 25 Jun 2014 16:16:47 +0200] rev 76
- Can now write the fermenter units configurations
- Tue, 24 Jun 2014 22:38:46 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 24 Jun 2014 22:38:46 +0200] rev 75
- Writes a basic xml configuration next to the plain ascii config file
- Tue, 24 Jun 2014 20:21:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 24 Jun 2014 20:21:07 +0200] rev 74
- Reinstalled threads
- Mon, 23 Jun 2014 22:50:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jun 2014 22:50:29 +0200] rev 73
- Changed include files
- Mon, 23 Jun 2014 22:41:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jun 2014 22:41:09 +0200] rev 72
- Final steps removing rc-switch from thermferm
- Mon, 23 Jun 2014 22:16:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jun 2014 22:16:29 +0200] rev 71
- Removed rc-switch
- Mon, 23 Jun 2014 20:01:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jun 2014 20:01:27 +0200] rev 70
- Small fix for LCD output
- Mon, 23 Jun 2014 19:56:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jun 2014 19:56:54 +0200] rev 69
- Fixed compilation
- Mon, 23 Jun 2014 19:53:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 23 Jun 2014 19:53:33 +0200] rev 68
- Added first part of out own protocol
- Sun, 22 Jun 2014 22:11:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 22 Jun 2014 22:11:33 +0200] rev 67
- Fixed makefile
- Fri, 20 Jun 2014 17:42:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 20 Jun 2014 17:42:36 +0200] rev 66
- Compiles with 1-wire bus on PC hardware
- Thu, 19 Jun 2014 15:49:29 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Jun 2014 15:49:29 +0200] rev 65
- Removed double logging hack
- Thu, 19 Jun 2014 15:47:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Jun 2014 15:47:16 +0200] rev 64
- Write loglines only every 60 seconds
- Thu, 19 Jun 2014 14:32:33 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 19 Jun 2014 14:32:33 +0200] rev 63
- Added extra decimal for temperature output
- Fri, 13 Jun 2014 17:43:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 13 Jun 2014 17:43:37 +0200] rev 62
- Fixed possible memory leaks
- Wed, 04 Jun 2014 16:00:35 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 04 Jun 2014 16:00:35 +0200] rev 61
- Simple detection for the same log lines
- Sat, 31 May 2014 12:00:40 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 31 May 2014 12:00:40 +0200] rev 60
- Code fix
- Sat, 31 May 2014 11:48:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 31 May 2014 11:48:49 +0200] rev 59
- Updated dependencies
- Sat, 31 May 2014 11:47:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 31 May 2014 11:47:23 +0200] rev 58
- Fixed compilation without wiringpi
- Sat, 31 May 2014 11:39:13 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 31 May 2014 11:39:13 +0200] rev 57
- Bumped version, added libxml2 tests to configure
- Tue, 27 May 2014 23:20:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 27 May 2014 23:20:37 +0200] rev 56
- Workaround for empty environment at system boot
- Tue, 27 May 2014 22:24:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 27 May 2014 22:24:39 +0200] rev 55
- If /home/mbroek is not set, assume root user.
- Mon, 26 May 2014 23:25:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 26 May 2014 23:25:48 +0200] rev 54
- More configuration changes. Writing settings implemented.
- Sun, 25 May 2014 23:29:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 25 May 2014 23:29:07 +0200] rev 53
- Added writing configuration
- Sun, 25 May 2014 22:37:23 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 25 May 2014 22:37:23 +0200] rev 52
- Code cleanup
- Sun, 25 May 2014 22:06:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 25 May 2014 22:06:56 +0200] rev 51
- Removed library, bumped to version 0.0.7
- Sun, 25 May 2014 16:39:54 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 25 May 2014 16:39:54 +0200] rev 50
- Log allways
- Fri, 23 May 2014 14:09:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 23 May 2014 14:09:07 +0200] rev 49
- Fixed temperature logging, added some commands
- Thu, 22 May 2014 13:54:52 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 22 May 2014 13:54:52 +0200] rev 48
- Single client server works
- Tue, 20 May 2014 22:42:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 20 May 2014 22:42:26 +0200] rev 47
- Updated dependencies
- Tue, 20 May 2014 22:40:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 20 May 2014 22:40:16 +0200] rev 46
- More client/server communications
- Tue, 20 May 2014 17:07:32 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 20 May 2014 17:07:32 +0200] rev 45
- Mirror LCD display on the webpage works
- Mon, 19 May 2014 17:49:04 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 19 May 2014 17:49:04 +0200] rev 44
- Server communication works
- Sun, 18 May 2014 22:56:43 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 18 May 2014 22:56:43 +0200] rev 43
- Initial server code added
- Sun, 18 May 2014 21:27:07 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 18 May 2014 21:27:07 +0200] rev 42
- Corrected missing and obsolete files
- Sun, 18 May 2014 21:24:55 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 18 May 2014 21:24:55 +0200] rev 41
- Code preparation for client/server communication
- Sat, 17 May 2014 23:06:39 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 17 May 2014 23:06:39 +0200] rev 40
- Prepared unix socket communication
- Sat, 17 May 2014 10:50:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 17 May 2014 10:50:16 +0200] rev 39
- More Makefiles made simpeler. Version 0.0.6
- Sat, 17 May 2014 10:41:49 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 17 May 2014 10:41:49 +0200] rev 38
- Simplified Makefile
- Wed, 14 May 2014 23:40:38 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 14 May 2014 23:40:38 +0200] rev 37
- Code cleanup
- Tue, 13 May 2014 16:46:36 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 13 May 2014 16:46:36 +0200] rev 36
- Don't block with a missing DHT11 sensor
- Tue, 13 May 2014 16:33:47 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 13 May 2014 16:33:47 +0200] rev 35
- Mosquitto init does several tries before giving up. The DHT11 sensor now uses a temperature offset too.
- Mon, 12 May 2014 19:45:11 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 12 May 2014 19:45:11 +0200] rev 34
- Added lock/pid file
- Fri, 09 May 2014 22:29:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 09 May 2014 22:29:42 +0200] rev 33
- Added user log with temperatures and cooler state
- Fri, 09 May 2014 20:39:01 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 09 May 2014 20:39:01 +0200] rev 32
- Added user log function for program data
- Thu, 08 May 2014 22:36:51 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 08 May 2014 22:36:51 +0200] rev 31
- Added library code to read DHT11 temperature/humidity sensor
- Thu, 08 May 2014 15:09:56 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 08 May 2014 15:09:56 +0200] rev 30
- Fix for conditional defines for wiringPi library
- Wed, 07 May 2014 23:01:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 07 May 2014 23:01:18 +0200] rev 29
- Improved rc-switch library to be more flexible.
- Tue, 06 May 2014 21:37:06 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 06 May 2014 21:37:06 +0200] rev 28
- Coolers working with a hardcode reference
- Tue, 06 May 2014 13:24:25 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 06 May 2014 13:24:25 +0200] rev 27
- Sensor reading is done in a thread
- Mon, 05 May 2014 23:33:31 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 May 2014 23:33:31 +0200] rev 26
- Added coolers program, first draft
- Mon, 05 May 2014 20:25:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 May 2014 20:25:20 +0200] rev 25
- Better interface for rc-switch library code
- Mon, 05 May 2014 13:49:53 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 May 2014 13:49:53 +0200] rev 24
- Read configuraion searches two system paths and users home path. Also the configuration filename must be passed to the rdconfig function
- Mon, 05 May 2014 10:33:26 +0200
- by Michiel Broek <mbroek@mbse.eu> [Mon, 05 May 2014 10:33:26 +0200] rev 23
- Added more conditional compile switches
- Sun, 04 May 2014 22:29:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 04 May 2014 22:29:18 +0200] rev 22
- All four types RC switches are now implemented
- Sun, 04 May 2014 17:30:18 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 04 May 2014 17:30:18 +0200] rev 21
- Added 433 MHz transmitter and receiver library and demo programs
- Sun, 04 May 2014 17:18:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sun, 04 May 2014 17:18:27 +0200] rev 20
- Added 433 MHz transmitter and receiver library and demo programs
- Sat, 03 May 2014 23:21:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 03 May 2014 23:21:00 +0200] rev 19
- Turned LCD backlight off for now
- Fri, 02 May 2014 23:24:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 02 May 2014 23:24:44 +0200] rev 18
- wirinPi code is now conditional
- Fri, 02 May 2014 23:14:50 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 02 May 2014 23:14:50 +0200] rev 17
- Tests for wiringPi are now not fatal
- Fri, 02 May 2014 21:04:20 +0200
- by Michiel Broek <mbroek@mbse.eu> [Fri, 02 May 2014 21:04:20 +0200] rev 16
- Version 0.0.2. Added LCD display using wiringPi library. The display is connected via a LCM1602 IIC board.
- Tue, 29 Apr 2014 20:57:16 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Apr 2014 20:57:16 +0200] rev 15
- Shorter sleep
- Tue, 29 Apr 2014 17:27:42 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 29 Apr 2014 17:27:42 +0200] rev 14
- Added alias names
- Sat, 26 Apr 2014 22:53:10 +0200
- by Michiel Broek <mbroek@mbse.eu> [Sat, 26 Apr 2014 22:53:10 +0200] rev 13
- Version 0.0.1, changed data topics to /raw tree
- Thu, 24 Apr 2014 19:49:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Apr 2014 19:49:30 +0200] rev 12
- Deamon code added
- Thu, 24 Apr 2014 15:12:48 +0200
- by Michiel Broek <mbroek@mbse.eu> [Thu, 24 Apr 2014 15:12:48 +0200] rev 11
- Working reading thermometers and sending data to a MQTT server.
- Wed, 23 Apr 2014 21:29:37 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Apr 2014 21:29:37 +0200] rev 10
- Loop runs
- Wed, 23 Apr 2014 21:17:44 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Apr 2014 21:17:44 +0200] rev 9
- Config now reads sensors configuration
- Wed, 23 Apr 2014 17:19:00 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Apr 2014 17:19:00 +0200] rev 8
- Server communication seems ok, can handle server shutdowns too.
- Wed, 23 Apr 2014 14:25:09 +0200
- by Michiel Broek <mbroek@mbse.eu> [Wed, 23 Apr 2014 14:25:09 +0200] rev 7
- Added library
- Tue, 22 Apr 2014 23:28:17 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 23:28:17 +0200] rev 6
- Can connect and disconnect
- Tue, 22 Apr 2014 17:34:24 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 17:34:24 +0200] rev 5
- Cleanup config.h
- Tue, 22 Apr 2014 17:30:19 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 17:30:19 +0200] rev 4
- Added config.h.in
- Tue, 22 Apr 2014 17:26:30 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 17:26:30 +0200] rev 3
- Basic package is complete
- Tue, 22 Apr 2014 17:08:15 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 17:08:15 +0200] rev 2
- Added aclocal
- Tue, 22 Apr 2014 16:46:27 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 16:46:27 +0200] rev 1
- Added two sources
- Tue, 22 Apr 2014 16:34:02 +0200
- by Michiel Broek <mbroek@mbse.eu> [Tue, 22 Apr 2014 16:34:02 +0200] rev 0
- Initial set of files