Mercurial > bmsapp / file revision

/**
 * EditProduct.cpp is part of bmsapp.
 *
 * Tab 9, brewday.
 *
 * bmsapp is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * bmsapp is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */


/**
 * @brief Check the state by examining the date values.
 *        1. startdate and enddate invalid, planning/wait status.
 *           The enddate cannot be set.
 *        2. startdate valid and endate invalid, brewdate is planned.
 *           The fase will be brew. Enable setting of enddate.
 *        3. startdate valid, enddate and start and endtime can be set.
 *           The enddate cannot be before the startdate and not after 4
 *           days from the start.
 *        4. startdate and enddate and times are set and valid. Block
 *           the startdate setting. But only after setting a lot of
 *           brewdata and acknowledge set the fase to primary.
 *
 */
void EditProduct::updateBrewday()
{
    setStage();

    qDebug() << "updateBrewday" << product->brew_date_start << product->brew_date_end;

    ui->brew_startDate->setDate(product->brew_date_start.date());
    ui->brew_startTime->setTime(product->brew_date_start.time());
    ui->brew_endDate->setDate(product->brew_date_end.date());
    ui->brew_endTime->setTime(product->brew_date_end.time());
}


void EditProduct::brew_date_clear()
{
    product->brew_date_start.setDate(QDate());
    ui->brew_startDate->setDate(QDate());
}


void EditProduct::brew_date_today()
{
    product->brew_date_start.setDate(QDate::currentDate());
    ui->brew_startDate->setDate(QDate::currentDate());
}


void EditProduct::brew_start_date_changed(QDate val)
{
    product->brew_date_start.setDate(ui->brew_startDate->nullDate());
    updateBrewday();
    is_changed();
}


void EditProduct::brew_end_today()	// Not really, the brew start date is used.
{
    product->brew_date_end.setDate(product->brew_date_start.date());
    ui->brew_endDate->setDate(product->brew_date_end.date());
}


void EditProduct::brew_end_date_changed(QDate val)
{
    product->brew_date_end.setDate(ui->brew_endDate->nullDate());
    updateBrewday();
    is_changed();
}


void EditProduct::brew_start_time_changed(QTime val)
{
    product->brew_date_start.setTime(ui->brew_startTime->time());
    updateBrewday();
    is_changed();
}


void EditProduct::brew_end_time_changed(QTime val)
{
    product->brew_date_end.setTime(ui->brew_endTime->time());
    updateBrewday();
    is_changed();
}


void EditProduct::brew_date_ack()
{
    int rc = QMessageBox::warning(this, tr("Confirm brew"), tr("Confirm that the brew date and time are correct"),
			    QMessageBox::Yes | QMessageBox::No, QMessageBox::No);

    if (rc == QMessageBox::No)
        return;

    product->stage = PROD_STAGE_PRIMARY;
    setStage();
    is_changed();
}


void EditProduct::brew_mashph_changed(double val)
{
    if (product->brew_mash_ph == 0) {
	product->brew_mash_ph = 4.8;
	const QSignalBlocker blocker1(ui->brew_mashphEdit);
	ui->brew_mashphEdit->setValue(4.8);
    } else {
    	product->brew_mash_ph = val;
    }
    is_changed();
}


void EditProduct::brew_mashsg_changed(double val)
{
    product->brew_mash_sg = val;
    double c = Utils::sg_to_plato(product->est_mash_sg);
    double m = Utils::sg_to_plato(val);

    if (c > 0.5)
	product->brew_mash_efficiency = 100 * m / c;
    else
	product->brew_mash_efficiency = 0;
    ui->brew_masheffShow->setValue(product->brew_mash_efficiency);
    is_changed();
}


void EditProduct::brew_spargeph_changed(double val)
{
    if (product->brew_sparge_ph == 0) {
        product->brew_sparge_ph = 4.8;
        const QSignalBlocker blocker1(ui->brew_spargephEdit);
        ui->brew_spargephEdit->setValue(4.8);
    } else {
    	product->brew_sparge_ph = val;
    }
    is_changed();
}


void EditProduct::brew_volume_calc(double volume, double kettle_volume, double kettle_height, double est_volume, bool aboil)
{
    double k_cm;

    if (volume > 0)
        k_cm = Utils::kettle_cm(volume, kettle_volume, kettle_height);
    else
        k_cm = Utils::kettle_cm(est_volume, kettle_volume, kettle_height);

    QDialog* dialog = new QDialog(this);
    dialog->resize(320, 110);
    QDialogButtonBox *buttonBox = new QDialogButtonBox(dialog);
    buttonBox->setObjectName(QString::fromUtf8("buttonBox"));
    buttonBox->setGeometry(QRect(40, 65, 240, 32));
    buttonBox->setLayoutDirection(Qt::LeftToRight);
    buttonBox->setOrientation(Qt::Horizontal);
    buttonBox->setStandardButtons(QDialogButtonBox::Ok);
    buttonBox->setCenterButtons(true);

    QLabel *cmLabel = new QLabel(dialog);
    cmLabel->setObjectName(QString::fromUtf8("cmLabel"));
    cmLabel->setText(tr("Distance from top:"));
    cmLabel->setGeometry(QRect(10, 20, 141, 20));
    cmLabel->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);

    QDoubleSpinBox *cmEdit = new QDoubleSpinBox(dialog);
    cmEdit->setObjectName(QString::fromUtf8("cmEdit"));
    cmEdit->setGeometry(QRect(160, 20, 121, 24));
    cmEdit->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
    cmEdit->setAccelerated(true);
    cmEdit->setDecimals(1);
    cmEdit->setSuffix(tr(" cm"));
    cmEdit->setMaximum(kettle_height * 100);
    cmEdit->setSingleStep(0.1);
    cmEdit->setValue(k_cm);

    if (aboil)
	connect(cmEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::brew_aboil_cm_changed);
    else
	connect(cmEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::brew_preboil_cm_changed);
    connect(buttonBox, SIGNAL(rejected()), dialog, SLOT(reject()));
    connect(buttonBox, SIGNAL(accepted()), dialog, SLOT(accept()));

    dialog->setModal(true);
    dialog->exec();
    disconnect(cmEdit, nullptr, nullptr, nullptr);
}


void EditProduct::brew_preboilph_changed(double val)
{
    if (product->brew_preboil_ph == 0) {
        product->brew_preboil_ph = 4.8;
        const QSignalBlocker blocker1(ui->brew_preboilphEdit);
        ui->brew_preboilphEdit->setValue(4.8);
    } else {
        product->brew_preboil_ph = val;
    }
    is_changed();
}


void EditProduct::calcEfficiencyBeforeBoil()
{
    double m = 0;
    double tot;
    double result = 0;

    if (product->fermentables.size() == 0)
	return;	// no fermentables loaded yet
    for (int i = 0; i < product->fermentables.size(); i++) {
   	if (product->fermentables.at(i).added == FERMENTABLE_ADDED_MASH) {
	    m += product->fermentables.at(i).amount * (product->fermentables.at(i).yield / 100) * (1 - product->fermentables.at(i).moisture / 100);
	}
    }
    tot = Utils::sg_to_plato(product->brew_preboil_sg) * (product->brew_preboil_volume / 1.04) * product->brew_preboil_sg * 10 / 1000;

    if (m > 0)
	result = round((tot / m * 100) * 10.0) / 10.0;

    if (result < 0)
	result = 0;
    ui->brew_preboileffShow->setValue(result);
}


void EditProduct::brew_preboilsg_changed(double val)
{
    if (product->brew_preboil_sg == 0) {
	product->brew_preboil_sg = product->preboil_sg;
	const QSignalBlocker blocker1(ui->brew_preboilsgEdit);
        ui->brew_preboilsgEdit->setValue(product->preboil_sg);
    } else {
    	product->brew_preboil_sg = val;
    }
    is_changed();
    calcEfficiencyBeforeBoil();
}


void EditProduct::brew_preboilvol_changed(double val)
{
    if (product->brew_preboil_volume == 0) {
	product->brew_preboil_volume = product->boil_size * 1.04;
	const QSignalBlocker blocker1(ui->brew_preboilvolEdit);
        ui->brew_preboilvolEdit->setValue(product->boil_size * 1.04);
    } else {
    	product->brew_preboil_volume = val;
    }
    is_changed();
    calcEfficiencyBeforeBoil();
}


void EditProduct::brew_preboil_cm_changed(double val)
{
    double vol = Utils::kettle_vol(val, product->eq_kettle_volume, product->eq_kettle_height);
    product->brew_preboil_volume = vol;
    const QSignalBlocker blocker1(ui->brew_preboilvolEdit);
    ui->brew_preboilvolEdit->setValue(vol);
    is_changed();
    calcEfficiencyBeforeBoil();
}


void EditProduct::brew_preboil_button()
{
    brew_volume_calc(product->brew_preboil_volume, product->eq_kettle_volume, product->eq_kettle_height, product->boil_size * 1.04, false);
}


void EditProduct::brew_aboilph_changed(double val)
{
    if (product->brew_aboil_ph == 0) {
        product->brew_aboil_ph = 4.8;
        const QSignalBlocker blocker1(ui->brew_aboilphEdit);
        ui->brew_aboilphEdit->setValue(4.8);
    } else {
        product->brew_aboil_ph = val;
    }
    is_changed();
}


void EditProduct::calcEfficiencyAfterBoil()
{
    double m = 0;	// Sugars added at mash
    double b = 0;	// Sugars added at boil
    double result = 0;

    if (product->fermentables.size() == 0)
        return; // no fermentables loaded yet
    for (int i = 0; i < product->fermentables.size(); i++) {
	if (product->fermentables.at(i).added == FERMENTABLE_ADDED_MASH) {
	    m += product->fermentables.at(i).amount * (product->fermentables.at(i).yield / 100) * (1 - product->fermentables.at(i).moisture / 100);
	} else if (product->fermentables.at(i).added == FERMENTABLE_ADDED_BOIL) {
	    b += product->fermentables.at(i).amount * (product->fermentables.at(i).yield / 100) * (1 - product->fermentables.at(i).moisture / 100);
	}
    }
    double tot = Utils::sg_to_plato(product->brew_aboil_sg) * (product->brew_aboil_volume / 1.04) * product->brew_aboil_sg * 10 / 1000;
    tot -= b;	// total sugars in wort  minus added sugars.

    if (m > 0)
	result = round((tot / m * 100) * 10.0) / 10.0;
    product->brew_aboil_efficiency = result;
    ui->brew_aboileffShow->setValue(result);
    calcFermentables();	// This will also recalculate all volumes.
}


void EditProduct::brew_aboilsg_changed(double val)
{
    if (product->brew_aboil_sg == 0) {
        product->brew_aboil_sg = product->est_og3;
        const QSignalBlocker blocker1(ui->brew_aboilsgEdit);
        ui->brew_aboilsgEdit->setValue(product->est_og3);
    } else {
        product->brew_aboil_sg = val;
    }
    is_changed();
    calcEfficiencyAfterBoil();
}


void EditProduct::brew_aboilvol_changed(double val)
{
    if (product->brew_aboil_volume == 0) {
        product->brew_aboil_volume = product->batch_size * 1.04;
        const QSignalBlocker blocker1(ui->brew_aboilvolEdit);
        ui->brew_aboilvolEdit->setValue(product->batch_size * 1.04);
    } else {
        product->brew_aboil_volume = val;
    }
    is_changed();
    calcEfficiencyAfterBoil();
}


void EditProduct::brew_aboil_cm_changed(double val)
{
    double vol = Utils::kettle_vol(val, product->eq_kettle_volume, product->eq_kettle_height);
    product->brew_aboil_volume = vol;
    const QSignalBlocker blocker1(ui->brew_aboilvolEdit);
    ui->brew_aboilvolEdit->setValue(vol);
    is_changed();
    calcEfficiencyAfterBoil();
}


void EditProduct::brew_aboil_button()
{
    brew_volume_calc(product->brew_aboil_volume, product->eq_kettle_volume, product->eq_kettle_height, product->batch_size * 1.04, true);
}


void EditProduct::brew_cooling_method_changed(int val)
{
    product->brew_cooling_method = val;
    is_changed();
}


void EditProduct::brew_cooling_to_changed(double val)
{
    product->brew_cooling_to = val;
    is_changed();
}


void EditProduct::brew_cooling_time_changed(double val)
{
    product->brew_cooling_time = val;
    is_changed();
}


void EditProduct::brew_whirlpool9_changed(double val)
{
    product->brew_whirlpool9 = val;
    is_changed();
}


void EditProduct::brew_whirlpool7_changed(double val)
{
    product->brew_whirlpool7 = val;
    is_changed();
}


void EditProduct::brew_whirlpool6_changed(double val)
{
    product->brew_whirlpool6 = val;
    is_changed();
}


void EditProduct::brew_whirlpool2_changed(double val)
{
    product->brew_whirlpool2 = val;
    is_changed();
}


void EditProduct::brew_aerwith_changed(int val)
{
    product->brew_aeration_type = val;
    is_changed();
}


void EditProduct::brew_aerspeed_changed(double val)
{
    product->brew_aeration_speed = val;
    is_changed();
}


void EditProduct::brew_aertime_changed(double val)
{
    product->brew_aeration_time = val;
    is_changed();
}


void EditProduct::brew_trubloss_changed(double val)
{
    product->brew_fermenter_tcloss = val;
    is_changed();
    calcFermentables(); // This will also recalculate all volumes.
    calcIBUs();
}


void EditProduct::brew_topupwater_changed(double val)
{
    product->brew_fermenter_extrawater = val;
    is_changed();
    calcFermentables(); // This will also recalculate all volumes.
    calcIBUs();
}


void EditProduct::brew_log_button()
{
    QSqlQuery query;
    double timestamp;

    QDialog* dialog = new QDialog(this);
    dialog->resize(1024, 600);

    QPushButton *saveButton = new QPushButton(tr("Save"));
    saveButton->setAutoDefault(false);
    QIcon icon1;
    icon1.addFile(QString::fromUtf8(":icons/silk/disk.png"), QSize(), QIcon::Normal, QIcon::Off);
    saveButton->setIcon(icon1);

    QDialogButtonBox *buttonBox = new QDialogButtonBox(dialog);
    buttonBox->setObjectName(QString::fromUtf8("buttonBox"));
    buttonBox->setOrientation(Qt::Vertical);
    buttonBox->setStandardButtons(QDialogButtonBox::Ok);
    buttonBox->addButton(saveButton,QDialogButtonBox::ActionRole);

    QLineSeries *pv_mlt = new QLineSeries();
    pv_mlt->setName("MLT");
    QLineSeries *sp_mlt = new QLineSeries();
    sp_mlt->setName("Set");
    sp_mlt->setOpacity(0.75);
    QLineSeries *pv_hlt = new QLineSeries();
    pv_hlt->setName("HLT");
    QLineSeries *pwm_mlt1 = new QLineSeries();	// Top side of area
    QLineSeries *pwm_mlt0 = new QLineSeries();	// Bottom side of area

    query.prepare("SELECT * FROM log_brews WHERE code=:code ORDER BY datetime");
    query.bindValue(":code", product->code);
    query.exec();
    while (query.next()) {
	timestamp = query.value("datetime").toDateTime().toSecsSinceEpoch() * 1000;
	pv_mlt->append(timestamp, query.value("pv_mlt").toDouble());
	sp_mlt->append(timestamp, query.value("sp_mlt").toDouble());
	if (query.value("pv_hlt").toDouble() > 0)
	    pv_hlt->append(timestamp, query.value("pv_hlt").toDouble());
	pwm_mlt0->append(timestamp, 0);
	pwm_mlt1->append(timestamp, query.value("pwm_mlt").toInt());
    }

    QPen pen(QColorConstants::Svg::navy);
    pen.setWidth(3);
    pv_mlt->setPen(pen);
    QAreaSeries *pwm_mlt = new QAreaSeries(pwm_mlt0, pwm_mlt1);
    pwm_mlt->setName("MLT pwr");
    pwm_mlt->setOpacity(0.25);

    chart = new QChart();
    chart->setTitle(QString("%1 \"%2\"").arg(product->code).arg(product->name));
    chart->addSeries(pwm_mlt);	// Order is important, first drawn is lowest layer.
    chart->addSeries(sp_mlt);
    chart->addSeries(pv_hlt);
    chart->addSeries(pv_mlt);	// Top layer.

    QDateTimeAxis *axisX = new QDateTimeAxis;
    axisX->setTickCount(20);
    axisX->setFormat("HH:mm");
    axisX->setTitleText(tr("Time"));
    axisX->setLabelsFont(QFont("Helvetica", 8, QFont::Normal));
    chart->addAxis(axisX, Qt::AlignBottom);
    pv_mlt->attachAxis(axisX);
    pv_hlt->attachAxis(axisX);

    QValueAxis *axisY = new QValueAxis;
    axisY->setRange(0, 110);
    axisY->setTickCount(12);
    axisY->setMinorTickCount(1);
    axisY->setLabelFormat("%i");
    axisY->setTitleText(tr("Temperature °C or Power %"));
    axisY->setLabelsFont(QFont("Helvetica", 8, QFont::Normal));
    chart->addAxis(axisY, Qt::AlignLeft);

    pwm_mlt->attachAxis(axisY);
    pv_mlt->attachAxis(axisY);
    sp_mlt->attachAxis(axisY);
    pv_hlt->attachAxis(axisY);

    connect(pv_mlt, &QLineSeries::hovered, this, &EditProduct::tooltip);
    connect(pv_hlt, &QLineSeries::hovered, this, &EditProduct::tooltip);

    chartView = new QChartView(chart);
    chartView->setRenderHint(QPainter::Antialiasing);
    dialog->setLayout(new QHBoxLayout);
    dialog->layout()->addWidget(chartView);
    dialog->layout()->addWidget(buttonBox);

    connect(buttonBox, SIGNAL(accepted()), dialog, SLOT(accept()));
    connect(saveButton, SIGNAL(clicked()), this, SLOT(savePNG()));

    dialog->setModal(true);
    dialog->exec();
}


void EditProduct::savePNG()
{
    QString path = QFileDialog::getSaveFileName(this, tr("Save Image"), QDir::homePath() + "/brewday.png", tr("Image (*.png)"));
    if (path.isEmpty()) {
	QMessageBox::warning(this, tr("Save File"), tr("No image file selected."));
	return;
    }

    QImage img((chartView->size()), QImage::Format_ARGB32);
    QPainter painter;
    painter.begin(&img);
    chartView->render(&painter);
    painter.setRenderHint(QPainter::Antialiasing);
    painter.end();
    img.save(path);
}


void EditProduct::tooltip(QPointF point, bool state)
{
    QAbstractSeries *series = qobject_cast<QAbstractSeries *>(sender());

    if (t_tooltip == 0)
	t_tooltip = new Callout(chart, series);

    if (state) {
	QDateTime timeis = QDateTime::fromMSecsSinceEpoch(point.x());
	t_tooltip->setSeries(series);
	t_tooltip->setText(QString("%1\n%2 %3°C").arg(timeis.toString("dd-MM-yyyy hh:mm")).arg(series->name()).arg(point.y(), 2, 'f', 1));
	t_tooltip->setAnchor(point);
	t_tooltip->setZValue(11);
	t_tooltip->updateGeometry();
	t_tooltip->show();
    } else {
	t_tooltip->hide();
    }
}