Sat, 27 Apr 2019 15:36:16 +0200 |
Chiel Broek |
Version 0.9.5, interior lights are now only controlled by the open door or a 5 minutes timer. The timer is started via an MQTT command. The BMS web application sends this command just before a webcam page is requested.
|
file |
diff |
annotate
|
Wed, 27 Feb 2019 17:38:06 +0100 |
Michiel Broek |
Concept for yeast limits settings.
|
file |
diff |
annotate
|
Thu, 07 Feb 2019 14:59:47 +0100 |
Michiel Broek |
Version 0.9.3. Splitted the temperature low and high settings in fridge and beer mode.
|
file |
diff |
annotate
|
Sun, 20 Jan 2019 13:34:09 +0100 |
Michiel Broek |
Version 0.9.2 DLOG messages every minute unless a unit is off. More event messages added. The target temperatur is now taken from the PIDs.
|
file |
diff |
annotate
|
Mon, 14 Jan 2019 22:46:27 +0100 |
Michiel Broek |
Removed useless version marks from the xml configuration. Added DCMD profile configuration to install and delete profiles in a fermenter. Removed the old profiles configuration. Removed useless xml configuration error check because none has been triggered in five years, Removed several obsolete upgrade functions. Updated the web liveview.
|
file |
diff |
annotate
|
Thu, 10 Jan 2019 16:33:42 +0100 |
Michiel Broek |
Version 0.9.0. Implemented DCMD via mqtt to set stage, mode, setpoint low and high. Implemeted DCMD via mqtt to set heater, cooler, fan and light state. Implemented DCMD via mqtt to set product code and name. Set the PID's in fridge mode without idle range offset, that was an old leftover setting that was obsolete.
|
file |
diff |
annotate
|
Sat, 04 Aug 2018 16:29:12 +0200 |
Michiel Broek |
Versie 0.8.8 Fermentation stage implemented in units.
|
file |
diff |
annotate
|
Thu, 02 Aug 2018 12:20:06 +0200 |
Michiel Broek |
Versie 0.8.6 De mosquitto library is geen optie meer maar verplicht.
|
file |
diff |
annotate
|
Tue, 31 Jul 2018 16:42:11 +0200 |
Michiel Broek |
Versie 0.8.5. Implementatie product code en product naam. Implementatie DLOG MQTT berichten. Verminderde server rotocol debug berichten.
|
file |
diff |
annotate
|
Wed, 25 Jul 2018 20:08:13 +0200 |
Michiel Broek |
Updated simulator with more simulated devices.
|
file |
diff |
annotate
|
Mon, 23 Jul 2018 14:41:21 +0200 |
Michiel Broek |
Versie 0.8.3. Enkele debug console berichten verwijderd. De MQTT NCMD reboot en rebirth commando's geimplementeerd.
|
file |
diff |
annotate
|
Sat, 21 Jul 2018 20:40:02 +0200 |
Michiel Broek |
Versie 0.8.2. Node NBIRTH payload heeft nu netwerk informatie.
|
file |
diff |
annotate
|
Wed, 18 Jul 2018 13:26:37 +0200 |
Michiel Broek |
Versie 0.6.8. Code cleanup. Publish NDATA MQTT bericht iedere 5 minuten of als er een THB wijziging is.
|
file |
diff |
annotate
|
Mon, 16 Jul 2018 17:23:22 +0200 |
Michiel Broek |
Versie 0.6.7. Globale uuid toegevoegd voor de NBIRTH payload.
|
file |
diff |
annotate
|
Sat, 14 Jul 2018 21:15:20 +0200 |
Michiel Broek |
Versie 0.6.4. Aan de global setup de MQTT instellingen toegevoegd. Die zijn er ook als MQTT niet op het systeem aanwezig is. Indien het de global setup wijzigd, wordt de MQTT verbinding opnieuw gemaakt.
|
file |
diff |
annotate
|
Sat, 14 Jul 2018 17:21:25 +0200 |
Michiel Broek |
Versie 0.6.3. MQTT device berichten alleen als een fermenter ingeschakeld is. MQTT fermenter birth en death berichhten als een fementer in of uitgeschakeld wordt. MQTT node death bericht bij normaal afsluiten van de daemon. Alle MQTT persistent berichten worden nu goed opgeruikmd.
|
file |
diff |
annotate
|
Thu, 10 Aug 2017 16:27:54 +0200 |
Michiel Broek |
Serious alarms are above 255
|
file |
diff |
annotate
|
Tue, 25 Jul 2017 11:43:35 +0200 |
Michiel Broek |
Added unit alarm flag
|
file |
diff |
annotate
|
Mon, 26 Jun 2017 19:21:07 +0200 |
Michiel Broek |
Added chiller configuration items
|
file |
diff |
annotate
|
Wed, 07 Jun 2017 23:06:47 +0200 |
Michiel Broek |
Version 0.6.1 added support for domoticz mqtt sensors.
|
file |
diff |
annotate
|
Fri, 19 May 2017 16:34:21 +0200 |
Michiel Broek |
Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
|
file |
diff |
annotate
|
Mon, 08 May 2017 16:26:02 +0200 |
Michiel Broek |
New MQTT protocol
|
file |
diff |
annotate
|
Mon, 09 May 2016 21:35:55 +0200 |
Michiel Broek |
Units now have an unique alias name so that the MQTT messages are more friendly.
|
file |
diff |
annotate
|
Mon, 02 May 2016 16:15:37 +0200 |
Michiel Broek |
Created mqtt sourcefiles. Use flags to trigger publish messages. The main source does not know and does not care if MQTT messages will be sent. Version 0.5.5
|
file |
diff |
annotate
|
Sat, 30 Apr 2016 21:06:20 +0200 |
Michiel Broek |
Compiles mosquitto code if library is found on the system. Bumped to version 0.5.4
|
file |
diff |
annotate
|
Sat, 14 Nov 2015 16:52:33 +0100 |
Michiel Broek |
The first ideas of the brewpanel simulation are in place.
|
file |
diff |
annotate
|
Sun, 08 Nov 2015 22:13:02 +0100 |
Michiel Broek |
Reenabled code round LCD driver.
|
file |
diff |
annotate
|
Wed, 16 Sep 2015 22:05:05 +0200 |
Michiel Broek |
Fermentation profiles now have a low and high temperature setting so that you can use a temperture window. Each profile step can now set for beer or air temperature reference. The logfiles have an extra temperature field for this. Bumped to version 0.4.2.
|
file |
diff |
annotate
|
Sat, 16 May 2015 17:39:30 +0200 |
Michiel Broek |
Made the client-server protocol more robust. When a change to a unit is made using the web interface, the main process is stopped during the update. Splitted the PID in two PID's, one for heating and one for cooling. Adjusted the web edit scrreen for this, but there are still rough edges. Replaced the PID code, maybe this one works better for our purpose. The simulator air temperature changes on the simulator heater and cooler, but it is not realistic at all. This is a development version, do not use in production. The version is 0.3.0
|
file |
diff |
annotate
|
Fri, 20 Mar 2015 20:23:12 +0100 |
Michiel Broek |
Added defines copied from kernel source with 1-Wire device family numbers.
|
file |
diff |
annotate
|
Mon, 16 Feb 2015 20:41:09 +0100 |
Michiel Broek |
Code cleanup
|
file |
diff |
annotate
|
Sun, 15 Feb 2015 20:38:54 +0100 |
Michiel Broek |
Added Kp, Kd and Ki settings to the units. Bumped to version 0.2.9
|
file |
diff |
annotate
|
Sat, 07 Feb 2015 23:12:55 +0100 |
Michiel Broek |
Updated to add support for lights in a fermenter unit and a Power Supply status.
|
file |
diff |
annotate
|
Wed, 29 Oct 2014 20:27:37 +0100 |
Michiel Broek |
Added usage counters
|
file |
diff |
annotate
|
Wed, 29 Oct 2014 14:41:00 +0100 |
Michiel Broek |
Corrected margin labels
|
file |
diff |
annotate
|
Sat, 25 Oct 2014 21:08:47 +0200 |
Michiel Broek |
Added code to detect primary fermentation
|
file |
diff |
annotate
|
Wed, 03 Sep 2014 15:02:09 +0200 |
Michiel Broek |
Profile progress is visible in the web interface
|
file |
diff |
annotate
|
Sat, 30 Aug 2014 13:06:07 +0200 |
Michiel Broek |
The PID commands have an adjustable delay, default 5 minutes
|
file |
diff |
annotate
|
Sat, 23 Aug 2014 23:38:18 +0200 |
Michiel Broek |
Simulation of fridge cold loss to the room added for testing.
|
file |
diff |
annotate
|
Fri, 22 Aug 2014 17:12:42 +0200 |
Michiel Broek |
Added framework for a simulation of a fridge with heater to use as controlled fermentor
|
file |
diff |
annotate
|
Mon, 18 Aug 2014 19:55:52 +0200 |
Michiel Broek |
Removed two system menus that would not work correctly. All panel menus are complete now.
|
file |
diff |
annotate
|
Sat, 16 Aug 2014 17:11:09 +0200 |
Michiel Broek |
Selecting units in setup does now work. Menu select variables are protected with thread locking.
|
file |
diff |
annotate
|
Fri, 15 Aug 2014 14:38:32 +0200 |
Michiel Broek |
Added thread locks to all LCD access functions. This seems to have fixed the LCD corruption problems.
|
file |
diff |
annotate
|
Thu, 14 Aug 2014 22:43:41 +0200 |
Michiel Broek |
Added thread locks for device processing
|
file |
diff |
annotate
|
Mon, 11 Aug 2014 12:34:49 +0200 |
Michiel Broek |
Added profile state ABORT
|
file |
diff |
annotate
|
Mon, 11 Aug 2014 11:09:23 +0200 |
Michiel Broek |
Do not use 100% cpu on a system without devices
|
file |
diff |
annotate
|
Sun, 10 Aug 2014 23:36:22 +0200 |
Michiel Broek |
Added a bunch of panel menus
|
file |
diff |
annotate
|
Sun, 10 Aug 2014 17:25:50 +0200 |
Michiel Broek |
Added offset value for sensor that need it
|
file |
diff |
annotate
|
Sun, 10 Aug 2014 14:45:11 +0200 |
Michiel Broek |
Added GLOBAL GET and GLOBAL PUT commands.
|
file |
diff |
annotate
|
Sun, 10 Aug 2014 13:26:35 +0200 |
Michiel Broek |
Start initial menu setup
|
file |
diff |
annotate
|
Thu, 07 Aug 2014 22:06:18 +0200 |
Michiel Broek |
Added some ideas about profiles.
|
file |
diff |
annotate
|
Thu, 07 Aug 2014 19:38:30 +0200 |
Michiel Broek |
Client/Server communication is now almost final
|
file |
diff |
annotate
|
Tue, 05 Aug 2014 21:33:06 +0200 |
Michiel Broek |
PID finetuning
|
file |
diff |
annotate
|
Mon, 04 Aug 2014 15:18:29 +0200 |
Michiel Broek |
Initial code for a simple PID controller.
|
file |
diff |
annotate
|
Sun, 03 Aug 2014 22:49:33 +0200 |
Michiel Broek |
Units editing is more or less complete. Changed structures for heating, cooling, fan and door. Updated the web interface to confuigure all these things.
|
file |
diff |
annotate
|
Thu, 31 Jul 2014 23:57:04 +0200 |
Michiel Broek |
Removed old 1-wire bus
|
file |
diff |
annotate
|
Thu, 31 Jul 2014 21:04:06 +0200 |
Michiel Broek |
Added Raspberry GPIO devices
|
file |
diff |
annotate
|
Thu, 31 Jul 2014 17:44:50 +0200 |
Michiel Broek |
Added device configuration
|
file |
diff |
annotate
|
Thu, 31 Jul 2014 13:43:09 +0200 |
Michiel Broek |
Added GET AIR, GET BEER, GET TARGET commands
|
file |
diff |
annotate
|
Sat, 26 Jul 2014 13:18:00 +0200 |
Michiel Broek |
Profiles now have a busy state
|
file |
diff |
annotate
|