Sat, 11 May 2019 23:13:40 +0200
Added flags for each ingredient group for the supplies state. On the main screen show the state of the supplies if the product stage is not yet packaged. Calculate the state of the supplies for fermentables, hops, yeasts and miscs. In the grids don't show the inventory values after they are used and reduced. On the fermentables tab show the weight of the grains to mash.
0 | 1 | Centrale daemon 'bmsd' regelt de dagelijkse berichten tussen MQTT en de |
2 | database. Om deze berichten betrouwbaar af te handelen is MQTT er tussen | |
3 | gezet. | |
4 | Alle sensoren en controllers communiceren uitsluitend via MQTT. | |
5 | ||
6 | Sensoren en controllers: | |
7 | ||
8 | 1. Vergisting controllers. | |
9 | 2. Temperatuur loggen. | |
10 | 3. Hergisting drukmeters. (druk + temp). | |
11 | 4. Brouw controllers. | |
12 | 5. Ispindel. | |
13 | ||
14 | ||
15 | Stappen: | |
16 | ||
17 | 1. Importeren oude vergisting en brouw logs. DONE. | |
18 | 2. Thermferm moet DLOG berichten gaan sturen, per wijziging en per 5 minuten. DONE. | |
19 | 3. bmsd moet deze DLOG berichten verwerken. Versie 0.0.2. Bier producten in database. DONE. | |
20 | 4. Versie 0.0.2 handmatig installeren op productie. DONE. | |
21 | 5. Thermferm uitbreiden met vergisting stage. DONE. | |
104 | 22 | 6. Brouw controller uitbreiden met MQTT. Niet, ESP32 wordt onstabiel. |
23 | 7. bmsd uitbreiden met brouw controller berichten. Niet, zie hierboven. | |
24 | 8. bmsd productie platform upgraden, versie 0.0.3 DONE. | |
268 | 25 | 9. bmsd recepten editor implementeren. DONE. |
26 | 10. bmsd uitbreiden met productie (brews) stappen, met hierin recepten. DONE. | |
325
9a8c650972ca
Update some documentation. Thermometer gauges animate easing
Michiel Broek <mbroek@mbse.eu>
parents:
314
diff
changeset
|
27 | 11. bmsd koppelen logs aan productie. DONE. |
21
acb2d8098f19
Added inventory miscs and water sources.
Michiel Broek <mbroek@mbse.eu>
parents:
20
diff
changeset
|
28 | |
18
395833e20f88
Better error messages in syslog
Michiel Broek <mbroek@mbse.eu>
parents:
0
diff
changeset
|
29 | |
0 | 30 | |
31 | ||
32 | MQTT structuur volgens Sparkplug model. | |
33 | ||
34 | mbv1.0/fermenters/[NBIRTH,DBIRTH]/<hostname>/ | |
35 | mbv1.0/fermenters/DDATA/<hostname>/<unitalias>/ | |
36 | ||
37 | --------------------------------------------------------------------------- | |
38 | ||
39 | namespace/group_id/message_type/edge_node_id/{device_id} | |
40 | ||
41 | namespace is de root, "mbv1.0" | |
42 | ||
43 | group_id oa: fermenters, brewcontrol, env_sensor | |
44 | ||
45 | message_type: NBIRTH - Birth certificate for MQTT EoN nodes. | |
46 | NDEATH - Death certificate for MQTT EoN nodes. | |
47 | NCMD - Node command message. | |
48 | DBIRTH - Birth certificate for devices. | |
49 | DDEATH - Death certificate for devices. | |
50 | NDATA - Node data message. | |
51 | DDATA - Device data message. | |
52 | DLOG - Device data logging. | |
53 | DCMD - Device command message. | |
54 | STATE - Critical application state message. | |
55 | ||
56 | NCMD: reboot (application restart) | |
57 | rebirth | |
58 | ||
59 | DCMD: fermenter state change + temperature settings. | |
60 | fermenter profile install. | |
61 | fermenter load product. | |
62 | fermenter set stage | |
63 | ||
64 | ||
109
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
65 | Product: code, uuid en naam. |
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
66 | Stage: Plan Wait Brew Primary Secondary Tertiary Package Carbonation Mature Taste Ready Closed |
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
67 | | | | | | | |
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
68 | | | | | | +------------- Log/rapport |
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
69 | | | | | +------------------------ rapport/etiketten |
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
70 | | +-------+---------+--------------------------------- Log/rapport |
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
71 | +--------------------------------------------------------- Log/rapport |
0 | 72 | |
174 | 73 | Main table: products. |
355 | 74 | In progress: overview. DONE. |
75 | In Progress: view charts. DONE. | |
174 | 76 | In Progress: view logs. |
355 | 77 | In Progress: update state. DONE. |
174 | 78 | In Progress: Tabbed screens. DONE. |
79 | Start new: some sort of wizzard like a new recipe. DONE. | |
355 | 80 | Archive: select via name/code/date. DONE. |
109
3c334f3ca7f9
Noted some ideas and added some in the menu.
Michiel Broek <mbroek@mbse.eu>
parents:
108
diff
changeset
|
81 | Calendar: shows upcoming events. |
355 | 82 | Recipes can be copied to 'recipes' or 'brews', imported from 'recipes'/'products' or created manual. DONE. |
83 | Products recipes Beerxml import. DONE. | |
180
a5aa3502310c
Updated README. Getfermenter and getnode scripts return 0 and 1 instead of false and true for boolean values. Global variable my_uuid added. Moved the javascript out of mon_fermenter.php. Added log chart view button in the fermenter monitor.
Michiel Broek <mbroek@mbse.eu>
parents:
174
diff
changeset
|
84 | Recipes Beerxml import. |
106
c64d979613ab
Prepare for production brews databases
Michiel Broek <mbroek@mbse.eu>
parents:
104
diff
changeset
|
85 | |
194
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
86 | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
87 | ----------------------------------------------------------------------------- |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
88 | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
89 | Formaat csv vergisting logs. |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
90 | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
91 | Directory: www/logs/fermentation |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
92 | Filenaam: product_code\ product_name.log |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
93 | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
94 | 2014-11-15 18:39,BEER,PRIMARY,20.312,19.750,-1.500,20.5,18.6,18.8,35,12345,0,67890,Whatsup,Fermenter |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
95 | | | | | | | | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
96 | 0 datetime + | | | | | | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
97 | 1 mode --------------+ | | | | | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
98 | 2 stage -------------------+ | | | | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
99 | 3 temp air -----------------------+ | | | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
100 | 4 temp beer -----------------------------+ | | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
101 | 5 temp chiller ---------------------------------+ | | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
102 | 6 temp room -------------------------------------------+ | | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
103 | 7 setpoint low ---------------------------------------------+ | | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
104 | 8 setpoint high -------------------------------------------------+ | | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
105 | 9 heater power ------------------------------------------------------+ | | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
106 | 10 heater usage ----------------------------------------------------------+ | | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
107 | 11 cooler power --------------------------------------------------------------+ | | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
108 | 12 cooler usage ------------------------------------------------------------------+ | | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
109 | 13 event --------------------------------------------------------------------------------+ | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
110 | 14 fermenter uuid --------------------------------------------------------------------------------+ |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
111 | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
112 | De oude logs zijn geimporteerd en geconverteerd. Nieuwe worden geschreven |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
113 | door bmsd welke de log gegevens ontvangt via MQTT DLOG berichten. |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
114 | Vanwege de snelheid van verwerken staan de logs niet in de database. |
239 | 115 | Kunnen we de loggegevens versturen in gzip formaat om bandbreedte te sparen? |
194
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
116 | |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
117 | ----------------------------------------------------------------------------- |
d202777ebae5
Added design notes for the csv log format from fermenters. In bmsd configuration added the web_root entry. Switched fermenter DLOG messages to store the log in flat csv files instead of the database. This is much faster and the graphs look better.
Michiel Broek <mbroek@mbse.eu>
parents:
180
diff
changeset
|
118 | |
290 | 119 | TODO: |
120 | ||
121 | Export ingredienten naar xml. | |
122 | ||
313
9f45d09c2071
Added alcohol tolerance field in the yeasts database.
Michiel Broek <mbroek@mbse.eu>
parents:
312
diff
changeset
|
123 | Extra: |
9f45d09c2071
Added alcohol tolerance field in the yeasts database.
Michiel Broek <mbroek@mbse.eu>
parents:
312
diff
changeset
|
124 | |
314
f943efa07d9f
Added yeast duplicate button
Michiel Broek <mbroek@mbse.eu>
parents:
313
diff
changeset
|
125 | Gisten diastaticus bit toevoegen. |
325
9a8c650972ca
Update some documentation. Thermometer gauges animate easing
Michiel Broek <mbroek@mbse.eu>
parents:
314
diff
changeset
|
126 | Waarschuwing voor overschrijden moutstort. |
313
9f45d09c2071
Added alcohol tolerance field in the yeasts database.
Michiel Broek <mbroek@mbse.eu>
parents:
312
diff
changeset
|
127 | Gist typen: kveik en brett? Apart of niet. |
9f45d09c2071
Added alcohol tolerance field in the yeasts database.
Michiel Broek <mbroek@mbse.eu>
parents:
312
diff
changeset
|
128 | |
355 | 129 | Controle ingredienten voor het brouwen. |
313
9f45d09c2071
Added alcohol tolerance field in the yeasts database.
Michiel Broek <mbroek@mbse.eu>
parents:
312
diff
changeset
|
130 |