Mercurial > bmsapp / changeset

--- a/src/EditProduct.cpp	Wed May 18 08:59:54 2022 +0200
+++ b/src/EditProduct.cpp	Wed May 18 17:03:05 2022 +0200
@@ -1117,6 +1117,27 @@
     connect(ui->brew_topupwaterEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::brew_topupwater_changed);
     connect(ui->brew_logButton, SIGNAL(clicked()), this, SLOT(brew_log_button()));
 
+    /* All signals from tab Fermentation */
+    connect(ui->prim_startCEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::primary_start_changed);
+    connect(ui->prim_maxCEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::primary_peak_changed);
+    connect(ui->prim_endCEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::primary_end_changed);
+    connect(ui->prim_endsgEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::primary_sg_changed);
+    connect(ui->prim_endsgButton, SIGNAL(clicked()), this, SLOT(primary_sg_button()));
+    connect(ui->prim_enddateEdit, &QDateEdit::dateChanged, this, &EditProduct::primary_date_changed);
+    connect(ui->prim_enddateButton, SIGNAL(clicked()), this, SLOT(primary_date_button()));
+    connect(ui->prim_ackButton, SIGNAL(clicked()), this, SLOT(primary_date_ack()));
+    connect(ui->sec_tempEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::secondary_temp_changed);
+    connect(ui->sec_sgEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::secondary_sg_changed);
+    connect(ui->sec_sgButton, SIGNAL(clicked()), this, SLOT(secondary_sg_button()));
+    connect(ui->sec_enddateEdit, &QDateEdit::dateChanged, this, &EditProduct::secondary_date_changed);
+    connect(ui->sec_enddateButton, SIGNAL(clicked()), this, SLOT(secondary_date_button()));
+    connect(ui->sec_ackButton, SIGNAL(clicked()), this, SLOT(secondary_date_ack()));
+    connect(ui->tert_tempEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::tertiary_temp_changed);
+    connect(ui->tert_sgEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::tertiary_sg_changed);
+    connect(ui->tert_sgButton, SIGNAL(clicked()), this, SLOT(tertiary_sg_button()));
+    connect(ui->ferm_log1Button, SIGNAL(clicked()), this, SLOT(ferm_log1_button()));
+    connect(ui->ferm_log2Button, SIGNAL(clicked()), this, SLOT(ferm_log2_button()));
+
     setStage();
 
     ui->saveButton->setEnabled(false);

--- a/src/EditProduct.h	Wed May 18 08:59:54 2022 +0200
+++ b/src/EditProduct.h	Wed May 18 17:03:05 2022 +0200
@@ -174,6 +174,26 @@
     void brew_trubloss_changed(double val);
     void brew_topupwater_changed(double val);
     void brew_log_button();
+    void brix_changed(double val);
+    void primary_start_changed(double val);
+    void primary_peak_changed(double val);
+    void primary_end_changed(double val);
+    void primary_sg_changed(double val);
+    void primary_sg_button();
+    void primary_date_changed(QDate val);
+    void primary_date_button();
+    void primary_date_ack();
+    void secondary_temp_changed(double val);
+    void secondary_sg_changed(double val);
+    void secondary_sg_button();
+    void secondary_date_changed(QDate val);
+    void secondary_date_button();
+    void secondary_date_ack();
+    void tertiary_temp_changed(double val);
+    void tertiary_sg_changed(double val);
+    void tertiary_sg_button();
+    void ferm_log1_button();
+    void ferm_log2_button();
 
     /* Modified progress bars */
     void ferment_perc_mash_valueChanged(int value);
@@ -195,6 +215,7 @@
     QString bar_100 = "QProgressBar::chunk {background: #80FF80;}";
     int recno;
     bool textIsChanged = false;
+    double ret_fg;
     /*
      * Variables for popup ingredients editing.
      */
@@ -249,6 +270,7 @@
     void calcEfficiencyBeforeBoil();
     void calcEfficiencyAfterBoil();
     void brew_volume_calc(double volume, double kettle_volume, double kettle_height, double est_volume, bool aboil);
+    double get_fg(double gravity);
 };
 
 #endif

--- a/src/EditProductTab1.cpp	Wed May 18 08:59:54 2022 +0200
+++ b/src/EditProductTab1.cpp	Wed May 18 17:03:05 2022 +0200
@@ -202,6 +202,8 @@
 	stage = PROD_STAGE_BREW;
     if ((stage == PROD_STAGE_BREW) && (! product->brew_date_start.date().isValid()))
 	stage = PROD_STAGE_WAIT;
+    /* from PROD_STAGE_BREW to PROD_STAGE_PRIMARY is handled in EditProductTab9.cpp */
+    /* from PROD_STAGE_PRIMARY to PROD_STAGE_SECONDARY is handled in EditProductTab10.cpp */
 
     if (product->stage != stage) {
 	qDebug() << "setStage() change state:" << prod_stages[product->stage] << "to:" << prod_stages[stage];
@@ -312,6 +314,7 @@
 	ui->brew_startButton1->show();
         ui->brew_startButton2->show();
         ui->brew_startDate->setReadOnly(false);
+	ui->brew_startDate->setMinimumDate(product->birth.addDays(-1));	// The birth date is the first valid date.
 	ui->brew_endButton1->hide();
 	ui->brew_startLabel2->hide();
 	ui->brew_endLabel->hide();
@@ -422,7 +425,63 @@
 
     /* Tab 10, fermentation */
     ui->tabWidget->setTabEnabled(9, stage > PROD_STAGE_WAIT);
-
+    ui->prim_enddateEdit->setReadOnly(true);
+    ui->prim_enddateEdit->setButtonSymbols(QAbstractSpinBox::NoButtons);
+    ui->prim_enddateButton->hide();
+    ui->prim_ackButton->hide();
+    ui->sec_enddateEdit->setReadOnly(true);
+    ui->sec_enddateEdit->setButtonSymbols(QAbstractSpinBox::NoButtons);
+    ui->sec_enddateButton->hide();
+    ui->sec_ackButton->hide();
+    ui->prim_startCEdit->setReadOnly(product->stage != PROD_STAGE_PRIMARY);
+    ui->prim_startCEdit->setButtonSymbols((product->stage == PROD_STAGE_PRIMARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    ui->prim_maxCEdit->setReadOnly(product->stage != PROD_STAGE_PRIMARY);
+    ui->prim_maxCEdit->setButtonSymbols((product->stage == PROD_STAGE_PRIMARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    ui->prim_endCEdit->setReadOnly(product->stage != PROD_STAGE_PRIMARY);
+    ui->prim_endCEdit->setButtonSymbols((product->stage == PROD_STAGE_PRIMARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    ui->prim_endsgEdit->setReadOnly(product->stage != PROD_STAGE_PRIMARY);
+    ui->prim_endsgEdit->setButtonSymbols((product->stage == PROD_STAGE_PRIMARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    if (product->stage == PROD_STAGE_PRIMARY)
+	ui->prim_endsgButton->show();
+    else
+	ui->prim_endsgButton->hide();
+    if ((product->primary_start_temp > 0) && (product->primary_max_temp > 0) && (product->primary_end_temp > 0) &&
+	(product->primary_end_sg > 0.980) && (product->stage == PROD_STAGE_PRIMARY)) {
+	ui->prim_enddateEdit->setReadOnly(false);
+	ui->prim_enddateEdit->setButtonSymbols(QAbstractSpinBox::UpDownArrows);
+	ui->prim_enddateEdit->setMinimumDate(product->brew_date_end.date());
+        ui->prim_enddateEdit->setMaximumDate(QDate::currentDate());
+	ui->prim_enddateButton->show();
+	if (product->primary_end_date.isValid()) {
+	    ui->prim_ackButton->show();
+	}
+    }
+    ui->sec_tempEdit->setReadOnly(product->stage != PROD_STAGE_SECONDARY);
+    ui->sec_tempEdit->setButtonSymbols((product->stage == PROD_STAGE_SECONDARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    ui->sec_sgEdit->setReadOnly(product->stage != PROD_STAGE_SECONDARY);
+    ui->sec_sgEdit->setButtonSymbols((product->stage == PROD_STAGE_SECONDARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    if (product->stage == PROD_STAGE_SECONDARY)
+        ui->sec_sgButton->show();
+    else
+        ui->sec_sgButton->hide();
+    if ((product->secondary_end_sg > 0.980) && (product->secondary_temp > 0) && (product->stage == PROD_STAGE_SECONDARY)) {
+	ui->sec_enddateEdit->setReadOnly(false);
+    	ui->sec_enddateEdit->setButtonSymbols(QAbstractSpinBox::UpDownArrows);
+	ui->sec_enddateEdit->setMinimumDate(product->primary_end_date.addDays(-1));	// Allow same date as primary end.
+	ui->sec_enddateEdit->setMaximumDate(QDate::currentDate());
+    	ui->sec_enddateButton->show();
+	if (product->secondary_end_date.isValid()) {
+	    ui->sec_ackButton->show();
+	}
+    }
+    ui->tert_tempEdit->setReadOnly(product->stage != PROD_STAGE_TERTIARY);
+    ui->tert_tempEdit->setButtonSymbols((product->stage == PROD_STAGE_TERTIARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    ui->tert_sgEdit->setReadOnly(product->stage != PROD_STAGE_TERTIARY);
+    ui->tert_sgEdit->setButtonSymbols((product->stage == PROD_STAGE_TERTIARY) ? QAbstractSpinBox::UpDownArrows : QAbstractSpinBox::NoButtons);
+    if (product->stage == PROD_STAGE_TERTIARY)
+        ui->tert_sgButton->show();
+    else
+        ui->tert_sgButton->hide();
 
     /* Tab 11, packaging */
     ui->tabWidget->setTabEnabled(10, stage > PROD_STAGE_PLAN);

--- a/src/EditProductTab10.cpp	Wed May 18 08:59:54 2022 +0200
+++ b/src/EditProductTab10.cpp	Wed May 18 17:03:05 2022 +0200
@@ -1,7 +1,7 @@
 /**
  * EditProduct.cpp is part of bmsapp.
  *
- * Tab 2, equipment settings.
+ * Tab 10, fermentation stages.
  *
  * bmsapp is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,3 +18,258 @@
  */
 
 
+void EditProduct::brix_changed(double val)
+{
+    ret_fg = Utils::brix_to_fg(Utils::sg_to_plato(product->brew_fermenter_sg), val);
+    //qDebug() << "brix_changed" << val << product->brew_fermenter_sg << ret_fg;
+}
+
+
+double EditProduct::get_fg(double gravity)
+{
+    QDialog* dialog = new QDialog(this);
+    dialog->resize(360, 110);
+    QDialogButtonBox *buttonBox = new QDialogButtonBox(dialog);
+    buttonBox->setObjectName(QString::fromUtf8("buttonBox"));
+    buttonBox->setGeometry(QRect(30, 60, 300, 32));
+    buttonBox->setLayoutDirection(Qt::LeftToRight);
+    buttonBox->setOrientation(Qt::Horizontal);
+    buttonBox->setStandardButtons(QDialogButtonBox::Cancel|QDialogButtonBox::Ok);
+    buttonBox->setCenterButtons(true);
+
+    QLabel *brixLabel = new QLabel(dialog);
+    brixLabel->setObjectName(QString::fromUtf8("brixLabel"));
+    brixLabel->setText(tr("Refractometer Brix:"));
+    brixLabel->setGeometry(QRect(10, 20, 161, 24));
+    brixLabel->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+
+    QDoubleSpinBox *brixEdit = new QDoubleSpinBox(dialog);
+    brixEdit->setObjectName(QString::fromUtf8("brixEdit"));
+    brixEdit->setGeometry(QRect(180, 20, 101, 24));
+    brixEdit->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+    brixEdit->setAccelerated(true);
+    brixEdit->setDecimals(1);
+    brixEdit->setMaximum(32.0);
+    brixEdit->setSingleStep(0.1);
+    /*
+     * Search the Brix value that is needed to get this gravity.
+     * Set the found value as preset in the spinbox.
+     */
+    double brix = 0.0;
+    for (brix = 0.0; brix < 32.0; brix += 0.1) {
+	if (Utils::brix_to_fg(Utils::sg_to_plato(product->brew_fermenter_sg), brix) >= gravity)
+	    break;
+    }
+    brixEdit->setValue(brix);
+
+    connect(brixEdit, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, &EditProduct::brix_changed);
+    connect(buttonBox, SIGNAL(rejected()), dialog, SLOT(reject()));
+    connect(buttonBox, SIGNAL(accepted()), dialog, SLOT(accept()));
+
+    dialog->setModal(true);
+    dialog->exec();
+    if (dialog->result() == QDialog::Rejected) {
+	ret_fg = gravity;
+    }
+
+    disconnect(brixEdit, nullptr, nullptr, nullptr);
+    disconnect(buttonBox, nullptr, nullptr, nullptr);
+    return ret_fg;
+}
+
+
+void EditProduct::primary_start_changed(double val)
+{
+    product->primary_start_temp = val;
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::primary_peak_changed(double val)
+{
+    product->primary_max_temp = val;
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::primary_end_changed(double val)
+{
+    product->primary_end_temp = val;
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::primary_sg_changed(double val)
+{
+    if (product->primary_end_sg == 0 && val == 0.001) {
+	product->primary_end_sg = 0.990;
+	const QSignalBlocker blocker1(ui->prim_endsgEdit);
+	ui->prim_endsgEdit->setValue(0.990);
+    } else {
+    	product->primary_end_sg = val;
+    }
+    ui->prim_attShow->setValue(Utils::calc_svg(product->brew_fermenter_sg, product->primary_end_sg));
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::primary_sg_button()
+{
+    double rc = get_fg(product->primary_end_sg);
+    ui->prim_endsgEdit->setValue(rc);
+}
+
+
+void EditProduct::primary_date_changed(QDate val)
+{
+    product->primary_end_date = ui->prim_enddateEdit->nullDate();
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::primary_date_button()
+{
+    ui->prim_enddateEdit->setDate(QDate::currentDate());
+}
+
+
+void EditProduct::primary_date_ack()
+{
+    int rc = QMessageBox::warning(this, tr("Confirm primary"), tr("Confirm that the primary fermentation data is correct"),
+                            QMessageBox::Yes | QMessageBox::No, QMessageBox::No);
+
+    if (rc == QMessageBox::No)
+        return;
+
+    product->stage = PROD_STAGE_SECONDARY;
+    setStage();
+    is_changed();
+}
+
+
+void EditProduct::secondary_temp_changed(double val)
+{
+    product->secondary_temp = val;
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::secondary_sg_changed(double val)
+{
+    if (product->secondary_end_sg == 0 && val == 0.001) {
+        product->secondary_end_sg = 0.990;
+        const QSignalBlocker blocker1(ui->sec_sgEdit);
+        ui->sec_sgEdit->setValue(0.990);
+    } else {
+        product->secondary_end_sg = val;
+    }
+    ui->sec_attShow->setValue(Utils::calc_svg(product->brew_fermenter_sg, product->secondary_end_sg));
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::secondary_sg_button()
+{
+    double rc;
+
+    /*
+     * Get a sensible start value.
+     */
+    if (product->secondary_end_sg >= 0.990)
+	rc = get_fg(product->secondary_end_sg);
+    else
+	rc = get_fg(product->primary_end_sg);
+    qDebug() << "secondary_sg_button" << rc << product->secondary_end_sg;
+    ui->sec_sgEdit->setValue(rc);
+}
+
+
+void EditProduct::secondary_date_changed(QDate val)
+{
+    product->secondary_end_date = ui->sec_enddateEdit->nullDate();
+    qDebug() << "secondary_date_changed" << val << product->secondary_end_date;
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::secondary_date_button()
+{
+    ui->sec_enddateEdit->setDate(QDate::currentDate());
+}
+
+
+void EditProduct::secondary_date_ack()
+{
+    int rc = QMessageBox::warning(this, tr("Confirm secondary"), tr("Confirm that the secondary fermentation data is correct"),
+                            QMessageBox::Yes | QMessageBox::No, QMessageBox::No);
+
+    if (rc == QMessageBox::No)
+        return;
+
+    product->stage = PROD_STAGE_TERTIARY;
+    setStage();
+    is_changed();
+}
+
+
+void EditProduct::tertiary_temp_changed(double val)
+{
+    product->tertiary_temp = val;
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::tertiary_sg_changed(double val)
+{
+                qDebug() << "tertiary_sg_changed" << val;
+    if (product->fg == 0 && val == 0.001) {
+        product->fg = 0.990;
+        const QSignalBlocker blocker1(ui->tert_sgEdit);
+        ui->tert_sgEdit->setValue(0.990);
+    } else {
+        product->fg = val;
+    }
+    ui->tert_attShow->setValue(Utils::calc_svg(product->brew_fermenter_sg, product->fg));
+    product->package_abv = Utils::abvol(product->brew_fermenter_sg, product->fg);
+    ui->tert_abvShow->setValue(product->package_abv);
+    ui->pack_abvShow->setValue(product->package_abv);
+    is_changed();
+    setStage();
+}
+
+
+void EditProduct::tertiary_sg_button()
+{
+    double rc;
+
+    /*
+     * Get a sensible start value.
+     */
+    if (product->fg >= 0.990)
+        rc = get_fg(product->fg);
+    else
+        rc = get_fg(product->secondary_end_sg);
+    qDebug() << "tertiary_sg_button" << rc << product->fg;
+    ui->tert_sgEdit->setValue(rc);
+}
+
+
+void EditProduct::ferm_log1_button()
+{
+}
+
+
+void EditProduct::ferm_log2_button()
+{
+}
+
+

--- a/src/EditProductTab3.cpp	Wed May 18 08:59:54 2022 +0200
+++ b/src/EditProductTab3.cpp	Wed May 18 17:03:05 2022 +0200
@@ -440,7 +440,7 @@
     /*
      * Calculate the final values if available.
      */
-    if ((product->stage >= 6) && (product->fg > 0.990) && (product->fg < product->brew_fermenter_sg)) {
+    if ((product->stage >= PROD_STAGE_PACKAGE) && (product->fg > 0.990) && (product->fg < product->brew_fermenter_sg)) {
 
     }
 

--- a/src/EditProductTab7.cpp	Wed May 18 08:59:54 2022 +0200
+++ b/src/EditProductTab7.cpp	Wed May 18 17:03:05 2022 +0200
@@ -509,7 +509,7 @@
     qDebug() << "stepbrix_changed" << product->mashs_row << val << "SG" << Utils::brix_to_sg(val);
 
     if ((product->mashs.at(product->mashs_row).step_sg == 0) && (product->mashs_row > 0)) {
-	/* If not thhe first step, and SG was not set, pickip previous step. */
+	/* If not the first step, and SG was not set, pickup previous step. */
 	val = Utils::sg_to_brix(product->mashs.at(product->mashs_row - 1).step_sg);
 	const QSignalBlocker blocker2(brixEdit);
 	brixEdit->setValue(val);

--- a/src/Utils.cpp	Wed May 18 08:59:54 2022 +0200
+++ b/src/Utils.cpp	Wed May 18 17:03:05 2022 +0200
@@ -239,6 +239,23 @@
 }
 
 
+/*
+ * @brief Calculate Final Gravity.
+ *        Formula by Petr Novotny, Zymurgy July/August 2017.
+ * @param o_plato Original Plato.
+ * @param refracto the refractometer reading.
+ * @return Final gravity.
+ */
+double Utils::brix_to_fg(double o_plato, double refracto)
+{
+    double FBc = refracto / my_brix_correction;
+
+    double rc = round((1 + (0.006276 * FBc) - (0.002349 * o_plato)) * 10000.0) / 10000.0;
+//    qDebug() << "brix_to_plato" << o_plato << refracto << FBc << "rc" << rc;
+    return rc;
+}
+
+
 double Utils::calc_svg(double og, double fg)
 {
     if (og == 0.0 || fg == 0.0)

--- a/ui/EditProduct.ui	Wed May 18 08:59:54 2022 +0200
+++ b/ui/EditProduct.ui	Wed May 18 17:03:05 2022 +0200
@@ -7955,6 +7955,9 @@
         </property>
        </widget>
        <widget class="QLabel" name="brew_ackLabel">
+        <property name="enabled">
+         <bool>true</bool>
+        </property>
         <property name="geometry">
          <rect>
           <x>10</x>
@@ -8002,9 +8005,9 @@
        <widget class="QGroupBox" name="primaryBox">
         <property name="geometry">
          <rect>
-          <x>160</x>
+          <x>140</x>
           <y>30</y>
-          <width>351</width>
+          <width>391</width>
           <height>241</height>
          </rect>
         </property>
@@ -8151,7 +8154,7 @@
           <double>100000.000000000000000</double>
          </property>
          <property name="singleStep">
-          <double>1.000000000000000</double>
+          <double>0.500000000000000</double>
          </property>
         </widget>
         <widget class="QDoubleSpinBox" name="prim_maxCEdit">
@@ -8176,7 +8179,7 @@
           <double>100000.000000000000000</double>
          </property>
          <property name="singleStep">
-          <double>1.000000000000000</double>
+          <double>0.500000000000000</double>
          </property>
         </widget>
         <widget class="QDoubleSpinBox" name="prim_endCEdit">
@@ -8201,7 +8204,7 @@
           <double>100000.000000000000000</double>
          </property>
          <property name="singleStep">
-          <double>1.000000000000000</double>
+          <double>0.500000000000000</double>
          </property>
         </widget>
         <widget class="QDoubleSpinBox" name="prim_endsgEdit">
@@ -8329,13 +8332,33 @@
           <bool>true</bool>
          </property>
         </widget>
+        <widget class="QToolButton" name="prim_ackButton">
+         <property name="geometry">
+          <rect>
+           <x>340</x>
+           <y>170</y>
+           <width>28</width>
+           <height>22</height>
+          </rect>
+         </property>
+         <property name="toolTip">
+          <string>Confirm the brew dates and times.</string>
+         </property>
+         <property name="text">
+          <string>...</string>
+         </property>
+         <property name="icon">
+          <iconset resource="../../../../../../home/mbroek/MyProjects/bmsapp/resources/icons.qrc">
+           <normaloff>:/icons/silk/accept.png</normaloff>:/icons/silk/accept.png</iconset>
+         </property>
+        </widget>
        </widget>
        <widget class="QGroupBox" name="secondaryBox">
         <property name="geometry">
          <rect>
-          <x>610</x>
+          <x>590</x>
           <y>30</y>
-          <width>351</width>
+          <width>391</width>
           <height>151</height>
          </rect>
         </property>
@@ -8412,7 +8435,7 @@
           <double>100000.000000000000000</double>
          </property>
          <property name="singleStep">
-          <double>1.000000000000000</double>
+          <double>0.500000000000000</double>
          </property>
         </widget>
         <widget class="QDoubleSpinBox" name="sec_sgEdit">
@@ -8540,13 +8563,33 @@
           <bool>true</bool>
          </property>
         </widget>
+        <widget class="QToolButton" name="sec_ackButton">
+         <property name="geometry">
+          <rect>
+           <x>340</x>
+           <y>80</y>
+           <width>28</width>
+           <height>22</height>
+          </rect>
+         </property>
+         <property name="toolTip">
+          <string>Confirm the brew dates and times.</string>
+         </property>
+         <property name="text">
+          <string>...</string>
+         </property>
+         <property name="icon">
+          <iconset resource="../../../../../../home/mbroek/MyProjects/bmsapp/resources/icons.qrc">
+           <normaloff>:/icons/silk/accept.png</normaloff>:/icons/silk/accept.png</iconset>
+         </property>
+        </widget>
        </widget>
        <widget class="QGroupBox" name="tertiaryBox">
         <property name="geometry">
          <rect>
-          <x>610</x>
+          <x>590</x>
           <y>200</y>
-          <width>351</width>
+          <width>391</width>
           <height>181</height>
          </rect>
         </property>
@@ -8607,7 +8650,7 @@
           <double>100000.000000000000000</double>
          </property>
          <property name="singleStep">
-          <double>1.000000000000000</double>
+          <double>0.500000000000000</double>
          </property>
         </widget>
         <widget class="QDoubleSpinBox" name="tert_sgEdit">
@@ -9178,7 +9221,7 @@
           <string> %</string>
          </property>
          <property name="decimals">
-          <number>1</number>
+          <number>2</number>
          </property>
          <property name="maximum">
           <double>100.000000000000000</double>