Tue, 03 Oct 2023 17:24:06 +0200
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
0
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
1 | menu "CO2 meter configuration" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
2 | |
77
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
3 | menu "WiFi settings" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
4 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
5 | config ESP_WIFI_SSID |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
6 | string "WiFi SSID" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
7 | default "myssid" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
8 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
9 | SSID (network name) for to connect to. |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
10 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
11 | config ESP_WIFI_PASSWORD |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
12 | string "WiFi Password" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
13 | default "mypassword" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
14 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
15 | WiFi WPA2/WPA3 password to use. |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
16 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
17 | choice ESP_WIFI_SCAN_METHOD |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
18 | prompt "scan method" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
19 | default WIFI_FAST_SCAN |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
20 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
21 | scan method for the esp32 to use |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
22 | config WIFI_FAST_SCAN |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
23 | bool "fast" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
24 | config WIFI_ALL_CHANNEL_SCAN |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
25 | bool "all" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
26 | endchoice |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
27 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
28 | config ESP_FAST_SCAN_MINIMUM_SIGNAL |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
29 | int "WiFi fast scan minimum RSSI" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
30 | range -127 0 |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
31 | default -96 |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
32 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
33 | RSSI minimum reliable level to connect to an AP |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
34 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
35 | config ESP_WIFI_ROAMING_LEVEL |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
36 | int "WiFi RSSI level for alternative AP" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
37 | range -96 -50 |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
38 | default -67 |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
39 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
40 | RSSI level to start looking for a better AP |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
41 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
42 | endmenu |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
43 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
44 | menu "MQTT server" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
45 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
46 | config MQTT_SERVER |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
47 | string "MQTT server" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
48 | default "mqtt.eclipseprojects.io" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
49 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
50 | The MQTT server to connect to |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
51 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
52 | config MQTT_PORT |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
53 | int "MQTT port number" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
54 | default 1883 |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
55 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
56 | The MQTT server port |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
57 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
58 | config MQTT_USER |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
59 | string "MQTT optional username" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
60 | default "" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
61 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
62 | The optional MQTT username. |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
63 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
64 | config MQTT_PASS |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
65 | string "MQTT password" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
66 | default "letmein" |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
67 | help |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
68 | The optional MQTT password for the username. |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
69 | |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
70 | endmenu |
15dc572a7fcb
Version 0.3.0. Backported network code from experimental roaming project. Will now connect after reset to the strongest AP. Id the signal level drops below -67, extra scans are done to see for a better AP. Nothing is done yet. Removed config.conf file, all info is taken from the project menu and live tests. Better log the board type and send it via json mqtt. Send bssid and current channel too.
Michiel Broek <mbroek@mbse.eu>
parents:
37
diff
changeset
|
71 | |
0
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
72 | config ONE_WIRE_BUS |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
73 | int "OneWire Bus GPIO number" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
74 | range 0 34 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
75 | default 25 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
76 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
77 | GPIO number (IOxx) to access the DS18B20 for the bottle temperature semsor. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
78 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
79 | Some GPIOs are used for other purposes (flash connections, etc.) and cannot be used. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
80 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
81 | GPIOs 35-39 are input-only so cannot be used to drive the One Wire Bus. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
82 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
83 | menu "I2C bus" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
84 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
85 | config I2C_MASTER_SCL |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
86 | int "SCL GPIO Num" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
87 | range 0 39 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
88 | default 22 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
89 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
90 | GPIO number for I2C Master clock line. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
91 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
92 | config I2C_MASTER_SDA |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
93 | int "SDA GPIO Num" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
94 | range 0 39 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
95 | default 21 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
96 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
97 | GPIO number for I2C Master data line. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
98 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
99 | config I2C_MASTER_PORT_NUM |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
100 | int "Port Number" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
101 | default 0 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
102 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
103 | Port number for I2C Master device. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
104 | |
37
358bbd5b608e
menuconfig settings now work for I2C display setup. Lot's of code cleanup.
Michiel Broek <mbroek@mbse.eu>
parents:
36
diff
changeset
|
105 | config I2C_MASTER_FREQUENCY |
358bbd5b608e
menuconfig settings now work for I2C display setup. Lot's of code cleanup.
Michiel Broek <mbroek@mbse.eu>
parents:
36
diff
changeset
|
106 | int "Master Frequency" |
358bbd5b608e
menuconfig settings now work for I2C display setup. Lot's of code cleanup.
Michiel Broek <mbroek@mbse.eu>
parents:
36
diff
changeset
|
107 | range 100000 400000 |
358bbd5b608e
menuconfig settings now work for I2C display setup. Lot's of code cleanup.
Michiel Broek <mbroek@mbse.eu>
parents:
36
diff
changeset
|
108 | default 100000 |
358bbd5b608e
menuconfig settings now work for I2C display setup. Lot's of code cleanup.
Michiel Broek <mbroek@mbse.eu>
parents:
36
diff
changeset
|
109 | help |
358bbd5b608e
menuconfig settings now work for I2C display setup. Lot's of code cleanup.
Michiel Broek <mbroek@mbse.eu>
parents:
36
diff
changeset
|
110 | I2C Speed of Master device in Hz. |
0
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
111 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
112 | endmenu |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
113 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
114 | menu "Rotary encoder" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
115 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
116 | config ROT_ENC_A_GPIO |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
117 | int "Rotary Encoder A output GPIO number" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
118 | range 0 39 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
119 | default 27 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
120 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
121 | GPIO number (IOxx) from which to sample the Rotary Encoder 'A' output. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
122 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
123 | Some GPIOs are used for other purposes (flash connections, etc.) and cannot be used. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
124 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
125 | config ROT_ENC_B_GPIO |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
126 | int "Rotary Encoder B output GPIO number" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
127 | range 0 39 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
128 | default 26 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
129 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
130 | GPIO number (IOxx) from which to sample the Rotary Encoder 'B' output. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
131 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
132 | Some GPIOs are used for other purposes (flash connections, etc.) and cannot be used. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
133 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
134 | config ROT_ENC_SW_GPIO |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
135 | int "Rotary Encoder push switch GPIO number" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
136 | range 0 39 |
16
e38ffa806e84
Initial code for the rotary switch and some menus. Changed default pushbutton pin from 12 to 14 and swapped the rotary pins. Disabled always create a new units file, it should be safe to keep it now.
Michiel Broek <mbroek@mbse.eu>
parents:
0
diff
changeset
|
137 | default 14 |
0
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
138 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
139 | GPIO number (IOxx) from which to sample the Rotary Push function output and to |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
140 | wakeup the ESP from deep sleep. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
141 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
142 | Some GPIOs are used for other purposes (flash connections, etc.) and cannot be used. |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
143 | endmenu |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
144 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
145 | menu "ADC channels" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
146 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
147 | config BATT_CHANNEL |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
148 | int "Power monitor analog measurement channel" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
149 | range 4 7 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
150 | default 4 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
151 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
152 | The ADC1 channel to measure the half VDD voltage ladder |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
153 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
154 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
155 | config PRESSURE_1 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
156 | int "Pressure transducer 1" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
157 | range 4 7 |
36
e2a43e7c4035
Swapped ADC channels 6 and 7. Completed the DS18B20 assign to unit.
Michiel Broek <mbroek@mbse.eu>
parents:
16
diff
changeset
|
158 | default 7 |
0
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
159 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
160 | The ADC1 channel to measure the first pressure transducer |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
161 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
162 | config PRESSURE_2 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
163 | int "Pressure transducer 2" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
164 | range 4 7 |
36
e2a43e7c4035
Swapped ADC channels 6 and 7. Completed the DS18B20 assign to unit.
Michiel Broek <mbroek@mbse.eu>
parents:
16
diff
changeset
|
165 | default 6 |
0
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
166 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
167 | The ADC1 channel to measure the second pressure transducer |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
168 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
169 | config PRESSURE_3 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
170 | int "Pressure transducer 3" |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
171 | range 4 7 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
172 | default 5 |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
173 | help |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
174 | The ADC1 channel to measure the third pressure transducer |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
175 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
176 | endmenu |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
177 | |
88d965579617
Initial import of the CO2 meter application.
Michiel Broek <mbroek@mbse.eu>
parents:
diff
changeset
|
178 | endmenu |