thermferm/server.c

/*****************************************************************************
 * Copyright (C) 2008-2014
 *   
 * Michiel Broek <mbroek at mbse dot eu>
 *
 * This file is part of the mbsePi-apps
 *
 * This is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * mbsePi-apps is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with ThermFerm; see the file COPYING.  If not, write to the Free
 * Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
 *****************************************************************************/

#include "rdconfig.h"
#include "thermferm.h"
#include "logger.h"
#include "devices.h"
#include "server.h"
#include "lcd-buffer.h"
#include "xutil.h"


extern int		my_shutdown;
extern int		debug;
extern int		run_pause;
extern int		run_hold;
extern sys_config       Config;
extern const char	UNITMODE[5][8];
extern const char	TEMPSTATE[3][8];
extern const char	DEVTYPE[8][6];
extern const char	DEVPRESENT[4][6];
extern const char	DEVDIR[7][11];
extern const char	PROFSTATE[5][6];


int			s;		/* connected socket			*/
int			ls;		/* listen socket			*/

struct sockaddr_in	myaddr_in;	/* for local socket address             */
struct sockaddr_in	peeraddr_in;	/* for peer socket address              */

struct hostent		*hp;

#define SS_BUFSIZE      1024
#define SS_TIMEOUT      300

#define	MAX_INTERVALS	6
const int	GRAPH_INTERVAL[MAX_INTERVALS] = { 0, 1, 5, 15, 30, 60, };
const int	GRAPH_DATALINES[MAX_INTERVALS] = { 0, 800, 3200, 12000, 24000, 48000, };

/*
 * Send message to client
 */
int srv_send(const char *format, ...)
{
    char        out[SS_BUFSIZE];
    va_list     va_ptr;

    if (s == -1)
	return -1;

    va_start(va_ptr, format);
    vsnprintf(out, SS_BUFSIZE-1, format, va_ptr);
    va_end(va_ptr);

    if (debug) {
	syslog(LOG_NOTICE, "send: \"%s\"", out);
	fprintf(stdout, "send: \"%s\"\n", out);
    }

    if (send(s, out, strlen(out), 0) != strlen(out)) {
	syslog(LOG_NOTICE, "srv_send failed");
	return -1;
    }
    
    if (send(s, (char *)"\r\n", 2, 0) != 2) {
	syslog(LOG_NOTICE, "srv_send failed");
	return -1;
    }

    return 0;
}


/*
 * Update the device inuse counter.
 */
void device_count(int plus, char *uuid)
{
    devices_list	*device;

    for (device = Config.devices; device; device = device->next) {
	if (strcmp(device->uuid, uuid) == 0) {
#ifdef HAVE_WIRINGPI_H
	    piLock(LOCK_DEVICES);
#endif
	    if (plus == TRUE) {
		device->inuse++;
	    } else {
		if (device->inuse)
		    device->inuse--;
	    }
#ifdef HAVE_WIRINGPI_H
	    piUnlock(LOCK_DEVICES);
#endif
	}
    }
}


int delete_Profile(char *uuid)
{
    profiles_list	*current = Config.profiles;
    profiles_list	*previous = NULL;
    prof_step		*step, *olds;

    while (current) {
	if (strcmp(current->uuid, uuid) == 0) {
	    if (previous == NULL) {
		Config.profiles = current->next;
		free(current->uuid);
		current->uuid = NULL;
		free(current->name);
		current->name = NULL;
		if (current->steps) {
		    for (step = current->steps; step; step = olds) {
			olds = step->next;
			free(step);
		    }
		    current->steps = NULL;
		}
		free(current);
		return 1;
	    } else {
		free(current->uuid);
		current->uuid = NULL;
		free(current->name);
		current->name = NULL;
		if (current->steps) {
		    for (step = current->steps; step; step = olds) {
			olds = step->next;
			free(step);
		    }
		    current->steps = NULL;
		}
		previous->next = current->next;
		free(current);
		current = previous->next;
		return 1;
	    }
	} else {
	    previous = current;
	    current = current->next;
	}
    }

    return 0;
}


int delete_Device(char *uuid)
{
    devices_list	*current = Config.devices;
    devices_list	*previous = NULL;

    while (current) {
	if (strcmp(current->uuid, uuid) == 0) {
	    if (previous == NULL) {
		Config.devices = current->next;
		free(current->uuid);
		current->uuid = NULL;
		free(current->address);
		current->address = NULL;
		free(current->description);
		current->description = NULL;
		free(current->comment);
		current->comment = NULL;
		free(current);
		return 1;
	    } else {
		free(current->uuid);
		current->uuid = NULL;
		free(current->address);
		current->address = NULL;
		free(current->description);
		current->description = NULL;
		free(current->comment);
		current->comment = NULL;
		previous->next = current->next;
		free(current);
		current = previous->next;
		return 1;
	    }
	} else {
	    previous = current;
	    current = current->next;
	}
    }
    return 0;
}


/*
 * DEVICE ADD type
 * DEVICE DEL uuid
 * DEVICE LIST
 * DEVICE GET uuid
 * DEVICE PUT uuid
 */
int cmd_device(char *buf)
{
    char		*opt, *param, *kwd, *val, ibuf[SS_BUFSIZE];
    devices_list	*device, *tmpd;
    socklen_t		fromlen;
    int			i, rc, rlen, ival;
    uuid_t		uu;

    opt = strtok(buf, " \0");
    opt = strtok(NULL, " \0");

    if (opt == NULL) {
	srv_send((char *)"501 Subcommand missing");
	return 1;
    }
    param = strtok(NULL, "\0");

    if (strcmp(opt, (char *)"LIST") == 0) {
	srv_send((char *)"212 Devices list follows:");
	for (device = Config.devices; device; device = device->next) {
	    srv_send((char *)"%s,%s,%d,%d,%s,%s", device->uuid, device->address, device->subdevice, device->inuse, device->comment, DEVDIR[device->direction]);
	}
	srv_send((char *)".");
	return 1;
    }

    if (param == NULL) {
	srv_send((char *)"502 Parameter missing");
	return 1;
    }

    if (strcmp(opt, (char *)"ADD") == 0) {
	if ((strcmp(param, (char *)"RC433") == 0) || (strcmp(param, (char *)"DHT") == 0) ||
	    (strcmp(param, (char *)"I2C") == 0) || (strcmp(param, (char *)"SPI") == 0)) {

	    device = (devices_list *)malloc(sizeof(devices_list));
	    device->next = NULL;
	    device->version = 1;
	    device->uuid = malloc(37);
	    uuid_generate(uu);
	    uuid_unparse(uu, device->uuid);
	    for (i = 0; i < 8; i++) {
		if (strcmp(param, DEVTYPE[i]) == 0) {
		    device->type = i;
		    break;
		}
	    }
	    device->direction = DEVDIR_UNDEF;
	    device->value = device->offset = device->subdevice = device->inuse = 0;
	    device->present = DEVPRESENT_UNDEF;
	    device->address = xstrcpy((char *)"Enter address here");
	    device->gpiopin = -1;
	    device->description = xstrcpy((char *)"Describe me here");
	    device->comment = xstrcpy((char *)"Comment here");

#ifdef HAVE_WIRINGPI_H
	    piLock(LOCK_DEVICES);
#endif
	    if (Config.devices == NULL) {
		Config.devices = device;
	    } else {
	        for (tmpd = Config.devices; tmpd; tmpd = tmpd->next) {
	    	    if (tmpd->next == NULL) {
	    		tmpd->next = device;
    			break;
		    }
		}
	    }
#ifdef HAVE_WIRINGPI_H
	    piUnlock(LOCK_DEVICES);
#endif
	    syslog(LOG_NOTICE, "Device %s added", device->uuid);
	    srv_send((char *)"211 Device %s added", device->uuid);
	    return 0;

	} else {
	    srv_send((char *)"503 Parameter error");
	    return 1;
	}
    }

    if (strcmp(opt, (char *)"DEL") == 0) {
	
#ifdef HAVE_WIRINGPI_H
	piLock(LOCK_DEVICES);
#endif
	rc = delete_Device(param);
#ifdef HAVE_WIRINGPI_H
	piUnlock(LOCK_DEVICES);
#endif
	if (rc) {
	    syslog(LOG_NOTICE, "Device %s deleted", param);
	    srv_send((char *)"211 Device %s deleted", param);
	    return 0;
	} else {
	    srv_send((char *)"440 No such device");
	    return 1;
	}
    }

    if (strcmp(opt, (char *)"GET") == 0) {
	for (device = Config.devices; device; device = device->next) {
	    if (strcmp(device->uuid, param) == 0) {
		srv_send((char *)"213 Device record follows:");
		srv_send((char *)"TYPE,%s", DEVTYPE[device->type]);
		srv_send((char *)"DIRECTION,%s", DEVDIR[device->direction]);
		srv_send((char *)"VALUE,%d", device->value);
		srv_send((char *)"OFFSET,%d", device->offset);
		srv_send((char *)"PRESENT,%s", DEVPRESENT[device->present]);
		srv_send((char *)"ADDRESS,%s", device->address);
		srv_send((char *)"SUBDEVICE,%d", device->subdevice);
		srv_send((char *)"GPIOPIN,%d", device->gpiopin);
		srv_send((char *)"DESCRIPTION,%s", device->description);
		srv_send((char *)"INUSE,%d", device->inuse);
		srv_send((char *)"COMMENT,%s", device->comment);
		srv_send((char *)"TIMESTAMP,%d", (int)device->timestamp);
		srv_send((char *)".");
		return 1;
	    }
	}
	srv_send((char *)"440 No such device");
	return 1;
    }

    if (strcmp(opt, (char *)"PUT") == 0) {
	for (device = Config.devices; device; device = device->next) {
	    if (strcmp(device->uuid, param) == 0) {
		while (1) {
		    memset((char *)&ibuf, 0, SS_BUFSIZE);
		    fromlen = sizeof(peeraddr_in);
		    rlen = recvfrom(s, ibuf, sizeof(ibuf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
		    if (rlen == -1) {
			syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
			srv_send((char *)"518 recfrom(): %s", strerror(errno));
			return 1;
		    }
		    for (i = 0; i < strlen(ibuf); i++) {
			if (ibuf[i] == '\n')
			    ibuf[i] = '\0';
			if (ibuf[i] == '\r')
			    ibuf[i] = '\0';
		    }
		    for (i = strlen(ibuf) -1; i > 0; i--) {
			if (ibuf[i] == ' ')
			    ibuf[i] = '\0';
			else
			    break;
		    }
		    if (strlen(ibuf)) {
			if (debug) {
			    syslog(LOG_NOTICE, "recv: \"%s\"", ibuf);
			    fprintf(stdout, "recv: \"%s\"\n", ibuf);
			}
			if (strcmp(ibuf, (char *)".") == 0) {
			    srv_send((char *)"219 Accepted Device record");
			    return 0;
			}
			kwd = strtok(ibuf, ",\0");
			val = strtok(NULL, "\0");
			if (kwd && val) {
			    if (strcmp(kwd, (char *)"TYPE") == 0) {
				for (i = 0; i < 8; i++) {
				    if (strcmp(val, DEVTYPE[i]) == 0) {
					if (device->type != i)
					    syslog(LOG_NOTICE, "Device %s changed type %s to %s", device->uuid, DEVTYPE[device->type], DEVTYPE[i]);
					device->type = i;
					break;
				    }
				}

			    } else if (strcmp(kwd, (char *)"DIRECTION") == 0) {
				for (i = 0; i < 7; i++) {
				    if (strcmp(val, DEVDIR[i]) == 0) {
					if (device->direction != i)
					    syslog(LOG_NOTICE, "Device %s changed direction %s to %s", device->uuid, DEVDIR[device->type], DEVDIR[i]);
					device->direction = i;
					break;
				    }
				}

			    } else if (strcmp(kwd, (char *)"VALUE") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (device->value != ival)
					syslog(LOG_NOTICE, "Device %s changed value %d to %d", device->uuid, device->value, ival);
				    device->value = ival;
				}

			    } else if (strcmp(kwd, (char *)"OFFSET") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (device->offset != ival)
					syslog(LOG_NOTICE, "Device %s changed offset %d to %d", device->uuid, device->offset, ival);
				    device->offset = ival;
				}

			    } else if (strcmp(kwd, (char *)"PRESENT") == 0) {
				for (i = 0; i < 4; i++) {
				    if (strcmp(val, DEVPRESENT[i]) == 0) {
					if (device->present != i)
					    syslog(LOG_NOTICE, "Device %s changed present %s to %s", device->uuid, DEVPRESENT[device->present], DEVPRESENT[i]);
					device->present = i;
				        break;
				    }
				}

			    } else if (strcmp(kwd, (char *)"ADDRESS") == 0) {
				if (device->address) {
				    if (strcmp(device->address, val))
					syslog(LOG_NOTICE, "Device %s changed address `%s' to `%s'", device->uuid, device->address, val);
				    free(device->address);
				}
				device->address = xstrcpy(val);

			    } else if (strcmp(kwd, (char *)"SUBDEVICE") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (device->subdevice != ival)
					syslog(LOG_NOTICE, "Device %s changed subdevice %d to %d", device->uuid, device->subdevice, ival);
				    device->subdevice = ival;
				}

			    } else if (strcmp(kwd, (char *)"GPIOPIN") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (device->gpiopin != ival)
					syslog(LOG_NOTICE, "Device %s changed gpiopin %d to %d", device->uuid, device->gpiopin, ival);
				    device->gpiopin = ival;
				}

			    } else if (strcmp(kwd, (char *)"DESCRIPTION") == 0) {
				if (device->description) {
				    if (strcmp(device->description, val))
					syslog(LOG_NOTICE, "Device %s changed description `%s' to `%s'", device->uuid, device->description, val);
				    free(device->description);
				}
				device->description = xstrcpy(val);

			    } else if (strcmp(kwd, (char *)"COMMENT") == 0) {
				if (device->comment) {
				    if (strcmp(device->comment, val))
					syslog(LOG_NOTICE, "Device %s changed comment `%s' to `%s'", device->uuid, device->comment, val);
				    free(device->comment);
				}
				device->comment = xstrcpy(val);

			    }
			}
		    }
		}
	    }
	}
	srv_send((char *)"440 No such device");
	return 1;
    }

    srv_send((char *)"504 Subcommand error");
    return 1;
}


/*
 * GLOBAL GET
 * GLOBAL PUT
 */
int cmd_global(char *buf)
{
    char	*opt, *kwd, *val, ibuf[SS_BUFSIZE];
    int		ival, i, rlen;
    socklen_t	fromlen;

    opt = strtok(buf, " \0");
    opt = strtok(NULL, "\0");

    if (opt == NULL) {
	srv_send((char *)"501 Subcommand missing");
	return 1;
    }

    if (strcmp(opt, (char *)"GET") == 0) {
	srv_send((char *)"213 Global Settings record follows:");
	srv_send((char *)"RELEASE,%s", VERSION);
	srv_send((char *)"NAME,%s", Config.name);
	srv_send((char *)"PORT,%d", Config.my_port);
	srv_send((char *)"TEMPFORMAT,%c", Config.tempFormat);
	srv_send((char *)"TEMP_ADDRESS,%s", Config.temp_address);
	srv_send((char *)"TEMP_STATE,%s", TEMPSTATE[Config.temp_state]);
	srv_send((char *)"TEMP_VALUE,%.1f", Config.temp_value / 1000.0);
	srv_send((char *)"HUM_ADDRESS,%s", Config.hum_address);
	srv_send((char *)"HUM_STATE,%s", TEMPSTATE[Config.hum_state]);
	srv_send((char *)"HUM_VALUE,%.0f", Config.hum_value / 1000.0);
#ifdef HAVE_WIRINGPI_H
	srv_send((char *)"LCD_COLS,%d", Config.lcd_cols);
	srv_send((char *)"LCD_ROWS,%d", Config.lcd_rows);
#endif
	srv_send((char *)".");
	return 1;
    }

    if (strcmp(opt, (char *)"PUT") == 0) {
	while (1) {
	    memset((char *)&ibuf, 0, SS_BUFSIZE);
	    fromlen = sizeof(peeraddr_in);
	    rlen = recvfrom(s, ibuf, sizeof(ibuf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
	    if (rlen == -1) {
		syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
		srv_send((char *)"518 recfrom(): %s", strerror(errno));
		return 1;
	    }
	    for (i = 0; i < strlen(ibuf); i++) {
		if (ibuf[i] == '\n')
		    ibuf[i] = '\0';
		if (ibuf[i] == '\r')
		    ibuf[i] = '\0';
	    }
	    for (i = strlen(ibuf) -1; i > 0; i--) {
		if (ibuf[i] == ' ')
		    ibuf[i] = '\0';
		else
		    break;
	    }
	    if (strlen(ibuf)) {
		if (debug) {
		    syslog(LOG_NOTICE, "recv: \"%s\"", ibuf);
		    fprintf(stdout, "recv: \"%s\"\n", ibuf);
		}
		if (strcmp(ibuf, (char *)".") == 0) {
		    srv_send((char *)"219 Accepted Global record");
		    return 0;
		}
		kwd = strtok(ibuf, ",\0");
		val = strtok(NULL, "\0");
		if (kwd) {
		    if (strcmp(kwd, (char *)"NAME") == 0) {
			if (val && Config.name && strcmp(val, Config.name))
			    syslog(LOG_NOTICE, "Global name `%s' to `%s'", Config.name, val);
			if (Config.name)
			    free(Config.name);
			if (val)
			    Config.name = xstrcpy(val);
			else
			    Config.name = NULL;

		    } else if (val && (strcmp(kwd, (char *)"PORT") == 0)) {
			if (sscanf(val, "%d", &ival) == 1) {
			    if (Config.my_port != ival)
			    	syslog(LOG_NOTICE, "Global port %d to %d", Config.my_port, ival);
			    Config.my_port = ival;
			}

		    } else if (val && (strcmp(kwd, (char *)"TEMPFORMAT") == 0)) {
			if ((val[0] == 'C') || (val[0] == 'F')) {
			    if (Config.tempFormat != val[0])
				syslog(LOG_NOTICE, "Global port %c to %c", Config.tempFormat, val[0]);
			    Config.tempFormat = val[0];
			}

		    } else if (strcmp(kwd, (char *)"TEMP_ADDRESS") == 0) {
			if (val && Config.temp_address && (strcmp(val, Config.temp_address)))
			    syslog(LOG_NOTICE, "Global temperature address `%s' to `%s'", Config.temp_address, val);
		        if (Config.temp_address) {
			    device_count(FALSE, Config.temp_address);
			    free(Config.temp_address);
			}
			if (val) {
			    Config.temp_address = xstrcpy(val);
			    device_count(TRUE, Config.temp_address);
			} else
			    Config.temp_address = NULL;

		    } else if (strcmp(kwd, (char *)"HUM_ADDRESS") == 0) {
			if (val && Config.hum_address && (strcmp(val, Config.hum_address)))
			    syslog(LOG_NOTICE, "Global humidity address `%s' to `%s'", Config.hum_address, val);
			if (Config.hum_address) {
			    device_count(FALSE, Config.hum_address);
			    free(Config.hum_address);
			}
			if (val) {
			    Config.hum_address = xstrcpy(val);
			    device_count(TRUE, Config.hum_address);
			} else
			    Config.hum_address = NULL;

#ifdef HAVE_WIRINGPI_H
		    } else if (val && (strcmp(kwd, (char *)"LCD_COLS") == 0)) {
			if (sscanf(val, "%d", &ival) == 1) {
			    if (Config.lcd_cols != ival)
				syslog(LOG_NOTICE, "Global LCD columns %d to %d", Config.lcd_cols, ival);
			    Config.lcd_cols = ival;
			}

		    } else if (val && (strcmp(kwd, (char *)"LCD_ROWS") == 0)) {
			if (sscanf(val, "%d", &ival) == 1) {
			    if (Config.lcd_rows != ival)
				syslog(LOG_NOTICE, "Global LCD rows %d to %d", Config.lcd_rows, ival);
			    Config.lcd_rows = ival;
			}
#endif
		    }
		}
	    }
	}
    }

    srv_send((char *)"504 Subcommand error");
    return 1;
}


/*
 * LIST
 * LIST LOG
 */
int cmd_list(char *buf)
{
    char		*opt, *param, *filename, q[5], buffer[256], outbuf[256];
    char		*date_n, *mode_n, *air_n, *beer_n, *target_n, *heater_n, *cooler_n;
    char		*heater_u, *cooler_u;
    int			heater_l = 0, cooler_l = 0, h = 0, c = 0, heat_used = 0, cool_used = 0, lines = 0, graphstep = 0;
    units_list		*unit;
    FILE		*fp;

    opt = strtok(buf, " \0");
    opt = strtok(NULL, " \0");

    if (opt == NULL) {
	/*
	 * Default, list available units
	 */
	srv_send((char *)"212 Fermenter list follows:");
	for (unit = Config.units; unit; unit = unit->next) {
	    srv_send((char *)"%s,%s,%s", unit->uuid, unit->name, UNITMODE[unit->mode]);
	}
	srv_send((char *)".");
	return 1;

    } else if (strcmp(opt, (char *)"LOG") == 0) {

	param = strtok(NULL, "\0");
	if (param == NULL) {
	    srv_send((char *)"502 Parameter missing");
	    return 1;
	}

	q[0] = q[1] = q[2] = q[3] = q[4] = 'a';
	for (unit = Config.units; unit; unit = unit->next) {
	    if (strcmp(param, unit->uuid) == 0)
		break;
	}

	srv_send((char *)"212 Logfile list follows:");
	if (getenv((char *)"USER") == NULL) {
	    filename = xstrcpy((char *)"/root");
	} else {
	    filename = xstrcpy(getenv((char *)"HOME"));
	}
	filename = xstrcat(filename, (char *)"/.thermferm/log/");
	filename = xstrcat(filename, unit->name);
	filename = xstrcat(filename, (char *)".log");
	if ((fp = fopen(filename, "r"))) {

	    /*
	     * Count the lines in the logfile
	     */
	    lines = 0;
	    while (fgets(buffer, sizeof(buffer)-1, fp) != NULL) {
		lines++;
	    }
	    fseek(fp, 0L, SEEK_SET);
	    /*
	     * We have counted the lines in the logfile including the header lines.
	     * The header lines should be ignored but there are so few of them, we
	     * just include them in the total.
	     * Now find a reasonable interval of lines to sent to the client.
	     */
	    for (graphstep = 1; graphstep <= MAX_INTERVALS; graphstep++) {
		if (lines < GRAPH_DATALINES[graphstep]) {
		    break;
		}
	    }
	    syslog(LOG_NOTICE, "LIST LOG %s: lines=%d, interval=%d, graphstep=%d", unit->name, lines, GRAPH_INTERVAL[graphstep], graphstep);

	    while (fgets(buffer, sizeof(buffer)-1, fp) != NULL) {
		/*
		 * 2014-11-15 18:39,BEER,20.312,19.750,20.0,0,NA,NA,NA,78105,NA,NA
		 */
		q[0] = buffer[11];
		q[1] = buffer[12];
		q[2] = buffer[14];
		q[3] = buffer[15];
		buffer[strlen(buffer) -1] = '\0';
		date_n = strtok(buffer, ",\0");	/* timestamp		*/
		mode_n = strtok(NULL, ",\0");	/* unit mode		*/
		air_n = strtok(NULL, ",\0");	/* air temp		*/
		beer_n = strtok(NULL, ",\0");	/* beer temp		*/
		target_n = strtok(NULL, ",\0"); /* target temp		*/
		heater_n = strtok(NULL, ",\0");	/* current heater state	*/
		cooler_n = strtok(NULL, ",\0");	/* current cooler state	*/
		heater_u = strtok(NULL, ",\0");	/* current fan state	*/
		heater_u = strtok(NULL, ",\0");	/* current door state	*/
		heater_u = strtok(NULL, ",\0");	/* heater use counter	*/
		cooler_u = strtok(NULL, ",\0");	/* cooler use counter	*/

		if (strncmp(mode_n, (char *)"Mode", 4)) {
		    /*
		     * Output a line at the right intervals
		     */
		    if (((graphstep == 1)) ||
			((graphstep == 2) && (q[3] == '0' || q[3] == '5')) ||
			((graphstep == 3) && ((q[2] == '0' && q[3] == '0') || (q[2] == '1' && q[3] == '5') || (q[2] == '3' && q[3] == '0') || (q[2] == '4' && q[3] == '5'))) ||
			((graphstep == 4) && ((q[2] == '0' && q[3] == '0') || (q[2] == '3' && q[3] == '0'))) ||
			((graphstep == 5) && (q[2] == '0' && q[3] == '0')) ) {
			heat_used = cool_used = 0;
			if (strcmp(heater_u, "NA") && (sscanf(heater_u, "%d", &h) == 1)) {
			    if (h && heater_l) {
				heat_used = ((h - heater_l) * 100) / (GRAPH_INTERVAL[graphstep] * 60);
			    }
			}
			if (strcmp(cooler_u, "NA") && (sscanf(cooler_u, "%d", &c) == 1)) {
			    if (c && cooler_l) {
				cool_used = ((c - cooler_l) * 100) / (GRAPH_INTERVAL[graphstep] * 60);
			    }
			}
			snprintf(outbuf, 255, "%s,%s,%s,%s,%s,%s,%s,%d,%d", 
					    date_n, mode_n, air_n, beer_n, target_n, heater_n, cooler_n, heat_used, cool_used);
		    	srv_send(outbuf);
			if (h && strcmp(heater_u, "NA"))
			    heater_l = h;
			if (c & strcmp(cooler_u, "NA"))
			    cooler_l = c;
		    }
	    	}
	    }
	}
	free(filename);
	filename = NULL;
	srv_send((char *)".");
	return 1;
    }

    srv_send((char *)"504 Subcommand error");
    return 1;
}


/*
 * PROFILE ADD name	Add a new profile
 * PROFILE DEL uuid	Delete profile with uuid
 * PROFILE LIST		List available profiles
 * PROFILE GET uuid     Get profile record
 * PROFILE PUT uuid     Put profile record
 * PROFILE GETS uuid	Get profile steps list
 * PROFILE PUTS uuid	Put profile steps list
 */
int cmd_profile(char *buf)
{
    char                ibuf[SS_BUFSIZE], *sstep, *rest, *targ, *param, *kwd, *val;
    int                 i, j, rlen, istep, irest;
    float		ftarg, fval;
    socklen_t           fromlen;
    char		*opt;
    profiles_list	*profile, *tmpp;
    prof_step		*step, *olds;
    uuid_t		uu;

    opt = strtok(buf, " \0");
    opt = strtok(NULL, " \0");

    if (opt == NULL) {
	srv_send((char *)"501 Subcommand missing");
	return 1;
    }

    if (strcmp(opt, (char *)"LIST") == 0) {
	/*
	 * Fermenting profiles
	 */
	srv_send((char *)"212 Profiles list follows:");
	for (profile = Config.profiles; profile; profile = profile->next) {
	    j = 0;
	    for (step = profile->steps; step; step = step->next)
		j++;
	    srv_send((char *)"%s,%s,%d,%d", profile->uuid, profile->name, j, profile->busy);
	}
	srv_send((char *)".");
	return 1;
    }

    param = strtok(NULL, "\0");
    if (param == NULL) {
	srv_send((char *)"502 Parameter missing");
	return 1;
    }

    if (strcmp(opt, (char *)"ADD") == 0) {
	profile = (profiles_list *)malloc(sizeof(profiles_list));
	profile->next = NULL;
	profile->version = 1;
	profile->uuid = malloc(37);
	uuid_generate(uu);
	uuid_unparse(uu, profile->uuid);
	profile->name = xstrcpy(param);
	profile->busy = 0;
	profile->inittemp = 20.0;
	profile->steps = NULL;
	if (Config.profiles == NULL) {
	    Config.profiles = profile;
	} else {
	    for (tmpp = Config.profiles; tmpp; tmpp = tmpp->next) {
		if (tmpp->next == NULL) {
		    tmpp->next = profile;
		    break;
		}
	    }
	}

	syslog(LOG_NOTICE, "Profile %s added", profile->uuid);
	srv_send((char *)"211 Profile %s added", profile->uuid);
	return 0;


    } else if (strcmp(opt, (char *)"DEL") == 0) {
	if (delete_Profile(param)) {
	    syslog(LOG_NOTICE, "Profile %s deleted", param);
	    srv_send((char *)"211 Profile %s deleted", param);
	    return 0;
	} else {
	    srv_send((char *)"440 No such profile");
	    return 1;
	}
    
    } else if (strcmp(opt, (char *)"GET") == 0) {
	for (profile = Config.profiles; profile; profile = profile->next) {
	    if (strcmp(profile->uuid, param) == 0) {
		srv_send((char *)"213 Profile record follows:");
		srv_send((char *)"UUID,%s", profile->uuid);
		srv_send((char *)"NAME,%s", profile->name);
		srv_send((char *)"INITTEMP,%.1f", profile->inittemp);
		srv_send((char *)".");
		return 1;
	    }
	}
	srv_send((char *)"440 No such profile");
	return 1;

    } else if (strcmp(opt, (char *)"PUT") == 0) {
	for (profile = Config.profiles; profile; profile = profile->next) {
	    if (strcmp(profile->uuid, param) == 0) {
		while (1) {
		    memset((char *)&ibuf, 0, SS_BUFSIZE);
		    fromlen = sizeof(peeraddr_in);
		    rlen = recvfrom(s, ibuf, sizeof(ibuf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
		    if (rlen == -1) {
			syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
			srv_send((char *)"518 recfrom(): %s", strerror(errno));
			return 1;
		    }
		    for (i = 0; i < strlen(ibuf); i++) {
			if (ibuf[i] == '\n')
			    ibuf[i] = '\0';
			if (ibuf[i] == '\r')
			    ibuf[i] = '\0';
		    }
		    for (i = strlen(ibuf) -1; i > 0; i--) {
			if (ibuf[i] == ' ')
			    ibuf[i] = '\0';
			else
			    break;
		    }
		    if (strlen(ibuf)) {
			if (debug) {
			    syslog(LOG_NOTICE, "recv: \"%s\"", ibuf);
			    fprintf(stdout, "recv: \"%s\"\n", ibuf);
			}
			if (strcmp(ibuf, (char *)".") == 0) {
			    srv_send((char *)"219 Accepted Profile record");
			    return 0;
			}
			kwd = strtok(ibuf, ",\0");
			val = strtok(NULL, "\0");
			if (kwd && val) {
			    if (strcmp(kwd, (char *)"NAME") == 0) {
				if (profile->name) {
				    if (strcmp(profile->name, val))
					syslog(LOG_NOTICE, "Profile %s name `%s' to `%s'", profile->uuid, profile->name, val);
				    free(profile->name);
				}
				profile->name = xstrcpy(val);
			    } else if (strcmp(kwd, (char *)"INITTEMP") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (profile->inittemp != fval)
					syslog(LOG_NOTICE, "Profile %s initial temperature %.1f to %.1f", profile->uuid, profile->inittemp, fval);
				    profile->inittemp = fval;
				}
			    }
			}
		    }
		}
	    }               
	}
	srv_send((char *)"440 No such profile");
	return 1;

    } else if (strcmp(opt, (char *)"GETS") == 0) {

	for (profile = Config.profiles; profile; profile = profile->next) {
	    if (strcmp(profile->uuid, param) == 0) {
		srv_send((char *)"215 Profile steps follow:");
		for (step = profile->steps; step; step = step->next) {
		    srv_send((char *)"%d,%d,%.1f", step->steptime, step->resttime, step->target);
		}
		srv_send((char *)".");
		return 1;
	    }
	}

	srv_send((char *)"440 No such profile");
	return 1;

    } else if (strcmp(opt, (char *)"PUTS") == 0) {

	for (profile = Config.profiles; profile; profile = profile->next) {
	    if (strcmp(profile->uuid, param) == 0) {

		if (profile->steps) {
		    syslog(LOG_NOTICE, "PROFILE PUTS %s erased all old steps", profile->uuid);
		    for (step = profile->steps; step; step = olds) {
			olds = step->next;
			free(step);
		    }
		    profile->steps = NULL;		    
		}

		j = 0;
            	while (1) {	
	    	    memset((char *)&ibuf, 0, SS_BUFSIZE);
            	    fromlen = sizeof(peeraddr_in);
	    	    rlen = recvfrom(s, ibuf, sizeof(ibuf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
	    	    if (rlen == -1) {
	    	    	syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
		    	srv_send((char *)"518 recfrom(): %s", strerror(errno));
		    	return 1;
	    	    } else {
	    	    	for (i = 0; i < strlen(ibuf); i++) {
		            if (ibuf[i] == '\n')
		    	    	ibuf[i] = '\0';
		    	    if (ibuf[i] == '\r')
		    	    	ibuf[i] = '\0';
	                }
	                for (i = strlen(ibuf) -1; i > 0; i--) {
		    	    if (ibuf[i] == ' ')
		    	    	ibuf[i] = '\0';
		    	    else
		     	    	break;
	    	    	}
	    	    	if (strlen(ibuf)) {
		    	    if (debug) {
		    	    	syslog(LOG_NOTICE, "recv: \"%s\"", ibuf);
		    	    	fprintf(stdout, "recv: \"%s\"\n", ibuf);
		    	    }
		    	    if (strcmp(ibuf, (char *)".") == 0) {

		    	    	srv_send((char *)"219 Accepted Profile steps");
		    	    	return 0;
		    	    }
			    sstep = strtok(ibuf, ",\0");
			    rest = strtok(NULL, ",\0");
			    targ = strtok(NULL, "\0");

			    if ((sscanf(sstep, "%d", &istep) == 1) &&
				(sscanf(rest, "%d", &irest) == 1) &&
				(sscanf(targ, "%f", &ftarg) == 1)) {

				j++;
				syslog(LOG_NOTICE, "PROFILE PUTS %s add step %d: steptime=%d resttime=%d target=%.1f", 
						profile->uuid, j, istep, irest, ftarg);
				step = (prof_step *)malloc(sizeof(prof_step));
				step->next = NULL;
				step->version = 1;
				step->steptime = istep;
				step->resttime = irest;
				step->target = ftarg;

				if (profile->steps == NULL) {
				    profile->steps = step;
				} else {
				    for (olds = profile->steps; olds; olds = olds->next) {
					if (olds->next == NULL) {
					    olds->next = step;
					    break;
					}
				    }
				}
			    }
		    	}
	    	    }
		}
	    }
	}

	srv_send((char *)"440 No such profile");
	return 1;
    }

    srv_send((char *)"504 Subcommand error");
    return 1;
}


#ifdef USE_SIMULATOR
int delete_Simulator(char *uuid)
{
    simulator_list	*current = Config.simulators;
    simulator_list	*previous = NULL;

    while (current) {
	if (strcmp(current->uuid, uuid) == 0) {
	    if (previous == NULL) {
		Config.simulators = current->next;
	    	free(current->uuid);
	    	current->uuid = NULL;
	    	free(current->name);
	    	current->name = NULL;
	    	free(current);
	    	return 1;
	    } else {
		free(current->uuid);
		current->uuid = NULL;
		free(current->name);
		current->name = NULL;
		previous->next = current->next;
		free(current);
		current = previous->next;
		return 1;
	    }
	} else {
	    previous = current;
	    current = current->next;
	}
    }
    return 0;
}


/*
 * SIMULATOR ADD name
 * SIMULATOR DEL uuid
 * SIMULATOR LIST
 * SIMULATOR GET uuid
 * SIMULATOR PUT uuid
 */
int cmd_simulator(char *buf)
{
    char		*opt, *param, *kwd, *val, ibuf[SS_BUFSIZE];
    simulator_list	*simulator, *tmps;
    socklen_t		fromlen;
    int			i, rc, rlen, ival;
    float		fval;
    uuid_t		uu;

    opt = strtok(buf, " \0");
    opt = strtok(NULL, " \0");

    if (opt == NULL) {
	srv_send((char *)"501 Subcommand missing");
	return 1;
    }
    param = strtok(NULL, "\0");

    if (strcmp(opt, (char *)"LIST") == 0) {
	srv_send((char *)"212 Simulators list follows:");
	for (simulator = Config.simulators; simulator; simulator = simulator->next) {
	    srv_send((char *)"%s,%s", simulator->uuid, simulator->name);
	}
	srv_send((char *)".");
	return 1;
    }

    if (param == NULL) {
	srv_send((char *)"502 Parameter missing");
	return 1;
    }

    if (strcmp(opt, (char *)"ADD") == 0) {

	/*
	 * For now, only one simulator is allowed.
	 */
	if (Config.simulators) {
	    srv_send((char *)"441 Maximum simulators reached");
	    return 1;
	}

	simulator = (simulator_list *)malloc(sizeof(simulator_list));
	simulator->next = NULL;
	simulator->version = 1;
	simulator->uuid = malloc(37);
	uuid_generate(uu);
	uuid_unparse(uu, simulator->uuid);
	simulator->name = xstrcpy(param);
	simulator->volume_air = 150;
	simulator->volume_beer = 50;
	simulator->room_temperature = simulator->air_temperature = simulator->beer_temperature = simulator->s_cool_temp = simulator->s_heat_temp = 20.0;
	simulator->cooler_temp = -3.0;	/* Cooling temperature */
	simulator->cooler_time = 720;	/* About 12 minutes for the cooler plate */
	simulator->cooler_size = 0.8;	/* 0.8 square meter cooler plate */
	simulator->heater_temp = 150.0;	/* Heating temperature */
	simulator->heater_time = 3;	/* 3 seconds to heat-up	*/
	simulator->heater_size = 0.01;	/* 0.01 square meter heater plate */
	simulator->heater_state = simulator->cooler_state = 0;
	simulator->frigo_isolation = 0.002;
	simulator->s_yeast_heat = 0.0;
	simulator->s_yeast_started = simulator->s_cool_changed = simulator->s_heat_changed = (int)0;

	if (Config.simulators == NULL) {
	    Config.simulators = simulator;
	} else {
	    for (tmps = Config.simulators; tmps; tmps = tmps->next) {
		if (tmps->next == NULL) {
		    tmps->next = simulator;
		    break;
		}
	    }
	}

	syslog(LOG_NOTICE, "Simulator %s added", simulator->uuid);
	srv_send((char *)"211 Simulator %s added", simulator->uuid);
	return 0;
    }

    if (strcmp(opt, (char *)"DEL") == 0) {
	rc = delete_Simulator(param);
	if (rc) {
	    syslog(LOG_NOTICE, "Simulator %s deleted", param);
	    srv_send((char *)"211 Simulator %s deleted", param);
	    return 0;
	} else {
	    srv_send((char *)"440 No such simulator");
	    return 1;
	}
    }

    if (strcmp(opt, (char *)"GET") == 0) {
	for (simulator = Config.simulators; simulator; simulator = simulator->next) {
	    if (strcmp(simulator->uuid, param) == 0) {
		srv_send((char *)"213 Simulator record follows:");
		srv_send((char *)"NAME,%s", simulator->name);
		srv_send((char *)"VOLUME_AIR,%d", simulator->volume_air);
		srv_send((char *)"VOLUME_BEER,%d", simulator->volume_beer);
		srv_send((char *)"ROOM_TEMPERATURE,%.1f", simulator->room_temperature);
		srv_send((char *)"AIR_TEMPERATURE,%.3f", simulator->air_temperature);
		srv_send((char *)"BEER_TEMPERATURE,%.3f", simulator->beer_temperature);
		srv_send((char *)"COOLER_TEMP,%.1f", simulator->cooler_temp);
		srv_send((char *)"COOLER_TIME,%d", simulator->cooler_time);
		srv_send((char *)"COOLER_SIZE,%.3f", simulator->cooler_size);
		srv_send((char *)"HEATER_TEMP,%.1f", simulator->heater_temp);
		srv_send((char *)"HEATER_TIME,%d", simulator->heater_time);
		srv_send((char *)"HEATER_SIZE,%.3f", simulator->heater_size);
		srv_send((char *)"HEATER_STATE,%d", simulator->heater_state);
		srv_send((char *)"COOLER_STATE,%d", simulator->cooler_state);
		srv_send((char *)"FRIGO_ISOLATION,%.3f", simulator->frigo_isolation);
		srv_send((char *)".");
		return 1;
	    }
	}
	srv_send((char *)"440 No such simulator");
	return 1;
    }

    if (strcmp(opt, (char *)"PUT") == 0) {
	for (simulator = Config.simulators; simulator; simulator = simulator->next) {
	    if (strcmp(simulator->uuid, param) == 0) {
		while (1) {
		    memset((char *)&ibuf, 0, SS_BUFSIZE);
		    fromlen = sizeof(peeraddr_in);
		    rlen = recvfrom(s, ibuf, sizeof(ibuf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
		    if (rlen == -1) {
			syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
			srv_send((char *)"518 recfrom(): %s", strerror(errno));
			return 1;
		    }
		    for (i = 0; i < strlen(ibuf); i++) {
			if (ibuf[i] == '\n')
			    ibuf[i] = '\0';
			if (ibuf[i] == '\r')
			    ibuf[i] = '\0';
		    }
		    for (i = strlen(ibuf) -1; i > 0; i--) {
			if (ibuf[i] == ' ')
			    ibuf[i] = '\0';
			else
			    break;
		    }
		    if (strlen(ibuf)) {
			if (debug) {
			    syslog(LOG_NOTICE, "recv: \"%s\"", ibuf);
			    fprintf(stdout, "recv: \"%s\"\n", ibuf);
			}
			if (strcmp(ibuf, (char *)".") == 0) {
			    srv_send((char *)"219 Accepted Simulator record");
			    return 0;
			}
			kwd = strtok(ibuf, ",\0");
			val = strtok(NULL, "\0");
			if (kwd && val) {

			    if (strcmp(kwd, (char *)"NAME") == 0) {
				if (simulator->name) {
				    if (strcmp(simulator->name, val))
					syslog(LOG_NOTICE, "Simulator %s name `%s' to `%s'", simulator->uuid, simulator->name, val);
				    free(simulator->name);
				}
				simulator->name = xstrcpy(val);

			    } else if (strcmp(kwd, (char *)"VOLUME_AIR") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (simulator->volume_air != ival)
					syslog(LOG_NOTICE, "Simulator %s volume air %d to %d", simulator->uuid, simulator->volume_air, ival);
				    simulator->volume_air = ival;
				}

			    } else if (strcmp(kwd, (char *)"VOLUME_BEER") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (simulator->volume_beer != ival)
					syslog(LOG_NOTICE, "Simulator %s volume beer %d to %d", simulator->uuid, simulator->volume_beer, ival);
				    simulator->volume_beer = ival;
				}

			    } else if (strcmp(kwd, (char *)"ROOM_TEMPERATURE") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->room_temperature != fval)
					syslog(LOG_NOTICE, "Simulator %s room temperature %.1f to %.1f", simulator->uuid, simulator->room_temperature, fval);
				    simulator->room_temperature = fval;
				}

			    } else if (strcmp(kwd, (char *)"AIR_TEMPERATURE") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->air_temperature != fval)
					syslog(LOG_NOTICE, "Simulator %s air temperature %.1f to %.1f", simulator->uuid, simulator->air_temperature, fval);
				    simulator->air_temperature = fval;
				}

			    } else if (strcmp(kwd, (char *)"BEER_TEMPERATURE") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->beer_temperature != fval)
					syslog(LOG_NOTICE, "Simulator %s beer temperature %.1f to %.1f", simulator->uuid, simulator->beer_temperature, fval);
				    simulator->beer_temperature = fval;
				}

			    } else if (strcmp(kwd, (char *)"COOLER_TEMP") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->cooler_temp != fval)
					syslog(LOG_NOTICE, "Simulator %s cooler temperature %.1f to %.1f", simulator->uuid, simulator->cooler_temp, fval);
				    simulator->cooler_temp = fval;
				}

			    } else if (strcmp(kwd, (char *)"COOLER_TIME") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (simulator->cooler_time != ival)
					syslog(LOG_NOTICE, "Simulator %s cooler time %d to %d", simulator->uuid, simulator->cooler_time, ival);
				    simulator->cooler_time = ival;
				}
	
			    } else if (strcmp(kwd, (char *)"COOLER_SIZE") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->cooler_size != fval)
					syslog(LOG_NOTICE, "Simulator %s cooler size %.1f to %.1f", simulator->uuid, simulator->cooler_size, fval);
				    simulator->cooler_size = fval;
				}

			    } else if (strcmp(kwd, (char *)"HEATER_TEMP") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->heater_temp != fval)
					syslog(LOG_NOTICE, "Simulator %s heater temperature %.1f to %.1f", simulator->uuid, simulator->heater_temp, fval);
				    simulator->heater_temp = fval;
				}

			    } else if (strcmp(kwd, (char *)"HEATER_TIME") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (simulator->heater_time != ival)
					syslog(LOG_NOTICE, "Simulator %s heater time %d to %d", simulator->uuid, simulator->heater_time, ival);
				    simulator->heater_time = ival;
				}

			    } else if (strcmp(kwd, (char *)"HEATER_SIZE") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->heater_size != fval)
					syslog(LOG_NOTICE, "Simulator %s heater size %.1f to %.1f", simulator->uuid, simulator->heater_size, fval);
				    simulator->heater_size = fval;
				}

			    } else if (strcmp(kwd, (char *)"HEATER_STATE") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (simulator->heater_state != ival)
					syslog(LOG_NOTICE, "Simulator %s heater state %d to %d", simulator->uuid, simulator->heater_state, ival);
				    simulator->heater_state = ival;
				}

			    } else if (strcmp(kwd, (char *)"COOLER_STATE") == 0) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (simulator->cooler_state != ival)
					syslog(LOG_NOTICE, "Simulator %s cooler state %d to %d", simulator->uuid, simulator->cooler_state, ival);
				    simulator->cooler_state = ival;
				}

			    } else if (strcmp(kwd, (char *)"FRIGO_ISOLATION") == 0) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (simulator->frigo_isolation != fval)
					syslog(LOG_NOTICE, "Simulator %s frigo isolation %.1f to %.1f", simulator->uuid, simulator->frigo_isolation, fval);
				    simulator->frigo_isolation = fval;
				}

			    }
			}
		    }
		}
	    }
	}
	srv_send((char *)"440 No such simulator");
	return 1;
    }

    srv_send((char *)"504 Subcommand error");
    return 1;
}
#endif


int delete_Unit(char *uuid)
{
    units_list  *current = Config.units;
    units_list	*previous = NULL;

    while (current) {
	if (strcmp(current->uuid, uuid) == 0) {
	    if (previous == NULL) {
		Config.units = current->next;
		free(current->uuid);
		current->uuid = NULL;
		free(current->name);
		current->name = NULL;
		if (current->air_address)
		    free(current->air_address);
		current->air_address = NULL;
		if (current->beer_address)
		    free(current->beer_address);
		current->beer_address = NULL;
		if (current->heater_address)
		    free(current->heater_address);
		current->heater_address = NULL;
		if (current->cooler_address)
		    free(current->cooler_address);
		current->cooler_address = NULL;
		if (current->fan_address)
		    free(current->fan_address);
		current->fan_address = NULL;
		if (current->door_address)
		    free(current->door_address);
		current->door_address = NULL;
		if (current->profile)
		    free(current->profile);
		current->profile = NULL;
		free(current);
		return 1;
	    } else {
		free(current->uuid);
		current->uuid = NULL;
		free(current->name);
		current->name = NULL;
		if (current->air_address)
		    free(current->air_address);
		current->air_address = NULL;
		if (current->beer_address)
		    free(current->beer_address);
		current->beer_address = NULL;
		if (current->heater_address)
		    free(current->heater_address);
		current->heater_address = NULL;
		if (current->cooler_address)
		    free(current->cooler_address);
		current->cooler_address = NULL;
		if (current->fan_address)
		    free(current->fan_address);
		current->fan_address = NULL;
		if (current->door_address)
		    free(current->door_address);
		current->door_address = NULL;
		if (current->profile)
		    free(current->profile);
		current->profile = NULL;
		previous->next = current->next;
		free(current);
		current = previous->next;
		return 1;
	    }
	} else {
	    previous = current;
	    current = current->next;
	}
    }
    return 0;
}


/*
 * UNIT ADD name
 * UNIT DEL uuid
 * UNIT LIST
 * UNIT GET uuid
 * UNIT PUT uuid
 */
int cmd_unit(char *buf)
{
    char                *opt, *param = NULL, *kwd, *val, ibuf[SS_BUFSIZE];
    units_list          *unit, *tmpu;
    uuid_t		uu;
    socklen_t		fromlen;
    int			ival, i, rc, rlen;
    float		fval;

    opt = strtok(buf, " \0");
    opt = strtok(NULL, " \0");

    if (opt == NULL) {
	srv_send((char *)"501 Subcommand missing");
	return 1;
    }
    param = strtok(NULL, "\0");

    if ((strcmp(opt, (char *)"LIST") == 0) && (param == NULL)) {
	srv_send((char *)"212 Fermenter list follows:");
	for (unit = Config.units; unit; unit = unit->next) {
	    srv_send((char *)"%s,%s,%s", unit->uuid, unit->name, UNITMODE[unit->mode]);
	}
	srv_send((char *)".");
	return 1;
    }

    if (param == NULL) {
	srv_send((char *)"502 Parameter missing");
	return 1;
    }

    if (strcmp(opt, (char *)"ADD") == 0) {
	unit = (units_list *)malloc(sizeof(units_list));
	unit->next = NULL;
	unit->version = 1;
	unit->uuid = malloc(37);
	uuid_generate(uu);
	uuid_unparse(uu, unit->uuid);
	unit->name = xstrcpy(param);
	unit->air_address = unit->beer_address = unit->heater_address = unit->cooler_address = \
			    unit->fan_address = unit->door_address = unit->profile = NULL;
	unit->volume = unit->prof_peak_abs = unit->prof_peak_rel = 0.0;
	unit->air_state = unit->beer_state = 1;
	unit->air_temperature = unit->beer_temperature = 20000;
	unit->beer_set = unit->fridge_set = 20.0;
	unit->heater_state = unit->cooler_state = unit->fan_state = unit->door_state = unit->mode = unit->prof_state = 0;
	unit->heater_delay = unit->cooler_delay = unit->fan_delay = 20;     /* 5 minutes delay */
	unit->heater_wait = unit->cooler_wait = unit->fan_wait = 0;
	unit->heater_usage = unit->cooler_usage = unit->fan_usage = 0;
	unit->temp_set_min = 1.0;
	unit->temp_set_max = 30.0;
	unit->idle_rangeH = 1.0;
	unit->idle_rangeL = -1.0;
	unit->prof_started = unit->prof_paused = unit->prof_primary_done = (time_t)0;
	unit->prof_percent = 0;
	unit->PID_err_old = unit->PID_I_err = 0.0;

	/*
	 * Block main process
	 */
	run_pause = TRUE;
	for (;;) {
	    usleep(100000);
	    if (run_hold)
		break;
	}

	if (Config.units == NULL) {
	    Config.units = unit;
	} else {
	    for (tmpu = Config.units; tmpu; tmpu = tmpu->next) {
		if (tmpu->next == NULL) {
		    tmpu->next = unit;
		    break;
		}
	    }
	}
#ifdef HAVE_WIRINGPI_H
	lcd_buf_reset();
#endif
	run_pause = FALSE;

	syslog(LOG_NOTICE, "Unit %s added", unit->uuid);
	srv_send((char *)"211 Unit %s added", unit->uuid);
	return 0;
    }

    if (strcmp(opt, (char *)"DEL") == 0) {
	/*
	 * Block main process.
	 */
	run_pause = TRUE;
	for (;;) {
	    usleep(100000);
	    if (run_hold)
		break;
	}

	rc = delete_Unit(param);
#ifdef HAVE_WIRINGPI_H
	lcd_buf_reset();
#endif
	run_pause = FALSE;

	if (rc) {
	    syslog(LOG_NOTICE, "Unit %s deleted", param);
	    srv_send((char *)"211 Unit %s deleted", param);
	    return 0;
	} else {
	    srv_send((char *)"440 No such unit");
	    return 1;
	}
    }

    if (strcmp(opt, (char *)"GET") == 0) {
	for (unit = Config.units; unit; unit = unit->next) {
	    if (strcmp(param, unit->uuid) == 0) {
		srv_send((char *)"213 Unit listing follows:");
		srv_send((char *)"NAME,%s", unit->name);
		srv_send((char *)"UUID,%s", unit->uuid);
		srv_send((char *)"VOLUME,%2f", unit->volume);
		srv_send((char *)"AIR_ADDRESS,%s", unit->air_address);
		srv_send((char *)"AIR_STATE,%s", TEMPSTATE[unit->air_state]);
		srv_send((char *)"AIR_TEMPERATURE,%.3f", unit->air_temperature / 1000.0);
		srv_send((char *)"BEER_ADDRESS,%s", MBSE_SS(unit->beer_address));
		srv_send((char *)"BEER_STATE,%s", TEMPSTATE[unit->beer_state]);
		srv_send((char *)"BEER_TEMPERATURE,%.3f", unit->beer_temperature / 1000.0);
		srv_send((char *)"HEATER_ADDRESS,%s", unit->heater_address);
		srv_send((char *)"HEATER_STATE,%d", unit->heater_state);
		srv_send((char *)"HEATER_DELAY,%d", unit->heater_delay);
		srv_send((char *)"HEATER_USAGE,%d", unit->heater_usage);
		srv_send((char *)"COOLER_ADDRESS,%s", unit->cooler_address);
		srv_send((char *)"COOLER_STATE,%d", unit->cooler_state);
		srv_send((char *)"COOLER_DELAY,%d", unit->cooler_delay);
		srv_send((char *)"COOLER_USAGE,%d", unit->cooler_usage);
		srv_send((char *)"FAN_ADDRESS,%s", unit->fan_address);
		srv_send((char *)"FAN_STATE,%d", unit->fan_state);
		srv_send((char *)"FAN_DELAY,%d", unit->fan_delay);
		srv_send((char *)"FAN_USAGE,%d", unit->fan_usage);
		srv_send((char *)"DOOR_ADDRESS,%s", unit->door_address);
		srv_send((char *)"DOOR_STATE,%d", unit->door_state);
		srv_send((char *)"MODE,%s", UNITMODE[unit->mode]);
		srv_send((char *)"FRIDGE_SET,%.1f", unit->fridge_set);
		srv_send((char *)"BEER_SET,%.1f", unit->beer_set);
		srv_send((char *)"PROFILE,%s", unit->profile);
		srv_send((char *)"PROF_STARTED,%d", (int)unit->prof_started);
		if (unit->prof_state == PROFILE_RUN) {
		    srv_send((char *)"PROF_STATE,%s %d%%", PROFSTATE[unit->prof_state], unit->prof_percent);
		} else {
		    srv_send((char *)"PROF_STATE,%s", PROFSTATE[unit->prof_state]);
		}
		srv_send((char *)"PROF_TARGET,%.3f", unit->prof_target);
		srv_send((char *)"PROF_PEAK_ABS,%.3f", unit->prof_peak_abs);
		srv_send((char *)"PROF_PEAK_REL,%.3f", unit->prof_peak_rel);
		srv_send((char *)"PROF_PRIMARY_DONE,%d", (int)unit->prof_primary_done);
		srv_send((char *)"TEMP_SET_MIN,%.1f", unit->temp_set_min);
		srv_send((char *)"TEMP_SET_MAX,%.1f", unit->temp_set_max);
		srv_send((char *)"IDLE_RANGE_L,%.1f", unit->idle_rangeL);
		srv_send((char *)"IDLE_RANGE_H,%.1f", unit->idle_rangeH);
		srv_send((char *)".");
		return 1;
	    }
	}
	srv_send((char *)"440 No such unit");
	return 1;
    }

    if (strcmp(opt, (char *)"PUT") == 0) {
	for (unit = Config.units ; unit; unit = unit->next) {
	     if (strcmp(unit->uuid, param) == 0) {
		while (1) {
		    memset((char *)&ibuf, 0, SS_BUFSIZE);
		    fromlen = sizeof(peeraddr_in);
		    rlen = recvfrom(s, ibuf, sizeof(ibuf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
		    if (rlen == -1) {
			syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
			srv_send((char *)"518 recfrom(): %s", strerror(errno));
			return 1;
		    }
		    for (i = 0; i < strlen(ibuf); i++) {
			if (ibuf[i] == '\n')
			    ibuf[i] = '\0';
			if (ibuf[i] == '\r')
			    ibuf[i] = '\0';
		    }
		    for (i = strlen(ibuf) -1; i > 0; i--) {
			if (ibuf[i] == ' ')
			    ibuf[i] = '\0';
			else
			    break;
		    }
		    if (strlen(ibuf)) {
			if (debug) {
			    syslog(LOG_NOTICE, "recv: \"%s\"", ibuf);
			    fprintf(stdout, "recv: \"%s\"\n", ibuf);
			}
			if (strcmp(ibuf, (char *)".") == 0) {
			    srv_send((char *)"219 Accepted Unit record");
			    return 0;
			}
			kwd = strtok(ibuf, ",\0");
			val = strtok(NULL, "\0");
			if (kwd) {
			    /*
			     * Accept writable data. The client can sent just one line,
			     * but may also sent everything. Simply ignore things we
			     * don't understand.
			     */
			    if (val && (strcmp(kwd, (char *)"NAME") == 0)) {
				if (unit->name) {
				    if (strcmp(unit->name, val))
					syslog(LOG_NOTICE, "Fermenter unit %s name `%s' to `%s'", unit->uuid, unit->name, val);
				    free(unit->name);
				}
				unit->name = xstrcpy(val);

			    } else if (val && (strcmp(kwd, (char *)"VOLUME") == 0)) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (unit->volume != fval)
					syslog(LOG_NOTICE, "Fermenter unit %s volume %.3f to %.3f", unit->uuid, unit->volume, fval);
				    unit->volume = fval;
				}

			    } else if (strcmp(kwd, (char *)"AIR_ADDRESS") == 0) {
				if (val && unit->air_address && (strcmp(val, unit->air_address)))
				    syslog(LOG_NOTICE, "Fermenter unit %s air address `%s' to `%s'", unit->uuid, unit->air_address, val);
				if (unit->air_address) {
				    device_count(FALSE, unit->air_address);
				    free(unit->air_address);
				}
				if (val) {
				    unit->air_address  = xstrcpy(val);
				    device_count(TRUE, unit->air_address);
				} else
				    unit->air_address  = NULL;

			    } else if (strcmp(kwd, (char *)"BEER_ADDRESS") == 0) {
				if (val && unit->beer_address && (strcmp(val, unit->beer_address)))
				    syslog(LOG_NOTICE, "Fermenter unit %s beer address `%s' to `%s'", unit->uuid, unit->beer_address, val);
				if (unit->beer_address) {
				    device_count(FALSE, unit->beer_address);
				    free(unit->beer_address);
				}
				if (val) {
				    unit->beer_address = xstrcpy(val);
				    device_count(TRUE, unit->beer_address);
				} else
				    unit->beer_address = NULL;

			    } else if (strcmp(kwd, (char *)"HEATER_ADDRESS") == 0) {
				if (val && unit->heater_address && (strcmp(val, unit->heater_address)))
				    syslog(LOG_NOTICE, "Fermenter unit %s heater address `%s' to `%s'", unit->uuid, unit->heater_address, val);
				if (unit->heater_address) {
				    device_count(FALSE, unit->heater_address);
				    free(unit->heater_address);
				}
				if (val) {
				    unit->heater_address = xstrcpy(val);
				    device_count(TRUE, unit->heater_address);
				} else
				    unit->heater_address = NULL;

			    } else if (val && (strcmp(kwd, (char *)"HEATER_STATE") == 0)) {
				if ((sscanf(val, "%d", &ival) == 1) && ((ival == 0) || (ival == 100))) {
				    if (unit->heater_state != ival)
					syslog(LOG_NOTICE, "Fermenter unit %s heater state %d to %d", unit->uuid, unit->heater_state, ival);
				    unit->heater_state = ival;
				}

			    } else if (val && (strcmp(kwd, (char *)"HEATER_DELAY") == 0)) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (unit->heater_delay != ival)
					syslog(LOG_NOTICE, "Fermenter unit %s heater delay %d to %d", unit->uuid, unit->heater_delay, ival);
				    unit->heater_delay = ival;
				}

			    } else if (strcmp(kwd, (char *)"COOLER_ADDRESS") == 0) {
				if (val && unit->cooler_address && (strcmp(val, unit->cooler_address)))
				    syslog(LOG_NOTICE, "Fermenter unit %s cooler address `%s' to `%s'", unit->uuid, unit->cooler_address, val);
				if (unit->cooler_address) {
				    device_count(FALSE, unit->cooler_address);
				    free(unit->cooler_address);
				}
				if (val) {
				    unit->cooler_address = xstrcpy(val);
				    device_count(TRUE, unit->cooler_address);
				} else
				    unit->cooler_address = NULL;

			    } else if (val && (strcmp(kwd, (char *)"COOLER_STATE") == 0)) {
				if ((sscanf(val, "%d", &ival) == 1) && ((ival == 0) || (ival == 100))) {
				    if (unit->cooler_state != ival)
					syslog(LOG_NOTICE, "Fermenter unit %s cooler state %d to %d", unit->uuid, unit->cooler_state, ival);
				    unit->cooler_state = ival;
				}

			    } else if (val && (strcmp(kwd, (char *)"COOLER_DELAY") == 0)) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (unit->cooler_delay != ival)
					syslog(LOG_NOTICE, "Fermenter unit %s cooler delay %d to %d", unit->uuid, unit->cooler_delay, ival);
				    unit->cooler_delay = ival;
				}

			    } else if (strcmp(kwd, (char *)"FAN_ADDRESS") == 0) {
				if (val && unit->fan_address && (strcmp(val, unit->fan_address)))
				    syslog(LOG_NOTICE, "Fermenter unit %s fan address `%s' to `%s'", unit->uuid, unit->fan_address, val);
				if (unit->fan_address) {
				    device_count(FALSE, unit->fan_address);
				    free(unit->fan_address);
				}
				if (val) {
				    unit->fan_address = xstrcpy(val);
				    device_count(TRUE, unit->fan_address);
				} else
				    unit->fan_address = NULL;
			   
			    } else if (val && (strcmp(kwd, (char *)"FAN_STATE") == 0)) {
				if ((sscanf(val, "%d", &ival) == 1) && ((ival == 0) || (ival == 100))) {
				    if (unit->fan_state != ival)
					syslog(LOG_NOTICE, "Fermenter unit %s fan state %d to %d", unit->uuid, unit->fan_state, ival);    
				    unit->fan_state = ival;
				}
			    
			    } else if (val && (strcmp(kwd, (char *)"FAN_DELAY") == 0)) {
				if (sscanf(val, "%d", &ival) == 1) {
				    if (unit->fan_delay != ival)
					syslog(LOG_NOTICE, "Fermenter unit %s fan delay %d to %d", unit->uuid, unit->fan_delay, ival);
				    unit->fan_delay = ival;
				}

			    } else if (strcmp(kwd, (char *)"DOOR_ADDRESS") == 0) {
				if (val && unit->door_address && (strcmp(val, unit->door_address)))
				    syslog(LOG_NOTICE, "Fermenter unit %s door address `%s' to `%s'", unit->uuid, unit->door_address, val);
				if (unit->door_address) {
				    device_count(FALSE, unit->door_address);
				    free(unit->door_address);
				}
				if (val) {
				    unit->door_address = xstrcpy(val);
				    device_count(TRUE, unit->door_address);
				} else
				    unit->door_address = NULL;

			    } else if (val && (strcmp(kwd, (char *)"MODE") == 0)) {
				for (i = 0; i < 5; i++) {
				    if (strcmp(val, UNITMODE[i]) == 0) {
					/* Initialize log if the unit is turned on */
					if ((unit->mode == UNITMODE_OFF) && (i != UNITMODE_OFF))
					    initlog(unit->name);
					syslog(LOG_NOTICE, "Fermenter unit %s mode %s to %s", unit->uuid, UNITMODE[unit->mode], UNITMODE[i]);
					unit->mode = i;
					/* Allways turn everything off after a mode change */
					unit->PID_I_err = unit->PID_err_old = 0.0;
					unit->heater_state = unit->cooler_state = unit->fan_state = 0;
					unit->heater_wait = unit->cooler_wait = unit->fan_wait = 0;
					device_out(unit->heater_address, unit->heater_state);
					device_out(unit->cooler_address, unit->cooler_state);
					device_out(unit->fan_address, unit->fan_state);
					if (unit->mode == UNITMODE_PROFILE) {
					    /*
					     * Set a sane default until it will be overruled by the
					     * main processing loop.
					     */
					    unit->prof_target = 20.0;
					}
					break;
				    }
				}

			    } else if (val && (strcmp(kwd, (char *)"FRIDGE_SET") == 0)) {
				if ((sscanf(val, "%f", &fval) == 1) && (fval >= unit->temp_set_min) && (fval <= unit->temp_set_max)) {
				    if (unit->fridge_set != fval)
				    	syslog(LOG_NOTICE, "Fermenter unit %s fridge temperature %.1f to %.1f", unit->uuid, unit->fridge_set, fval);
				    unit->fridge_set = fval;
				}

			    } else if (val && (strcmp(kwd, (char *)"BEER_SET") == 0)) {
				if ((sscanf(val, "%f", &fval) == 1) && (fval >= unit->temp_set_min) && (fval <= unit->temp_set_max)) {
				    if (unit->fridge_set != fval)
				    	syslog(LOG_NOTICE, "Fermenter unit %s beer temperature %.1f to %.1f", unit->uuid, unit->beer_set, fval);
				    unit->beer_set = fval;
				}

			    } else if (strcmp(kwd, (char *)"PROFILE") == 0) {
				if (unit->prof_state == PROFILE_OFF) {
				    /*
				     * Only change profile if it is not active, else drop this one.
				     */
				    if (unit->profile && val && strcmp(unit->profile, val))
					syslog(LOG_NOTICE, "Fermenter unit %s profile name `%s' to `%s'", unit->uuid, unit->profile, val);
				    if (unit->profile)
				    	free(unit->profile);

				    if (val)
				    	unit->profile = xstrcpy(val);
				    else
				    	unit->profile = NULL;
				    /*
				     * Reset all output devices
				     */
				    unit->PID_I_err = unit->PID_err_old = 0.0;
				    unit->heater_state = unit->cooler_state = unit->fan_state = 0;
				    unit->heater_wait = unit->cooler_wait = unit->fan_wait = 0;
				    device_out(unit->heater_address, unit->heater_state);
				    device_out(unit->cooler_address, unit->cooler_state);
				    device_out(unit->fan_address, unit->fan_state);
				}

			    } else if (val && (strcmp(kwd, (char *)"PROF_STATE") == 0)) {
				for (i = 0; i < 5; i++) {
				    if (strcmp(val, PROFSTATE[i]) == 0) {
					switch (i) {
						case PROFILE_OFF:	if (unit->prof_state == PROFILE_DONE) {
									    unit->prof_state = PROFILE_OFF;
									    syslog(LOG_NOTICE, "Fermenter unit %s profile to OFF", unit->uuid);
									}
									break;
						case PROFILE_PAUSE:	if (unit->prof_state == PROFILE_RUN) {
									    unit->prof_state = PROFILE_PAUSE;
									    syslog(LOG_NOTICE, "Fermenter unit %s profile PAUSE", unit->uuid);
									} else if (unit->prof_state == PROFILE_PAUSE) {
									    unit->prof_state = PROFILE_RUN;
									    syslog(LOG_NOTICE, "Fermenter unit %s profile RESUME", unit->uuid);
									}
									break;
						case PROFILE_RUN:	if (unit->prof_state == PROFILE_OFF) {
									    unit->prof_state = PROFILE_RUN;
									    unit->prof_started = time(NULL);
									    unit->prof_paused = unit->prof_primary_done = 0;
									    unit->prof_peak_abs = unit->prof_peak_rel = 0.0;
									    syslog(LOG_NOTICE, "Fermenter unit %s profile to RUN", unit->uuid);
									}
									break;
						case PROFILE_DONE:	break;	/* Command is illegal */
						case PROFILE_ABORT:	if ((unit->prof_state == PROFILE_RUN) || (unit->prof_state == PROFILE_PAUSE)) {
									    unit->prof_state = PROFILE_OFF;
									    unit->prof_started = 0;
									    syslog(LOG_NOTICE, "Fermenter unit %s profile ABORT", unit->uuid);
									}
									break;
					}
					break;
				    }
				}

			    } else if (val && (strcmp(kwd, (char *)"TEMP_SET_MIN") == 0)) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (unit->temp_set_min != fval)
					syslog(LOG_NOTICE, "Fermenter unit %s temperature set minimum %.1f to %.1f", unit->uuid, unit->temp_set_min, fval);
				    unit->temp_set_min = fval;
				}

			    } else if (val && (strcmp(kwd, (char *)"TEMP_SET_MAX") == 0)) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (unit->temp_set_max != fval)
					syslog(LOG_NOTICE, "Fermenter unit %s temperature set maximum %.1f to %.1f", unit->uuid, unit->temp_set_max, fval);
				    unit->temp_set_max = fval;
				}

			    } else if (val && (strcmp(kwd, (char *)"IDLE_RANGE_L") == 0)) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (unit->idle_rangeL != fval)
					syslog(LOG_NOTICE, "Fermenter unit %s idle range low %.1f to %.1f", unit->uuid, unit->idle_rangeL, fval);
				    unit->idle_rangeL = fval;
				}

			    } else if (val && (strcmp(kwd, (char *)"IDLE_RANGE_H") == 0)) {
				if (sscanf(val, "%f", &fval) == 1) {
				    if (unit->idle_rangeH != fval)
					syslog(LOG_NOTICE, "Fermenter unit %s idle range high %.1f to %.1f", unit->uuid, unit->idle_rangeH, fval);
				    unit->idle_rangeH = fval;
				}

			    }
			}
		    }
		}
	    }
	}
	srv_send((char *)"440 No such unit");
	return 1;
    }

    srv_send((char *)"504 Subcommand error");
    return 1;
}


void cmd_server(void)
{
    char                buf[SS_BUFSIZE];
    int                 i, rlen;
    socklen_t           fromlen;

    memset((char *)&buf, 0, SS_BUFSIZE);
    fromlen = sizeof(peeraddr_in);
    rlen = recvfrom(s, buf, sizeof(buf) -1, 0, (struct sockaddr *)&peeraddr_in, &fromlen);
    if (rlen == -1) {
	syslog(LOG_NOTICE, "recvfrom(): %s", strerror(errno));
    } else {		    
	for (i = 0; i < strlen(buf); i++) {
	    if (buf[i] == '\n')
		buf[i] = '\0';
	    if (buf[i] == '\r')
	    	buf[i] = '\0';
	}
	for (i = strlen(buf) -1; i > 0; i--) {
	    if (buf[i] == ' ')
		buf[i] = '\0';
	    else
		break;
	}
	if (strlen(buf)) {
	    if (debug) {
		syslog(LOG_NOTICE, "recv: \"%s\"", buf);
		fprintf(stdout, "recv: \"%s\"\n", buf);
	    }

	    /*
	     * Process commands from the client
	     */
	    if (strncmp(buf, "DEVICE", 6) == 0) {
		if (cmd_device(buf) == 0)
		    wrconfig();
	    } else if (strncmp(buf, "GLOBAL", 6) == 0) {
		if (cmd_global(buf) == 0)
		    wrconfig();
	    } else if (strncmp(buf, "HELP", 4) == 0) {
		srv_send((char *)"100 Help text follows");
		srv_send((char *)"Recognized commands:");
		srv_send((char *)"");
//                                12345678901234567890123456789012345678901234567890123456789012345678901234567890
		srv_send((char *)"DEVICE ADD type               Add new Device type");
		srv_send((char *)"DEVICE DEL uuid               Delete Device by uuid");
		srv_send((char *)"DEVICE LIST                   List Devices");
		srv_send((char *)"DEVICE GET uuid               Get Device record by uuid");
		srv_send((char *)"DEVICE PUT uuid               Put Device record by uuid");
		srv_send((char *)"GLOBAL GET                    Get global settings");
		srv_send((char *)"GLOBAL PUT                    Put global settings");
		srv_send((char *)"LIST                          List all fermenter units");
		srv_send((char *)"LIST LOG uuid                 List logfile data in 1 hour lines");
		srv_send((char *)"PROFILE uuid,name             Profile rename");
		srv_send((char *)"PROFILE ADD name              Add new Profile with name");
		srv_send((char *)"PROFILE DEL uuid              Delete Profile by uuid");
		srv_send((char *)"PROFILE LIST                  List available profiles");
		srv_send((char *)"PROFILE GET uuid              Get Profile record by uuid");
		srv_send((char *)"PROFILE PUT uuid              Put Profile record by uuid");
		srv_send((char *)"PROFILE GETS uuid             Profile get steps list");
		srv_send((char *)"PROFILE PUTS uuid             Profile put steps list");
#ifdef USE_SIMULATOR
		srv_send((char *)"SIMULATOR ADD name            Add a new Simulator with name");
		srv_send((char *)"SIMULATOR DEL uuid            Delete Simulator by uuid");
		srv_send((char *)"SIMULATOR LIST                List all Simulators");
		srv_send((char *)"SIMULATOR GET uuid            Get Simulator record by uuid");
		srv_send((char *)"SIMULATOR PUT uuid            Put Simulator record by uuid");
#endif
		srv_send((char *)"UNIT ADD name                 Add a new Unit with name");
		srv_send((char *)"UNIT DEL uuid                 Delete Unit by uuid");
		srv_send((char *)"UNIT LIST                     List all Units");
		srv_send((char *)"UNIT GET uuid                 Get Unit record by uuid");
		srv_send((char *)"UNIT PUT uuid                 Put Unit record by uuid");
		srv_send((char *)".");
	    } else if (strncmp(buf, "LIST", 4) == 0) {
		cmd_list(buf);
	    } else if (strncmp(buf, "PROFILE", 7) == 0) {
		if (cmd_profile(buf) == 0)
		    wrconfig();
#ifdef USE_SIMULATOR
	    } else if (strncmp(buf, "SIMULATOR", 9) == 0) {
		if (cmd_simulator(buf) == 0)
		    wrconfig();
#endif
	    } else if (strncmp(buf, "UNIT", 4) == 0) {
		if (cmd_unit(buf) == 0)
		    wrconfig();
	    } else {
		srv_send((char *)"500 Unknown command");
	    }
	}
    }

    close(s);
}


#ifdef HAVE_WIRINGPI_H
PI_THREAD (my_server_loop)
#else
void *my_server_loop(void *threadid)
#endif
{
    socklen_t   addrlen;
    int         optval = 1;

    syslog(LOG_NOTICE, "Thread my_server_loop started");
    if (debug)
	fprintf(stdout, "Thread my_server_loop started\n");

    memset((char *)&myaddr_in, 0, sizeof(struct sockaddr_in));
    memset((char *)&peeraddr_in, 0, sizeof(struct sockaddr_in));
    myaddr_in.sin_family = AF_INET;
    myaddr_in.sin_addr.s_addr = INADDR_ANY;
    myaddr_in.sin_port = htons(Config.my_port);

    ls = socket(AF_INET, SOCK_STREAM, 0);
    if (ls == -1) {
	syslog(LOG_NOTICE, "Can't create listen socket: %s", strerror(errno));
	fprintf(stderr, "Can't create listen socket: %s\n", strerror(errno));
	return 0;
    }

    if (setsockopt(ls, SOL_SOCKET, SO_KEEPALIVE, &optval, sizeof(optval)) == -1) {
	syslog(LOG_NOTICE, "Can't setsockopt SO_KEEPALIVE socket: %s", strerror(errno));
	close(ls);
	return 0;
    }

    if (setsockopt(ls, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)) == -1) {
	syslog(LOG_NOTICE, "Can't setsockopt SO_REUSEADDR socket: %s", strerror(errno));
	close(ls);
	return 0;
    }

    if (bind(ls, (struct sockaddr *)&myaddr_in, sizeof(struct sockaddr_in)) == -1) {
	syslog(LOG_NOTICE, "Can't bind to listen socket: %s", strerror(errno));
	close(ls);
	return 0;
    }

    if (listen(ls, 5) == -1) {
	syslog(LOG_NOTICE, "Can't listen on listen socket: %s", strerror(errno));
	close(ls);
	return 0;
    }

    syslog(LOG_NOTICE, "listen socket created %d", ls);


    /*
     * Loop forever until the external shutdown variable is set.
     */
    for (;;) {
	
	addrlen = sizeof(struct sockaddr_in);
        /*
	 * This call will block until a new connection
	 * arrives. Then it will return the address of
	 * the connecting peer, and a new socket
	 * descriptor, s, for that connection.
	 */
	s = accept(ls, (struct sockaddr *)&peeraddr_in, &addrlen);
	if (s == -1) {
	    syslog(LOG_NOTICE, "my_server_loop accept failed %s", strerror(errno));
	    if (debug)
		fprintf(stdout, "my_server_loop accept failed %s\n", strerror(errno));
	    return 0;
	}

	cmd_server();

	if (my_shutdown) {
	    syslog(LOG_NOTICE, "Thread my_server_loop stopped");
	    if (debug)
		fprintf(stdout, "Thread my_server_loop stopped\n");
	    return 0;
	}

    }
}