thermferm/devices.c

/*****************************************************************************
 * Copyright (C) 2014
 *   
 * Michiel Broek <mbroek at mbse dot eu>
 *
 * This file is part of the mbsePi-apps
 *
 * This is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * mbsePi-apps is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with thermferm; see the file COPYING.  If not, write to the Free
 * Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
 *****************************************************************************/

#include "thermferm.h"
#include "devices.h"
#include "rc-switch.h"
#include "panel.h"
#include "xutil.h"


extern int		debug;
extern sys_config	Config;
extern int		my_shutdown;


#ifdef HAVE_WIRINGPI_H

#define MAXTIMINGS 100

int             dht11_pin = -1;
int             dht11_temperature = -1;
int             dht11_humidity = -1;
int             dht11_valid = FALSE;
time_t		dht11_last = (time_t)0;


static uint8_t sizecvt(const int read_value) {
    /* 
     * digitalRead() and friends from wiringpi are defined as returning a value
     *            < 256. However, they are returned as int() types. This is a safety function 
     */
    if (read_value > 255 || read_value < 0) {
	syslog(LOG_NOTICE, "invalid data from wiringPi library");
    }
	                      
    return (uint8_t)read_value;
}


/*
 * DHT11 sensor read.
 */
void dht11Read(void) {
    int         	tries = 5;
    unsigned short	got_correct_data = 0;

    if (dht11_pin == -1)
	return;

    while (tries && !got_correct_data) {
	uint8_t	laststate = HIGH;
	uint8_t	counter = 0;
	uint8_t	j = 0, i = 0;
	int	dht11_dat[5] = {0,0,0,0,0};

	/*
	 * Select output mode to send the start signal.
	 */
	pinMode(dht11_pin, OUTPUT);                 
	digitalWrite(dht11_pin, HIGH);
	usleep(1000);

	/*
	 * Low for at least 18 milliseconds
	 */
	digitalWrite(dht11_pin, LOW);
	usleep(20000);
	digitalWrite(dht11_pin, HIGH);
	pinMode(dht11_pin, INPUT);

	/*
	 * Detect change and read data
	 */
	for (i=0; i<MAXTIMINGS; i++) {
	    counter = 0;
	    delayMicroseconds(10);
	    while (sizecvt(digitalRead(dht11_pin)) == laststate) {
		counter++;
		delayMicroseconds(1);
		if (counter == 255) {
		    break;
		}
	    }
	    laststate = sizecvt(digitalRead(dht11_pin));

	    if (counter == 255) 
		break;

	    /*
	     * ignore first 3 transitions
	     */
	    if ((i >= 4) && (i%2 == 0)) {

		// shove each bit into the storage bytes
		dht11_dat[(int)((double)j/8)] <<= 1;
		if (counter > 16)
		    dht11_dat[(int)((double)j/8)] |= 1;
		j++;
	    }
	}

	/*
	 * If there is no sensor, j = 0
	 */
	if ((counter == 255) && (j == 0)) {
	    if (dht11_temperature != -1) {
		syslog(LOG_WARNING, "dht11 sensor disappeared");
	    } else {
		syslog(LOG_WARNING, "dht11 sensor not present");
	    }
	    dht11_temperature = -1;
	    dht11_humidity = -1;
	    dht11_valid = FALSE;
	    return;
	} 

	/*
	 * check we read 40 bits (8bit x 5 ) + verify checksum in the last byte
	 * print it out if data is good
	 */
	if ((j >= 40) && (dht11_dat[4] == ((dht11_dat[0] + dht11_dat[1] + dht11_dat[2] + dht11_dat[3]) & 0xFF))) {
		got_correct_data = 1;

		int h = dht11_dat[0] + dht11_dat[1];
		int t = (dht11_dat[2] & 0x7F) + dht11_dat[3];

		if ((dht11_dat[2] & 0x80) != 0) 
		    t *= -1;

		dht11_temperature = t;
		dht11_humidity = h;
		dht11_valid = TRUE;
	} else {
		tries--;
		if (tries == 0)
		    syslog(LOG_WARNING, "dht11 data checksum was wrong 5 times");
		usleep(100000);
	}
    }
}

#endif


int device_out(char *uuid, int value)
{
    devices_list	*device;
    time_t		now;
#ifdef HAVE_WIRINGPI_H
    int			i, rc;
    char		buf[40];
#endif

    if (uuid == NULL)
	return 0;

    now = time(NULL);

    for (device = Config.devices; device; device = device->next) {
	if (! strcmp(uuid, device->uuid)) {
	    /*
	     * Execute command if different then the old value. But also
	     * every 2 minutes because commands can have temporary
	     * disconnects, or have radio problems.
	     */
	    if ((value != device->value) || (((int)now - (int)device->timestamp) > 120)) {

#ifdef HAVE_WIRINGPI_H
		rc = 0;
		if ((device->type == DEVTYPE_RC433) && (device->gpiopin != -1) && (device->present == DEVPRESENT_YES)) {
		    snprintf(buf, 39, "%s,%d", device->address, value ? 1:0);
		    for (i = 0; i < strlen(buf); i++)
			if (buf[i] == '-')
			    buf[i] = ',';
	    	    enableTransmit(device->gpiopin);	    
		    rc = toggleSwitch(buf);
		    disableTransmit();
		    syslog(LOG_NOTICE, "RC433 command %s rc=%d", buf, rc);
		    if (debug)
			fprintf(stdout, "RC433 command %s rc=%d\n", buf, rc);
		    piLock(LOCK_DEVICES);
                    device->value = value;
		    device->timestamp = time(NULL);
		    piUnlock(LOCK_DEVICES);
		    return rc;
	        }

		if ((device->type == DEVTYPE_GPIO) && (device->gpiopin != -1) && (device->present == DEVPRESENT_YES)) {

		}
#endif
		if ((device->type == DEVTYPE_W1) && (device->direction == DEVDIR_OUT_BIN) && (device->present == DEVPRESENT_YES)) {

		}
	    } else {
		return 0;
	    }
	}
    }

    return 0;
}	   


/*
 * Auto detect hotplugged or known to be present devices
 */
int devices_detect(void)
{
    struct dirent	*de;
    DIR			*fd;
    devices_list	*device, *ndev;
    int			found, subdevices, i, rc = 0;
    char		buf[40];
    uuid_t		uu;
#ifdef HAVE_WIRINGPI_H
    int			pin;
#endif

    /*
     * Scan for 1-wire devices
     */
    if ((fd = opendir((char *)"/sys/bus/w1/devices"))) {
	while ((de = readdir(fd))) {
	    if (de->d_name[0] != '.') {
		found = FALSE;
		for (device = Config.devices; device; device = device->next) {
		    if (strcmp(device->address,de->d_name) == 0) {
			found = TRUE;
			break;
		    }
		}

		if (found == FALSE) {
		    strncpy(buf, de->d_name, 2);
		    buf[2] = '\0';
		    subdevices = 1;
		    if (strcmp(buf, (char *)"29") == 0)
			subdevices = 8;
		    if (strcmp(buf, (char *)"3a") == 0)
			subdevices = 2;
		    for (i = 0; i < subdevices; i++) {
			ndev = (devices_list *)malloc(sizeof(devices_list));
			ndev->next = NULL;
			ndev->version = 1;
			ndev->uuid = malloc(37);
			uuid_generate(uu);
			uuid_unparse(uu, ndev->uuid);
			ndev->type = DEVTYPE_W1;
			ndev->direction = DEVDIR_UNDEF;
			if (strcmp(buf, (char *)"10") == 0) {
			    ndev->direction = DEVDIR_IN_ANALOG;
			    ndev->description = xstrcpy((char *)"DS18S20 Digital thermometer");
			} else if (strcmp(buf, (char *)"28") == 0) {
			    ndev->direction = DEVDIR_IN_ANALOG;
			    ndev->description = xstrcpy((char *)"DS18B20 Digital thermometer");
			} else if (strcmp(buf, (char *)"29") == 0) {
			    ndev->description = xstrcpy((char *)"DS2408 8 Channel addressable switch/LCD");
			} else if (strcmp(buf, (char *)"3a") == 0) {
			    ndev->description = xstrcpy((char *)"DS2413 Dual channel addressable switch");
			} else if (strcmp(buf, (char *)"w1") == 0) {
			    ndev->description = xstrcpy((char *)"Master System device");
			} else {
			    ndev->description = xstrcpy((char *)"Unknown device family ");
			    ndev->description = xstrcat(ndev->description, buf);
			}
			ndev->value = ndev->inuse = 0;
			ndev->present = DEVPRESENT_YES;
			ndev->address = xstrcpy(de->d_name);
			ndev->subdevice = i;
			ndev->gpiopin = -1;
			ndev->comment = xstrcpy((char *)"Auto detected device");
			ndev->timestamp = time(NULL);

			if (Config.devices == NULL) {
			    Config.devices = ndev;
			} else {
			    for (device = Config.devices; device; device = device->next) {
				if (device->next == NULL) {
				    device->next = ndev;
				    break;
				}
			    }
			}
			rc++;
		    }
		}
	    }
	}
	closedir(fd);
    }

#ifdef HAVE_WIRINGPI_H
    if (piBoardRev() == 2) {
	/*
	 * Support rev B boards only
	 */
	found = FALSE;
	for (device = Config.devices; device; device = device->next) {
	    if (device->type == DEVTYPE_GPIO) {
		found = TRUE;
		break;
	    }
	}

    	if (found == FALSE) {
	    /*
	     * There were no GPIO devices found.
	     */
	    subdevices = 12;
	    pin = 0;
	    for (i = 0; i < subdevices; i++) {
	    	if (i == 8)
		    pin = 17;

	    	ndev = (devices_list *)malloc(sizeof(devices_list));
	    	ndev->next = NULL;
	    	ndev->version = 1;
	    	ndev->uuid = malloc(37);
	    	uuid_generate(uu);
	    	uuid_unparse(uu, ndev->uuid);
	    	ndev->type = DEVTYPE_GPIO;
	    	ndev->value = digitalRead(pin);
	    	ndev->present = DEVPRESENT_YES;
	    	ndev->address = xstrcpy((char *)"GPIO");
	    	snprintf(buf, 39, "Raspberry GPIO %d", i);
	    	ndev->description = xstrcpy(buf);
	    	ndev->subdevice = i;
	    	ndev->gpiopin = pin;
	    	ndev->timestamp = time(NULL);
		if (i == PANEL_LED) {
		    ndev->direction = DEVDIR_OUT_BIN;
		    ndev->inuse = 1;
		    ndev->comment = xstrcpy((char *)"Frontpanel LED");
		} else if (i == PANEL_ENTER) {
		    ndev->direction = DEVDIR_IN_BIN;
		    ndev->inuse = 1;
		    ndev->comment = xstrcpy((char *)"Frontpanel Enter key");
		} else if (i == PANEL_DOWN) {
		    ndev->direction = DEVDIR_IN_BIN;
		    ndev->inuse = 1;
		    ndev->comment = xstrcpy((char *)"Frontpanel Down key");
		} else if (i == PANEL_UP) {
		    ndev->direction = DEVDIR_IN_BIN;
		    ndev->inuse = 1;
		    ndev->comment = xstrcpy((char *)"Frontpanel Up key");
		} else if (i == 7) {
		    ndev->direction = DEVDIR_INTERN;
		    ndev->inuse = 1;
		    ndev->comment = xstrcpy((char *)"1-Wire bus");
	    	} else {
		    ndev->direction = DEVDIR_IN_BIN;
		    ndev->inuse = 0;
		    ndev->comment = xstrcpy((char *)"Raspberry GPIO");
	    	}
	    	pin++;

	    	if (Config.devices == NULL) {
		    Config.devices = ndev;
	    	} else {
		    for (device = Config.devices; device; device = device->next) {
		        if (device->next == NULL) {
			    device->next = ndev;
			    break;
		    	}
		    }
	    	}
	    	rc++;
	    }
	}
    }
#endif

    return rc;
}


#ifdef HAVE_WIRINGPI_H
PI_THREAD (my_devices_loop)
#else
void *my_devices_loop(void *threadid)
#endif
{
    devices_list	*device;
    char		*addr = NULL, line[60], *p = NULL;
    FILE		*fp;
    int			temp, rc;
    time_t		now;

    syslog(LOG_NOTICE, "Thread my_devices_loop started");

    rc = piHiPri(10);
    syslog(LOG_NOTICE, "Thread my_devices_loop piHiPri(10) rc=%d", rc);

    /*
     * Loop forever until the external shutdown variable is set.
     */
    for (;;) {

    	/*
    	 * Process all devices.
    	 */
    	for (device = Config.devices; device; device = device->next) {

	    if (my_shutdown)
		break;

	    switch (device->type) {
		case DEVTYPE_W1:
			if (strncmp(device->address, (char *)"28", 2) == 0) {
			    /* Read DS18B20 sensor */
			    addr = xstrcpy((char *)"/sys/bus/w1/devices/");
			    addr = xstrcat(addr, device->address);
			    addr = xstrcat(addr, (char *)"/w1_slave");
			    if ((fp = fopen(addr, "r"))) {
				if (device->present != DEVPRESENT_YES) {
				     syslog(LOG_WARNING, "sensor %s is back", device->address);
#ifdef HAVE_WIRINGPI_H
				     piLock(LOCK_DEVICES);
#endif
				     device->present = DEVPRESENT_YES;
#ifdef HAVE_WIRINGPI_H
				     piUnlock(LOCK_DEVICES);
#endif
				}
				/*
				 * The output looks like:
				 * 72 01 4b 46 7f ff 0e 10 57 : crc=57 YES
				 * 72 01 4b 46 7f ff 0e 10 57 t=23125
				 */
				fgets(line, 50, fp);
				line[strlen(line)-1] = '\0';
				if ((line[36] == 'Y') && (line[37] == 'E')) {
				    /* CRC is Ok, continue */
				    fgets(line, 50, fp);
				    line[strlen(line)-1] = '\0';
				    strtok(line, (char *)"=");
				    p = strtok(NULL, (char *)"=");
				    rc = sscanf(p, "%d", &temp);
#ifdef HAVE_WIRINGPI_H
				    piLock(LOCK_DEVICES);
#endif
				    if ((rc == 1) && (device->value != temp)) {
					device->value = temp;
				    	device->timestamp = time(NULL);
				    }
#ifdef HAVE_WIRINGPI_H
				    piUnlock(LOCK_DEVICES);
#endif
				} else {
				    syslog(LOG_WARNING, "sensor %s CRC error", device->address);
#ifdef HAVE_WIRINGPI_H
				    piLock(LOCK_DEVICES);                
#endif
				    device->present = DEVPRESENT_ERROR;
#ifdef HAVE_WIRINGPI_H
				    piUnlock(LOCK_DEVICES);              
#endif
				}
				fclose(fp);
			    } else {
				if (device->present != DEVPRESENT_NO) {
				    syslog(LOG_WARNING, "sensor %s is missing", device->address);
#ifdef HAVE_WIRINGPI_H
				    piLock(LOCK_DEVICES);                
#endif
				    device->present = DEVPRESENT_NO;
#ifdef HAVE_WIRINGPI_H          
				    piUnlock(LOCK_DEVICES);              
#endif
				}
			    }
			    free(addr);
			    addr = NULL;
			}
			break;

#ifdef HAVE_WIRINGPI_H
		case DEVTYPE_DHT:
			/*
			 * Make sure we don't read the sensor withing 2 seconds.
			 */
			now = time(NULL);
			if ((int)(now - dht11_last) > 2) {
			    dht11_pin = device->gpiopin;
			    dht11Read();
			    dht11_last = now;
			}
			if (device->subdevice == 0) {
			    piLock(LOCK_DEVICES);
			    if (dht11_valid) {
				device->value = dht11_temperature * 1000;
				device->timestamp = time(NULL);
				device->present = DEVPRESENT_YES;
			    } else {
				device->present = DEVPRESENT_ERROR;
			    }
			    piUnlock(LOCK_DEVICES);
			} else if (device->subdevice == 1) {
			    piLock(LOCK_DEVICES);
			    if (dht11_valid) {
				device->value = dht11_humidity * 1000;
				device->timestamp = time(NULL);
				device->present = DEVPRESENT_YES;
			    } else {
				device->present = DEVPRESENT_ERROR;
			    }
			    piUnlock(LOCK_DEVICES);
			}
			break;
#endif

		default:
			break;
	    }

	    /*
	     * Delay a bit after procesing a device.
	     */
	    usleep(10000);
	}
	/*
	 * Delay a bit after all devices
	 */
	usleep(100000);
    }

    syslog(LOG_NOTICE, "Thread my_devices_loop stopped");
    return 0;
}