Mercurial
>
mbsePi-apps
/ graph
Search:
summary
shortlog
changelog
graph
tags
bookmarks
branches
files
zip
gz
help
graph
The revision graph only works with JavaScript-enabled browsers.
Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
Fri, 19 May 2017 16:34:21 +0200
, by Michiel Broek
Turn off MQTT debug
Mon, 08 May 2017 20:54:51 +0200
, by Michiel Broek
Add Raspberry support in MQTT init message
Mon, 08 May 2017 17:03:25 +0200
, by Michiel Broek
Extra shutdown delay
Mon, 08 May 2017 16:32:43 +0200
, by Michiel Broek
New MQTT protocol
Mon, 08 May 2017 16:26:02 +0200
, by Michiel Broek
Small fix
Sat, 29 Apr 2017 17:47:00 +0200
, by Michiel Broek
Added some MQTT publish clear functions. Version 0.5.8
Sat, 29 Apr 2017 17:07:36 +0200
, by Michiel Broek
Better door and 12 volt detection and logging
Thu, 12 May 2016 21:43:07 +0200
, by Michiel Broek
Fixed some MQTT messages. Added more profile MQTT messages. Version 0.5.7
Wed, 11 May 2016 14:47:27 +0200
, by Michiel Broek
Bumped to version 0.5.6
Mon, 09 May 2016 21:37:25 +0200
, by Michiel Broek
Units now have an unique alias name so that the MQTT messages are more friendly.
Mon, 09 May 2016 21:35:55 +0200
, by Michiel Broek
Created mqtt sourcefiles. Use flags to trigger publish messages. The main source does not know and does not care if MQTT messages will be sent. Version 0.5.5
Mon, 02 May 2016 16:15:37 +0200
, by Michiel Broek
Fixed empty setpoint values
Sat, 30 Apr 2016 21:25:10 +0200
, by Michiel Broek
Compiles mosquitto code if library is found on the system. Bumped to version 0.5.4
Sat, 30 Apr 2016 21:06:20 +0200
, by Michiel Broek
The FAN always runs if the unit is active. Bumped tp version 0.5.3
Sat, 26 Mar 2016 14:43:31 +0100
, by Michiel Broek
Code cleanup.
Thu, 17 Mar 2016 23:28:29 +0100
, by Michiel Broek
Fix Deadlok problem when there is only a heater or a cooler.
Thu, 17 Mar 2016 17:25:02 +0100
, by Michiel Broek
Fixed server log when changed PID parameters from the web interface.
Thu, 17 Mar 2016 17:10:41 +0100
, by Michiel Broek
Changed PID code. PID parameters are now stored 3 digits instead of 2 behind the decimal point. Prevent extreme heating or cooling in Beer mode. Heat and Cool lockdown now allows the lagest value to win instead of zero them both. PID output treshold from 2% to 50%.
Fri, 11 Mar 2016 20:27:02 +0100
, by Michiel Broek
Switched PID to BOO mode for all modes.
Sat, 05 Mar 2016 12:50:23 +0100
, by Michiel Broek
Remove temporary marker.
Fri, 26 Feb 2016 15:14:00 +0100
, by Michiel Broek
Swapped heat/cool symbols.
Fri, 26 Feb 2016 13:38:44 +0100
, by Michiel Broek
Small brewpanel display error fix, did not affect real hardware.
Thu, 25 Feb 2016 23:24:50 +0100
, by Michiel Broek
Bumped to version 0.5.2 and removed the brewco subdirectory because that has been implemented as Arduino project.
Thu, 25 Feb 2016 23:14:46 +0100
, by Michiel Broek
Compacted LCD display for units, allways 4 instead of 4 to 6 lines. But it's a bit more cryptic. We could write a short manual.
Thu, 25 Feb 2016 22:42:54 +0100
, by Michiel Broek
Fixed compiler warning
Thu, 25 Feb 2016 20:26:40 +0100
, by Michiel Broek
Use user defined characters for the LCD display just like in Arduino projects.
Thu, 25 Feb 2016 20:12:27 +0100
, by Michiel Broek
Merge
Mon, 22 Feb 2016 19:24:49 +0100
, by Michiel Broek
Simulate sensors resolution.
Mon, 22 Feb 2016 19:22:39 +0100
, by Michiel Broek
Less PID debug logging.
Thu, 31 Dec 2015 21:03:52 +0100
, by Michiel Broek
Fixed compiling on real Pi's
Thu, 31 Dec 2015 20:52:28 +0100
, by Michiel Broek
Bild target temperature 0.1 degree higher. Removed debug log from the simulator
Sun, 27 Dec 2015 20:52:52 +0100
, by Michiel Broek
The simulator now simulates the heater power in Watts. Changed Mash Remove? prompt.
Sun, 27 Dec 2015 20:21:06 +0100
, by Michiel Broek
Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.
Sun, 27 Dec 2015 17:52:26 +0100
, by Michiel Broek
Moved mash added question to after mash rest mash-in step.
Sun, 27 Dec 2015 17:18:58 +0100
, by Michiel Broek
Updated several prompts. Added pump prime. Added first part of a test plan.
Sun, 27 Dec 2015 16:09:44 +0100
, by Michiel Broek
Improved steps logging. Some small fixes in the brew automation.
Sat, 26 Dec 2015 23:35:42 +0100
, by Michiel Broek
The brew state machine is complete, works but is not bugfree
Sat, 26 Dec 2015 21:45:44 +0100
, by Michiel Broek
Added initial part of the brew automation.
Tue, 22 Dec 2015 21:07:14 +0100
, by Michiel Broek
Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.
Tue, 22 Dec 2015 15:59:26 +0100
, by Michiel Broek
Revised brew steps again
Mon, 21 Dec 2015 22:53:29 +0100
, by Michiel Broek
Revised brew steps
Mon, 21 Dec 2015 22:36:30 +0100
, by Michiel Broek
Removed LCD auto dim mode, the display is allways on if this program runs.
Mon, 21 Dec 2015 21:21:16 +0100
, by Michiel Broek
Finished manual mode.
Mon, 21 Dec 2015 21:09:36 +0100
, by Michiel Broek
Manual mode works with heat percentages.
Sun, 20 Dec 2015 23:26:03 +0100
, by Michiel Broek
Added program locking.
Sun, 20 Dec 2015 20:52:37 +0100
, by Michiel Broek
Added file copy. Move home directory detection to the main program function. During opening of the main configuration file, backups are made, 10 revisions in total.
Sun, 20 Dec 2015 20:37:40 +0100
, by Michiel Broek
Completed the recipe editor.
Thu, 17 Dec 2015 22:45:54 +0100
, by Michiel Broek
Added recipe setup display menu.
Wed, 16 Dec 2015 22:54:53 +0100
, by Michiel Broek
Changed some prompt numbers. Added name editor.
Wed, 16 Dec 2015 22:06:11 +0100
, by Michiel Broek
Removed some development traces.
Tue, 15 Dec 2015 23:14:00 +0100
, by Michiel Broek
Added the beginning of the recipes editor. Added load and save of recipes file.
Tue, 15 Dec 2015 23:11:42 +0100
, by Michiel Broek
Fixes for compiling on Raspberry.
Sat, 12 Dec 2015 22:17:25 +0100
, by Michiel Broek
Updated configuration to allow hopstands.
Sat, 12 Dec 2015 21:47:04 +0100
, by Michiel Broek
Build a simulated immersion chiller. It will start on SIGUSR1 signal and stop on a SIGUSR2 signal. Hardcoded is te coolwater temperature at 14 degrees celcius.
Sat, 12 Dec 2015 21:20:46 +0100
, by Michiel Broek
Most parts of the simulator are working, needs some tuning.
Sat, 12 Dec 2015 19:31:35 +0100
, by Michiel Broek
Beginning of the main program loop
Fri, 11 Dec 2015 15:52:37 +0100
, by Michiel Broek
Moved manual menu to it's own function.
Thu, 10 Dec 2015 21:34:28 +0100
, by Michiel Broek
Changed device outputs and status leds.
Thu, 10 Dec 2015 17:31:45 +0100
, by Michiel Broek
Manual mode added.
Thu, 10 Dec 2015 15:58:01 +0100
, by Michiel Broek
Added selecting output relays.
Sun, 06 Dec 2015 20:23:31 +0100
, by Michiel Broek
Added selecting sensors.
Sun, 06 Dec 2015 19:34:39 +0100
, by Michiel Broek
Added PID editor.
Sun, 06 Dec 2015 14:29:37 +0100
, by Michiel Broek
Read/Write PID parameters from configuration.
Sun, 06 Dec 2015 12:34:44 +0100
, by Michiel Broek
Switched to PID code from Arduino
Sat, 05 Dec 2015 21:46:22 +0100
, by Michiel Broek
Changed internal storage of temperatures to float. Added 2 prompts. Added editors for float and integer values. Added most of brewunit edit functions.
Fri, 04 Dec 2015 22:57:23 +0100
, by Michiel Broek
Better brew state field names.
Fri, 04 Dec 2015 14:21:25 +0100
, by Michiel Broek
Added programming display CGRAM. Added display of characters from CGRAM. Changed prompts to allow free prompt strings. More code for the brewsystem unit editor.
Wed, 02 Dec 2015 17:16:41 +0100
, by Michiel Broek
Split some sources
Sat, 28 Nov 2015 21:00:29 +0100
, by Michiel Broek
Added automate state file.
Sat, 28 Nov 2015 20:15:38 +0100
, by Michiel Broek
Added prompts for the LCD. Basic processing loop written.
Sat, 28 Nov 2015 13:47:00 +0100
, by Michiel Broek
Updated dependencies
Fri, 27 Nov 2015 22:56:26 +0100
, by Michiel Broek
Added simulator configuration.
Fri, 27 Nov 2015 22:56:00 +0100
, by Michiel Broek
Stop devices thread if the program ends.
Fri, 27 Nov 2015 22:00:23 +0100
, by Michiel Broek
Fixed compiling with wiringPi
Thu, 26 Nov 2015 22:52:48 +0100
, by Michiel Broek
More configuration items added.
Thu, 26 Nov 2015 22:47:42 +0100
, by Michiel Broek
Brewco first phase development configuration structure.
Wed, 25 Nov 2015 22:49:35 +0100
, by Michiel Broek
Bumped to version 0.5.1
Wed, 25 Nov 2015 16:39:25 +0100
, by Michiel Broek
The brewpanel can now run in daemon mode or debug mode.
Wed, 25 Nov 2015 15:48:01 +0100
, by Michiel Broek
Finished optional paneltype. Fixed all debug flags.
Wed, 25 Nov 2015 15:30:28 +0100
, by Michiel Broek
LCD backlight fixed to off state.
Fri, 20 Nov 2015 23:29:55 +0100
, by Michiel Broek
Dialog updates only
Fri, 20 Nov 2015 22:43:50 +0100
, by Michiel Broek
Fixed parameters pasing between different layers.
Fri, 20 Nov 2015 20:49:58 +0100
, by Michiel Broek
Initial part of LEDs and backlight implemented.
Thu, 19 Nov 2015 22:50:17 +0100
, by Michiel Broek
Moved global bit defines to config.h
Thu, 19 Nov 2015 21:17:26 +0100
, by Michiel Broek
Added LED objects to the SDL panel.
Thu, 19 Nov 2015 20:45:09 +0100
, by Michiel Broek
Updated design README
Thu, 19 Nov 2015 15:05:19 +0100
, by Michiel Broek
Fixed compiling for systems with wiringPi. Improved handling of udp sockets if there is no brewpanel running.
Sun, 15 Nov 2015 21:12:11 +0100
, by Michiel Broek
The brewpanel works, but still needs a lot more
Sat, 14 Nov 2015 23:40:51 +0100
, by Michiel Broek
Fixed compiling on a raspberry
Sat, 14 Nov 2015 17:00:37 +0100
, by Michiel Broek
The first ideas of the brewpanel simulation are in place.
Sat, 14 Nov 2015 16:52:33 +0100
, by Michiel Broek
Fixed compile
Sun, 08 Nov 2015 22:20:42 +0100
, by Michiel Broek
Reenabled code round LCD driver.
Sun, 08 Nov 2015 22:13:02 +0100
, by Michiel Broek
The server to panel socket protocol
Sun, 08 Nov 2015 21:24:52 +0100
, by Michiel Broek
Updated the panel layout.
Sun, 08 Nov 2015 20:47:55 +0100
, by Michiel Broek
Added cursor control, but no blinking yet.
Sun, 08 Nov 2015 20:30:04 +0100
, by Michiel Broek
The fontfile is now generated at the source site only to prevent the need for the imagemagic package on headless raspberries.
Sun, 08 Nov 2015 17:55:50 +0100
, by Michiel Broek
Updated dependencies.
Sun, 08 Nov 2015 17:50:01 +0100
, by Michiel Broek
Basic ideas to write to the simulated LCD display are in place.
Sun, 08 Nov 2015 17:49:29 +0100
, by Michiel Broek
Added configure message about SDL presence.
Sat, 07 Nov 2015 22:42:47 +0100
, by Michiel Broek
Fixed compiling on systems without SDL libraries, and they don't need tha brewpanel program.
Sat, 07 Nov 2015 22:34:28 +0100
, by Michiel Broek
Added a new brewpanel program that runs on an SDL/X screen. It will be an emulator for the hardware panels. Development version 0.5.0
Sat, 07 Nov 2015 22:04:17 +0100
, by Michiel Broek
Make sure that a DS2413 device used as input has the output latch turned off.
Mon, 05 Oct 2015 15:21:46 +0200
, by Michiel Broek
Removed thermometers program and directory. Version 0.4.3
Fri, 18 Sep 2015 12:55:49 +0200
, by Michiel Broek
Fixed compiling on a real RPi.
Thu, 17 Sep 2015 20:54:34 +0200
, by Michiel Broek
Code cleanup.
Thu, 17 Sep 2015 20:45:01 +0200
, by Michiel Broek
More tooltips again.
Thu, 17 Sep 2015 20:38:07 +0200
, by Michiel Broek
More tooltips
Thu, 17 Sep 2015 17:31:43 +0200
, by Michiel Broek
Set sane default profile values when not using a profile.
Thu, 17 Sep 2015 17:09:09 +0200
, by Michiel Broek
More fixes for profiles temperature window. Added the sliding beer/air target switch.
Thu, 17 Sep 2015 17:01:15 +0200
, by Michiel Broek
Adding tooltips in the liveview screen.
Thu, 17 Sep 2015 15:52:46 +0200
, by Michiel Broek
Changed frdige_mode paramater to 0..100 so we can work with a percentage.
Thu, 17 Sep 2015 13:15:23 +0200
, by Michiel Broek
less
more
|
(0)
-112
+112
tip