Mercurial
>
mbsePi-apps
/ graph
Search:
summary
shortlog
changelog
graph
tags
bookmarks
branches
files
zip
gz
help
graph
The revision graph only works with JavaScript-enabled browsers.
Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
Fri, 19 May 2017 16:34:21 +0200
, by Michiel Broek
Turn off MQTT debug
Mon, 08 May 2017 20:54:51 +0200
, by Michiel Broek
Add Raspberry support in MQTT init message
Mon, 08 May 2017 17:03:25 +0200
, by Michiel Broek
Extra shutdown delay
Mon, 08 May 2017 16:32:43 +0200
, by Michiel Broek
New MQTT protocol
Mon, 08 May 2017 16:26:02 +0200
, by Michiel Broek
Small fix
Sat, 29 Apr 2017 17:47:00 +0200
, by Michiel Broek
Added some MQTT publish clear functions. Version 0.5.8
Sat, 29 Apr 2017 17:07:36 +0200
, by Michiel Broek
Better door and 12 volt detection and logging
Thu, 12 May 2016 21:43:07 +0200
, by Michiel Broek
Fixed some MQTT messages. Added more profile MQTT messages. Version 0.5.7
Wed, 11 May 2016 14:47:27 +0200
, by Michiel Broek
Bumped to version 0.5.6
Mon, 09 May 2016 21:37:25 +0200
, by Michiel Broek
Units now have an unique alias name so that the MQTT messages are more friendly.
Mon, 09 May 2016 21:35:55 +0200
, by Michiel Broek
Created mqtt sourcefiles. Use flags to trigger publish messages. The main source does not know and does not care if MQTT messages will be sent. Version 0.5.5
Mon, 02 May 2016 16:15:37 +0200
, by Michiel Broek
Fixed empty setpoint values
Sat, 30 Apr 2016 21:25:10 +0200
, by Michiel Broek
Compiles mosquitto code if library is found on the system. Bumped to version 0.5.4
Sat, 30 Apr 2016 21:06:20 +0200
, by Michiel Broek
The FAN always runs if the unit is active. Bumped tp version 0.5.3
Sat, 26 Mar 2016 14:43:31 +0100
, by Michiel Broek
Code cleanup.
Thu, 17 Mar 2016 23:28:29 +0100
, by Michiel Broek
Fix Deadlok problem when there is only a heater or a cooler.
Thu, 17 Mar 2016 17:25:02 +0100
, by Michiel Broek
Fixed server log when changed PID parameters from the web interface.
Thu, 17 Mar 2016 17:10:41 +0100
, by Michiel Broek
Changed PID code. PID parameters are now stored 3 digits instead of 2 behind the decimal point. Prevent extreme heating or cooling in Beer mode. Heat and Cool lockdown now allows the lagest value to win instead of zero them both. PID output treshold from 2% to 50%.
Fri, 11 Mar 2016 20:27:02 +0100
, by Michiel Broek
Switched PID to BOO mode for all modes.
Sat, 05 Mar 2016 12:50:23 +0100
, by Michiel Broek
Remove temporary marker.
Fri, 26 Feb 2016 15:14:00 +0100
, by Michiel Broek
Swapped heat/cool symbols.
Fri, 26 Feb 2016 13:38:44 +0100
, by Michiel Broek
Small brewpanel display error fix, did not affect real hardware.
Thu, 25 Feb 2016 23:24:50 +0100
, by Michiel Broek
Bumped to version 0.5.2 and removed the brewco subdirectory because that has been implemented as Arduino project.
Thu, 25 Feb 2016 23:14:46 +0100
, by Michiel Broek
Compacted LCD display for units, allways 4 instead of 4 to 6 lines. But it's a bit more cryptic. We could write a short manual.
Thu, 25 Feb 2016 22:42:54 +0100
, by Michiel Broek
Fixed compiler warning
Thu, 25 Feb 2016 20:26:40 +0100
, by Michiel Broek
Use user defined characters for the LCD display just like in Arduino projects.
Thu, 25 Feb 2016 20:12:27 +0100
, by Michiel Broek
Merge
Mon, 22 Feb 2016 19:24:49 +0100
, by Michiel Broek
Simulate sensors resolution.
Mon, 22 Feb 2016 19:22:39 +0100
, by Michiel Broek
Less PID debug logging.
Thu, 31 Dec 2015 21:03:52 +0100
, by Michiel Broek
Fixed compiling on real Pi's
Thu, 31 Dec 2015 20:52:28 +0100
, by Michiel Broek
Bild target temperature 0.1 degree higher. Removed debug log from the simulator
Sun, 27 Dec 2015 20:52:52 +0100
, by Michiel Broek
The simulator now simulates the heater power in Watts. Changed Mash Remove? prompt.
Sun, 27 Dec 2015 20:21:06 +0100
, by Michiel Broek
Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.
Sun, 27 Dec 2015 17:52:26 +0100
, by Michiel Broek
Moved mash added question to after mash rest mash-in step.
Sun, 27 Dec 2015 17:18:58 +0100
, by Michiel Broek
Updated several prompts. Added pump prime. Added first part of a test plan.
Sun, 27 Dec 2015 16:09:44 +0100
, by Michiel Broek
Improved steps logging. Some small fixes in the brew automation.
Sat, 26 Dec 2015 23:35:42 +0100
, by Michiel Broek
The brew state machine is complete, works but is not bugfree
Sat, 26 Dec 2015 21:45:44 +0100
, by Michiel Broek
Added initial part of the brew automation.
Tue, 22 Dec 2015 21:07:14 +0100
, by Michiel Broek
Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.
Tue, 22 Dec 2015 15:59:26 +0100
, by Michiel Broek
Revised brew steps again
Mon, 21 Dec 2015 22:53:29 +0100
, by Michiel Broek
Revised brew steps
Mon, 21 Dec 2015 22:36:30 +0100
, by Michiel Broek
Removed LCD auto dim mode, the display is allways on if this program runs.
Mon, 21 Dec 2015 21:21:16 +0100
, by Michiel Broek
Finished manual mode.
Mon, 21 Dec 2015 21:09:36 +0100
, by Michiel Broek
Manual mode works with heat percentages.
Sun, 20 Dec 2015 23:26:03 +0100
, by Michiel Broek
Added program locking.
Sun, 20 Dec 2015 20:52:37 +0100
, by Michiel Broek
Added file copy. Move home directory detection to the main program function. During opening of the main configuration file, backups are made, 10 revisions in total.
Sun, 20 Dec 2015 20:37:40 +0100
, by Michiel Broek
Completed the recipe editor.
Thu, 17 Dec 2015 22:45:54 +0100
, by Michiel Broek
Added recipe setup display menu.
Wed, 16 Dec 2015 22:54:53 +0100
, by Michiel Broek
Changed some prompt numbers. Added name editor.
Wed, 16 Dec 2015 22:06:11 +0100
, by Michiel Broek
Removed some development traces.
Tue, 15 Dec 2015 23:14:00 +0100
, by Michiel Broek
Added the beginning of the recipes editor. Added load and save of recipes file.
Tue, 15 Dec 2015 23:11:42 +0100
, by Michiel Broek
Fixes for compiling on Raspberry.
Sat, 12 Dec 2015 22:17:25 +0100
, by Michiel Broek
Updated configuration to allow hopstands.
Sat, 12 Dec 2015 21:47:04 +0100
, by Michiel Broek
Build a simulated immersion chiller. It will start on SIGUSR1 signal and stop on a SIGUSR2 signal. Hardcoded is te coolwater temperature at 14 degrees celcius.
Sat, 12 Dec 2015 21:20:46 +0100
, by Michiel Broek
Most parts of the simulator are working, needs some tuning.
Sat, 12 Dec 2015 19:31:35 +0100
, by Michiel Broek
Beginning of the main program loop
Fri, 11 Dec 2015 15:52:37 +0100
, by Michiel Broek
Moved manual menu to it's own function.
Thu, 10 Dec 2015 21:34:28 +0100
, by Michiel Broek
Changed device outputs and status leds.
Thu, 10 Dec 2015 17:31:45 +0100
, by Michiel Broek
Manual mode added.
Thu, 10 Dec 2015 15:58:01 +0100
, by Michiel Broek
Added selecting output relays.
Sun, 06 Dec 2015 20:23:31 +0100
, by Michiel Broek
Added selecting sensors.
Sun, 06 Dec 2015 19:34:39 +0100
, by Michiel Broek
Added PID editor.
Sun, 06 Dec 2015 14:29:37 +0100
, by Michiel Broek
Read/Write PID parameters from configuration.
Sun, 06 Dec 2015 12:34:44 +0100
, by Michiel Broek
Switched to PID code from Arduino
Sat, 05 Dec 2015 21:46:22 +0100
, by Michiel Broek
Changed internal storage of temperatures to float. Added 2 prompts. Added editors for float and integer values. Added most of brewunit edit functions.
Fri, 04 Dec 2015 22:57:23 +0100
, by Michiel Broek
Better brew state field names.
Fri, 04 Dec 2015 14:21:25 +0100
, by Michiel Broek
Added programming display CGRAM. Added display of characters from CGRAM. Changed prompts to allow free prompt strings. More code for the brewsystem unit editor.
Wed, 02 Dec 2015 17:16:41 +0100
, by Michiel Broek
Split some sources
Sat, 28 Nov 2015 21:00:29 +0100
, by Michiel Broek
Added automate state file.
Sat, 28 Nov 2015 20:15:38 +0100
, by Michiel Broek
Added prompts for the LCD. Basic processing loop written.
Sat, 28 Nov 2015 13:47:00 +0100
, by Michiel Broek
Updated dependencies
Fri, 27 Nov 2015 22:56:26 +0100
, by Michiel Broek
Added simulator configuration.
Fri, 27 Nov 2015 22:56:00 +0100
, by Michiel Broek
Stop devices thread if the program ends.
Fri, 27 Nov 2015 22:00:23 +0100
, by Michiel Broek
Fixed compiling with wiringPi
Thu, 26 Nov 2015 22:52:48 +0100
, by Michiel Broek
More configuration items added.
Thu, 26 Nov 2015 22:47:42 +0100
, by Michiel Broek
Brewco first phase development configuration structure.
Wed, 25 Nov 2015 22:49:35 +0100
, by Michiel Broek
Bumped to version 0.5.1
Wed, 25 Nov 2015 16:39:25 +0100
, by Michiel Broek
The brewpanel can now run in daemon mode or debug mode.
Wed, 25 Nov 2015 15:48:01 +0100
, by Michiel Broek
Finished optional paneltype. Fixed all debug flags.
Wed, 25 Nov 2015 15:30:28 +0100
, by Michiel Broek
LCD backlight fixed to off state.
Fri, 20 Nov 2015 23:29:55 +0100
, by Michiel Broek
Dialog updates only
Fri, 20 Nov 2015 22:43:50 +0100
, by Michiel Broek
Fixed parameters pasing between different layers.
Fri, 20 Nov 2015 20:49:58 +0100
, by Michiel Broek
Initial part of LEDs and backlight implemented.
Thu, 19 Nov 2015 22:50:17 +0100
, by Michiel Broek
Moved global bit defines to config.h
Thu, 19 Nov 2015 21:17:26 +0100
, by Michiel Broek
Added LED objects to the SDL panel.
Thu, 19 Nov 2015 20:45:09 +0100
, by Michiel Broek
Updated design README
Thu, 19 Nov 2015 15:05:19 +0100
, by Michiel Broek
Fixed compiling for systems with wiringPi. Improved handling of udp sockets if there is no brewpanel running.
Sun, 15 Nov 2015 21:12:11 +0100
, by Michiel Broek
The brewpanel works, but still needs a lot more
Sat, 14 Nov 2015 23:40:51 +0100
, by Michiel Broek
Fixed compiling on a raspberry
Sat, 14 Nov 2015 17:00:37 +0100
, by Michiel Broek
The first ideas of the brewpanel simulation are in place.
Sat, 14 Nov 2015 16:52:33 +0100
, by Michiel Broek
Fixed compile
Sun, 08 Nov 2015 22:20:42 +0100
, by Michiel Broek
Reenabled code round LCD driver.
Sun, 08 Nov 2015 22:13:02 +0100
, by Michiel Broek
The server to panel socket protocol
Sun, 08 Nov 2015 21:24:52 +0100
, by Michiel Broek
Updated the panel layout.
Sun, 08 Nov 2015 20:47:55 +0100
, by Michiel Broek
Added cursor control, but no blinking yet.
Sun, 08 Nov 2015 20:30:04 +0100
, by Michiel Broek
The fontfile is now generated at the source site only to prevent the need for the imagemagic package on headless raspberries.
Sun, 08 Nov 2015 17:55:50 +0100
, by Michiel Broek
Updated dependencies.
Sun, 08 Nov 2015 17:50:01 +0100
, by Michiel Broek
Basic ideas to write to the simulated LCD display are in place.
Sun, 08 Nov 2015 17:49:29 +0100
, by Michiel Broek
Added configure message about SDL presence.
Sat, 07 Nov 2015 22:42:47 +0100
, by Michiel Broek
Fixed compiling on systems without SDL libraries, and they don't need tha brewpanel program.
Sat, 07 Nov 2015 22:34:28 +0100
, by Michiel Broek
Added a new brewpanel program that runs on an SDL/X screen. It will be an emulator for the hardware panels. Development version 0.5.0
Sat, 07 Nov 2015 22:04:17 +0100
, by Michiel Broek
Make sure that a DS2413 device used as input has the output latch turned off.
Mon, 05 Oct 2015 15:21:46 +0200
, by Michiel Broek
Removed thermometers program and directory. Version 0.4.3
Fri, 18 Sep 2015 12:55:49 +0200
, by Michiel Broek
Fixed compiling on a real RPi.
Thu, 17 Sep 2015 20:54:34 +0200
, by Michiel Broek
Code cleanup.
Thu, 17 Sep 2015 20:45:01 +0200
, by Michiel Broek
More tooltips again.
Thu, 17 Sep 2015 20:38:07 +0200
, by Michiel Broek
More tooltips
Thu, 17 Sep 2015 17:31:43 +0200
, by Michiel Broek
Set sane default profile values when not using a profile.
Thu, 17 Sep 2015 17:09:09 +0200
, by Michiel Broek
More fixes for profiles temperature window. Added the sliding beer/air target switch.
Thu, 17 Sep 2015 17:01:15 +0200
, by Michiel Broek
Adding tooltips in the liveview screen.
Thu, 17 Sep 2015 15:52:46 +0200
, by Michiel Broek
Changed frdige_mode paramater to 0..100 so we can work with a percentage.
Thu, 17 Sep 2015 13:15:23 +0200
, by Michiel Broek
Fixed crash after profile is finished. Fixed error in UNIT GET output.
Thu, 17 Sep 2015 13:09:29 +0200
, by Michiel Broek
Fermentation profiles now have a low and high temperature setting so that you can use a temperture window. Each profile step can now set for beer or air temperature reference. The logfiles have an extra temperature field for this. Bumped to version 0.4.2.
Wed, 16 Sep 2015 22:05:05 +0200
, by Michiel Broek
Bumped to version 0.4.1
Tue, 15 Sep 2015 17:29:15 +0200
, by Michiel Broek
Switched to new device read code. Removed the incomplete support for the DS2408 1-wire chip.
Tue, 15 Sep 2015 17:26:26 +0200
, by Michiel Broek
Spelling correction.
Tue, 15 Sep 2015 15:37:39 +0200
, by Michiel Broek
Fixed initialisation of new GPIO RS433 and DHT11 devices.
Tue, 15 Sep 2015 14:50:35 +0200
, by Michiel Broek
Fixed initialisation of new GPIO devices.
Tue, 15 Sep 2015 14:44:21 +0200
, by Michiel Broek
Bumped from version 0.3.7 to stable version 0.4.0
Thu, 20 Aug 2015 21:14:44 +0200
, by Michiel Broek
Graphs stepping should now work for archives and current fermenters.
Thu, 20 Aug 2015 15:58:32 +0200
, by Michiel Broek
Graph lines logging can handle longer logfiles and has a safety limit.
Thu, 20 Aug 2015 14:32:56 +0200
, by Michiel Broek
Create a new configuration file if it doesn't exist.
Wed, 19 Aug 2015 22:09:17 +0200
, by Michiel Broek
Changed graph spline type into line type.
Sat, 15 Aug 2015 11:27:54 +0200
, by Michiel Broek
Fixed adding a new unit.
Fri, 07 Aug 2015 11:29:23 +0200
, by Michiel Broek
Fixed month display in live view and archive view. Bumped to version 0.3.7.
Sun, 02 Aug 2015 14:17:10 +0200
, by Michiel Broek
Fixed date display formatting on the web pages. Tooltips display date and time, the normal X-axis only the date.
Tue, 21 Jul 2015 21:20:57 +0200
, by Michiel Broek
Bumped from version 0.3.5 to version 0.3.6.
Sat, 27 Jun 2015 17:28:16 +0200
, by Michiel Broek
Moved the simulators button in the maintenance panel
Sat, 27 Jun 2015 16:15:23 +0200
, by Michiel Broek
Only write configuration if something changed.
Sat, 27 Jun 2015 14:24:39 +0200
, by Michiel Broek
Help screens for the commands are moved into the commands.
Sat, 27 Jun 2015 14:08:49 +0200
, by Michiel Broek
Small code cleanup
Sat, 27 Jun 2015 12:52:04 +0200
, by Michiel Broek
Fixed profile steps updateing from the web interface.
Fri, 26 Jun 2015 13:42:05 +0200
, by Michiel Broek
Bumped to version 0.3.5
Sun, 21 Jun 2015 20:15:43 +0200
, by Michiel Broek
Improved Archives View layout.
Sun, 21 Jun 2015 20:09:51 +0200
, by Michiel Broek
In Archives, remove .log from download and view functions. Added new Save as PDF buttons.
Sun, 21 Jun 2015 19:51:58 +0200
, by Michiel Broek
Fixed php scripts for jqwidgets version 3.8.0
Sun, 14 Jun 2015 22:48:45 +0200
, by Michiel Broek
Upgraded jqwidgets from version 3.7.1 to version 3.8.0
Sun, 14 Jun 2015 20:39:36 +0200
, by Michiel Broek
Bumped to development version 0.3.4
Tue, 02 Jun 2015 22:37:08 +0200
, by Michiel Broek
Prevent undefined variables in getstate.php
Tue, 02 Jun 2015 21:52:48 +0200
, by Michiel Broek
Fixed memory leak in wrconfig
Tue, 02 Jun 2015 19:57:53 +0200
, by Michiel Broek
Removed debug log message
Tue, 02 Jun 2015 17:50:05 +0200
, by Michiel Broek
Fix for server crash
Tue, 02 Jun 2015 17:13:13 +0200
, by Michiel Broek
Fixed compiling on a real RPi
Tue, 02 Jun 2015 14:14:20 +0200
, by Michiel Broek
Better simulator temperature reality
Tue, 02 Jun 2015 14:03:46 +0200
, by Michiel Broek
Version 0.3.3, still not for production. Fixed warnings when the simulator code is compiled. Slowed the simulator air temperature change 60 times. More realistic temperature changes for the heater and cooler elements. Improved logic in the simulator.
Mon, 18 May 2015 21:19:06 +0200
, by Michiel Broek
Tuning PID code. Samll changes on the unit web page.
Sun, 17 May 2015 23:23:25 +0200
, by Michiel Broek
Back to the old PID algorythm. Version 0.3.1.
Sun, 17 May 2015 19:34:55 +0200
, by Michiel Broek
Made the client-server protocol more robust. When a change to a unit is made using the web interface, the main process is stopped during the update. Splitted the PID in two PID's, one for heating and one for cooling. Adjusted the web edit scrreen for this, but there are still rough edges. Replaced the PID code, maybe this one works better for our purpose. The simulator air temperature changes on the simulator heater and cooler, but it is not realistic at all. This is a development version, do not use in production. The version is 0.3.0
Sat, 16 May 2015 17:39:30 +0200
, by Michiel Broek
Experiment with zero window
Thu, 14 May 2015 22:03:35 +0200
, by Michiel Broek
Leds on if any state value is set.
Sun, 05 Apr 2015 11:09:45 +0200
, by Michiel Broek
Added ARCHIVE GET file download command.
Thu, 02 Apr 2015 23:24:32 +0200
, by Michiel Broek
Plot room temperature on the dashboard.
Thu, 02 Apr 2015 22:23:18 +0200
, by Michiel Broek
Added ARCHIVE LOG view.
Thu, 02 Apr 2015 22:08:15 +0200
, by Michiel Broek
Added room temperature to ARCHIVE LOG command output.
Thu, 02 Apr 2015 21:53:28 +0200
, by Michiel Broek
Added logging of the room temperature.
Wed, 01 Apr 2015 23:13:08 +0200
, by Michiel Broek
Fixed compile issue on non-Pi systems
Wed, 01 Apr 2015 22:54:27 +0200
, by Michiel Broek
Bumped to version 0.2.13.
Wed, 01 Apr 2015 22:39:27 +0200
, by Michiel Broek
Improved regular logging, disabled some debug logging.
Wed, 01 Apr 2015 22:37:28 +0200
, by Michiel Broek
Fixed auto device update timer
Wed, 01 Apr 2015 22:10:59 +0200
, by Michiel Broek
Added door and PSU sensors. Added interior light logic and switching.
Wed, 01 Apr 2015 21:56:35 +0200
, by Michiel Broek
Added Fan delay logic.
Wed, 01 Apr 2015 17:28:26 +0200
, by Michiel Broek
Changed Fan switch logic.
Wed, 01 Apr 2015 15:56:04 +0200
, by Michiel Broek
Completed DS2413 device code and driver.
Wed, 01 Apr 2015 15:20:05 +0200
, by Michiel Broek
Bumped to version 0.2.12
Thu, 26 Mar 2015 20:58:23 +0100
, by Michiel Broek
Added device direction and value in devices maintenance screen
Thu, 26 Mar 2015 20:55:43 +0100
, by Michiel Broek
Fixed Offset label in device editor. Added code to edit pin states for DS2408 and DS2413 1-wire devices.
Thu, 26 Mar 2015 20:34:53 +0100
, by Michiel Broek
Initialize offset to zero with new detected 1-wire devices.
Thu, 26 Mar 2015 16:40:53 +0100
, by Michiel Broek
Added device read for the DS2413 dual channel PIO
Mon, 23 Mar 2015 20:34:47 +0100
, by Michiel Broek
Possible part of DS2408 code added.
Fri, 20 Mar 2015 22:49:22 +0100
, by Michiel Broek
Experimental idea
Fri, 20 Mar 2015 22:22:18 +0100
, by Michiel Broek
Added defines copied from kernel source with 1-Wire device family numbers.
Fri, 20 Mar 2015 20:23:12 +0100
, by Michiel Broek
Added support for all 1-wire temperature sensors that are in the Linux kernel source.
Fri, 20 Mar 2015 16:56:07 +0100
, by Michiel Broek
More global device locking
Thu, 19 Mar 2015 20:32:23 +0100
, by Michiel Broek
Upgraded jqwidgets from version 3.6.0 to version 3.7.1
Wed, 18 Mar 2015 14:45:43 +0100
, by Michiel Broek
Added the README
Mon, 09 Mar 2015 09:42:18 +0100
, by Michiel Broek
Added url encoding
Sun, 08 Mar 2015 20:04:25 +0100
, by Michiel Broek
Added archives web page
Sun, 08 Mar 2015 19:52:53 +0100
, by Michiel Broek
Removed unused labview files
Sun, 08 Mar 2015 17:57:21 +0100
, by Michiel Broek
Added ARCHIVE LOG command
Sun, 08 Mar 2015 17:26:54 +0100
, by Michiel Broek
Improved help screen
Sun, 08 Mar 2015 16:51:19 +0100
, by Michiel Broek
Added ARCHIVE commands
Sun, 08 Mar 2015 16:40:25 +0100
, by Michiel Broek
Fixed error
Sat, 07 Mar 2015 14:40:08 +0100
, by Michiel Broek
Bumped to version 0.2.11
Sat, 07 Mar 2015 14:35:12 +0100
, by Michiel Broek
Changed die() handler
Sat, 07 Mar 2015 14:32:09 +0100
, by Michiel Broek
More device locks in the network server
Sat, 07 Mar 2015 13:36:45 +0100
, by Michiel Broek
Update for newer boards
Sat, 07 Mar 2015 12:08:00 +0100
, by Michiel Broek
Added extra lock
Sat, 07 Mar 2015 11:33:10 +0100
, by Michiel Broek
Bumped to version 0.2.10
Fri, 20 Feb 2015 16:07:39 +0100
, by Michiel Broek
Code cleanup and more conditions for debug temperature logging
Fri, 20 Feb 2015 16:05:29 +0100
, by Michiel Broek
The web dashboard now shows just 'history' on the graph
Thu, 19 Feb 2015 16:41:42 +0100
, by Michiel Broek
Actuators behind a PID now use power percentage instead of always 100%
Thu, 19 Feb 2015 16:39:35 +0100
, by Michiel Broek
Better protection, fixed fridge mode.
Thu, 19 Feb 2015 16:08:05 +0100
, by Michiel Broek
Simple temperature control in fridge mode.
Thu, 19 Feb 2015 15:43:43 +0100
, by Michiel Broek
Moved pid function to separate files
Thu, 19 Feb 2015 14:42:55 +0100
, by Michiel Broek
Better conditional PID logging
Tue, 17 Feb 2015 23:27:47 +0100
, by Michiel Broek
Restored blackout window
Mon, 16 Feb 2015 23:21:45 +0100
, by Michiel Broek
Code cleanup
Mon, 16 Feb 2015 20:41:09 +0100
, by Michiel Broek
Added more precision to the unit low and high black window margins. Switched to PID routine from Pid without a PhD. The PID compute routine is now in the one second loop. The switch delay times are now in seconds, 0..720.
Mon, 16 Feb 2015 19:52:42 +0100
, by Michiel Broek
PID changes and algorithm tuning.
Sun, 15 Feb 2015 23:09:00 +0100
, by Michiel Broek
Added Kp, Kd and Ki settings to the units. Bumped to version 0.2.9
Sun, 15 Feb 2015 20:38:54 +0100
, by Michiel Broek
Fixed logging of old pid error again
Sun, 15 Feb 2015 18:21:20 +0100
, by Michiel Broek
Fixed logging of old pid error
Sun, 15 Feb 2015 18:18:44 +0100
, by Michiel Broek
PID old error was not set to the previous value but was always zero.
Sun, 15 Feb 2015 18:06:21 +0100
, by Michiel Broek
Updated to add support for lights in a fermenter unit and a Power Supply status.
Sat, 07 Feb 2015 23:12:55 +0100
, by Michiel Broek
Better tab switching with a cookie
Wed, 14 Jan 2015 13:20:16 +0100
, by Michiel Broek
Added cookies to remember tabs
Wed, 14 Jan 2015 12:50:12 +0100
, by Michiel Broek
Added PING/PONG command to the server. Bumped to version 0.2.7
Wed, 17 Dec 2014 15:44:58 +0100
, by Michiel Broek
Use confirm instead of enter key when stepping to a new beer or fridge temperature
Mon, 01 Dec 2014 14:15:22 +0100
, by Michiel Broek
Upgraded jqwidgets to version 3.6.0
Sat, 29 Nov 2014 21:03:31 +0100
, by Michiel Broek
The LIST LOG command now automatic adjusts the number of output lines and resolution by calculating a reasonable interval between 1 and 60 minutes. Bumped to version 0.2.6
Sat, 29 Nov 2014 16:07:34 +0100
, by Michiel Broek
Show heater/cooler usgae in percent on the web page. Bunped to version 0.2.5
Sat, 15 Nov 2014 20:35:32 +0100
, by Michiel Broek
Fixed logfile header
Tue, 11 Nov 2014 16:19:07 +0100
, by Michiel Broek
Added usage counters to the beer logfiles. Bumped to version 0.2.4
Tue, 11 Nov 2014 16:10:48 +0100
, by Michiel Broek
Thinner lines for chart drawing
Sun, 02 Nov 2014 19:47:50 +0100
, by Michiel Broek
Added print and save as png buttons
Sun, 02 Nov 2014 18:00:05 +0100
, by Michiel Broek
Added comment
Sun, 02 Nov 2014 13:47:57 +0100
, by Michiel Broek
Added usage counters
Wed, 29 Oct 2014 20:27:37 +0100
, by Michiel Broek
Corrected margin labels
Wed, 29 Oct 2014 14:41:00 +0100
, by Michiel Broek
Corrected margin labels
Wed, 29 Oct 2014 14:36:53 +0100
, by Michiel Broek
Bumped to version 0.2.3
Sat, 25 Oct 2014 21:16:25 +0200
, by Michiel Broek
Added code to detect primary fermentation
Sat, 25 Oct 2014 21:08:47 +0200
, by Michiel Broek
Corrected comment
Wed, 22 Oct 2014 12:42:20 +0200
, by Michiel Broek
Make ajax response for profile state the same as the startup state
Thu, 04 Sep 2014 14:07:09 +0200
, by Michiel Broek
less
more
|
(0)
-224
+224
tip