Mercurial > mbsePi-apps / changelog

Updated the panel layout.

• Sun, 08 Nov 2015 20:47:55 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 20:47:55 +0100] rev 416
• Updated the panel layout.

Added cursor control, but no blinking yet.

• Sun, 08 Nov 2015 20:30:04 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 20:30:04 +0100] rev 415
• Added cursor control, but no blinking yet.

The fontfile is now generated at the source site only to prevent the need for the imagemagic package on headless raspberries.

• Sun, 08 Nov 2015 17:55:50 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 17:55:50 +0100] rev 414
• The fontfile is now generated at the source site only to prevent the need for the imagemagic package on headless raspberries.

Updated dependencies.

• Sun, 08 Nov 2015 17:50:01 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 17:50:01 +0100] rev 413
• Updated dependencies.

Basic ideas to write to the simulated LCD display are in place.

• Sun, 08 Nov 2015 17:49:29 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sun, 08 Nov 2015 17:49:29 +0100] rev 412
• Basic ideas to write to the simulated LCD display are in place.

Added configure message about SDL presence.

• Sat, 07 Nov 2015 22:42:47 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Nov 2015 22:42:47 +0100] rev 411
• Added configure message about SDL presence.

Fixed compiling on systems without SDL libraries, and they don't need tha brewpanel program.

• Sat, 07 Nov 2015 22:34:28 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Nov 2015 22:34:28 +0100] rev 410
• Fixed compiling on systems without SDL libraries, and they don't need tha brewpanel program.

Added a new brewpanel program that runs on an SDL/X screen. It will be an emulator for the hardware panels. Development version 0.5.0

• Sat, 07 Nov 2015 22:04:17 +0100
• by Michiel Broek <mbroek@mbse.eu> [Sat, 07 Nov 2015 22:04:17 +0100] rev 409
• Added a new brewpanel program that runs on an SDL/X screen. It will be an emulator for the hardware panels. Development version 0.5.0

Make sure that a DS2413 device used as input has the output latch turned off.

• Mon, 05 Oct 2015 15:21:46 +0200
• by Michiel Broek <mbroek@mbse.eu> [Mon, 05 Oct 2015 15:21:46 +0200] rev 408
• Make sure that a DS2413 device used as input has the output latch turned off.

Removed thermometers program and directory. Version 0.4.3

• Fri, 18 Sep 2015 12:55:49 +0200
• by Michiel Broek <mbroek@mbse.eu> [Fri, 18 Sep 2015 12:55:49 +0200] rev 407
• Removed thermometers program and directory. Version 0.4.3

Fixed compiling on a real RPi.

• Thu, 17 Sep 2015 20:54:34 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 20:54:34 +0200] rev 406
• Fixed compiling on a real RPi.

Code cleanup.

• Thu, 17 Sep 2015 20:45:01 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 20:45:01 +0200] rev 405
• Code cleanup.

More tooltips again.

• Thu, 17 Sep 2015 20:38:07 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 20:38:07 +0200] rev 404
• More tooltips again.

More tooltips

• Thu, 17 Sep 2015 17:31:43 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 17:31:43 +0200] rev 403
• More tooltips

Set sane default profile values when not using a profile.

• Thu, 17 Sep 2015 17:09:09 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 17:09:09 +0200] rev 402
• Set sane default profile values when not using a profile.

More fixes for profiles temperature window. Added the sliding beer/air target switch.

• Thu, 17 Sep 2015 17:01:15 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 17:01:15 +0200] rev 401
• More fixes for profiles temperature window. Added the sliding beer/air target switch.

Adding tooltips in the liveview screen.

• Thu, 17 Sep 2015 15:52:46 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 15:52:46 +0200] rev 400
• Adding tooltips in the liveview screen.

Changed frdige_mode paramater to 0..100 so we can work with a percentage.

• Thu, 17 Sep 2015 13:15:23 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 13:15:23 +0200] rev 399
• Changed frdige_mode paramater to 0..100 so we can work with a percentage.

Fixed crash after profile is finished. Fixed error in UNIT GET output.

• Thu, 17 Sep 2015 13:09:29 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 17 Sep 2015 13:09:29 +0200] rev 398
• Fixed crash after profile is finished. Fixed error in UNIT GET output.

Fermentation profiles now have a low and high temperature setting so that you can use a temperture window. Each profile step can now set for beer or air temperature reference. The logfiles have an extra temperature field for this. Bumped to version 0.4.2.

• Wed, 16 Sep 2015 22:05:05 +0200
• by Michiel Broek <mbroek@mbse.eu> [Wed, 16 Sep 2015 22:05:05 +0200] rev 397
• Fermentation profiles now have a low and high temperature setting so that you can use a temperture window. Each profile step can now set for beer or air temperature reference. The logfiles have an extra temperature field for this. Bumped to version 0.4.2.

Bumped to version 0.4.1

• Tue, 15 Sep 2015 17:29:15 +0200
• by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 17:29:15 +0200] rev 396
• Bumped to version 0.4.1

Switched to new device read code. Removed the incomplete support for the DS2408 1-wire chip.

• Tue, 15 Sep 2015 17:26:26 +0200
• by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 17:26:26 +0200] rev 395
• Switched to new device read code. Removed the incomplete support for the DS2408 1-wire chip.

Spelling correction.

• Tue, 15 Sep 2015 15:37:39 +0200
• by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 15:37:39 +0200] rev 394
• Spelling correction.

Fixed initialisation of new GPIO RS433 and DHT11 devices.

• Tue, 15 Sep 2015 14:50:35 +0200
• by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 14:50:35 +0200] rev 393
• Fixed initialisation of new GPIO RS433 and DHT11 devices.

Fixed initialisation of new GPIO devices.

• Tue, 15 Sep 2015 14:44:21 +0200
• by Michiel Broek <mbroek@mbse.eu> [Tue, 15 Sep 2015 14:44:21 +0200] rev 392
• Fixed initialisation of new GPIO devices.

Bumped from version 0.3.7 to stable version 0.4.0

• Thu, 20 Aug 2015 21:14:44 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Aug 2015 21:14:44 +0200] rev 391
• Bumped from version 0.3.7 to stable version 0.4.0

Graphs stepping should now work for archives and current fermenters.

• Thu, 20 Aug 2015 15:58:32 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Aug 2015 15:58:32 +0200] rev 390
• Graphs stepping should now work for archives and current fermenters.

Graph lines logging can handle longer logfiles and has a safety limit.

• Thu, 20 Aug 2015 14:32:56 +0200
• by Michiel Broek <mbroek@mbse.eu> [Thu, 20 Aug 2015 14:32:56 +0200] rev 389
• Graph lines logging can handle longer logfiles and has a safety limit.

Create a new configuration file if it doesn't exist.

• Wed, 19 Aug 2015 22:09:17 +0200
• by Michiel Broek <mbroek@mbse.eu> [Wed, 19 Aug 2015 22:09:17 +0200] rev 388
• Create a new configuration file if it doesn't exist.

Changed graph spline type into line type.

• Sat, 15 Aug 2015 11:27:54 +0200
• by Michiel Broek <mbroek@mbse.eu> [Sat, 15 Aug 2015 11:27:54 +0200] rev 387
• Changed graph spline type into line type.