Sun, 07 Jul 2024 12:43:27 +0200 |
Michiel Broek |
Version 0.9.21. Temperature reading behind the debug flag
default tip
|
changeset |
files
|
Sat, 06 Jul 2024 19:28:08 +0200 |
Michiel Broek |
Handle subdevices during devices startup
|
changeset |
files
|
Sat, 06 Jul 2024 15:59:34 +0200 |
Michiel Broek |
Version 0.9.20
|
changeset |
files
|
Sat, 06 Jul 2024 15:55:14 +0200 |
Michiel Broek |
Fix to recover from a sensor in error.
|
changeset |
files
|
Sat, 06 Jul 2024 14:52:49 +0200 |
Michiel Broek |
Version 0.9.20b1. Removed debug logging from DHT11 reading. Fixed reading one-wire temperature sensors state when inserted or removed from the bus. Automatic backup device selection works now.
|
changeset |
files
|
Tue, 07 May 2024 14:11:31 +0200 |
Michiel Broek |
Save one devices loop when handling a 2413 device.
|
changeset |
files
|
Mon, 06 May 2024 15:34:32 +0200 |
Michiel Broek |
Version 0.9.20a2. Renamed one-wire struct resolution to rd_cache and added wr_cache. The rd_cache and wr_cache values are used by the DS2413. Added these values to the grid so we can see them live.
|
changeset |
files
|
Sun, 05 May 2024 17:24:54 +0200 |
Michiel Broek |
Much faster shutdown of the websocket service.
|
changeset |
files
|
Sun, 05 May 2024 16:31:47 +0200 |
Michiel Broek |
Made devices loop a bit slower.
|
changeset |
files
|
Sun, 05 May 2024 15:49:03 +0200 |
Michiel Broek |
Version 0.9.20a1. Analyse threads cpu usage. One-wire added a resolution flag to prevent continuous resolution checks, now only for new sensors and replugged known sensors. Added two 40 sSec delays in the state machine. In the panel thread moved a few locks so these expensive calls are called only when needed.
|
changeset |
files
|
Sat, 04 May 2024 19:10:03 +0200 |
Michiel Broek |
Different gettid() test
|
changeset |
files
|
Sat, 04 May 2024 17:37:47 +0200 |
Michiel Broek |
Added test for gettid()
|
changeset |
files
|
Sat, 04 May 2024 15:43:37 +0200 |
Michiel Broek |
Version 0.9.19
|
changeset |
files
|
Sat, 04 May 2024 15:18:02 +0200 |
Michiel Broek |
Log pid of each started thread so we can see which uses the most cpu time.
|
changeset |
files
|
Sat, 04 May 2024 13:49:36 +0200 |
Michiel Broek |
Fixed initial show instead of hide of the toggle switches. Block edit fermenter when the fermenter is in use.
|
changeset |
files
|
Fri, 03 May 2024 20:41:26 +0200 |
Michiel Broek |
In fermenter screen fix errors during page load.
|
changeset |
files
|
Fri, 03 May 2024 20:15:17 +0200 |
Michiel Broek |
Fixed updating PID parameters. Jqwidgets javascripts cleanup.
|
changeset |
files
|
Fri, 03 May 2024 16:58:40 +0200 |
Michiel Broek |
Removed some unused files
|
changeset |
files
|
Fri, 03 May 2024 16:53:00 +0200 |
Michiel Broek |
Last changes to fermenter.js (maybe). Simulator custom labels for the door switch. Some extra columns in the simulators grid.
|
changeset |
files
|
Fri, 03 May 2024 15:12:25 +0200 |
Michiel Broek |
Some javascript fixes and cleanup
|
changeset |
files
|
Fri, 03 May 2024 14:14:01 +0200 |
Michiel Broek |
Add new fermenter adds dummy yeast temperatures. Periodic thermferm unit logging adds the unit alias name. Added Green LED hide color. Moved getglobal.php to dbglobal.php. Adjusted several record types in global and fermenter javascript records so there is less guesswork. Only display control leds and switches for defined equipment.
|
changeset |
files
|
Thu, 02 May 2024 15:49:16 +0200 |
Michiel Broek |
Version 0.9.19b3. The simulator thread can be paused to be able to add and delete simulators. Added simulated door and PSU status. Devices can now fully use multiple simulators. Better rounding of simulated temperature values. The server SIMULATOR DEL and ADD commands pause the simulator when the linked list is manipulated. Fixed SIGSEGV when a simulator is added. Added socket SO_REUSEADDR again to the server socket.
|
changeset |
files
|
Wed, 01 May 2024 14:38:37 +0200 |
Michiel Broek |
Added device_present() function to easy update device present from one-wire and simulator devices. When a simulator temperature sensor present is changed, the device table is changed too. Controlling simulator relays is now for each simulator. The simulator runs under the state machine. If something changed in the running simulator, all data is broadcasted over websocket. Completed the web editor.
|
changeset |
files
|
Tue, 30 Apr 2024 17:26:41 +0200 |
Michiel Broek |
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
|
changeset |
files
|
Sun, 28 Apr 2024 15:50:42 +0200 |
Michiel Broek |
It was impossible to remove devices from fermenters. Added beer_address2 device to the simulator.
|
changeset |
files
|
Sun, 28 Apr 2024 14:25:26 +0200 |
Michiel Broek |
Log marking device missing if a onewire devices goes away. Fixes in fermenters display. Added Present and Inuse columns in devices list.
|
changeset |
files
|
Thu, 25 Apr 2024 16:44:54 +0200 |
Michiel Broek |
Version 0.9.19b1. Less noisy logging.
|
changeset |
files
|
Thu, 25 Apr 2024 15:10:37 +0200 |
Michiel Broek |
Moved webcam scripts over to this www directory. Upgraded jquery to 2.1.1 (still old).
|
changeset |
files
|
Thu, 25 Apr 2024 14:52:50 +0200 |
Michiel Broek |
Removed old webpages from the repository
|
changeset |
files
|
Thu, 25 Apr 2024 14:26:47 +0200 |
Michiel Broek |
Version 0.9.19a6. Fixes after a short trial on the production controller. Fixed json for alternate beer termperature sensor. Fixed division by 1000 for the room temperature and humidity values. The dropdown list for devices shows the address instead of description in the list.
|
changeset |
files
|
Wed, 24 Apr 2024 21:58:27 +0200 |
Michiel Broek |
Version 0.9.19a5
|
changeset |
files
|
Wed, 24 Apr 2024 21:36:49 +0200 |
Michiel Broek |
Possible fix for large sockets messages.
|
changeset |
files
|
Wed, 24 Apr 2024 20:44:56 +0200 |
Michiel Broek |
Version 0.9.19a4
|
changeset |
files
|
Wed, 24 Apr 2024 20:36:06 +0200 |
Michiel Broek |
Finished save fermenter uit edit.
|
changeset |
files
|
Wed, 24 Apr 2024 16:46:45 +0200 |
Michiel Broek |
Fermenter editor layout is ready. Load record done. Add and Delete a new fermenter is done.
|
changeset |
files
|
Wed, 24 Apr 2024 11:04:00 +0200 |
Michiel Broek |
Drop fermenter volume setting.
|
changeset |
files
|
Tue, 23 Apr 2024 20:45:29 +0200 |
Michiel Broek |
Device Save implemented.
|
changeset |
files
|
Tue, 23 Apr 2024 19:50:05 +0200 |
Michiel Broek |
Added device delete
|
changeset |
files
|
Tue, 23 Apr 2024 16:52:13 +0200 |
Michiel Broek |
Added Add new device.
|
changeset |
files
|
Tue, 23 Apr 2024 13:06:33 +0200 |
Michiel Broek |
Finished global setup including Save.
|
changeset |
files
|
Mon, 22 Apr 2024 20:58:55 +0200 |
Michiel Broek |
The global settings screen added. No Save function yet.
|
changeset |
files
|
Mon, 22 Apr 2024 15:12:27 +0200 |
Michiel Broek |
Added web page to display the one-wire bus live status.
|
changeset |
files
|
Mon, 22 Apr 2024 13:50:23 +0200 |
Michiel Broek |
Final 0.9.19a3 change.
|
changeset |
files
|
Mon, 22 Apr 2024 13:40:21 +0200 |
Michiel Broek |
Version 0.9.19a3. Fixed segfault in onewire temperature measurement. Fixed json error in onewire device.
|
changeset |
files
|
Mon, 22 Apr 2024 11:33:04 +0200 |
Michiel Broek |
Version 0.9.19a2. Dropped TEMPSTATE[] and only use DEVPRESENT[] to mark devices state. Adjusted webpages for this switch in responses. Adjusted MySQL mon_fermenters enum values too. Rename some global Config records to better reflect their real use.Added one-wire json records and websocket. Announce when some onewire device changes. Add UNITS JSON command without parameter. Dropped global tempFormat setting that was never used.
|
changeset |
files
|
Sat, 20 Apr 2024 11:48:20 +0200 |
Michiel Broek |
Fixed two compiler warnings on arm platform
|
changeset |
files
|
Sat, 20 Apr 2024 11:34:00 +0200 |
Michiel Broek |
Version 0.9.19a1
|
changeset |
files
|
Sat, 20 Apr 2024 10:53:18 +0200 |
Michiel Broek |
Better handling of a removed DS18B20 temperature sensor.
|
changeset |
files
|
Fri, 19 Apr 2024 20:56:55 +0200 |
Michiel Broek |
Create global_json() for all and expanded the data to the complete setup. Added design for the global setup.
|
changeset |
files
|
Fri, 19 Apr 2024 14:11:19 +0200 |
Michiel Broek |
More copyright references.
|
changeset |
files
|
Fri, 19 Apr 2024 11:31:46 +0200 |
Michiel Broek |
Devices edit popup layout ready.
|
changeset |
files
|
Thu, 18 Apr 2024 17:17:22 +0200 |
Michiel Broek |
More work for devices list and editor.
|
changeset |
files
|
Thu, 18 Apr 2024 14:20:19 +0200 |
Michiel Broek |
Devices list grid added.
|
changeset |
files
|
Wed, 17 Apr 2024 19:54:56 +0200 |
Michiel Broek |
Updated dependencies. Devices json data is created in de devices source for all places where it is needed. Added devices_ws function to broadcast all devices, to be used when any device is changed. The devices loop detects changes in input values and calls devices_ws if so. The server uses the general devices json data.
|
changeset |
files
|
Wed, 17 Apr 2024 15:03:01 +0200 |
Michiel Broek |
Fixed fermenter switches in NONE mode. Som other small bugfixes.
|
changeset |
files
|
Wed, 17 Apr 2024 13:18:22 +0200 |
Michiel Broek |
Websocket ping/pong uses sequence numbers.
|
changeset |
files
|
Tue, 16 Apr 2024 16:20:34 +0200 |
Michiel Broek |
Minor details for server DEVICE commands. Added getdevice<s> php scripts.
|
changeset |
files
|
Tue, 16 Apr 2024 16:03:47 +0200 |
Michiel Broek |
Increased server buffersize from 1024 to 4096. Added DEVICE JSON <uuid> command. Added websocket response fermenter profile. The fermenter monitor screen is ready (maybe).
|
changeset |
files
|
Mon, 15 Apr 2024 17:06:15 +0200 |
Michiel Broek |
Added getglobal.php script
|
changeset |
files
|
Mon, 15 Apr 2024 17:04:57 +0200 |
Michiel Broek |
Better websocket broadcast messages. Added GLOBAL JSON command to the server. Better logic to trigger websocket and mqtt data updates for the fermenter units. Websocket receive added fermenter mode, stage, setpoints, switches. Added more css styles for the fermenter screen. Added the fermenter screen php and javascript.
|
changeset |
files
|
Sun, 14 Apr 2024 14:41:38 +0200 |
Michiel Broek |
Server json unit data list added
|
changeset |
files
|
Sun, 14 Apr 2024 12:46:02 +0200 |
Michiel Broek |
Add stylesheet, about page. Add menu for fermenters. Add websocket port setup to the config server.
|
changeset |
files
|
Sat, 13 Apr 2024 16:50:26 +0200 |
Michiel Broek |
Added websockets to thermferm. Started new www directory for websocket enabled web. The init script now waits until thermferm is completely stopped.
|
changeset |
files
|
Thu, 11 Apr 2024 15:58:49 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Thu, 11 Apr 2024 15:01:46 +0200 |
Michiel Broek |
Version 0.9.18
|
changeset |
files
|
Thu, 11 Apr 2024 14:57:32 +0200 |
Michiel Broek |
Only log temperature error once. Only log temperature Ok again once. Do not log changed temperature.
|
changeset |
files
|
Thu, 11 Apr 2024 13:18:20 +0200 |
Michiel Broek |
Finished one-wire ds2413 output
|
changeset |
files
|
Thu, 11 Apr 2024 11:19:04 +0200 |
Michiel Broek |
Stop logging ghost one-wire devices.
|
changeset |
files
|
Mon, 08 Apr 2024 13:16:42 +0200 |
Michiel Broek |
Reboot from the panel is now restart application. The restart is working again, also via bmsapp.
|
changeset |
files
|
Mon, 08 Apr 2024 11:23:45 +0200 |
Michiel Broek |
Upgraded MIGRATION document.
|
changeset |
files
|
Mon, 08 Apr 2024 10:57:12 +0200 |
Michiel Broek |
Removed lcd-buffer create logmessage. Combined Keys and Delay states.
|
changeset |
files
|
Sun, 07 Apr 2024 20:26:37 +0200 |
Michiel Broek |
Added commandline switch --foreground, the --debug now only activates extra debug logging. No more console output. The thermferm process uses a state table, this makes the code more readable and have less large functions.
|
changeset |
files
|
Sun, 07 Apr 2024 16:05:06 +0200 |
Michiel Broek |
Fermentation processing in it's own function.
|
changeset |
files
|
Sun, 07 Apr 2024 11:25:00 +0200 |
Michiel Broek |
Version 0.9.17a3. Prepare for thermferm state tables.
|
changeset |
files
|
Sat, 06 Apr 2024 17:21:29 +0200 |
Michiel Broek |
Updated MIGRATION document.
|
changeset |
files
|
Fri, 05 Apr 2024 20:10:26 +0200 |
Michiel Broek |
One-wire tread more relaxed logging.
|
changeset |
files
|
Fri, 05 Apr 2024 19:30:41 +0200 |
Michiel Broek |
Version 0.9.17a2. Disabled a lot of mutex locks, some are blocking and need to be fixed. This version seems to be working, more or less.
|
changeset |
files
|
Fri, 05 Apr 2024 16:19:39 +0200 |
Michiel Broek |
Version 0.9.17a1. Revised starting and stopping the threads. Fixed stopping the command server thread. Moved one-wire tempeature sensors resolution correction to the one-wire thread. The devices thread fetches temperatures from the one-wire thread. The one-wire thread does everything for the temperature sensors. The command server uses private sockets. Still, only one session at the same time is handled.
|
changeset |
files
|
Wed, 03 Apr 2024 19:33:38 +0200 |
Michiel Broek |
Added state to scan vanished one-wire devices. Update devices if a one-wire device returns on the bus.
|
changeset |
files
|
Wed, 03 Apr 2024 16:53:22 +0200 |
Michiel Broek |
Fix for compile with wiringPi
|
changeset |
files
|
Wed, 03 Apr 2024 16:21:46 +0200 |
Michiel Broek |
Read ds2413 moved to one-wire thread. Only reprogram if it is an input and programmed as output.
|
changeset |
files
|
Wed, 03 Apr 2024 12:14:45 +0200 |
Michiel Broek |
One-wire thread is now the first to start. The devices_detect() function now uses the detected one-wire linked list instead of scan the sysfs. Base code for ds2413 added in the state table, needs rework.
|
changeset |
files
|
Tue, 02 Apr 2024 15:29:16 +0200 |
Michiel Broek |
State machine logging only when debug is active.
|
changeset |
files
|
Tue, 02 Apr 2024 15:03:12 +0200 |
Michiel Broek |
Added one-wire thread and some old state table macro's. The state machine first state scans new one-wire devices and stores them in a linked list.
|
changeset |
files
|
Wed, 27 Mar 2024 18:59:39 +0100 |
Michiel Broek |
Version 0.9.17
|
changeset |
files
|
Wed, 27 Mar 2024 17:19:46 +0100 |
Michiel Broek |
Moved all delay functions into a new general file.
|
changeset |
files
|
Wed, 27 Mar 2024 15:49:31 +0100 |
Michiel Broek |
Log compile options on startup.
|
changeset |
files
|
Mon, 25 Mar 2024 17:14:56 +0100 |
Michiel Broek |
Brought the retry attempts to read the DHT11 sensors to the main devices loop. The actual read function is now very simple. Called every 30 seconds when all is well, or 2 seconds if something is wrong.
|
changeset |
files
|
Mon, 25 Mar 2024 11:44:45 +0100 |
Michiel Broek |
Version 0.9.16. Final changes DHT11 reading via sysfs.
|
changeset |
files
|
Sun, 24 Mar 2024 17:12:23 +0100 |
Michiel Broek |
Better detection of the DHT11 sensors. Read DHT11 with errors detection and reapeated tries.
|
changeset |
files
|
Sat, 23 Mar 2024 20:28:17 +0100 |
Michiel Broek |
Work to move dht userspace code to kernel module.
|
changeset |
files
|
Sat, 23 Mar 2024 16:01:24 +0100 |
Michiel Broek |
Running threads and locking doesn't depend on wiringPi anymore.
|
changeset |
files
|
Sat, 23 Mar 2024 12:18:14 +0100 |
Michiel Broek |
All thread locks from wiringPi to standard pthreads.
|
changeset |
files
|
Sat, 23 Mar 2024 09:31:01 +0100 |
Michiel Broek |
Added MIGRATION document. Trying to drop usleep() call to replace by nanosleep(). Some code cleanup.
|
changeset |
files
|
Fri, 22 Mar 2024 11:48:35 +0100 |
Michiel Broek |
Updates for DHT11 reading
|
changeset |
files
|
Sat, 16 Mar 2024 11:54:46 +0100 |
Michiel Broek |
Impoved SDL configure checks
|
changeset |
files
|
Sat, 16 Mar 2024 11:09:43 +0100 |
Michiel Broek |
Version 0.9.15
|
changeset |
files
|
Sat, 16 Mar 2024 11:08:27 +0100 |
Michiel Broek |
Renamed initscript
|
changeset |
files
|
Sat, 16 Mar 2024 11:06:16 +0100 |
Michiel Broek |
Init system for Slackware only
|
changeset |
files
|
Sat, 16 Mar 2024 10:51:41 +0100 |
Michiel Broek |
Final rebuild brewpanel to SDL2
|
changeset |
files
|
Fri, 15 Mar 2024 20:57:49 +0100 |
Michiel Broek |
Add --enable-wiringpi to configure script to allow to disable wiringpi even when it is installed. Use SDL2 instead of partly old SDL.
|
changeset |
files
|
Thu, 14 Mar 2024 19:37:53 +0100 |
Michiel Broek |
Create installation directories
|
changeset |
files
|
Thu, 14 Mar 2024 19:32:37 +0100 |
Michiel Broek |
Create installation directories
|
changeset |
files
|
Thu, 14 Mar 2024 17:10:14 +0100 |
Michiel Broek |
Version 0.9.14
|
changeset |
files
|
Thu, 14 Mar 2024 17:07:09 +0100 |
Michiel Broek |
Add DESTDIR installation target. Some kicad update again. Moved init script to /etc/rc.d
|
changeset |
files
|
Sat, 25 Feb 2023 10:53:42 +0100 |
Michiel Broek |
Version 0.9.13. Close socket after use, fixes too much files open.
|
changeset |
files
|
Mon, 13 Feb 2023 16:39:03 +0100 |
Michiel Broek |
Version 0.9.12
|
changeset |
files
|
Mon, 13 Feb 2023 16:30:58 +0100 |
Michiel Broek |
Final changes for current wifi parameters.
|
changeset |
files
|
Mon, 13 Feb 2023 15:22:43 +0100 |
Chiel Broek |
Updates for cabled networks
|
changeset |
files
|
Mon, 13 Feb 2023 15:11:20 +0100 |
Michiel Broek |
Design wifi parameter reporting
|
changeset |
files
|
Sat, 01 Oct 2022 16:16:36 +0200 |
Michiel Broek |
Upgraded drawing to kicad 6.0.8
|
changeset |
files
|
Mon, 26 Sep 2022 21:30:17 +0200 |
Michiel Broek |
Upgraded kicad to version 6
|
changeset |
files
|
Tue, 09 Aug 2022 15:08:17 +0200 |
Michiel Broek |
Final changes in the css.
|
changeset |
files
|
Tue, 09 Aug 2022 14:53:57 +0200 |
Michiel Broek |
Updated css for webcam-ng
|
changeset |
files
|
Tue, 09 Aug 2022 13:53:52 +0200 |
Michiel Broek |
Added favicon.ico
|
changeset |
files
|
Mon, 08 Aug 2022 19:39:37 +0200 |
Michiel Broek |
Merged again
|
changeset |
files
|
Mon, 08 Aug 2022 11:51:59 +0200 |
Michiel Broek |
Improved conditional styling
|
changeset |
files
|
Mon, 08 Aug 2022 11:49:57 +0200 |
Michiel Broek |
Improved conditional styling
|
changeset |
files
|
Mon, 08 Aug 2022 19:37:49 +0200 |
Michiel Broek |
Merged
|
changeset |
files
|
Mon, 08 Aug 2022 17:04:15 +0200 |
Michiel Broek |
Added nextgen webcam scripts.
|
changeset |
files
|
Mon, 08 Aug 2022 10:54:27 +0200 |
Michiel Broek |
Upgraded jqwidgets
|
changeset |
files
|
Sun, 10 Jul 2022 16:58:40 +0200 |
Michiel Broek |
Always send network information, our IP may be changed.
|
changeset |
files
|
Sun, 10 Jul 2022 15:03:26 +0200 |
Michiel Broek |
Fixed init problems.
|
changeset |
files
|
Sun, 10 Jul 2022 14:33:13 +0200 |
Michiel Broek |
Version 0.9.11. Removed lcd debug message after 7 years. Added setup for alternative beer sensor. If the main sensor is gone, the alternative will be used.
|
changeset |
files
|
Fri, 28 May 2021 14:25:56 +0200 |
Michiel Broek |
Added kicad drawings
|
changeset |
files
|
Thu, 13 May 2021 13:49:04 +0200 |
Michiel Broek |
Make sure the hostname doesn't contain the domain name. Added Slackare init and setup scripts.
|
changeset |
files
|
Wed, 12 May 2021 21:17:59 +0200 |
Michiel Broek |
Improved logging if wiringpi failed.
|
changeset |
files
|
Sun, 27 Sep 2020 17:08:27 +0200 |
Michiel Broek |
Implemented MQTT user/password auth.
|
changeset |
files
|
Sat, 12 Sep 2020 16:50:35 +0200 |
Michiel Broek |
Version 0.9.10.
|
changeset |
files
|
Sat, 12 Sep 2020 15:23:49 +0200 |
Michiel Broek |
Changed pub_domoticz mqtt publishing.
|
changeset |
files
|
Sat, 27 Jun 2020 19:28:10 +0200 |
Michiel Broek |
Better logging for locking the daemon and fixed stale lock recovery.
|
changeset |
files
|
Mon, 18 May 2020 11:03:40 +0200 |
Michiel Broek |
Version 0.9.9 Don't flag fermenter death if the unit is turned off. Fix a wrong log message. Send unit data even if the unit is turned off.
|
changeset |
files
|
Sat, 25 Apr 2020 20:31:31 +0200 |
Michiel Broek |
Version 0.9.8. Added extra path to the fonts for Debian buster. Changed the PID to work on Proportional on Measurement. Added loops so that it looks like the PID is running at 100 mSec intervals.
|
changeset |
files
|
Mon, 04 Nov 2019 13:19:27 +0100 |
Michiel Broek |
Version 0.9.7. Increased the maximum fermentation temperature to 45 degrees to allow Kveik fermentations.
|
changeset |
files
|
Sun, 07 Jul 2019 14:31:10 +0200 |
Michiel Broek |
Merged fix from default
stable
|
changeset |
files
|
Sun, 07 Jul 2019 14:28:37 +0200 |
Chiel Broek |
Fix for non Pi hardware and virtual Pi's.
|
changeset |
files
|
Sun, 07 Jul 2019 13:55:03 +0200 |
Michiel Broek |
Merged with default
stable
|
changeset |
files
|
Sun, 07 Jul 2019 13:54:24 +0200 |
Michiel Broek |
Version 0.9.6
|
changeset |
files
|
Sun, 07 Jul 2019 13:04:16 +0200 |
Michiel Broek |
Fix one byte too large buffer copy
|
changeset |
files
|
Sun, 07 Jul 2019 12:58:06 +0200 |
Michiel Broek |
Added wiringPi hardware detection code.
|
changeset |
files
|
Thu, 09 May 2019 19:50:26 +0200 |
Michiel Broek |
Less debug messages on stdout
|
changeset |
files
|
Thu, 09 May 2019 19:42:33 +0200 |
Michiel Broek |
Revoved old temperature sensors read errors workaround.
|
changeset |
files
|
Thu, 09 May 2019 17:20:58 +0200 |
Michiel Broek |
Removed simulator debug support
|
changeset |
files
|
Thu, 09 May 2019 17:16:49 +0200 |
Michiel Broek |
Code cleanup and removed a debug message
|
changeset |
files
|
Thu, 09 May 2019 17:10:54 +0200 |
Michiel Broek |
Removed Graph button from the status screen.
|
changeset |
files
|
Thu, 09 May 2019 17:01:56 +0200 |
Michiel Broek |
Removed ARCHIVER commands and web pages.
|
changeset |
files
|
Thu, 09 May 2019 16:40:17 +0200 |
Michiel Broek |
Removed writing local unit data logs
|
changeset |
files
|
Thu, 09 May 2019 15:17:30 +0200 |
Michiel Broek |
Created stable branch
stable
|
changeset |
files
|
Sun, 28 Apr 2019 19:59:43 +0200 |
Michiel Broek |
Final device thermometer error detection.
|
changeset |
files
|
Sun, 28 Apr 2019 17:03:45 +0200 |
Michiel Broek |
Added sensor precision initialize. Changed PID logging.
|
changeset |
files
|
Sun, 28 Apr 2019 16:27:54 +0200 |
Michiel Broek |
Experimental 12 bits resolution init
|
changeset |
files
|
Sun, 28 Apr 2019 11:38:30 +0200 |
Michiel Broek |
Changed 1-wire DS18B20 sensor error check.
|
changeset |
files
|
Sat, 27 Apr 2019 21:07:00 +0200 |
Michiel Broek |
More relaxed DHT11 readings
|
changeset |
files
|
Sat, 27 Apr 2019 20:54:20 +0200 |
Michiel Broek |
Removed not working extra check
|
changeset |
files
|
Sat, 27 Apr 2019 20:47:26 +0200 |
Michiel Broek |
Attempt to better check the temperature sensors and lower the cpu load.
|
changeset |
files
|
Sat, 27 Apr 2019 15:36:16 +0200 |
Chiel Broek |
Version 0.9.5, interior lights are now only controlled by the open door or a 5 minutes timer. The timer is started via an MQTT command. The BMS web application sends this command just before a webcam page is requested.
|
changeset |
files
|
Sun, 31 Mar 2019 13:57:25 +0200 |
Michiel Broek |
Added webcam files.
|
changeset |
files
|
Wed, 27 Feb 2019 22:21:20 +0100 |
Michiel Broek |
Version 0.9.4 Handle yeast temperature limits per fermenter.
|
changeset |
files
|
Wed, 27 Feb 2019 17:38:06 +0100 |
Michiel Broek |
Concept for yeast limits settings.
|
changeset |
files
|
Thu, 07 Feb 2019 14:59:47 +0100 |
Michiel Broek |
Version 0.9.3. Splitted the temperature low and high settings in fridge and beer mode.
|
changeset |
files
|
Mon, 21 Jan 2019 17:11:50 +0100 |
Michiel Broek |
DLOG messages are no longer retained.
|
changeset |
files
|
Sun, 20 Jan 2019 14:08:43 +0100 |
Michiel Broek |
Events are in the flat file log too
|
changeset |
files
|
Sun, 20 Jan 2019 13:34:09 +0100 |
Michiel Broek |
Version 0.9.2 DLOG messages every minute unless a unit is off. More event messages added. The target temperatur is now taken from the PIDs.
|
changeset |
files
|
Sat, 19 Jan 2019 22:07:42 +0100 |
Michiel Broek |
Removed some debug code
|
changeset |
files
|
Sat, 19 Jan 2019 20:31:50 +0100 |
Michiel Broek |
Fix for compiling with wiringPi
|
changeset |
files
|
Sat, 19 Jan 2019 20:12:56 +0100 |
Michiel Broek |
Send MQTT messages with temperature values also when the fermenter is off.
|
changeset |
files
|
Sat, 19 Jan 2019 11:38:09 +0100 |
Michiel Broek |
Version 0.9.1. Added fermentation profiles via MQTT. Added uuid field for loaded product. Removed some debug messages in the simulator. Removed dead code and debug messages from the lcd driver.
|
changeset |
files
|
Mon, 14 Jan 2019 22:46:27 +0100 |
Michiel Broek |
Removed useless version marks from the xml configuration. Added DCMD profile configuration to install and delete profiles in a fermenter. Removed the old profiles configuration. Removed useless xml configuration error check because none has been triggered in five years, Removed several obsolete upgrade functions. Updated the web liveview.
|
changeset |
files
|
Thu, 10 Jan 2019 16:33:42 +0100 |
Michiel Broek |
Version 0.9.0. Implemented DCMD via mqtt to set stage, mode, setpoint low and high. Implemeted DCMD via mqtt to set heater, cooler, fan and light state. Implemented DCMD via mqtt to set product code and name. Set the PID's in fridge mode without idle range offset, that was an old leftover setting that was obsolete.
|
changeset |
files
|
Mon, 07 Jan 2019 13:23:17 +0100 |
Michiel Broek |
Switched export server to https
|
changeset |
files
|
Fri, 24 Aug 2018 15:43:32 +0200 |
Michiel Broek |
Versie 0.8.9
|
changeset |
files
|
Fri, 24 Aug 2018 14:14:31 +0200 |
Michiel Broek |
Added Carbonation stage.
|
changeset |
files
|
Mon, 06 Aug 2018 17:04:57 +0200 |
Michiel Broek |
Fix not generating a valid system uuid
|
changeset |
files
|
Sat, 04 Aug 2018 16:29:12 +0200 |
Michiel Broek |
Versie 0.8.8 Fermentation stage implemented in units.
|
changeset |
files
|
Fri, 03 Aug 2018 21:58:30 +0200 |
Michiel Broek |
On Raspberry with WiringPi better hardware info is sent with NBIRTH
|
changeset |
files
|
Fri, 03 Aug 2018 16:56:55 +0200 |
Chiel Broek |
Fix for deprecated warnings
|
changeset |
files
|
Fri, 03 Aug 2018 16:13:17 +0200 |
Michiel Broek |
Versie 0.8.7. Fixed a lot of memory leaks with the aid of valgrind.
|
changeset |
files
|
Thu, 02 Aug 2018 13:39:30 +0200 |
Chiel Broek |
Forced mosquitto before thermferm
|
changeset |
files
|
Thu, 02 Aug 2018 13:19:38 +0200 |
Chiel Broek |
Improved Debian installation
|
changeset |
files
|
Thu, 02 Aug 2018 13:12:50 +0200 |
Michiel Broek |
Update init script and installation
|
changeset |
files
|
Thu, 02 Aug 2018 12:20:06 +0200 |
Michiel Broek |
Versie 0.8.6 De mosquitto library is geen optie meer maar verplicht.
|
changeset |
files
|
Wed, 01 Aug 2018 22:27:58 +0200 |
Michiel Broek |
Fixed compile for LCD display
|
changeset |
files
|
Tue, 31 Jul 2018 23:04:35 +0200 |
Michiel Broek |
Add fermenter uuid to the DLOG message
|
changeset |
files
|
Tue, 31 Jul 2018 16:42:11 +0200 |
Michiel Broek |
Versie 0.8.5. Implementatie product code en product naam. Implementatie DLOG MQTT berichten. Verminderde server rotocol debug berichten.
|
changeset |
files
|
Wed, 25 Jul 2018 20:08:13 +0200 |
Michiel Broek |
Updated simulator with more simulated devices.
|
changeset |
files
|
Wed, 25 Jul 2018 14:18:39 +0200 |
Chiel Broek |
Add INSTALL file. Less simulator logging.
|
changeset |
files
|
Wed, 25 Jul 2018 12:24:17 +0200 |
Michiel Broek |
Versie 0.8.4. Init script toegevoegd inclusief make install.
|
changeset |
files
|
Mon, 23 Jul 2018 14:41:21 +0200 |
Michiel Broek |
Versie 0.8.3. Enkele debug console berichten verwijderd. De MQTT NCMD reboot en rebirth commando's geimplementeerd.
|
changeset |
files
|
Sat, 21 Jul 2018 20:40:02 +0200 |
Michiel Broek |
Versie 0.8.2. Node NBIRTH payload heeft nu netwerk informatie.
|
changeset |
files
|
Fri, 20 Jul 2018 21:37:45 +0200 |
Michiel Broek |
Versie 0.8.1. Geen DDATA als fermenter uit staat. Profile JSON formaat is nu werkend.
|
changeset |
files
|
Thu, 19 Jul 2018 14:08:32 +0200 |
Michiel Broek |
Versie 0.8.0. Fixed eerste DBIRTH fout geinitialiseerde waardes.
|
changeset |
files
|
Thu, 19 Jul 2018 12:55:40 +0200 |
Michiel Broek |
Changed alarm message and mqtt message order
|
changeset |
files
|
Thu, 19 Jul 2018 12:47:52 +0200 |
Michiel Broek |
Fixed compiling whithout mqtt support.
|
changeset |
files
|
Wed, 18 Jul 2018 13:26:37 +0200 |
Michiel Broek |
Versie 0.6.8. Code cleanup. Publish NDATA MQTT bericht iedere 5 minuten of als er een THB wijziging is.
|
changeset |
files
|
Tue, 17 Jul 2018 19:56:58 +0200 |
Michiel Broek |
Removed NBIRTH/NDATA nodecontrol message.
|
changeset |
files
|
Tue, 17 Jul 2018 11:50:25 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Mon, 16 Jul 2018 21:56:24 +0200 |
Michiel Broek |
Fixed spelling error
|
changeset |
files
|
Mon, 16 Jul 2018 17:23:22 +0200 |
Michiel Broek |
Versie 0.6.7. Globale uuid toegevoegd voor de NBIRTH payload.
|
changeset |
files
|
Mon, 16 Jul 2018 11:41:46 +0200 |
Michiel Broek |
Changed opacity of heater and cooler lines
|
changeset |
files
|
Sun, 15 Jul 2018 14:39:07 +0200 |
Michiel Broek |
Versie 0.6.6. Subprojecten mash, rc433 en dht11 verwijderd.
|
changeset |
files
|
Sun, 15 Jul 2018 14:08:19 +0200 |
Michiel Broek |
Style fixes for the log chart. Removed png export button that doesn't work anymore.
|
changeset |
files
|
Sun, 15 Jul 2018 12:05:16 +0200 |
Michiel Broek |
Versie 0.6.5. LIST LOG <unit> commando verwijderd, alleen ARCHIVE LOG <unit> is nog in gebruik. De chiller temperatuur zit nu ook in de log en grafiek.
|
changeset |
files
|
Sat, 14 Jul 2018 21:36:08 +0200 |
Michiel Broek |
Een kleine correctie
|
changeset |
files
|
Sat, 14 Jul 2018 21:15:20 +0200 |
Michiel Broek |
Versie 0.6.4. Aan de global setup de MQTT instellingen toegevoegd. Die zijn er ook als MQTT niet op het systeem aanwezig is. Indien het de global setup wijzigd, wordt de MQTT verbinding opnieuw gemaakt.
|
changeset |
files
|
Sat, 14 Jul 2018 17:21:25 +0200 |
Michiel Broek |
Versie 0.6.3. MQTT device berichten alleen als een fermenter ingeschakeld is. MQTT fermenter birth en death berichhten als een fementer in of uitgeschakeld wordt. MQTT node death bericht bij normaal afsluiten van de daemon. Alle MQTT persistent berichten worden nu goed opgeruikmd.
|
changeset |
files
|
Fri, 18 Aug 2017 17:45:14 +0200 |
Michiel Broek |
Lights always on
|
changeset |
files
|
Thu, 10 Aug 2017 20:32:50 +0200 |
Michiel Broek |
Fan off during cooling
|
changeset |
files
|
Thu, 10 Aug 2017 16:27:54 +0200 |
Michiel Broek |
Serious alarms are above 255
|
changeset |
files
|
Fri, 28 Jul 2017 13:28:11 +0200 |
Michiel Broek |
Added alarm LED
|
changeset |
files
|
Tue, 25 Jul 2017 21:08:26 +0200 |
Michiel Broek |
Changed 1-wire logic a little bit
|
changeset |
files
|
Tue, 25 Jul 2017 17:39:42 +0200 |
Michiel Broek |
Debug CRC error messages
|
changeset |
files
|
Tue, 25 Jul 2017 13:16:49 +0200 |
Michiel Broek |
Chiller alarm and cutoff now against the air temperature.
|
changeset |
files
|
Tue, 25 Jul 2017 11:43:35 +0200 |
Michiel Broek |
Added unit alarm flag
|
changeset |
files
|
Mon, 24 Jul 2017 22:55:28 +0200 |
Michiel Broek |
Changed extreme PID control from 5to 8 degrees.
|
changeset |
files
|
Sun, 23 Jul 2017 12:12:58 +0200 |
Michiel Broek |
Thermometers styling
|
changeset |
files
|
Sat, 22 Jul 2017 23:34:50 +0200 |
Michiel Broek |
Liveview completed the chiller thermometer.
|
changeset |
files
|
Sat, 22 Jul 2017 23:04:44 +0200 |
Michiel Broek |
Design live view page
|
changeset |
files
|
Thu, 06 Jul 2017 22:31:01 +0200 |
Michiel Broek |
Fix storing beer_idx value
|
changeset |
files
|
Mon, 26 Jun 2017 19:27:21 +0200 |
Michiel Broek |
Version 0.6.2 released.
|
changeset |
files
|
Mon, 26 Jun 2017 19:21:07 +0200 |
Michiel Broek |
Added chiller configuration items
|
changeset |
files
|
Mon, 26 Jun 2017 13:58:11 +0200 |
Michiel Broek |
Changed livescreen, now displays thermometers. The chart is loaded on request. This speeds up loading the application.
|
changeset |
files
|
Sun, 25 Jun 2017 13:02:06 +0200 |
Michiel Broek |
Don't continuous send data to domoticz
|
changeset |
files
|
Sat, 10 Jun 2017 23:43:56 +0200 |
Michiel Broek |
Only send domoticz changed values
|
changeset |
files
|
Sat, 10 Jun 2017 13:00:14 +0200 |
Michiel Broek |
Changed state messages to domoticz
|
changeset |
files
|
Wed, 07 Jun 2017 23:06:47 +0200 |
Michiel Broek |
Version 0.6.1 added support for domoticz mqtt sensors.
|
changeset |
files
|
Wed, 31 May 2017 16:29:52 +0200 |
Michiel Broek |
Small web page changes
|
changeset |
files
|
Sun, 28 May 2017 14:19:57 +0200 |
Michiel Broek |
Upgraded jqwidgets to version 4.5.2
|
changeset |
files
|
Fri, 19 May 2017 16:34:21 +0200 |
Michiel Broek |
Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
|
changeset |
files
|
Mon, 08 May 2017 20:54:51 +0200 |
Michiel Broek |
Turn off MQTT debug
|
changeset |
files
|
Mon, 08 May 2017 17:03:25 +0200 |
Michiel Broek |
Add Raspberry support in MQTT init message
|
changeset |
files
|
Mon, 08 May 2017 16:32:43 +0200 |
Michiel Broek |
Extra shutdown delay
|
changeset |
files
|
Mon, 08 May 2017 16:26:02 +0200 |
Michiel Broek |
New MQTT protocol
|
changeset |
files
|
Sat, 29 Apr 2017 17:47:00 +0200 |
Michiel Broek |
Small fix
|
changeset |
files
|
Sat, 29 Apr 2017 17:07:36 +0200 |
Michiel Broek |
Added some MQTT publish clear functions. Version 0.5.8
|
changeset |
files
|
Thu, 12 May 2016 21:43:07 +0200 |
Michiel Broek |
Better door and 12 volt detection and logging
|
changeset |
files
|
Wed, 11 May 2016 14:47:27 +0200 |
Michiel Broek |
Fixed some MQTT messages. Added more profile MQTT messages. Version 0.5.7
|
changeset |
files
|
Mon, 09 May 2016 21:37:25 +0200 |
Michiel Broek |
Bumped to version 0.5.6
|
changeset |
files
|
Mon, 09 May 2016 21:35:55 +0200 |
Michiel Broek |
Units now have an unique alias name so that the MQTT messages are more friendly.
|
changeset |
files
|
Mon, 02 May 2016 16:15:37 +0200 |
Michiel Broek |
Created mqtt sourcefiles. Use flags to trigger publish messages. The main source does not know and does not care if MQTT messages will be sent. Version 0.5.5
|
changeset |
files
|
Sat, 30 Apr 2016 21:25:10 +0200 |
Michiel Broek |
Fixed empty setpoint values
|
changeset |
files
|
Sat, 30 Apr 2016 21:06:20 +0200 |
Michiel Broek |
Compiles mosquitto code if library is found on the system. Bumped to version 0.5.4
|
changeset |
files
|
Sat, 26 Mar 2016 14:43:31 +0100 |
Michiel Broek |
The FAN always runs if the unit is active. Bumped tp version 0.5.3
|
changeset |
files
|
Thu, 17 Mar 2016 23:28:29 +0100 |
Michiel Broek |
Code cleanup.
|
changeset |
files
|
Thu, 17 Mar 2016 17:25:02 +0100 |
Michiel Broek |
Fix Deadlok problem when there is only a heater or a cooler.
|
changeset |
files
|
Thu, 17 Mar 2016 17:10:41 +0100 |
Michiel Broek |
Fixed server log when changed PID parameters from the web interface.
|
changeset |
files
|
Fri, 11 Mar 2016 20:27:02 +0100 |
Michiel Broek |
Changed PID code. PID parameters are now stored 3 digits instead of 2 behind the decimal point. Prevent extreme heating or cooling in Beer mode. Heat and Cool lockdown now allows the lagest value to win instead of zero them both. PID output treshold from 2% to 50%.
|
changeset |
files
|
Sat, 05 Mar 2016 12:50:23 +0100 |
Michiel Broek |
Switched PID to BOO mode for all modes.
|
changeset |
files
|
Fri, 26 Feb 2016 15:14:00 +0100 |
Michiel Broek |
Remove temporary marker.
|
changeset |
files
|
Fri, 26 Feb 2016 13:38:44 +0100 |
Michiel Broek |
Swapped heat/cool symbols.
|
changeset |
files
|
Thu, 25 Feb 2016 23:24:50 +0100 |
Michiel Broek |
Small brewpanel display error fix, did not affect real hardware.
|
changeset |
files
|
Thu, 25 Feb 2016 23:14:46 +0100 |
Michiel Broek |
Bumped to version 0.5.2 and removed the brewco subdirectory because that has been implemented as Arduino project.
|
changeset |
files
|
Thu, 25 Feb 2016 22:42:54 +0100 |
Michiel Broek |
Compacted LCD display for units, allways 4 instead of 4 to 6 lines. But it's a bit more cryptic. We could write a short manual.
|
changeset |
files
|
Thu, 25 Feb 2016 20:26:40 +0100 |
Michiel Broek |
Fixed compiler warning
|
changeset |
files
|
Thu, 25 Feb 2016 20:12:27 +0100 |
Michiel Broek |
Use user defined characters for the LCD display just like in Arduino projects.
|
changeset |
files
|
Mon, 22 Feb 2016 19:24:49 +0100 |
Michiel Broek |
Merge
|
changeset |
files
|
Mon, 22 Feb 2016 19:22:39 +0100 |
Michiel Broek |
Simulate sensors resolution.
|
changeset |
files
|
Thu, 31 Dec 2015 21:03:52 +0100 |
Michiel Broek |
Less PID debug logging.
|
changeset |
files
|
Thu, 31 Dec 2015 20:52:28 +0100 |
Michiel Broek |
Fixed compiling on real Pi's
|
changeset |
files
|
Sun, 27 Dec 2015 20:52:52 +0100 |
Michiel Broek |
Bild target temperature 0.1 degree higher. Removed debug log from the simulator
|
changeset |
files
|
Sun, 27 Dec 2015 20:21:06 +0100 |
Michiel Broek |
The simulator now simulates the heater power in Watts. Changed Mash Remove? prompt.
|
changeset |
files
|
Sun, 27 Dec 2015 17:52:26 +0100 |
Michiel Broek |
Renamed Mash-in step to Prepare on the display. Don't run the pump when the mash is added. When preparing the mash, first heat the HLT, and then the MLT so that both have the chance to reach their target temperatures.
|
changeset |
files
|
Sun, 27 Dec 2015 17:18:58 +0100 |
Michiel Broek |
Moved mash added question to after mash rest mash-in step.
|
changeset |
files
|
Sun, 27 Dec 2015 16:09:44 +0100 |
Michiel Broek |
Updated several prompts. Added pump prime. Added first part of a test plan.
|
changeset |
files
|
Sat, 26 Dec 2015 23:35:42 +0100 |
Michiel Broek |
Improved steps logging. Some small fixes in the brew automation.
|
changeset |
files
|
Sat, 26 Dec 2015 21:45:44 +0100 |
Michiel Broek |
The brew state machine is complete, works but is not bugfree
|
changeset |
files
|
Tue, 22 Dec 2015 21:07:14 +0100 |
Michiel Broek |
Added initial part of the brew automation.
|
changeset |
files
|
Tue, 22 Dec 2015 15:59:26 +0100 |
Michiel Broek |
Manual mode now uses the PID's. The display shows heating percentage and the setpoints alternated very 2 seconds.
|
changeset |
files
|
Mon, 21 Dec 2015 22:53:29 +0100 |
Michiel Broek |
Revised brew steps again
|
changeset |
files
|
Mon, 21 Dec 2015 22:36:30 +0100 |
Michiel Broek |
Revised brew steps
|
changeset |
files
|
Mon, 21 Dec 2015 21:21:16 +0100 |
Michiel Broek |
Removed LCD auto dim mode, the display is allways on if this program runs.
|
changeset |
files
|
Mon, 21 Dec 2015 21:09:36 +0100 |
Michiel Broek |
Finished manual mode.
|
changeset |
files
|
Sun, 20 Dec 2015 23:26:03 +0100 |
Michiel Broek |
Manual mode works with heat percentages.
|
changeset |
files
|
Sun, 20 Dec 2015 20:52:37 +0100 |
Michiel Broek |
Added program locking.
|
changeset |
files
|
Sun, 20 Dec 2015 20:37:40 +0100 |
Michiel Broek |
Added file copy. Move home directory detection to the main program function. During opening of the main configuration file, backups are made, 10 revisions in total.
|
changeset |
files
|
Thu, 17 Dec 2015 22:45:54 +0100 |
Michiel Broek |
Completed the recipe editor.
|
changeset |
files
|
Wed, 16 Dec 2015 22:54:53 +0100 |
Michiel Broek |
Added recipe setup display menu.
|
changeset |
files
|
Wed, 16 Dec 2015 22:06:11 +0100 |
Michiel Broek |
Changed some prompt numbers. Added name editor.
|
changeset |
files
|
Tue, 15 Dec 2015 23:14:00 +0100 |
Michiel Broek |
Removed some development traces.
|
changeset |
files
|
Tue, 15 Dec 2015 23:11:42 +0100 |
Michiel Broek |
Added the beginning of the recipes editor. Added load and save of recipes file.
|
changeset |
files
|
Sat, 12 Dec 2015 22:17:25 +0100 |
Michiel Broek |
Fixes for compiling on Raspberry.
|
changeset |
files
|
Sat, 12 Dec 2015 21:47:04 +0100 |
Michiel Broek |
Updated configuration to allow hopstands.
|
changeset |
files
|
Sat, 12 Dec 2015 21:20:46 +0100 |
Michiel Broek |
Build a simulated immersion chiller. It will start on SIGUSR1 signal and stop on a SIGUSR2 signal. Hardcoded is te coolwater temperature at 14 degrees celcius.
|
changeset |
files
|
Sat, 12 Dec 2015 19:31:35 +0100 |
Michiel Broek |
Most parts of the simulator are working, needs some tuning.
|
changeset |
files
|
Fri, 11 Dec 2015 15:52:37 +0100 |
Michiel Broek |
Beginning of the main program loop
|
changeset |
files
|
Thu, 10 Dec 2015 21:34:28 +0100 |
Michiel Broek |
Moved manual menu to it's own function.
|
changeset |
files
|
Thu, 10 Dec 2015 17:31:45 +0100 |
Michiel Broek |
Changed device outputs and status leds.
|
changeset |
files
|
Thu, 10 Dec 2015 15:58:01 +0100 |
Michiel Broek |
Manual mode added.
|
changeset |
files
|
Sun, 06 Dec 2015 20:23:31 +0100 |
Michiel Broek |
Added selecting output relays.
|
changeset |
files
|
Sun, 06 Dec 2015 19:34:39 +0100 |
Michiel Broek |
Added selecting sensors.
|
changeset |
files
|
Sun, 06 Dec 2015 14:29:37 +0100 |
Michiel Broek |
Added PID editor.
|
changeset |
files
|
Sun, 06 Dec 2015 12:34:44 +0100 |
Michiel Broek |
Read/Write PID parameters from configuration.
|
changeset |
files
|
Sat, 05 Dec 2015 21:46:22 +0100 |
Michiel Broek |
Switched to PID code from Arduino
|
changeset |
files
|
Fri, 04 Dec 2015 22:57:23 +0100 |
Michiel Broek |
Changed internal storage of temperatures to float. Added 2 prompts. Added editors for float and integer values. Added most of brewunit edit functions.
|
changeset |
files
|
Fri, 04 Dec 2015 14:21:25 +0100 |
Michiel Broek |
Better brew state field names.
|
changeset |
files
|
Wed, 02 Dec 2015 17:16:41 +0100 |
Michiel Broek |
Added programming display CGRAM. Added display of characters from CGRAM. Changed prompts to allow free prompt strings. More code for the brewsystem unit editor.
|
changeset |
files
|
Sat, 28 Nov 2015 21:00:29 +0100 |
Michiel Broek |
Split some sources
|
changeset |
files
|
Sat, 28 Nov 2015 20:15:38 +0100 |
Michiel Broek |
Added automate state file.
|
changeset |
files
|
Sat, 28 Nov 2015 13:47:00 +0100 |
Michiel Broek |
Added prompts for the LCD. Basic processing loop written.
|
changeset |
files
|
Fri, 27 Nov 2015 22:56:26 +0100 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Fri, 27 Nov 2015 22:56:00 +0100 |
Michiel Broek |
Added simulator configuration.
|
changeset |
files
|
Fri, 27 Nov 2015 22:00:23 +0100 |
Michiel Broek |
Stop devices thread if the program ends.
|
changeset |
files
|
Thu, 26 Nov 2015 22:52:48 +0100 |
Michiel Broek |
Fixed compiling with wiringPi
|
changeset |
files
|
Thu, 26 Nov 2015 22:47:42 +0100 |
Michiel Broek |
More configuration items added.
|
changeset |
files
|
Wed, 25 Nov 2015 22:49:35 +0100 |
Michiel Broek |
Brewco first phase development configuration structure.
|
changeset |
files
|
Wed, 25 Nov 2015 16:39:25 +0100 |
Michiel Broek |
Bumped to version 0.5.1
|
changeset |
files
|
Wed, 25 Nov 2015 15:48:01 +0100 |
Michiel Broek |
The brewpanel can now run in daemon mode or debug mode.
|
changeset |
files
|
Wed, 25 Nov 2015 15:30:28 +0100 |
Michiel Broek |
Finished optional paneltype. Fixed all debug flags.
|
changeset |
files
|
Fri, 20 Nov 2015 23:29:55 +0100 |
Michiel Broek |
LCD backlight fixed to off state.
|
changeset |
files
|
Fri, 20 Nov 2015 22:43:50 +0100 |
Michiel Broek |
Dialog updates only
|
changeset |
files
|
Fri, 20 Nov 2015 20:49:58 +0100 |
Michiel Broek |
Fixed parameters pasing between different layers.
|
changeset |
files
|
Thu, 19 Nov 2015 22:50:17 +0100 |
Michiel Broek |
Initial part of LEDs and backlight implemented.
|
changeset |
files
|
Thu, 19 Nov 2015 21:17:26 +0100 |
Michiel Broek |
Moved global bit defines to config.h
|
changeset |
files
|
Thu, 19 Nov 2015 20:45:09 +0100 |
Michiel Broek |
Added LED objects to the SDL panel.
|
changeset |
files
|
Thu, 19 Nov 2015 15:05:19 +0100 |
Michiel Broek |
Updated design README
|
changeset |
files
|
Sun, 15 Nov 2015 21:12:11 +0100 |
Michiel Broek |
Fixed compiling for systems with wiringPi. Improved handling of udp sockets if there is no brewpanel running.
|
changeset |
files
|
Sat, 14 Nov 2015 23:40:51 +0100 |
Michiel Broek |
The brewpanel works, but still needs a lot more
|
changeset |
files
|
Sat, 14 Nov 2015 17:00:37 +0100 |
Michiel Broek |
Fixed compiling on a raspberry
|
changeset |
files
|
Sat, 14 Nov 2015 16:52:33 +0100 |
Michiel Broek |
The first ideas of the brewpanel simulation are in place.
|
changeset |
files
|
Sun, 08 Nov 2015 22:20:42 +0100 |
Michiel Broek |
Fixed compile
|
changeset |
files
|
Sun, 08 Nov 2015 22:13:02 +0100 |
Michiel Broek |
Reenabled code round LCD driver.
|
changeset |
files
|
Sun, 08 Nov 2015 21:24:52 +0100 |
Michiel Broek |
The server to panel socket protocol
|
changeset |
files
|
Sun, 08 Nov 2015 20:47:55 +0100 |
Michiel Broek |
Updated the panel layout.
|
changeset |
files
|
Sun, 08 Nov 2015 20:30:04 +0100 |
Michiel Broek |
Added cursor control, but no blinking yet.
|
changeset |
files
|
Sun, 08 Nov 2015 17:55:50 +0100 |
Michiel Broek |
The fontfile is now generated at the source site only to prevent the need for the imagemagic package on headless raspberries.
|
changeset |
files
|
Sun, 08 Nov 2015 17:50:01 +0100 |
Michiel Broek |
Updated dependencies.
|
changeset |
files
|
Sun, 08 Nov 2015 17:49:29 +0100 |
Michiel Broek |
Basic ideas to write to the simulated LCD display are in place.
|
changeset |
files
|
Sat, 07 Nov 2015 22:42:47 +0100 |
Michiel Broek |
Added configure message about SDL presence.
|
changeset |
files
|
Sat, 07 Nov 2015 22:34:28 +0100 |
Michiel Broek |
Fixed compiling on systems without SDL libraries, and they don't need tha brewpanel program.
|
changeset |
files
|
Sat, 07 Nov 2015 22:04:17 +0100 |
Michiel Broek |
Added a new brewpanel program that runs on an SDL/X screen. It will be an emulator for the hardware panels. Development version 0.5.0
|
changeset |
files
|
Mon, 05 Oct 2015 15:21:46 +0200 |
Michiel Broek |
Make sure that a DS2413 device used as input has the output latch turned off.
|
changeset |
files
|
Fri, 18 Sep 2015 12:55:49 +0200 |
Michiel Broek |
Removed thermometers program and directory. Version 0.4.3
|
changeset |
files
|
Thu, 17 Sep 2015 20:54:34 +0200 |
Michiel Broek |
Fixed compiling on a real RPi.
|
changeset |
files
|
Thu, 17 Sep 2015 20:45:01 +0200 |
Michiel Broek |
Code cleanup.
|
changeset |
files
|
Thu, 17 Sep 2015 20:38:07 +0200 |
Michiel Broek |
More tooltips again.
|
changeset |
files
|
Thu, 17 Sep 2015 17:31:43 +0200 |
Michiel Broek |
More tooltips
|
changeset |
files
|
Thu, 17 Sep 2015 17:09:09 +0200 |
Michiel Broek |
Set sane default profile values when not using a profile.
|
changeset |
files
|
Thu, 17 Sep 2015 17:01:15 +0200 |
Michiel Broek |
More fixes for profiles temperature window. Added the sliding beer/air target switch.
|
changeset |
files
|
Thu, 17 Sep 2015 15:52:46 +0200 |
Michiel Broek |
Adding tooltips in the liveview screen.
|
changeset |
files
|
Thu, 17 Sep 2015 13:15:23 +0200 |
Michiel Broek |
Changed frdige_mode paramater to 0..100 so we can work with a percentage.
|
changeset |
files
|
Thu, 17 Sep 2015 13:09:29 +0200 |
Michiel Broek |
Fixed crash after profile is finished. Fixed error in UNIT GET output.
|
changeset |
files
|
Wed, 16 Sep 2015 22:05:05 +0200 |
Michiel Broek |
Fermentation profiles now have a low and high temperature setting so that you can use a temperture window. Each profile step can now set for beer or air temperature reference. The logfiles have an extra temperature field for this. Bumped to version 0.4.2.
|
changeset |
files
|
Tue, 15 Sep 2015 17:29:15 +0200 |
Michiel Broek |
Bumped to version 0.4.1
|
changeset |
files
|
Tue, 15 Sep 2015 17:26:26 +0200 |
Michiel Broek |
Switched to new device read code. Removed the incomplete support for the DS2408 1-wire chip.
|
changeset |
files
|
Tue, 15 Sep 2015 15:37:39 +0200 |
Michiel Broek |
Spelling correction.
|
changeset |
files
|
Tue, 15 Sep 2015 14:50:35 +0200 |
Michiel Broek |
Fixed initialisation of new GPIO RS433 and DHT11 devices.
|
changeset |
files
|
Tue, 15 Sep 2015 14:44:21 +0200 |
Michiel Broek |
Fixed initialisation of new GPIO devices.
|
changeset |
files
|
Thu, 20 Aug 2015 21:14:44 +0200 |
Michiel Broek |
Bumped from version 0.3.7 to stable version 0.4.0
|
changeset |
files
|
Thu, 20 Aug 2015 15:58:32 +0200 |
Michiel Broek |
Graphs stepping should now work for archives and current fermenters.
|
changeset |
files
|
Thu, 20 Aug 2015 14:32:56 +0200 |
Michiel Broek |
Graph lines logging can handle longer logfiles and has a safety limit.
|
changeset |
files
|
Wed, 19 Aug 2015 22:09:17 +0200 |
Michiel Broek |
Create a new configuration file if it doesn't exist.
|
changeset |
files
|
Sat, 15 Aug 2015 11:27:54 +0200 |
Michiel Broek |
Changed graph spline type into line type.
|
changeset |
files
|
Fri, 07 Aug 2015 11:29:23 +0200 |
Michiel Broek |
Fixed adding a new unit.
|
changeset |
files
|
Sun, 02 Aug 2015 14:17:10 +0200 |
Michiel Broek |
Fixed month display in live view and archive view. Bumped to version 0.3.7.
|
changeset |
files
|
Tue, 21 Jul 2015 21:20:57 +0200 |
Michiel Broek |
Fixed date display formatting on the web pages. Tooltips display date and time, the normal X-axis only the date.
|
changeset |
files
|
Sat, 27 Jun 2015 17:28:16 +0200 |
Michiel Broek |
Bumped from version 0.3.5 to version 0.3.6.
|
changeset |
files
|
Sat, 27 Jun 2015 16:15:23 +0200 |
Michiel Broek |
Moved the simulators button in the maintenance panel
|
changeset |
files
|
Sat, 27 Jun 2015 14:24:39 +0200 |
Michiel Broek |
Only write configuration if something changed.
|
changeset |
files
|
Sat, 27 Jun 2015 14:08:49 +0200 |
Michiel Broek |
Help screens for the commands are moved into the commands.
|
changeset |
files
|
Sat, 27 Jun 2015 12:52:04 +0200 |
Michiel Broek |
Small code cleanup
|
changeset |
files
|
Fri, 26 Jun 2015 13:42:05 +0200 |
Michiel Broek |
Fixed profile steps updateing from the web interface.
|
changeset |
files
|
Sun, 21 Jun 2015 20:15:43 +0200 |
Michiel Broek |
Bumped to version 0.3.5
|
changeset |
files
|
Sun, 21 Jun 2015 20:09:51 +0200 |
Michiel Broek |
Improved Archives View layout.
|
changeset |
files
|
Sun, 21 Jun 2015 19:51:58 +0200 |
Michiel Broek |
In Archives, remove .log from download and view functions. Added new Save as PDF buttons.
|
changeset |
files
|
Sun, 14 Jun 2015 22:48:45 +0200 |
Michiel Broek |
Fixed php scripts for jqwidgets version 3.8.0
|
changeset |
files
|
Sun, 14 Jun 2015 20:39:36 +0200 |
Michiel Broek |
Upgraded jqwidgets from version 3.7.1 to version 3.8.0
|
changeset |
files
|
Tue, 02 Jun 2015 22:37:08 +0200 |
Michiel Broek |
Bumped to development version 0.3.4
|
changeset |
files
|
Tue, 02 Jun 2015 21:52:48 +0200 |
Michiel Broek |
Prevent undefined variables in getstate.php
|
changeset |
files
|
Tue, 02 Jun 2015 19:57:53 +0200 |
Michiel Broek |
Fixed memory leak in wrconfig
|
changeset |
files
|
Tue, 02 Jun 2015 17:50:05 +0200 |
Michiel Broek |
Removed debug log message
|
changeset |
files
|
Tue, 02 Jun 2015 17:13:13 +0200 |
Michiel Broek |
Fix for server crash
|
changeset |
files
|
Tue, 02 Jun 2015 14:14:20 +0200 |
Michiel Broek |
Fixed compiling on a real RPi
|
changeset |
files
|
Tue, 02 Jun 2015 14:03:46 +0200 |
Michiel Broek |
Better simulator temperature reality
|
changeset |
files
|
Mon, 18 May 2015 21:19:06 +0200 |
Michiel Broek |
Version 0.3.3, still not for production. Fixed warnings when the simulator code is compiled. Slowed the simulator air temperature change 60 times. More realistic temperature changes for the heater and cooler elements. Improved logic in the simulator.
|
changeset |
files
|
Sun, 17 May 2015 23:23:25 +0200 |
Michiel Broek |
Tuning PID code. Samll changes on the unit web page.
|
changeset |
files
|
Sun, 17 May 2015 19:34:55 +0200 |
Michiel Broek |
Back to the old PID algorythm. Version 0.3.1.
|
changeset |
files
|
Sat, 16 May 2015 17:39:30 +0200 |
Michiel Broek |
Made the client-server protocol more robust. When a change to a unit is made using the web interface, the main process is stopped during the update. Splitted the PID in two PID's, one for heating and one for cooling. Adjusted the web edit scrreen for this, but there are still rough edges. Replaced the PID code, maybe this one works better for our purpose. The simulator air temperature changes on the simulator heater and cooler, but it is not realistic at all. This is a development version, do not use in production. The version is 0.3.0
|
changeset |
files
|
Thu, 14 May 2015 22:03:35 +0200 |
Michiel Broek |
Experiment with zero window
|
changeset |
files
|
Sun, 05 Apr 2015 11:09:45 +0200 |
Michiel Broek |
Leds on if any state value is set.
|
changeset |
files
|
Thu, 02 Apr 2015 23:24:32 +0200 |
Michiel Broek |
Added ARCHIVE GET file download command.
|
changeset |
files
|
Thu, 02 Apr 2015 22:23:18 +0200 |
Michiel Broek |
Plot room temperature on the dashboard.
|
changeset |
files
|
Thu, 02 Apr 2015 22:08:15 +0200 |
Michiel Broek |
Added ARCHIVE LOG view.
|
changeset |
files
|
Thu, 02 Apr 2015 21:53:28 +0200 |
Michiel Broek |
Added room temperature to ARCHIVE LOG command output.
|
changeset |
files
|
Wed, 01 Apr 2015 23:13:08 +0200 |
Michiel Broek |
Added logging of the room temperature.
|
changeset |
files
|
Wed, 01 Apr 2015 22:54:27 +0200 |
Michiel Broek |
Fixed compile issue on non-Pi systems
|
changeset |
files
|
Wed, 01 Apr 2015 22:39:27 +0200 |
Michiel Broek |
Bumped to version 0.2.13.
|
changeset |
files
|
Wed, 01 Apr 2015 22:37:28 +0200 |
Michiel Broek |
Improved regular logging, disabled some debug logging.
|
changeset |
files
|
Wed, 01 Apr 2015 22:10:59 +0200 |
Michiel Broek |
Fixed auto device update timer
|
changeset |
files
|
Wed, 01 Apr 2015 21:56:35 +0200 |
Michiel Broek |
Added door and PSU sensors. Added interior light logic and switching.
|
changeset |
files
|
Wed, 01 Apr 2015 17:28:26 +0200 |
Michiel Broek |
Added Fan delay logic.
|
changeset |
files
|
Wed, 01 Apr 2015 15:56:04 +0200 |
Michiel Broek |
Changed Fan switch logic.
|
changeset |
files
|
Wed, 01 Apr 2015 15:20:05 +0200 |
Michiel Broek |
Completed DS2413 device code and driver.
|
changeset |
files
|
Thu, 26 Mar 2015 20:58:23 +0100 |
Michiel Broek |
Bumped to version 0.2.12
|
changeset |
files
|
Thu, 26 Mar 2015 20:55:43 +0100 |
Michiel Broek |
Added device direction and value in devices maintenance screen
|
changeset |
files
|
Thu, 26 Mar 2015 20:34:53 +0100 |
Michiel Broek |
Fixed Offset label in device editor. Added code to edit pin states for DS2408 and DS2413 1-wire devices.
|
changeset |
files
|
Thu, 26 Mar 2015 16:40:53 +0100 |
Michiel Broek |
Initialize offset to zero with new detected 1-wire devices.
|
changeset |
files
|
Mon, 23 Mar 2015 20:34:47 +0100 |
Michiel Broek |
Added device read for the DS2413 dual channel PIO
|
changeset |
files
|
Fri, 20 Mar 2015 22:49:22 +0100 |
Michiel Broek |
Possible part of DS2408 code added.
|
changeset |
files
|
Fri, 20 Mar 2015 22:22:18 +0100 |
Michiel Broek |
Experimental idea
|
changeset |
files
|
Fri, 20 Mar 2015 20:23:12 +0100 |
Michiel Broek |
Added defines copied from kernel source with 1-Wire device family numbers.
|
changeset |
files
|
Fri, 20 Mar 2015 16:56:07 +0100 |
Michiel Broek |
Added support for all 1-wire temperature sensors that are in the Linux kernel source.
|
changeset |
files
|
Thu, 19 Mar 2015 20:32:23 +0100 |
Michiel Broek |
More global device locking
|
changeset |
files
|
Wed, 18 Mar 2015 14:45:43 +0100 |
Michiel Broek |
Upgraded jqwidgets from version 3.6.0 to version 3.7.1
|
changeset |
files
|
Mon, 09 Mar 2015 09:42:18 +0100 |
Michiel Broek |
Added the README
|
changeset |
files
|
Sun, 08 Mar 2015 20:04:25 +0100 |
Michiel Broek |
Added url encoding
|
changeset |
files
|
Sun, 08 Mar 2015 19:52:53 +0100 |
Michiel Broek |
Added archives web page
|
changeset |
files
|
Sun, 08 Mar 2015 17:57:21 +0100 |
Michiel Broek |
Removed unused labview files
|
changeset |
files
|
Sun, 08 Mar 2015 17:26:54 +0100 |
Michiel Broek |
Added ARCHIVE LOG command
|
changeset |
files
|
Sun, 08 Mar 2015 16:51:19 +0100 |
Michiel Broek |
Improved help screen
|
changeset |
files
|
Sun, 08 Mar 2015 16:40:25 +0100 |
Michiel Broek |
Added ARCHIVE commands
|
changeset |
files
|
Sat, 07 Mar 2015 14:40:08 +0100 |
Michiel Broek |
Fixed error
|
changeset |
files
|
Sat, 07 Mar 2015 14:35:12 +0100 |
Michiel Broek |
Bumped to version 0.2.11
|
changeset |
files
|
Sat, 07 Mar 2015 14:32:09 +0100 |
Michiel Broek |
Changed die() handler
|
changeset |
files
|
Sat, 07 Mar 2015 13:36:45 +0100 |
Michiel Broek |
More device locks in the network server
|
changeset |
files
|
Sat, 07 Mar 2015 12:08:00 +0100 |
Michiel Broek |
Update for newer boards
|
changeset |
files
|
Sat, 07 Mar 2015 11:33:10 +0100 |
Michiel Broek |
Added extra lock
|
changeset |
files
|
Fri, 20 Feb 2015 16:07:39 +0100 |
Michiel Broek |
Bumped to version 0.2.10
|
changeset |
files
|
Fri, 20 Feb 2015 16:05:29 +0100 |
Michiel Broek |
Code cleanup and more conditions for debug temperature logging
|
changeset |
files
|
Thu, 19 Feb 2015 16:41:42 +0100 |
Michiel Broek |
The web dashboard now shows just 'history' on the graph
|
changeset |
files
|
Thu, 19 Feb 2015 16:39:35 +0100 |
Michiel Broek |
Actuators behind a PID now use power percentage instead of always 100%
|
changeset |
files
|
Thu, 19 Feb 2015 16:08:05 +0100 |
Michiel Broek |
Better protection, fixed fridge mode.
|
changeset |
files
|
Thu, 19 Feb 2015 15:43:43 +0100 |
Michiel Broek |
Simple temperature control in fridge mode.
|
changeset |
files
|
Thu, 19 Feb 2015 14:42:55 +0100 |
Michiel Broek |
Moved pid function to separate files
|
changeset |
files
|
Tue, 17 Feb 2015 23:27:47 +0100 |
Michiel Broek |
Better conditional PID logging
|
changeset |
files
|
Mon, 16 Feb 2015 23:21:45 +0100 |
Michiel Broek |
Restored blackout window
|
changeset |
files
|
Mon, 16 Feb 2015 20:41:09 +0100 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Mon, 16 Feb 2015 19:52:42 +0100 |
Michiel Broek |
Added more precision to the unit low and high black window margins. Switched to PID routine from Pid without a PhD. The PID compute routine is now in the one second loop. The switch delay times are now in seconds, 0..720.
|
changeset |
files
|
Sun, 15 Feb 2015 23:09:00 +0100 |
Michiel Broek |
PID changes and algorithm tuning.
|
changeset |
files
|
Sun, 15 Feb 2015 20:38:54 +0100 |
Michiel Broek |
Added Kp, Kd and Ki settings to the units. Bumped to version 0.2.9
|
changeset |
files
|
Sun, 15 Feb 2015 18:21:20 +0100 |
Michiel Broek |
Fixed logging of old pid error again
|
changeset |
files
|
Sun, 15 Feb 2015 18:18:44 +0100 |
Michiel Broek |
Fixed logging of old pid error
|
changeset |
files
|
Sun, 15 Feb 2015 18:06:21 +0100 |
Michiel Broek |
PID old error was not set to the previous value but was always zero.
|
changeset |
files
|
Sat, 07 Feb 2015 23:12:55 +0100 |
Michiel Broek |
Updated to add support for lights in a fermenter unit and a Power Supply status.
|
changeset |
files
|
Wed, 14 Jan 2015 13:20:16 +0100 |
Michiel Broek |
Better tab switching with a cookie
|
changeset |
files
|
Wed, 14 Jan 2015 12:50:12 +0100 |
Michiel Broek |
Added cookies to remember tabs
|
changeset |
files
|
Wed, 17 Dec 2014 15:44:58 +0100 |
Michiel Broek |
Added PING/PONG command to the server. Bumped to version 0.2.7
|
changeset |
files
|
Mon, 01 Dec 2014 14:15:22 +0100 |
Michiel Broek |
Use confirm instead of enter key when stepping to a new beer or fridge temperature
|
changeset |
files
|
Sat, 29 Nov 2014 21:03:31 +0100 |
Michiel Broek |
Upgraded jqwidgets to version 3.6.0
|
changeset |
files
|
Sat, 29 Nov 2014 16:07:34 +0100 |
Michiel Broek |
The LIST LOG command now automatic adjusts the number of output lines and resolution by calculating a reasonable interval between 1 and 60 minutes. Bumped to version 0.2.6
|
changeset |
files
|
Sat, 15 Nov 2014 20:35:32 +0100 |
Michiel Broek |
Show heater/cooler usgae in percent on the web page. Bunped to version 0.2.5
|
changeset |
files
|
Tue, 11 Nov 2014 16:19:07 +0100 |
Michiel Broek |
Fixed logfile header
|
changeset |
files
|
Tue, 11 Nov 2014 16:10:48 +0100 |
Michiel Broek |
Added usage counters to the beer logfiles. Bumped to version 0.2.4
|
changeset |
files
|
Sun, 02 Nov 2014 19:47:50 +0100 |
Michiel Broek |
Thinner lines for chart drawing
|
changeset |
files
|
Sun, 02 Nov 2014 18:00:05 +0100 |
Michiel Broek |
Added print and save as png buttons
|
changeset |
files
|
Sun, 02 Nov 2014 13:47:57 +0100 |
Michiel Broek |
Added comment
|
changeset |
files
|
Wed, 29 Oct 2014 20:27:37 +0100 |
Michiel Broek |
Added usage counters
|
changeset |
files
|
Wed, 29 Oct 2014 14:41:00 +0100 |
Michiel Broek |
Corrected margin labels
|
changeset |
files
|
Wed, 29 Oct 2014 14:36:53 +0100 |
Michiel Broek |
Corrected margin labels
|
changeset |
files
|
Sat, 25 Oct 2014 21:16:25 +0200 |
Michiel Broek |
Bumped to version 0.2.3
|
changeset |
files
|
Sat, 25 Oct 2014 21:08:47 +0200 |
Michiel Broek |
Added code to detect primary fermentation
|
changeset |
files
|
Wed, 22 Oct 2014 12:42:20 +0200 |
Michiel Broek |
Corrected comment
|
changeset |
files
|
Thu, 04 Sep 2014 14:07:09 +0200 |
Michiel Broek |
Make ajax response for profile state the same as the startup state
|
changeset |
files
|
Wed, 03 Sep 2014 15:38:01 +0200 |
Michiel Broek |
The global system name was not saved or restored from the configuration file.
|
changeset |
files
|
Wed, 03 Sep 2014 15:29:46 +0200 |
Michiel Broek |
LIST LOG sends lines per 30 minutes instead of 10 minutes.
|
changeset |
files
|
Wed, 03 Sep 2014 15:02:09 +0200 |
Michiel Broek |
Profile progress is visible in the web interface
|
changeset |
files
|
Tue, 02 Sep 2014 16:54:18 +0200 |
Michiel Broek |
Bumped to version 0.2.2
|
changeset |
files
|
Tue, 02 Sep 2014 16:37:43 +0200 |
Michiel Broek |
UNIT PUT command logging added.
|
changeset |
files
|
Tue, 02 Sep 2014 15:32:00 +0200 |
Michiel Broek |
SIMULATOR PUT command logging added.
|
changeset |
files
|
Tue, 02 Sep 2014 15:14:53 +0200 |
Michiel Broek |
PROFILE PUTS command logging added.
|
changeset |
files
|
Tue, 02 Sep 2014 15:07:34 +0200 |
Michiel Broek |
PROFILE PUT command logging added.
|
changeset |
files
|
Tue, 02 Sep 2014 15:02:33 +0200 |
Michiel Broek |
GLOBAL PUT command logging added.
|
changeset |
files
|
Tue, 02 Sep 2014 14:14:54 +0200 |
Michiel Broek |
Fixed profile progess percentage
|
changeset |
files
|
Tue, 02 Sep 2014 14:10:37 +0200 |
Michiel Broek |
Profile progress logging now also shows the percentage done. The DEVICE PUT command logs all changed values.
|
changeset |
files
|
Mon, 01 Sep 2014 22:06:39 +0200 |
Michiel Broek |
Better profile progress logging
|
changeset |
files
|
Mon, 01 Sep 2014 15:43:13 +0200 |
Michiel Broek |
Added logging if profile state is changed via the web interface. Log profile progress each half hour in syslog. Profile resttime steps 0 hours is allowed, meaning resttime or steptime must be set for a valid step. Updated the helptext on the web page.
|
changeset |
files
|
Sun, 31 Aug 2014 18:25:32 +0200 |
Michiel Broek |
Fixed unit edit heater/cooler delay values. Heater and Cooler start/stop now use a different algorithm.
|
changeset |
files
|
Sun, 31 Aug 2014 17:51:04 +0200 |
Michiel Broek |
Added Heater and Cooler delay edit fields. Added more checks on entered data in the units edit screen.
|
changeset |
files
|
Sat, 30 Aug 2014 22:15:54 +0200 |
Michiel Broek |
Specified date formatting
|
changeset |
files
|
Sat, 30 Aug 2014 13:06:07 +0200 |
Michiel Broek |
The PID commands have an adjustable delay, default 5 minutes
|
changeset |
files
|
Tue, 26 Aug 2014 14:45:03 +0200 |
Michiel Broek |
All web screens now show the program name and version
|
changeset |
files
|
Tue, 26 Aug 2014 13:50:35 +0200 |
Michiel Broek |
All syslog logging only to LOG_NOTICE
|
changeset |
files
|
Mon, 25 Aug 2014 21:33:57 +0200 |
Michiel Broek |
Don't log debug pid messages if there is no error difference
|
changeset |
files
|
Mon, 25 Aug 2014 20:47:30 +0200 |
Michiel Broek |
Better log output for web graphs. Webgraphs can now display heater and cooler usage.
|
changeset |
files
|
Sun, 24 Aug 2014 23:01:32 +0200 |
Michiel Broek |
More math for the simulator. Web interface changes for heater in graph.
|
changeset |
files
|
Sun, 24 Aug 2014 14:41:31 +0200 |
Michiel Broek |
LIST LOG also output lines on state changes
|
changeset |
files
|
Sat, 23 Aug 2014 23:43:11 +0200 |
Michiel Broek |
Fixed stdout debug messages
|
changeset |
files
|
Sat, 23 Aug 2014 23:38:18 +0200 |
Michiel Broek |
Simulation of fridge cold loss to the room added for testing.
|
changeset |
files
|
Sat, 23 Aug 2014 12:48:55 +0200 |
Michiel Broek |
Fixed cooler_size bug
|
changeset |
files
|
Sat, 23 Aug 2014 12:33:14 +0200 |
Michiel Broek |
Added Simulator editor
|
changeset |
files
|
Fri, 22 Aug 2014 17:12:42 +0200 |
Michiel Broek |
Added framework for a simulation of a fridge with heater to use as controlled fermentor
|
changeset |
files
|
Wed, 20 Aug 2014 22:15:12 +0200 |
Michiel Broek |
Updated web dashboard layout
|
changeset |
files
|
Wed, 20 Aug 2014 17:42:35 +0200 |
Michiel Broek |
Automatic ajax updates of radio buttons
|
changeset |
files
|
Wed, 20 Aug 2014 14:01:15 +0200 |
Michiel Broek |
Slowdown room temperature/humidity updates to 60 seconds
|
changeset |
files
|
Wed, 20 Aug 2014 13:51:44 +0200 |
Michiel Broek |
Added function send_array_check
|
changeset |
files
|
Wed, 20 Aug 2014 13:10:10 +0200 |
Michiel Broek |
Units editor uses array commands
|
changeset |
files
|
Wed, 20 Aug 2014 13:02:12 +0200 |
Michiel Broek |
Global and profile editor use array commands
|
changeset |
files
|
Wed, 20 Aug 2014 12:46:31 +0200 |
Michiel Broek |
Device editor uses array commands
|
changeset |
files
|
Wed, 20 Aug 2014 12:02:49 +0200 |
Michiel Broek |
Made a function to send arrays to the server. The room temperature and humidity are now displayed at once when the dashboard is loaded.
|
changeset |
files
|
Mon, 18 Aug 2014 20:00:30 +0200 |
Michiel Broek |
Bumped to version 0.2.0
|
changeset |
files
|
Mon, 18 Aug 2014 19:58:56 +0200 |
Michiel Broek |
Fixed conditional compile
|
changeset |
files
|
Mon, 18 Aug 2014 19:55:52 +0200 |
Michiel Broek |
Removed two system menus that would not work correctly. All panel menus are complete now.
|
changeset |
files
|
Mon, 18 Aug 2014 19:44:41 +0200 |
Michiel Broek |
Added profile panel menus and system panel menus
|
changeset |
files
|
Mon, 18 Aug 2014 16:13:56 +0200 |
Michiel Broek |
Setting fridge and beer temperature from the panel implemented
|
changeset |
files
|
Mon, 18 Aug 2014 15:10:09 +0200 |
Michiel Broek |
You can now safely add and remove units on a running system.
|
changeset |
files
|
Sat, 16 Aug 2014 17:11:09 +0200 |
Michiel Broek |
Selecting units in setup does now work. Menu select variables are protected with thread locking.
|
changeset |
files
|
Sat, 16 Aug 2014 15:38:45 +0200 |
Michiel Broek |
Fixed add unit web interface
|
changeset |
files
|
Fri, 15 Aug 2014 14:43:32 +0200 |
Michiel Broek |
Fixed conditionals on systems without wiringPi.
|
changeset |
files
|
Fri, 15 Aug 2014 14:38:32 +0200 |
Michiel Broek |
Added thread locks to all LCD access functions. This seems to have fixed the LCD corruption problems.
|
changeset |
files
|
Thu, 14 Aug 2014 22:43:41 +0200 |
Michiel Broek |
Added thread locks for device processing
|
changeset |
files
|
Thu, 14 Aug 2014 22:02:33 +0200 |
Michiel Broek |
Increase priority for the devices thread
|
changeset |
files
|
Thu, 14 Aug 2014 21:50:38 +0200 |
Michiel Broek |
Added more panel menus
|
changeset |
files
|
Wed, 13 Aug 2014 22:02:14 +0200 |
Michiel Broek |
Add a sane default for profile precessing.
|
changeset |
files
|
Wed, 13 Aug 2014 21:48:57 +0200 |
Michiel Broek |
Bumped to version 0.1.0
|
changeset |
files
|
Wed, 13 Aug 2014 21:41:10 +0200 |
Michiel Broek |
Changed a lot of loglevels
|
changeset |
files
|
Wed, 13 Aug 2014 21:21:55 +0200 |
Michiel Broek |
Added loggin when a device is switched on or off in beer/fridge/profile mode.
|
changeset |
files
|
Wed, 13 Aug 2014 21:04:29 +0200 |
Michiel Broek |
Added code to control the Fan.
|
changeset |
files
|
Wed, 13 Aug 2014 20:47:00 +0200 |
Michiel Broek |
Fix new device creation
|
changeset |
files
|
Wed, 13 Aug 2014 19:58:01 +0200 |
Michiel Broek |
Spelling errwror
|
changeset |
files
|
Wed, 13 Aug 2014 19:48:20 +0200 |
Michiel Broek |
Added logging for wrong LCD buffer allocations
|
changeset |
files
|
Wed, 13 Aug 2014 19:40:01 +0200 |
Michiel Broek |
Move some public functions to private functions
|
changeset |
files
|
Wed, 13 Aug 2014 19:14:01 +0200 |
Michiel Broek |
Fixed stepping down in LCD screens.
|
changeset |
files
|
Wed, 13 Aug 2014 17:37:59 +0200 |
Michiel Broek |
Remove debug log information about regular configuration saving.
|
changeset |
files
|
Wed, 13 Aug 2014 14:10:57 +0200 |
Michiel Broek |
Added debug log info to lcd_buf functions.
|
changeset |
files
|
Tue, 12 Aug 2014 21:26:26 +0200 |
Michiel Broek |
Changed CSS colors for the LED's. Removed the old LED's.
|
changeset |
files
|
Tue, 12 Aug 2014 17:54:48 +0200 |
Michiel Broek |
LED's using css styling.
|
changeset |
files
|
Tue, 12 Aug 2014 13:09:50 +0200 |
Michiel Broek |
Removed LCD shadow copy buffer.
|
changeset |
files
|
Tue, 12 Aug 2014 12:49:26 +0200 |
Michiel Broek |
Increased buffersize
|
changeset |
files
|
Tue, 12 Aug 2014 12:42:15 +0200 |
Michiel Broek |
Fixed end of profile steps, didn't go to the PROFILE_DONE state.
|
changeset |
files
|
Mon, 11 Aug 2014 19:17:32 +0200 |
Michiel Broek |
Make sure we don't read the DHT11 within 2 seconds.
|
changeset |
files
|
Mon, 11 Aug 2014 18:38:57 +0200 |
Michiel Broek |
Added profile running and steps handling.
|
changeset |
files
|
Mon, 11 Aug 2014 12:34:49 +0200 |
Michiel Broek |
Added profile state ABORT
|
changeset |
files
|
Mon, 11 Aug 2014 12:34:05 +0200 |
Michiel Broek |
Added profile state ABORT
|
changeset |
files
|
Mon, 11 Aug 2014 11:50:23 +0200 |
Michiel Broek |
LED flash when panel enter key is pressed long.
|
changeset |
files
|
Mon, 11 Aug 2014 11:09:23 +0200 |
Michiel Broek |
Do not use 100% cpu on a system without devices
|
changeset |
files
|
Sun, 10 Aug 2014 23:36:22 +0200 |
Michiel Broek |
Added a bunch of panel menus
|
changeset |
files
|
Sun, 10 Aug 2014 21:22:17 +0200 |
Michiel Broek |
Code cleanup, streamlined error messages.
|
changeset |
files
|
Sun, 10 Aug 2014 20:01:17 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Sun, 10 Aug 2014 17:43:33 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Sun, 10 Aug 2014 17:42:02 +0200 |
Michiel Broek |
Removed debugging output
|
changeset |
files
|
Sun, 10 Aug 2014 17:25:50 +0200 |
Michiel Broek |
Added offset value for sensor that need it
|
changeset |
files
|
Sun, 10 Aug 2014 16:56:22 +0200 |
Michiel Broek |
Added room temperature and humidity to the web interface
|
changeset |
files
|
Sun, 10 Aug 2014 16:17:03 +0200 |
Michiel Broek |
Added global setup
|
changeset |
files
|
Sun, 10 Aug 2014 14:45:11 +0200 |
Michiel Broek |
Added GLOBAL GET and GLOBAL PUT commands.
|
changeset |
files
|
Sun, 10 Aug 2014 13:26:35 +0200 |
Michiel Broek |
Start initial menu setup
|
changeset |
files
|
Sun, 10 Aug 2014 12:09:07 +0200 |
Michiel Broek |
Fixed LCD display updates. Better key routines.
|
changeset |
files
|
Sat, 09 Aug 2014 23:13:56 +0200 |
Michiel Broek |
Added DHT11 sensor code
|
changeset |
files
|
Sat, 09 Aug 2014 22:48:21 +0200 |
Michiel Broek |
Code added on the wrong machine
|
changeset |
files
|
Sat, 09 Aug 2014 21:43:09 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Sat, 09 Aug 2014 21:42:28 +0200 |
Michiel Broek |
Added first panel key routines. The LCD display steps manual only and has a 2 minutes backlight timeout.
|
changeset |
files
|
Sat, 09 Aug 2014 17:24:32 +0200 |
Michiel Broek |
Added panel thread
|
changeset |
files
|
Sat, 09 Aug 2014 17:06:25 +0200 |
Michiel Broek |
Added dependencies for panel
|
changeset |
files
|
Sat, 09 Aug 2014 16:56:31 +0200 |
Michiel Broek |
Added panel sourcecode files
|
changeset |
files
|
Sat, 09 Aug 2014 11:29:02 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Fri, 08 Aug 2014 23:07:44 +0200 |
Michiel Broek |
Reset output when a different profile is selected. Better startup logging about the unit state. Added Beer, Fridge and partial Profile settings from the liveview weeb screen.
|
changeset |
files
|
Thu, 07 Aug 2014 22:06:18 +0200 |
Michiel Broek |
Added some ideas about profiles.
|
changeset |
files
|
Thu, 07 Aug 2014 21:19:30 +0200 |
Michiel Broek |
Auto refresh LED's state added.
|
changeset |
files
|
Thu, 07 Aug 2014 20:34:07 +0200 |
Michiel Broek |
Added PROFILE GET and PROFILE PUT commands. Adjusted the web interface
|
changeset |
files
|
Thu, 07 Aug 2014 19:38:30 +0200 |
Michiel Broek |
Client/Server communication is now almost final
|
changeset |
files
|
Thu, 07 Aug 2014 16:44:53 +0200 |
Michiel Broek |
Removed private directory
|
changeset |
files
|
Thu, 07 Aug 2014 14:20:11 +0200 |
Michiel Broek |
Init logfile when a unit is turned on. Added comments for profile processing.
|
changeset |
files
|
Tue, 05 Aug 2014 22:50:33 +0200 |
Michiel Broek |
Added heat/cool state to the LCD display
|
changeset |
files
|
Tue, 05 Aug 2014 22:29:22 +0200 |
Michiel Broek |
Updated conditional defines and dependencies
|
changeset |
files
|
Tue, 05 Aug 2014 21:46:49 +0200 |
Michiel Broek |
Added setting of initial target temperature
|
changeset |
files
|
Tue, 05 Aug 2014 21:33:06 +0200 |
Michiel Broek |
PID finetuning
|
changeset |
files
|
Tue, 05 Aug 2014 16:24:17 +0200 |
Michiel Broek |
Fixed switching problems
|
changeset |
files
|
Tue, 05 Aug 2014 15:45:23 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Tue, 05 Aug 2014 15:44:29 +0200 |
Michiel Broek |
Removing units thread
|
changeset |
files
|
Tue, 05 Aug 2014 11:57:05 +0200 |
Michiel Broek |
Fixed double commands to 433 MHz switches, they did not switch.
|
changeset |
files
|
Mon, 04 Aug 2014 23:36:05 +0200 |
Michiel Broek |
Add missing sources
|
changeset |
files
|
Mon, 04 Aug 2014 23:34:22 +0200 |
Michiel Broek |
Added PID implementation and 433 MHz radio control switches. Not reliable yet.
|
changeset |
files
|
Mon, 04 Aug 2014 19:31:03 +0200 |
Michiel Broek |
Web - server communication for switches improved.
|
changeset |
files
|
Mon, 04 Aug 2014 15:25:13 +0200 |
Michiel Broek |
Added some comments
|
changeset |
files
|
Mon, 04 Aug 2014 15:18:29 +0200 |
Michiel Broek |
Initial code for a simple PID controller.
|
changeset |
files
|
Sun, 03 Aug 2014 22:49:33 +0200 |
Michiel Broek |
Units editing is more or less complete. Changed structures for heating, cooling, fan and door. Updated the web interface to confuigure all these things.
|
changeset |
files
|
Sat, 02 Aug 2014 22:33:15 +0200 |
Michiel Broek |
Added device configuration
|
changeset |
files
|
Fri, 01 Aug 2014 22:53:58 +0200 |
Michiel Broek |
More style updates
|
changeset |
files
|
Fri, 01 Aug 2014 22:21:57 +0200 |
Michiel Broek |
Added style to the maintenance menu
|
changeset |
files
|
Fri, 01 Aug 2014 21:40:02 +0200 |
Michiel Broek |
Ajax screen updates now use a single call to the server
|
changeset |
files
|
Fri, 01 Aug 2014 16:13:55 +0200 |
Michiel Broek |
A bit of code cleanup
|
changeset |
files
|
Fri, 01 Aug 2014 14:45:32 +0200 |
Michiel Broek |
Small fix for NA values
|
changeset |
files
|
Fri, 01 Aug 2014 14:42:44 +0200 |
Michiel Broek |
Temperature auto refresh and some layout improvements.
|
changeset |
files
|
Fri, 01 Aug 2014 11:45:35 +0200 |
Michiel Broek |
Fixed GET AIR|BEER commands. Save configuration every 30 minutes.
|
changeset |
files
|
Fri, 01 Aug 2014 09:25:38 +0200 |
Michiel Broek |
Forgot some close functions so tha program ran out of file descriptors. Better loggin for writing the configuration.
|
changeset |
files
|
Thu, 31 Jul 2014 23:57:04 +0200 |
Michiel Broek |
Removed old 1-wire bus
|
changeset |
files
|
Thu, 31 Jul 2014 23:39:11 +0200 |
Michiel Broek |
Threads partly working via new devices interface
|
changeset |
files
|
Thu, 31 Jul 2014 22:15:22 +0200 |
Michiel Broek |
LIST BUS now displays the new devices table. Adjusted the web screen
|
changeset |
files
|
Thu, 31 Jul 2014 21:04:06 +0200 |
Michiel Broek |
Added Raspberry GPIO devices
|
changeset |
files
|
Thu, 31 Jul 2014 19:29:54 +0200 |
Michiel Broek |
Small fixes for device configuration
|
changeset |
files
|
Thu, 31 Jul 2014 17:52:41 +0200 |
Michiel Broek |
Fixed wrong includes
|
changeset |
files
|
Thu, 31 Jul 2014 17:48:59 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Thu, 31 Jul 2014 17:44:50 +0200 |
Michiel Broek |
Added device configuration
|
changeset |
files
|
Thu, 31 Jul 2014 13:43:09 +0200 |
Michiel Broek |
Added GET AIR, GET BEER, GET TARGET commands
|
changeset |
files
|
Wed, 30 Jul 2014 23:06:46 +0200 |
Michiel Broek |
Update LCD even when unit is off
|
changeset |
files
|
Wed, 30 Jul 2014 22:57:48 +0200 |
Michiel Broek |
Unit mode can switch between OFF and NONE.
|
changeset |
files
|
Wed, 30 Jul 2014 19:39:50 +0200 |
Michiel Broek |
Added style to radiobuttons
|
changeset |
files
|
Wed, 30 Jul 2014 19:05:11 +0200 |
Michiel Broek |
Added the framework for the units editor. In the dashboard the radio selector buttons are converteed to jqwidgets radiobuttons.
|
changeset |
files
|
Wed, 30 Jul 2014 15:27:37 +0200 |
Michiel Broek |
Merged
|
changeset |
files
|
Wed, 30 Jul 2014 15:26:29 +0200 |
Michiel Broek |
Improved dashboard panel style, added (ugly) led's
|
changeset |
files
|
Wed, 30 Jul 2014 10:41:54 +0200 |
Michiel Broek |
Removed old thermferm.log file
|
changeset |
files
|
Tue, 29 Jul 2014 21:33:38 +0200 |
Michiel Broek |
More small fixes, new dependencies generated
|
changeset |
files
|
Tue, 29 Jul 2014 21:31:36 +0200 |
Michiel Broek |
new .h file
|
changeset |
files
|
Tue, 29 Jul 2014 21:30:18 +0200 |
Michiel Broek |
Code cleanup and fixes
|
changeset |
files
|
Tue, 29 Jul 2014 21:12:43 +0200 |
Michiel Broek |
Code fixes and cleanup
|
changeset |
files
|
Tue, 29 Jul 2014 21:05:40 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Tue, 29 Jul 2014 20:42:02 +0200 |
Michiel Broek |
Removed code dependencies to mosquitto and owfs
|
changeset |
files
|
Tue, 29 Jul 2014 20:11:23 +0200 |
Michiel Broek |
Removed mosquitto dependency
|
changeset |
files
|
Mon, 28 Jul 2014 21:41:03 +0200 |
Michiel Broek |
Bumped to version 0.0.11. Added owserver C api.
|
changeset |
files
|
Sun, 27 Jul 2014 21:04:57 +0200 |
Michiel Broek |
Small fix
|
changeset |
files
|
Sun, 27 Jul 2014 17:06:08 +0200 |
Michiel Broek |
Implemented PROFILE PUTS command
|
changeset |
files
|
Sat, 26 Jul 2014 22:26:30 +0200 |
Michiel Broek |
Better screen name
|
changeset |
files
|
Sat, 26 Jul 2014 22:18:44 +0200 |
Michiel Broek |
Added DEL PROFILE command
|
changeset |
files
|
Sat, 26 Jul 2014 17:30:47 +0200 |
Michiel Broek |
Profiles can be managed via the web interface
|
changeset |
files
|
Sat, 26 Jul 2014 13:18:00 +0200 |
Michiel Broek |
Profiles now have a busy state
|
changeset |
files
|
Fri, 25 Jul 2014 23:28:44 +0200 |
Michiel Broek |
Removed obsolete files
|
changeset |
files
|
Fri, 25 Jul 2014 23:27:08 +0200 |
Michiel Broek |
Redesigned the web interface, one single app is too slow. The main dashboard will be a shiny ajax driven page, the setup pages will be simple and php only. Keep It Simple, Stupid.
|
changeset |
files
|
Thu, 24 Jul 2014 23:14:20 +0200 |
Michiel Broek |
Fixed compiling on systems with wiringpi libs
|
changeset |
files
|
Thu, 24 Jul 2014 23:11:28 +0200 |
Michiel Broek |
Added some profile commands to the server. Profile names can be changed from the web interface. Removed obsolete commands.
|
changeset |
files
|
Thu, 24 Jul 2014 20:45:15 +0200 |
Michiel Broek |
Always use uuid to select units and remove numeric record id's.
|
changeset |
files
|
Thu, 24 Jul 2014 17:42:34 +0200 |
Michiel Broek |
Added maintenance tabs for units and profiles
|
changeset |
files
|
Wed, 23 Jul 2014 21:34:02 +0200 |
Michiel Broek |
Removed sorting of 1-Wire devices because the busy indicator doesn't dissapear
|
changeset |
files
|
Wed, 23 Jul 2014 21:18:05 +0200 |
Michiel Broek |
Added loading of grid.sort
|
changeset |
files
|
Wed, 23 Jul 2014 21:14:20 +0200 |
Michiel Broek |
Added the maintenance 1-Wire display tab
|
changeset |
files
|
Wed, 23 Jul 2014 17:12:18 +0200 |
Michiel Broek |
Added getbus script
|
changeset |
files
|
Wed, 23 Jul 2014 17:07:29 +0200 |
Michiel Broek |
Fixed LIST BUS output
|
changeset |
files
|
Wed, 23 Jul 2014 16:49:37 +0200 |
Michiel Broek |
Added maintenance tabs and extended server output
|
changeset |
files
|
Tue, 22 Jul 2014 23:14:19 +0200 |
Michiel Broek |
Now uses the real data for the chart
|
changeset |
files
|
Tue, 22 Jul 2014 20:15:09 +0200 |
Michiel Broek |
Added fermentor maintenance windows
|
changeset |
files
|
Tue, 22 Jul 2014 17:56:56 +0200 |
Michiel Broek |
Initial setup to draw charts
|
changeset |
files
|
Mon, 21 Jul 2014 22:19:24 +0200 |
Michiel Broek |
Added LIST LOG command
|
changeset |
files
|
Mon, 21 Jul 2014 19:31:28 +0200 |
Michiel Broek |
Removed obsolete file
|
changeset |
files
|
Mon, 21 Jul 2014 17:16:08 +0200 |
Michiel Broek |
Added maintenance window with only two buttons yet
|
changeset |
files
|
Sun, 20 Jul 2014 23:09:50 +0200 |
Michiel Broek |
Initial setup of wqwidgets
|
changeset |
files
|
Fri, 18 Jul 2014 22:24:03 +0200 |
Michiel Broek |
Added jquery script. Added radio buttons for unit mode
|
changeset |
files
|
Fri, 18 Jul 2014 16:57:27 +0200 |
Michiel Broek |
New screen layout
|
changeset |
files
|
Fri, 18 Jul 2014 16:33:41 +0200 |
Michiel Broek |
Removed toolkit
|
changeset |
files
|
Thu, 17 Jul 2014 21:19:22 +0200 |
Michiel Broek |
Created control panel layout
|
changeset |
files
|
Wed, 16 Jul 2014 13:42:14 +0200 |
Michiel Broek |
Added buttons
|
changeset |
files
|
Sun, 13 Jul 2014 22:13:13 +0200 |
Michiel Broek |
Added missing conditional
|
changeset |
files
|
Sun, 13 Jul 2014 22:11:46 +0200 |
Michiel Broek |
Was not added
|
changeset |
files
|
Sun, 13 Jul 2014 21:01:18 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Sun, 13 Jul 2014 21:00:01 +0200 |
Michiel Broek |
New rotating LCD display
|
changeset |
files
|
Sun, 13 Jul 2014 17:34:41 +0200 |
Michiel Broek |
Updated dependencies, bumped to version 0.0.10
|
changeset |
files
|
Sun, 13 Jul 2014 17:31:45 +0200 |
Michiel Broek |
Added .h files
|
changeset |
files
|
Sat, 12 Jul 2014 23:50:48 +0200 |
Michiel Broek |
Started code of roulating lcd display
|
changeset |
files
|
Sat, 12 Jul 2014 22:32:29 +0200 |
Michiel Broek |
Added units logging
|
changeset |
files
|
Sat, 12 Jul 2014 21:59:19 +0200 |
Michiel Broek |
Added the mash sourcecode, this does nothing useful yet.
|
changeset |
files
|
Sat, 12 Jul 2014 19:22:13 +0200 |
Michiel Broek |
Units can display the temperature
|
changeset |
files
|
Sat, 12 Jul 2014 17:57:53 +0200 |
Michiel Broek |
Made temperature sensors working in the units
|
changeset |
files
|
Fri, 11 Jul 2014 22:53:33 +0200 |
Michiel Broek |
Basic web idea
|
changeset |
files
|
Fri, 11 Jul 2014 13:29:26 +0200 |
Michiel Broek |
Cleanup
|
changeset |
files
|
Thu, 10 Jul 2014 11:46:27 +0200 |
Michiel Broek |
Start over again with web pages
|
changeset |
files
|
Tue, 08 Jul 2014 23:53:04 +0200 |
Michiel Broek |
Added initial set for the thermferm web interface
|
changeset |
files
|
Mon, 07 Jul 2014 22:51:59 +0200 |
Michiel Broek |
Fixed NULL writing
|
changeset |
files
|
Mon, 07 Jul 2014 22:31:07 +0200 |
Michiel Broek |
Removed old brewPi settings
|
changeset |
files
|
Mon, 07 Jul 2014 21:15:44 +0200 |
Michiel Broek |
Fixed possible one character short on LCD. Added environment air temperature sensor
|
changeset |
files
|
Fri, 04 Jul 2014 23:37:53 +0200 |
Michiel Broek |
Added units processing thread
|
changeset |
files
|
Fri, 04 Jul 2014 20:00:19 +0200 |
Michiel Broek |
Added profiles configuration
|
changeset |
files
|
Thu, 03 Jul 2014 23:11:44 +0200 |
Michiel Broek |
Added fermenting profiles to the configuration
|
changeset |
files
|
Wed, 02 Jul 2014 22:41:31 +0200 |
Michiel Broek |
Added profile parameters
|
changeset |
files
|
Wed, 02 Jul 2014 22:17:10 +0200 |
Michiel Broek |
Added profile states
|
changeset |
files
|
Wed, 02 Jul 2014 22:09:35 +0200 |
Michiel Broek |
Added SET commands
|
changeset |
files
|
Wed, 02 Jul 2014 17:57:06 +0200 |
Michiel Broek |
Added unit command and list unit command
|
changeset |
files
|
Tue, 01 Jul 2014 23:14:57 +0200 |
Michiel Broek |
Using final user paths for log, configuration and profiles
|
changeset |
files
|
Tue, 01 Jul 2014 21:53:03 +0200 |
Michiel Broek |
Changes to the 1-wire bus listing layout
|
changeset |
files
|
Tue, 01 Jul 2014 21:41:31 +0200 |
Michiel Broek |
Can list the 1-wire bus
|
changeset |
files
|
Thu, 26 Jun 2014 21:26:33 +0200 |
Michiel Broek |
Removed old ascii configuration
|
changeset |
files
|
Thu, 26 Jun 2014 21:00:21 +0200 |
Michiel Broek |
Corrected a spelling error in the xml parser
|
changeset |
files
|
Thu, 26 Jun 2014 20:55:34 +0200 |
Michiel Broek |
Added list command
|
changeset |
files
|
Thu, 26 Jun 2014 20:00:00 +0200 |
Michiel Broek |
Switched to xml configuration
|
changeset |
files
|
Wed, 25 Jun 2014 19:42:03 +0200 |
Michiel Broek |
Added uuid library
|
changeset |
files
|
Wed, 25 Jun 2014 17:18:01 +0200 |
Michiel Broek |
Added lcd i2c address to xml configuration
|
changeset |
files
|
Wed, 25 Jun 2014 16:56:09 +0200 |
Michiel Broek |
Added old configuration to write xml config
|
changeset |
files
|
Wed, 25 Jun 2014 16:16:47 +0200 |
Michiel Broek |
Can now write the fermenter units configurations
|
changeset |
files
|
Tue, 24 Jun 2014 22:38:46 +0200 |
Michiel Broek |
Writes a basic xml configuration next to the plain ascii config file
|
changeset |
files
|
Tue, 24 Jun 2014 20:21:07 +0200 |
Michiel Broek |
Reinstalled threads
|
changeset |
files
|
Mon, 23 Jun 2014 22:50:29 +0200 |
Michiel Broek |
Changed include files
|
changeset |
files
|
Mon, 23 Jun 2014 22:41:09 +0200 |
Michiel Broek |
Final steps removing rc-switch from thermferm
|
changeset |
files
|
Mon, 23 Jun 2014 22:16:29 +0200 |
Michiel Broek |
Removed rc-switch
|
changeset |
files
|
Mon, 23 Jun 2014 20:01:27 +0200 |
Michiel Broek |
Small fix for LCD output
|
changeset |
files
|
Mon, 23 Jun 2014 19:56:54 +0200 |
Michiel Broek |
Fixed compilation
|
changeset |
files
|
Mon, 23 Jun 2014 19:53:33 +0200 |
Michiel Broek |
Added first part of out own protocol
|
changeset |
files
|
Sun, 22 Jun 2014 22:11:33 +0200 |
Michiel Broek |
Fixed makefile
|
changeset |
files
|
Fri, 20 Jun 2014 17:42:36 +0200 |
Michiel Broek |
Compiles with 1-wire bus on PC hardware
|
changeset |
files
|
Thu, 19 Jun 2014 15:49:29 +0200 |
Michiel Broek |
Removed double logging hack
|
changeset |
files
|
Thu, 19 Jun 2014 15:47:16 +0200 |
Michiel Broek |
Write loglines only every 60 seconds
|
changeset |
files
|
Thu, 19 Jun 2014 14:32:33 +0200 |
Michiel Broek |
Added extra decimal for temperature output
|
changeset |
files
|
Fri, 13 Jun 2014 17:43:37 +0200 |
Michiel Broek |
Fixed possible memory leaks
|
changeset |
files
|
Wed, 04 Jun 2014 16:00:35 +0200 |
Michiel Broek |
Simple detection for the same log lines
|
changeset |
files
|
Sat, 31 May 2014 12:00:40 +0200 |
Michiel Broek |
Code fix
|
changeset |
files
|
Sat, 31 May 2014 11:48:49 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Sat, 31 May 2014 11:47:23 +0200 |
Michiel Broek |
Fixed compilation without wiringpi
|
changeset |
files
|
Sat, 31 May 2014 11:39:13 +0200 |
Michiel Broek |
Bumped version, added libxml2 tests to configure
|
changeset |
files
|
Tue, 27 May 2014 23:20:37 +0200 |
Michiel Broek |
Workaround for empty environment at system boot
|
changeset |
files
|
Tue, 27 May 2014 22:24:39 +0200 |
Michiel Broek |
If /home/mbroek is not set, assume root user.
|
changeset |
files
|
Mon, 26 May 2014 23:25:48 +0200 |
Michiel Broek |
More configuration changes. Writing settings implemented.
|
changeset |
files
|
Sun, 25 May 2014 23:29:07 +0200 |
Michiel Broek |
Added writing configuration
|
changeset |
files
|
Sun, 25 May 2014 22:37:23 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Sun, 25 May 2014 22:06:56 +0200 |
Michiel Broek |
Removed library, bumped to version 0.0.7
|
changeset |
files
|
Sun, 25 May 2014 16:39:54 +0200 |
Michiel Broek |
Log allways
|
changeset |
files
|
Fri, 23 May 2014 14:09:07 +0200 |
Michiel Broek |
Fixed temperature logging, added some commands
|
changeset |
files
|
Thu, 22 May 2014 13:54:52 +0200 |
Michiel Broek |
Single client server works
|
changeset |
files
|
Tue, 20 May 2014 22:42:26 +0200 |
Michiel Broek |
Updated dependencies
|
changeset |
files
|
Tue, 20 May 2014 22:40:16 +0200 |
Michiel Broek |
More client/server communications
|
changeset |
files
|
Tue, 20 May 2014 17:07:32 +0200 |
Michiel Broek |
Mirror LCD display on the webpage works
|
changeset |
files
|
Mon, 19 May 2014 17:49:04 +0200 |
Michiel Broek |
Server communication works
|
changeset |
files
|
Sun, 18 May 2014 22:56:43 +0200 |
Michiel Broek |
Initial server code added
|
changeset |
files
|
Sun, 18 May 2014 21:27:07 +0200 |
Michiel Broek |
Corrected missing and obsolete files
|
changeset |
files
|
Sun, 18 May 2014 21:24:55 +0200 |
Michiel Broek |
Code preparation for client/server communication
|
changeset |
files
|
Sat, 17 May 2014 23:06:39 +0200 |
Michiel Broek |
Prepared unix socket communication
|
changeset |
files
|
Sat, 17 May 2014 10:50:16 +0200 |
Michiel Broek |
More Makefiles made simpeler. Version 0.0.6
|
changeset |
files
|
Sat, 17 May 2014 10:41:49 +0200 |
Michiel Broek |
Simplified Makefile
|
changeset |
files
|
Wed, 14 May 2014 23:40:38 +0200 |
Michiel Broek |
Code cleanup
|
changeset |
files
|
Tue, 13 May 2014 16:46:36 +0200 |
Michiel Broek |
Don't block with a missing DHT11 sensor
|
changeset |
files
|
Tue, 13 May 2014 16:33:47 +0200 |
Michiel Broek |
Mosquitto init does several tries before giving up. The DHT11 sensor now uses a temperature offset too.
|
changeset |
files
|
Mon, 12 May 2014 19:45:11 +0200 |
Michiel Broek |
Added lock/pid file
|
changeset |
files
|
Fri, 09 May 2014 22:29:42 +0200 |
Michiel Broek |
Added user log with temperatures and cooler state
|
changeset |
files
|
Fri, 09 May 2014 20:39:01 +0200 |
Michiel Broek |
Added user log function for program data
|
changeset |
files
|
Thu, 08 May 2014 22:36:51 +0200 |
Michiel Broek |
Added library code to read DHT11 temperature/humidity sensor
|
changeset |
files
|
Thu, 08 May 2014 15:09:56 +0200 |
Michiel Broek |
Fix for conditional defines for wiringPi library
|
changeset |
files
|
Wed, 07 May 2014 23:01:18 +0200 |
Michiel Broek |
Improved rc-switch library to be more flexible.
|
changeset |
files
|
Tue, 06 May 2014 21:37:06 +0200 |
Michiel Broek |
Coolers working with a hardcode reference
|
changeset |
files
|
Tue, 06 May 2014 13:24:25 +0200 |
Michiel Broek |
Sensor reading is done in a thread
|
changeset |
files
|
Mon, 05 May 2014 23:33:31 +0200 |
Michiel Broek |
Added coolers program, first draft
|
changeset |
files
|
Mon, 05 May 2014 20:25:20 +0200 |
Michiel Broek |
Better interface for rc-switch library code
|
changeset |
files
|
Mon, 05 May 2014 13:49:53 +0200 |
Michiel Broek |
Read configuraion searches two system paths and users home path. Also the configuration filename must be passed to the rdconfig function
|
changeset |
files
|
Mon, 05 May 2014 10:33:26 +0200 |
Michiel Broek |
Added more conditional compile switches
|
changeset |
files
|
Sun, 04 May 2014 22:29:18 +0200 |
Michiel Broek |
All four types RC switches are now implemented
|
changeset |
files
|
Sun, 04 May 2014 17:30:18 +0200 |
Michiel Broek |
Added 433 MHz transmitter and receiver library and demo programs
|
changeset |
files
|
Sun, 04 May 2014 17:18:27 +0200 |
Michiel Broek |
Added 433 MHz transmitter and receiver library and demo programs
|
changeset |
files
|
Sat, 03 May 2014 23:21:00 +0200 |
Michiel Broek |
Turned LCD backlight off for now
|
changeset |
files
|
Fri, 02 May 2014 23:24:44 +0200 |
Michiel Broek |
wirinPi code is now conditional
|
changeset |
files
|
Fri, 02 May 2014 23:14:50 +0200 |
Michiel Broek |
Tests for wiringPi are now not fatal
|
changeset |
files
|
Fri, 02 May 2014 21:04:20 +0200 |
Michiel Broek |
Version 0.0.2. Added LCD display using wiringPi library. The display is connected via a LCM1602 IIC board.
|
changeset |
files
|
Tue, 29 Apr 2014 20:57:16 +0200 |
Michiel Broek |
Shorter sleep
|
changeset |
files
|
Tue, 29 Apr 2014 17:27:42 +0200 |
Michiel Broek |
Added alias names
|
changeset |
files
|
Sat, 26 Apr 2014 22:53:10 +0200 |
Michiel Broek |
Version 0.0.1, changed data topics to /raw tree
|
changeset |
files
|
Thu, 24 Apr 2014 19:49:30 +0200 |
Michiel Broek |
Deamon code added
|
changeset |
files
|
Thu, 24 Apr 2014 15:12:48 +0200 |
Michiel Broek |
Working reading thermometers and sending data to a MQTT server.
|
changeset |
files
|
Wed, 23 Apr 2014 21:29:37 +0200 |
Michiel Broek |
Loop runs
|
changeset |
files
|
Wed, 23 Apr 2014 21:17:44 +0200 |
Michiel Broek |
Config now reads sensors configuration
|
changeset |
files
|
Wed, 23 Apr 2014 17:19:00 +0200 |
Michiel Broek |
Server communication seems ok, can handle server shutdowns too.
|
changeset |
files
|
Wed, 23 Apr 2014 14:25:09 +0200 |
Michiel Broek |
Added library
|
changeset |
files
|
Tue, 22 Apr 2014 23:28:17 +0200 |
Michiel Broek |
Can connect and disconnect
|
changeset |
files
|
Tue, 22 Apr 2014 17:34:24 +0200 |
Michiel Broek |
Cleanup config.h
|
changeset |
files
|
Tue, 22 Apr 2014 17:30:19 +0200 |
Michiel Broek |
Added config.h.in
|
changeset |
files
|
Tue, 22 Apr 2014 17:26:30 +0200 |
Michiel Broek |
Basic package is complete
|
changeset |
files
|
Tue, 22 Apr 2014 17:08:15 +0200 |
Michiel Broek |
Added aclocal
|
changeset |
files
|
Tue, 22 Apr 2014 16:46:27 +0200 |
Michiel Broek |
Added two sources
|
changeset |
files
|
Tue, 22 Apr 2014 16:34:02 +0200 |
Michiel Broek |
Initial set of files
|
changeset |
files
|