Sat, 04 May 2024 19:10:03 +0200 |
Michiel Broek |
Different gettid() test
|
file |
diff |
annotate
|
Sat, 04 May 2024 17:37:47 +0200 |
Michiel Broek |
Added test for gettid()
|
file |
diff |
annotate
|
Sat, 04 May 2024 15:43:37 +0200 |
Michiel Broek |
Version 0.9.19
|
file |
diff |
annotate
|
Thu, 02 May 2024 15:49:16 +0200 |
Michiel Broek |
Version 0.9.19b3. The simulator thread can be paused to be able to add and delete simulators. Added simulated door and PSU status. Devices can now fully use multiple simulators. Better rounding of simulated temperature values. The server SIMULATOR DEL and ADD commands pause the simulator when the linked list is manipulated. Fixed SIGSEGV when a simulator is added. Added socket SO_REUSEADDR again to the server socket.
|
file |
diff |
annotate
|
Tue, 30 Apr 2024 17:26:41 +0200 |
Michiel Broek |
Version 0.9.19b2. Simulator redesign and it is now possible to run more then one simulator. All simulated devices have address names that include the simulator number. Added the setup screen for the most part. Not compatible with previous versions if a simulator was used, delete all simulators and simulated devices during stop and start.
|
file |
diff |
annotate
|
Thu, 25 Apr 2024 16:44:54 +0200 |
Michiel Broek |
Version 0.9.19b1. Less noisy logging.
|
file |
diff |
annotate
|
Thu, 25 Apr 2024 14:26:47 +0200 |
Michiel Broek |
Version 0.9.19a6. Fixes after a short trial on the production controller. Fixed json for alternate beer termperature sensor. Fixed division by 1000 for the room temperature and humidity values. The dropdown list for devices shows the address instead of description in the list.
|
file |
diff |
annotate
|
Wed, 24 Apr 2024 21:58:27 +0200 |
Michiel Broek |
Version 0.9.19a5
|
file |
diff |
annotate
|
Wed, 24 Apr 2024 20:44:56 +0200 |
Michiel Broek |
Version 0.9.19a4
|
file |
diff |
annotate
|
Mon, 22 Apr 2024 13:40:21 +0200 |
Michiel Broek |
Version 0.9.19a3. Fixed segfault in onewire temperature measurement. Fixed json error in onewire device.
|
file |
diff |
annotate
|
Mon, 22 Apr 2024 11:33:04 +0200 |
Michiel Broek |
Version 0.9.19a2. Dropped TEMPSTATE[] and only use DEVPRESENT[] to mark devices state. Adjusted webpages for this switch in responses. Adjusted MySQL mon_fermenters enum values too. Rename some global Config records to better reflect their real use.Added one-wire json records and websocket. Announce when some onewire device changes. Add UNITS JSON command without parameter. Dropped global tempFormat setting that was never used.
|
file |
diff |
annotate
|
Sat, 20 Apr 2024 11:34:00 +0200 |
Michiel Broek |
Version 0.9.19a1
|
file |
diff |
annotate
|
Sat, 13 Apr 2024 16:50:26 +0200 |
Michiel Broek |
Added websockets to thermferm. Started new www directory for websocket enabled web. The init script now waits until thermferm is completely stopped.
|
file |
diff |
annotate
|
Thu, 11 Apr 2024 15:01:46 +0200 |
Michiel Broek |
Version 0.9.18
|
file |
diff |
annotate
|
Sun, 07 Apr 2024 11:25:00 +0200 |
Michiel Broek |
Version 0.9.17a3. Prepare for thermferm state tables.
|
file |
diff |
annotate
|
Fri, 05 Apr 2024 19:30:41 +0200 |
Michiel Broek |
Version 0.9.17a2. Disabled a lot of mutex locks, some are blocking and need to be fixed. This version seems to be working, more or less.
|
file |
diff |
annotate
|
Fri, 05 Apr 2024 16:19:39 +0200 |
Michiel Broek |
Version 0.9.17a1. Revised starting and stopping the threads. Fixed stopping the command server thread. Moved one-wire tempeature sensors resolution correction to the one-wire thread. The devices thread fetches temperatures from the one-wire thread. The one-wire thread does everything for the temperature sensors. The command server uses private sockets. Still, only one session at the same time is handled.
|
file |
diff |
annotate
|
Wed, 27 Mar 2024 18:59:39 +0100 |
Michiel Broek |
Version 0.9.17
|
file |
diff |
annotate
|
Mon, 25 Mar 2024 11:44:45 +0100 |
Michiel Broek |
Version 0.9.16. Final changes DHT11 reading via sysfs.
|
file |
diff |
annotate
|
Sat, 16 Mar 2024 11:54:46 +0100 |
Michiel Broek |
Impoved SDL configure checks
|
file |
diff |
annotate
|
Sat, 16 Mar 2024 11:09:43 +0100 |
Michiel Broek |
Version 0.9.15
|
file |
diff |
annotate
|
Fri, 15 Mar 2024 20:57:49 +0100 |
Michiel Broek |
Add --enable-wiringpi to configure script to allow to disable wiringpi even when it is installed. Use SDL2 instead of partly old SDL.
|
file |
diff |
annotate
|
Thu, 14 Mar 2024 17:10:14 +0100 |
Michiel Broek |
Version 0.9.14
|
file |
diff |
annotate
|
Sat, 25 Feb 2023 10:53:42 +0100 |
Michiel Broek |
Version 0.9.13. Close socket after use, fixes too much files open.
|
file |
diff |
annotate
|
Mon, 13 Feb 2023 16:39:03 +0100 |
Michiel Broek |
Version 0.9.12
|
file |
diff |
annotate
|
Sun, 10 Jul 2022 14:33:13 +0200 |
Michiel Broek |
Version 0.9.11. Removed lcd debug message after 7 years. Added setup for alternative beer sensor. If the main sensor is gone, the alternative will be used.
|
file |
diff |
annotate
|
Sat, 12 Sep 2020 16:50:35 +0200 |
Michiel Broek |
Version 0.9.10.
|
file |
diff |
annotate
|
Mon, 18 May 2020 11:03:40 +0200 |
Michiel Broek |
Version 0.9.9 Don't flag fermenter death if the unit is turned off. Fix a wrong log message. Send unit data even if the unit is turned off.
|
file |
diff |
annotate
|
Sat, 25 Apr 2020 20:31:31 +0200 |
Michiel Broek |
Version 0.9.8. Added extra path to the fonts for Debian buster. Changed the PID to work on Proportional on Measurement. Added loops so that it looks like the PID is running at 100 mSec intervals.
|
file |
diff |
annotate
|
Mon, 04 Nov 2019 13:19:27 +0100 |
Michiel Broek |
Version 0.9.7. Increased the maximum fermentation temperature to 45 degrees to allow Kveik fermentations.
|
file |
diff |
annotate
|
Sun, 07 Jul 2019 13:54:24 +0200 |
Michiel Broek |
Version 0.9.6
|
file |
diff |
annotate
|
Sat, 27 Apr 2019 15:36:16 +0200 |
Chiel Broek |
Version 0.9.5, interior lights are now only controlled by the open door or a 5 minutes timer. The timer is started via an MQTT command. The BMS web application sends this command just before a webcam page is requested.
|
file |
diff |
annotate
|
Wed, 27 Feb 2019 22:21:20 +0100 |
Michiel Broek |
Version 0.9.4 Handle yeast temperature limits per fermenter.
|
file |
diff |
annotate
|
Thu, 07 Feb 2019 14:59:47 +0100 |
Michiel Broek |
Version 0.9.3. Splitted the temperature low and high settings in fridge and beer mode.
|
file |
diff |
annotate
|
Sun, 20 Jan 2019 13:34:09 +0100 |
Michiel Broek |
Version 0.9.2 DLOG messages every minute unless a unit is off. More event messages added. The target temperatur is now taken from the PIDs.
|
file |
diff |
annotate
|
Sat, 19 Jan 2019 11:38:09 +0100 |
Michiel Broek |
Version 0.9.1. Added fermentation profiles via MQTT. Added uuid field for loaded product. Removed some debug messages in the simulator. Removed dead code and debug messages from the lcd driver.
|
file |
diff |
annotate
|
Thu, 10 Jan 2019 16:33:42 +0100 |
Michiel Broek |
Version 0.9.0. Implemented DCMD via mqtt to set stage, mode, setpoint low and high. Implemeted DCMD via mqtt to set heater, cooler, fan and light state. Implemented DCMD via mqtt to set product code and name. Set the PID's in fridge mode without idle range offset, that was an old leftover setting that was obsolete.
|
file |
diff |
annotate
|
Fri, 24 Aug 2018 15:43:32 +0200 |
Michiel Broek |
Versie 0.8.9
|
file |
diff |
annotate
|
Sat, 04 Aug 2018 16:29:12 +0200 |
Michiel Broek |
Versie 0.8.8 Fermentation stage implemented in units.
|
file |
diff |
annotate
|
Fri, 03 Aug 2018 16:13:17 +0200 |
Michiel Broek |
Versie 0.8.7. Fixed a lot of memory leaks with the aid of valgrind.
|
file |
diff |
annotate
|
Thu, 02 Aug 2018 12:20:06 +0200 |
Michiel Broek |
Versie 0.8.6 De mosquitto library is geen optie meer maar verplicht.
|
file |
diff |
annotate
|
Tue, 31 Jul 2018 16:42:11 +0200 |
Michiel Broek |
Versie 0.8.5. Implementatie product code en product naam. Implementatie DLOG MQTT berichten. Verminderde server rotocol debug berichten.
|
file |
diff |
annotate
|
Wed, 25 Jul 2018 12:24:17 +0200 |
Michiel Broek |
Versie 0.8.4. Init script toegevoegd inclusief make install.
|
file |
diff |
annotate
|
Mon, 23 Jul 2018 14:41:21 +0200 |
Michiel Broek |
Versie 0.8.3. Enkele debug console berichten verwijderd. De MQTT NCMD reboot en rebirth commando's geimplementeerd.
|
file |
diff |
annotate
|
Sat, 21 Jul 2018 20:40:02 +0200 |
Michiel Broek |
Versie 0.8.2. Node NBIRTH payload heeft nu netwerk informatie.
|
file |
diff |
annotate
|
Fri, 20 Jul 2018 21:37:45 +0200 |
Michiel Broek |
Versie 0.8.1. Geen DDATA als fermenter uit staat. Profile JSON formaat is nu werkend.
|
file |
diff |
annotate
|
Thu, 19 Jul 2018 14:08:32 +0200 |
Michiel Broek |
Versie 0.8.0. Fixed eerste DBIRTH fout geinitialiseerde waardes.
|
file |
diff |
annotate
|
Wed, 18 Jul 2018 13:26:37 +0200 |
Michiel Broek |
Versie 0.6.8. Code cleanup. Publish NDATA MQTT bericht iedere 5 minuten of als er een THB wijziging is.
|
file |
diff |
annotate
|
Mon, 16 Jul 2018 17:23:22 +0200 |
Michiel Broek |
Versie 0.6.7. Globale uuid toegevoegd voor de NBIRTH payload.
|
file |
diff |
annotate
|
Sun, 15 Jul 2018 14:39:07 +0200 |
Michiel Broek |
Versie 0.6.6. Subprojecten mash, rc433 en dht11 verwijderd.
|
file |
diff |
annotate
|
Sun, 15 Jul 2018 12:05:16 +0200 |
Michiel Broek |
Versie 0.6.5. LIST LOG <unit> commando verwijderd, alleen ARCHIVE LOG <unit> is nog in gebruik. De chiller temperatuur zit nu ook in de log en grafiek.
|
file |
diff |
annotate
|
Sat, 14 Jul 2018 21:15:20 +0200 |
Michiel Broek |
Versie 0.6.4. Aan de global setup de MQTT instellingen toegevoegd. Die zijn er ook als MQTT niet op het systeem aanwezig is. Indien het de global setup wijzigd, wordt de MQTT verbinding opnieuw gemaakt.
|
file |
diff |
annotate
|
Sat, 14 Jul 2018 17:21:25 +0200 |
Michiel Broek |
Versie 0.6.3. MQTT device berichten alleen als een fermenter ingeschakeld is. MQTT fermenter birth en death berichhten als een fementer in of uitgeschakeld wordt. MQTT node death bericht bij normaal afsluiten van de daemon. Alle MQTT persistent berichten worden nu goed opgeruikmd.
|
file |
diff |
annotate
|
Mon, 26 Jun 2017 19:27:21 +0200 |
Michiel Broek |
Version 0.6.2 released.
|
file |
diff |
annotate
|
Wed, 07 Jun 2017 23:06:47 +0200 |
Michiel Broek |
Version 0.6.1 added support for domoticz mqtt sensors.
|
file |
diff |
annotate
|
Fri, 19 May 2017 16:34:21 +0200 |
Michiel Broek |
Version 0.6.0. The MQTT data messages are now allways the same length so that openhab will function with the message updates.
|
file |
diff |
annotate
|
Mon, 08 May 2017 16:26:02 +0200 |
Michiel Broek |
New MQTT protocol
|
file |
diff |
annotate
|
Sat, 29 Apr 2017 17:07:36 +0200 |
Michiel Broek |
Added some MQTT publish clear functions. Version 0.5.8
|
file |
diff |
annotate
|
Wed, 11 May 2016 14:47:27 +0200 |
Michiel Broek |
Fixed some MQTT messages. Added more profile MQTT messages. Version 0.5.7
|
file |
diff |
annotate
|
Mon, 09 May 2016 21:37:25 +0200 |
Michiel Broek |
Bumped to version 0.5.6
|
file |
diff |
annotate
|